光洋電機 Product Lineup

● Equivalent to 20W and 40W straight tubes ● Rated input voltage 100-240V ● Dual-sided power supply / Built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but in some cases of fixtures using starter tubes, wiring work can be omitted for use. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a risk of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use with circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.

• LED fluorescent lamp

● Equivalent to 6.55W straight tube ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but in some cases, lighting fixtures using a starter can be used without wiring work. (*) For fixtures using a starter, you can use the included dummy starter to avoid wiring work. (*) When using the dummy starter, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter and perform the wiring work for single-sided power supply.

• LED fluorescent lamp

Oven lamp / Heat resistant up to 300°C (maximum ambient temperature 450°C when the lamp is off) For use with shielded lighting fixtures only.

• Metal halide lamp

Hf32W×2 lamp type (5200lm) / FL40W×1 lamp type (2000lm) □ A gentle shape that integrates seamlessly with the ceiling □ Two sizes available to match existing fluorescent fixture dimensions: width 230mm and width 160mm Tolerance space for suspension bolts of 33mm, soft attachment and detachment, and a special spring structure that is resistant to vibration □ High efficiency [Ra83 160lm/W] with a high level of energy-saving performance Approximately 60-70% energy savings compared to conventional fluorescent lamps Standard specifications include Ra83 and 5000K in the lineup

• LED lighting

● Equivalent to 20W straight tube FL20, FLR20 ● Rated input voltage 100-240V ● One-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but some fixtures using starter tubes can be used without wiring work. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a risk of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for one-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use with circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.

• LED fluorescent lamp

● Equivalent to a straight tube 40W FL40, FLR40, (FHF32) ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Generally, wiring work on the lighting fixture side is required, but in some cases of fixtures using starter tubes, it can be used without wiring work. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a risk of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use with circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances. ■ The ST8A-1.2M 21.5W/850 100-242V EMHO does not include a dummy starter tube.

• LED lighting

- Automatically charges the battery while in use - Automatically lights up like an emergency light when a power outage is detected - Portable with the included switch-equipped socket - Can be used as an emergency flashlight by gripping the base - Equivalent to a standard 50W daylight white bulb - PSE certified * For product details, please refer to the "Product Catalog" and "Specifications."

• LED fluorescent lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other lighting equipment

Stable brightness even in high-temperature environments. The OSRAM HALOPIN OVEN G9 is a halogen lamp designed specifically for ovens. With heat resistance and clear light, it effectively supports the finishing of your cooking.

• Other lighting equipment

Despite its compact design with a G9 base, it achieves a solid brightness. The sharp and beautiful light enhances the space and displays.

• Other lighting equipment

Three types: GL10, GL15, GL30. Long-life type with a rated lifespan of 10,800 hours, used for sterilizing air, water, and objects. Emits ultraviolet radiation with sterilizing effects around a wavelength of 254nm. *Note: The 30 type (GL30) is a special size, so its dimensions differ from standard fluorescent lamps (FL30W: L630mm). The compatible starter is FG-4P, so please be careful. [Usage Precautions] - Do not look directly at the light with the naked eye while it is on. - Ensure that reflected light does not enter the eyes, as it can cause eye pain or vision impairment. - Do not expose skin directly to ultraviolet light, as it can cause skin inflammation. - Always use with dedicated equipment. Do not use for general lighting purposes. - Due to the effects of ultraviolet radiation, degradation of surrounding materials such as resin will occur more quickly than with standard lamps.

• Fluorescent lamp

Single-sided power supply / Built-in power type General lighting at ambient temperatures of -20 to +45°C Glass lamp tube with shatterproof function (e.g., for food industry applications) 【Safety Advice】 Not suitable for use with electronic control devices. If appropriate moisture-proof lighting fixtures are used according to the data sheet and installation instructions, outdoor use is also possible. There are limitations to the operating temperature range of the LED tube. If you have any questions about suitability for your application, please measure the surface temperature (Tc) of the product before installation.

• LED fluorescent lamp

LED STAR PIN 10 0.9W/2700K ⇒ Equivalent to halogen lamp OSRAM 64405S (J12V5WS) LED STAR PIN 20 1.8W/2700K ⇒ Equivalent to halogen lamp OSRAM 64415 (J12V10W-AXS) LED STAR PIN 30 2.4W/2700K ⇒ Equivalent to halogen lamp OSRAM 64425 (J12V20W-AXS) 【Please check if the cylindrical shape near the base fits your fixture.】

• LED fluorescent lamp

* Three types: FHT24W type, FHT32W type, FHT42W type * Three light colors: warm white, white, daylight white - Specifications that allow the existing ballast to be used as is. - Minimizes the burden on the site, enabling a smooth transition to LED equipment updates. - Provides equivalent brightness with a natural light similar to existing compact fluorescent lamps. - Reduces power consumption compared to existing compact fluorescent lamps. - Limits the number of replacements due to a rated lifespan of 30,000 hours. - Lowers running costs and contributes to long-term cost reduction. *For product details, please refer to the "Product Catalog" and "Specifications."*

• LED fluorescent lamp

According to the international treaty "Minamata Convention on Mercury," the production of fluorescent lamps will end in 2027. We kindly ask you to consider making your purchase soon.

• Fluorescent lamp

Based on the international treaty "Minamata Convention on Mercury," the production of fluorescent lamps will end in 2027. We kindly ask you to consider making your purchase soon.

• Fluorescent lamp

◇Use for indoor equipment only. (Causes of failure due to water droplets, condensation, temperature rise, and short lifespan) ◇Use in an environment where the surrounding temperature of the lamp is between -20℃ and 40℃, and ensure that the fixture is not exposed to direct sunlight during the day when lit. (Causes of failure due to water droplets, condensation, temperature rise, and short lifespan) ◇Use with fixtures connected to indoor wiring. (Causes of short lifespan due to high voltage) *Do not use with dimmers as it is not compatible; using it at 100% dimming may cause a short lifespan of the lamp. *Do not modify or process the product. *Do not use with direct current. *Do not use with circuits, emergency lighting fixtures, induction light fixtures, or HID (mercury and others) fixtures.

• LED fluorescent lamp

【Replacement for incandescent bulbs, from EFD】 - LDT7 → Equivalent to 50W incandescent bulb / Equivalent to EFD10 (※ Slightly brighter) - LDT9 → Equivalent to 70W incandescent bulb / Equivalent to EFD15 (※ Slightly brighter) ◆ Wide beam type with a beam angle of 200° ◆ Side-inserted downlight ◆ Compatible with damp-proof and rain-proof fixtures, sealed fixtures, and insulation installation fixtures ◆ Not compatible with dimmers

• LED fluorescent lamp

● Input voltage range: 100-242V ● Single-side power supply / Built-in power supply type ● Made of polycarbonate ● Slim & user-friendly G13 socket design Adopts the same G13 socket as conventional fluorescent lamps (FL fixtures, Hf fixtures), allowing for direct replacement in existing fluorescent lamp fixtures. The tube diameter is approximately 26mm, making it slim enough to fit smoothly into existing fixtures. *It is necessary to remove the ballast during electrical work. ● Energy efficiency and energy-saving effect Maintains high efficiency while providing brightness comparable to conventional FL and Hf fluorescent lamps. Specifications can be selected according to the application. ● Rotatable socket for freedom of light direction Allows for angle adjustment by rotating the socket, independent of the shape of existing fluorescent fixtures. Light can be directed towards walls or displays as desired. By adjusting the direction of the light, it can be utilized efficiently, enhancing the spatial experience. ● Adoption of single-side power supply Wiring uses a single-side supply. During installation, it is necessary to remove the ballast from the existing fluorescent lamp fixture and connect directly with a single-side power supply.

• LED fluorescent lamp

◇Use for indoor equipment only. (Causes of failure due to water droplets, condensation, temperature rise, and short lifespan) ◇Use in a location where the ambient temperature of the lamp is between -20℃ and 40℃, and where the fixture is not exposed to direct sunlight during the day. (Causes of failure due to water droplets, condensation, temperature rise, and short lifespan) ◇Use with fixtures connected to indoor wiring. (Causes of short lifespan due to high voltage) *Please do not modify or process. *Do not use with direct current under any circumstances. *Do not use with circuits, emergency lighting fixtures, induction light fixtures, or HID (mercury lamps, etc.) fixtures under any circumstances. ■Compatibility has been confirmed with the incandescent dimmer "Toshiba: DG9048N"■ ■LED dimmers are generally compatible■ (However, depending on the type of dimmer, complete dimming may not be possible due to flickering and other issues.)

• Other consumables

It can be replaced with compact fluorescent lamps FHT32W from various manufacturers. The rated lifespan is 20,000 hours, which is longer than the standard 10,000 hours.

• Other consumables

It can be replaced with compact fluorescent lamps FHT42W from various manufacturers. The rated lifespan is 20,000 hours, which is longer than the standard 10,000 hours.

• Other consumables

◆Compact fluorescent lamp (EFD), for replacement of incandescent bulbs ◆Brightness equivalent to a 50W incandescent bulb ◆Light spread in all directions (200 degrees) ◆Side-inserted downlight ◆Compatible with damp-proof, rain-proof fixtures, sealed fixtures, and insulated installation fixtures ◆Not compatible with dimmers

• LED fluorescent lamp

Equivalent to a standard 60W incandescent bulb - Approximately 80% energy saving - Lifespan about 8 times longer

• Other consumables

Halogen lamp 12V Base G4 Type ST PIN 10 (0.9W) → 64405S (J12V5WS) ST PIN 20 (1.8W) → 64415S (J12V10W-AXS) ST PIN 30 (2.4W) → 64425S (J12V20W-AXS)

• Other consumables

Halogen lamp 12V Base G4 Type ST PIN 10 (0.9W) → 64405S (J12V5WS) ST PIN 20 (1.8W) → 64415S (J12V10W-AXS) ST PIN 30 (2.4W) → 64425S (J12V20W-AXS)

• Other consumables

Halogen lamp 12V Base G4 Type ST PIN 10 (0.9W) → 64405S (J12V5WS) ST PIN 20 (1.8W) → 64415S (J12V10W-AXS) ST PIN 30 (2.4W) → 64425S (J12V20W-AXS)

• Other consumables

Base (standard designation): G5 Tube diameter: 16 mm 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• Other consumables

Base (standard designation): G13 Tube diameter: 26 mm 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• Other consumables

Single-ended four-pin plug-in 2G7 base 　　865　Cool Daylight 　　840　Cool White 　　830　Warm White 　　827　LUMILUX INTERNA

• Other consumables

Single-ended four-pin plug-in G24q base 865 Cool Daylight 840 Cool White 830 Warm White 827 LUMILUX INTERNA

• Other consumables

Single-ended four-pin plug-in 2G11 base 865 Cool Daylight 840 Cool White 830 Warm White 827 LUMILUX INTERNA

• Other consumables

Single-ended two-pin plug-in G23 & GX23 base 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• Fluorescent lamp

Single-ended two-pin plug-in G24d base 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• Other consumables

Beam spread: SP: Narrow angle (10°) FL: Medium angle (24°) Color temperature: WDL: 3000K

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the former Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Metal halide lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Other consumables