シリコンデバイス List of Products and Services

The "CA9546" is a low-voltage 4-channel bidirectional switch with a reset function controlled by I2C/SMBus. One master can access one set of slave devices or any combination of four sets of slave devices via the I2C or SMBus interface. It is ideal for servers and communication equipment.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CA9617" is a CMOS integrated circuit that provides level shifting between low voltage (0.8V to 5.5V) and high voltage (2.2V to 5.5V) Fast-mode Plus (FM+) I2C bus or SMBus applications. It is ideal for servers, routers (communication switches), industrial equipment, and products with numerous I2C slaves or long PCB traces.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

"CA9555V" is a 16-bit remote GPIO expander. It provides remote GPIO expansion to most MCU families via I2C or SMBus interface. It is ideal for servers and communication equipment.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CHT8305C" is a digital humidity and temperature sensor with a humidity accuracy of ±3.0% RH and a temperature accuracy of ±0.5°C. It supports I2C and 2-wire interfaces, making it ideal for HVAC and environmental monitoring applications.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CHT8325" is a digital humidity and temperature sensor with a humidity accuracy of ±1.5% RH and a temperature accuracy of ±0.1°C. It supports SMBus and I2C interfaces, making it ideal for HVAC, refrigeration, and environmental monitoring applications.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CHT8336A" is an analog output type temperature and humidity sensor IC with a humidity accuracy of ±2.0% RH and a temperature accuracy of ±0.2°C. It supports a wide supply voltage range of 1.8V to 5.5V, enabling low power consumption and high-precision measurements. Humidity and temperature data are directly output from different IO pins. Individual temperature and humidity calibration is performed at the factory before shipment, eliminating the need for readjustment. It incorporates a high-precision bandgap circuit, an A/D converter, a calibration circuit with non-volatile memory, and two DAC outputs. The package uses DFN2x2-4.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CT1721" is a temperature sensor IC with a pulse count interface. The application only requires an external pull-up resistor. The DIO pin of this chip can be directly connected to the GPIO pin of the MCU, and since devices in single conversion mode do not require MCU timer resources, it can reduce the software overhead of the MCU. Additionally, it integrates a bandgap circuit, an AD converter, and a digital interface, providing an open-drain output. The DIO pin serves both as a power supply and a digital pulse output (open-drain). When the DIO pin is powered through a pull-up resistor, the chip begins temperature measurement and continues to send temperature data via pulse count until the MCU pulls the DIO pin low. This chip can connect up to nine sensors to the same MCU I/O pin, distinguished by an address code (set by the user using the AD0 and AD1 pins). It also supports temperature measurement in either single conversion or continuous conversion mode.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CTF2304" is a system-level thermal management solution chip. Temperature, voltage, and fan speed data can be read directly via the SMBus/I2C bus interface. It also features eight remote channels for monitoring the temperature of external diode-connected transistors, each of which can be configured as single-ended or differential input voltage sensing. The "CTF2304" provides a powerful solution that integrates multiple thermal management functions, including temperature monitoring, fan control, and fault detection.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

The "CAD2726" is a current shunt and power monitor IC equipped with an I2C interface. It monitors both the shunt voltage drop and the bus supply voltage. This device can directly read current in amperes and power in watts by combining programmable calibration values, conversion time, and averaging options with an internal multiplier. The I2C interface supports up to 16 types of programmable addresses.

• Other energy equipment
• Power Monitoring Equipment

The "CT7117" is a high-precision digital temperature sensor with an accuracy of ±0.1℃. Temperature data can be read directly via a digital interface compatible with SMBus and I2C through an MCU, Bluetooth chip, or SoC chip. The CT7117 supports I2C communication speeds of up to 3.0MHz. Each chip is calibrated at the factory before shipment within a range of 20℃ to 50℃, ensuring an accuracy of up to ±0.1℃, so there is no need for recalibration. This chip includes a high-precision bandgap circuit, a 16-bit A/D converter (with a resolution of 0.0078125℃), a calibration unit (with non-volatile memory), and a digital interface block.

• Sensors
• Temperature Sensor
• Thermo-hygrometer

Silicon Device Co., Ltd. (Headquarters: Yokohama City, Kanagawa Prefecture) has added the STURDeCAM31_CUOAGX, a 3MP 120dB HDR camera for autonomous mobility equipped with the Sony ISX031 sensor from e-con Systems, to its lineup. 【Product Page】 https://www.e-consystems.com/jp/nvidia-cameras/jetson-agx-orin-cameras/sony-isx031-ip69k-hdr-gmsl2-camera-jp.asp 【Main Features】 ✔ Strong in low light conditions. ✔ Maximum dynamic range of 120dB. ✔ Tough & compact design: Durable and lightweight compact size compliant with IP69K standards. ✔ Advanced synchronized multi-camera system: Up to 8 cameras can be synchronized. ✔ LED Flicker Mitigation (LFM) feature: Maintains flicker-free high-quality video. ✔ GMSL2 interface: Stable connection even with cable lengths of up to 15m. ✔ Wide-angle (128.7°) lens usage option: Covers a broad field of view. Please feel free to contact us if you need more detailed information.

• Color camera

Silicon Device Co., Ltd. (Headquarters: Yokohama City, Kanagawa Prefecture) has added the RouteCAM_CU22_IP67, an outdoor ultra-low-light GigE HDR camera manufactured by e-con Systems, to its lineup. 【Product Page】 https://www.e-consystems.com/jp/gige-cameras/sony-starvis-imx662-2mp-ip67-camera-jp.asp 【Main Features】 ✔ Ultra-low-light HDR performance: Equipped with Sony Starvis 2 IMX662 sensor ✔ Tough outdoor design: Compliant with IP67 and wide temperature range (-30°C to 70°C) ✔ High-performance PoE camera: GigE connection, PTP time synchronization, and transmission up to 100m The RouteCAM_CU22_IP67 is an outdoor HDR PoE camera compliant with IP67. It supports 1080p @ 60fps streaming and can output in H.265/H.264/MJPEG formats. It supports PoE power supply and PTP time synchronization, ensuring reliable video transmission even over cable lengths of up to 100m. Please feel free to contact us if you need more detailed information.

• Color camera

Silicon Device Co., Ltd. has now added the e-CAM56_CUOAGX, a 5MP camera module equipped with the Sony Pregius S IMX568 sensor from e-con Systems, to its lineup. 【Product Page】 https://www.e-consystems.com/jp/nvidia-cameras/jetson-agx-orin-cameras/5mp-imx568-global-shutter-mipi-camera-jp.asp 【e-CAM56_CUOAGX | Key Features】 ✔ High Frame Rate: Capable of multi-ROI shooting at up to 1164 fps ✔ Flexible Connectivity: Connect up to 4 cameras ✔ Customizable Lens Holder: Compatible with various optical components using an M12 lens holder The e-CAM56_CUOAGX is a high-performance camera optimized for the NVIDIA Jetson AGX Orin developer kit. It enables high-speed data transfer through the MIPI CSI-2 interface. With high sensitivity, fast performance, and multifunctionality, the e-CAM56_CUOAGX is an essential camera module for future technologies.

• Color camera

Silicon Device Corporation has recently added the FHD camera module "e-CAM22_CURZH" from e-con Systems to its lineup. The e-CAM22_CURZH is an FHD camera module equipped with the Sony STARVIS IMX462 CMOS sensor, boasting ultra-low light performance. It can be directly connected to the Renesas RZ/V2H development kit, allowing for a multi-camera configuration of up to four units. It features an S-mount lens holder, enabling easy lens customization according to application needs. 【Product Page】 https://www.e-consystems.com/jp/renesas/sony-starvis-imx462-ultra-low-light-camera-for-renesas-rz-v2h-jp.asp 【e-CAM22_CURZH | Key Features】 ✔ Clear in the dark: Equipped with a high-sensitivity sensor capable of capturing images in 0 lux environments ✔ High frame rate: Achieves smooth video at 60fps for both FHD and HD ✔ High-speed data transfer: Utilizes a 4-lane MIPI CSI-2 interface Please feel free to contact us if you need more detailed information.

• Color camera

Silicon Device Corporation (Headquarters: Yokohama City, Kanagawa Prefecture) has added the next-generation GMSL2 camera, STURDeCAM34_CUOAGX, manufactured by e-con Systems, to its lineup. The STURDeCAM34_CUOAGX is the world's first plug-and-play 3MP GMSL2 camera equipped with the onsemi AR0341 sensor. With a maximum HDR of 140dB and super exposure pixel technology, it minimizes latency without the need for automatic exposure control. It is also compatible with the NVIDIA Jetson AGX Orin, allowing for synchronization of up to 8 cameras, and features an IP69K certified waterproof and dustproof design that can withstand temperatures from -40°C to 85°C, all in a compact and lightweight design suitable for a wide range of applications. 【Product Page】 https://www.e-consystems.com/jp/nvidia-cameras/jetson-agx-orin-cameras/3mp-ar0341at-ip69k-gmsl2-140db-hdr-camera-jp.asp The STURDeCAM34_CUOAGX is ideal for advanced ADAS, industrial inspection, and robotics. Experience the next generation of visual solutions with cutting-edge HDR technology.

• Color camera

Silicon Device Co., Ltd. (Headquarters: Yokohama City, Kanagawa Prefecture) has recently added the next-generation HDR camera, See3CAM_CU31, manufactured by e-con Systems, to its lineup. The See3CAM_CU31 is a 3MP HDR USB camera equipped with a Sony ISX031 sensor. It achieves a wide dynamic range of up to 120dB through sub-pixel HDR technology. With LED flicker reduction support, it provides clear images without motion blur even in low-light conditions. The use of an M12 (S-mount) lens holder allows for lens exchange according to application needs. Thanks to USB 3.2 Gen 1 (Type-C) and UVC compliance, it enables easy setup without the need for additional drivers. 【Product Page】 https://www.e-consystems.com/jp/usb-cameras/sony-isx031-120db-hdr-camera-jp.asp 【Key Features】 ✅ High-performance Sony ISX031 sensor: Overwhelming HDR images ✅ Low-light performance: Reliable visibility even in backlight and dark conditions ✅ Flexible lens selection: Suitable for a wide range of applications ✅ Excellent compatibility and ease of use

• Color camera

Silicon Device Corporation (Headquarters: Yokohama City, Kanagawa Prefecture) has recently added the ultra-high-speed monochrome USB camera, See3CAM_37CUGM, manufactured by e-con Systems, to its lineup. The See3CAM_37CUGM is a professional-grade camera that provides high-quality images even under harsh lighting conditions and high-speed operating environments. It is ideal for ultra-high-speed applications such as conveyor systems and smart surveillance. 【Product Page】 https://www.e-consystems.com/jp/usb-cameras/sony-imx900-global-shutter-hdr-monochrome-camera-jp.asp 【Sales Points】 ✅ Ultra-high-speed shooting up to 1,000,000 fps and global shutter to reduce motion blur. ✅ Quad HDR (up to 120dB) and NIR compatibility for clear images even in environments with significant brightness differences. ✅ Self-trigger function allows for automatic shooting based on specific actions. ✅ USB 3.2 Gen1 & UVC compliant, Type-C compatible, no additional drivers required. If you need more detailed information, please feel free to contact us.

• Monochrome camera

Silicon Device Co., Ltd. (Headquarters: Yokohama, Kanagawa Prefecture) has added the high-performance 4K RBG-IR USB 3.2 Gen 1 camera, See3CAM_CU83, manufactured by e-con Systems, to its lineup. The See3CAM_CU83 is a next-generation 4K USB camera that can stream RGB and IR frames simultaneously. It features a proprietary patented RGB-IR separation algorithm that captures visible light and infrared data with high precision without degrading color components. It is ideal for applications that require high-quality images day and night, such as security, surveillance, and industrial automation. 【Product Page】 https://www.e-consystems.com/jp/usb-cameras/8mp-4k-rgb-ir-usb3-camera-jp.asp 【See3CAM_CU83 | Features】 ✅ Equipped with a high-performance 8MP AR0830 RGB-IR camera module ✅ USB 3.2 Gen 1 (Type-C) plug-and-play compatible ✅ UVC compliant (no additional drivers required) and supports major operating systems ✅ 4K @15fps & Full HD @30fps video streaming

• Color camera

The CHT8315 is a low-voltage digital humidity and temperature sensor with a humidity accuracy of ±3.0% RH (maximum) and a temperature accuracy of ±0.5°C (maximum). Humidity and temperature data can be read directly through a digital interface via an MCU, Bluetooth chip, or SoC chip. For inquiries regarding Sensylink's CHT8315, please contact Silicon Devices Co., Ltd.

• Temperature and humidity measuring instruments
• Temperature Sensor
• Sensors

Sensylink provides a rich product portfolio of level conversion, I/O expansion, analog switches, sensors, and more related to ADAS, domain control, and posture sensing to automotive manufacturers. Based on "hardware + algorithms," it offers a one-stop platform that is deeply integrated with on-site solutions. Sensylink's automotive products are AEC-Q100 certified, with some models integrating high-voltage MOSFETs, making customer design and application even easier. They also feature high reliability and excellent performance. The "CT75" is a digital temperature sensor with an accuracy of ±0.5°C. Temperature data can be read directly via a digital interface (SMBus, I2C, or 2-wire compatible) through an MCU, Bluetooth chip, or SoC chip. It is primarily used in intelligent HVAC systems and thermal management systems.

• Sensors
• Temperature Sensor
• Other semiconductors

Silicon Device Corporation has started handling products from Sensylink. The CHT8555 chip, a new generation of compact, high-precision, low-power digital temperature and humidity sensors released by Sensylink, can accurately measure and collect the temperature and humidity of the environment and skin surroundings through portable wearable devices, offering various functionalities. It provides high-quality solutions in applications that develop features for next-generation smart wearable devices.

• Thermo-hygrometer
• Sensors
• Temperature Sensor

The e-CAM130_CUXVR is a multi-camera solution for the NVIDIA Jetson AGX Xavier development kit, equipped with up to four 13 MP 4-lane MIPI CSI-2 camera boards. Each camera is based on the e-CAM137_CUMI1335_MOD camera module from ON Semiconductor, featuring a 1/3.2-inch AR1335 color CMOS image sensor and an integrated high-performance image signal processor (ISP). All four cameras are connected to the baseboard using 30 cm coaxial cables. These four 4-lane MIPI camera modules can stream in sync at 4K resolution, making it ideal for high-end multi-camera solutions. Customers can choose to purchase anywhere from one to four cameras according to their requirements.

• Color camera
• High Speed Camera

The CH7211 from the American company Chrontel is an IC that converts USB Type-C signals to HDMI. - Compliant with DisplayPort Alternate Mode on USB Type-C standard - Compliant with DisplayPort Specification version 1.3 and Embedded DisplayPort (eDP) Specification version 1.4 - Supports up to 4 Main Link Lanes at 1.62Gbps, 2.7Gbps (HBR), or 5.4Gbps (HBR2) link rate - Automotive DP input signal detection and Lane swap supported for compliance with the USB Type-C cable plug orientation switch - DP_BR signaling modes supported

• Dedicated IC
• Image Transmission Equipment
• Image Input Board

The CH7210 from Chrontel, Inc. in the United States is an IC that converts DisplayPort signals to HDMI. It complies with the DP1.3/eDP1.4 specifications and is used in various applications. • Compliant with DisplayPort Alternate Mode on USB Type C standard • Compliant with DisplayPort Specification version 1.3 and Embedded DisplayPort (eDP) Specification version 1.4 • Supports 2 Main Link Lanes at 1.62Gbps, 2.7Gbps (HBR) or 5.4Gbps (HBR2) link rate • USB Power Delivery control module supported with HPD to PD converter integrated

• Dedicated IC
• Image Transmission Equipment
• Image Input Board

The CH7511B from Chrontel, USA, is an IC that converts DisplayPort signals to LVDS. It complies with the DP1.2 specification and supports resolutions up to 1920x1200, making it suitable for various applications.

• Dedicated IC
• Image Transmission Equipment
• Image Input Board

The "e-CAM30_HEXCUTX2 (HexCamera)" is a multi-board camera solution for the NVIDIA Jetson TX1 / TX2 development kit, consisting of six 3.4 MP 2 Lane MIPI CSI-2 camera boards and an adapter board (e-CAMHEX_TX2ADAP) that interfaces with the J22 connector. Each camera is based on an ON Semiconductor 1/3 inch AR0330 color CMOS image sensor and an onboard image signal processor (ISP). All six cameras are connected to the e-CAMHEX_TX2ADAP adapter board using 30 cm micro coaxial cables.

• Color camera
• High Speed Camera

The "See3CAM_10CUG" is a USB 3.0 global shutter camera module compatible with 1.3M. It is a UVC-compliant SuperSpeed USB 3.0 camera based on the Aptina / ON Semiconductor AR0134 CMOS sensor, supporting S / CS / C mounts. It is also backward compatible with USB 2.0 and does not require special camera drivers. When connected to a USB 3.0 port, it can support resolutions of 720p @ 60fps (HD) and 1280x960 @ 45fps. Its compact and portable design makes it suitable for a wide range of applications, including surveillance and industrial endoscopes.

• Color camera
• Monochrome camera

The "See3CAM_130" is a 13MP autofocus USB 3.0 camera based on the iHDR-compatible UVC-compliant AR1335 sensor. It supports 4K Ultra HD (3840x2160) at 30fps via USB 3.0 in MJPEG compression format. The "See3CAM_130" can stream Full HD (1920x1080) at 60fps and HD (1280x720) at 60fps in both uncompressed and compressed MJPEG formats. It is also backward compatible with USB 2.0, but with lower frame rates and resolutions supported on USB 2.0. This 13MP 4K USB camera features a high-performance image processing processor (ISP) that provides top-level image/video quality and MJPEG compression, along with automatic functions such as automatic white balance (AWB) and automatic exposure correction (AE).

• Color camera

The "See3CAM_CU30" is a UVC-compliant 3.4MP low-light USB 3.0 camera board based on the AR0330 sensor from ON Semiconductor. This Low Light USB camera is backward compatible with USB 2.0 and supports MJPEG compression at frame rates equivalent to USB 3.0. The AR0330 sensor supports 3.4MP (2304x1536) at 60fps via USB 3.0 in MJPEG compressed format. The "See3CAM_CU30" can also stream in both uncompressed and compressed MJPEG formats at Full HD (1920x1080) at 60fps and HD (1280x720) at 60fps. This sensor exhibits excellent low-light performance and is capable of delivering high-quality images. The "See3CAM_CU30" is equipped with a high-performance image processing processor chip (ISP) that enables automatic functions such as automatic white balance (AWB) and automatic exposure correction (AE), in addition to providing top-level image/video and MJPEG compression through its ISP pipeline.

• Color camera

The "See3CAM_CU40" is a high-performance 4MP USB 3.0 UVC camera equipped with an S-mount (M12 mount) lens holder. This product is based on the Omnivision OV4682 CMOS image sensor, which supports the common RGB-IR format, and consists of two boards: the camera sensor board "e-CAM40_CUMI4682_MOD" and the USB 3.0 UVC controller board. It supports high frame rates via a 4-lane MIPI CSI-2 interface, and when connected to a host PC via USB 3.0, the "See3CAM_CU40" can stream at 672x380 @ 300fps, HD @ 90fps (720p90), and FHD @ 40fps (1080p40) in 10-bit RAW data format. Similarly, it can stream uncompressed 2688x1520/14fps in 10-bit RAW data format. It is a UVC-compliant USB 3.0 Super Speed camera, compatible with USB 2.0 host ports, and does not require the installation of special camera drivers on the host PC.

• Color camera
• Monochrome camera
• High Speed Camera

The 'See3CAM_CU50' from e-con Systems is a high-performance 5-megapixel USB 3.0 camera based on the Omnivision OV5640 CMOS image sensor, featuring an S-mount (M12) lens holder. This camera, compliant with UVC, does not require the installation of special camera drivers on the host PC. It is also backward compatible with USB 2.0 host ports. The M12 USB camera is ideal for applications that require flexibility in lens selection.

• Color camera
• Monochrome camera
• High Speed Camera

The "See3CAM_CU51" is a 5-megapixel UVC-compliant USB monochrome camera. This ultra-fast USB board camera features a camera module equipped with an Aptina/ON Semiconductor MT9P031 CMOS image sensor and an M12 lens holder. This monochrome USB camera is UVC-compliant, meaning there is no need to install special camera drivers on the host PC. The UVC drivers for Windows and Linux OS are compatible with this camera, and it is also backward compatible with USB 2.0 host ports. The M12 USB camera is ideal for applications that require flexibility in lens selection. The "See3CAM_CU51" is also compatible with USB Video Class (UVC) version 1.0, and all necessary firmware is built-in. Therefore, customers can immediately integrate this camera into their products, significantly reducing time to market.

• Monochrome camera

The "See3CAM_CU130" is a USB camera board that supports UVC-compliant 4K resolution. Based on the ON Semiconductor AR1820HS sensor, this 4K board camera supports Ultra HD quality (3840x2160) at 30fps via USB 3.0 in MJPEG compression format. It can also stream Full HD (1920x1080) at 30fps and HD (1280x720) at 60fps in both uncompressed and compressed MJPEG formats. Additionally, it is backward compatible with USB 2.0, but streaming over USB 2.0 will result in lower resolution and frame rates. This 13MP 4K USB camera features a high-performance image processing processor (ISP) that provides top-level image/video quality and MJPEG compression, along with automatic functions such as automatic white balance (AWB) and automatic exposure correction (AE).

• Color camera

"Tara" is a UVC-compliant 3D stereo camera based on the MT9V024 stereo image sensor from ON Semiconductor, supporting uncompressed WVGA (2 * 752) x 480 at 60fps via USB 3.0. This stereo camera provides two synchronized sensors in alternating frames alongside the host machine through the USB 3.0 interface. "Tara" can be used for algorithm development for stereo cameras and for integration into proprietary product designs. e-con Systems' 3D stereo camera can be applied to a wide range of applications including depth detection, disparity mapping, point clouds, machine vision, drones, 3D video recording, and surgical robots.

• Color camera
• Monochrome camera

【Main Products】 <USB 3.0 Cameras> ・13 MP Autofocus 4k Camera ・13.0 MP UltraHD Camera <Computer on Modules> ・Tegra K1 Computer on Module ・i.MX6 Computer on Module <Camera Modules> ・13 MP AR1820HS MIPI Camera Module ・5.0 MP OV5640 MIPI Camera Module <Camera Boards> ・13.0 MP AR1820 MIPI - Jetson TK1 ・4.0 MP OV4682 MIPI - Jetson TK1 ・3.4 MP AR0330 MIPI - Jetson TK1 We also have a wide range of other products available. https://www.e-consystems.com/

• Color camera