早坂理工 Product Lineup

The "HR-5513" is a manual rebound elasticity testing machine according to JISK6400-3 5.2. It is designed specifically for measuring the rebound elasticity of soft foam materials (samples). Additionally, it has a mechanism to hold a steel ball specified in JIS B 1501 with a nominal diameter of 16mm and grade G40 (diameter 16±0.5mm, mass 16.8±1.5g) and allows the steel ball to drop without rotation onto the center of the test piece. 【Features】 ■ A vertical transparent tube with an inner diameter of 50mm ■ A measurement section for rebound height of 500mm ■ Graduations every 5% (25mm) around the entire circumference ■ Graduations every 1% over one-third of the entire circumference *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "HR-5010" is a handle strength testing machine (sandbag) for pots and frying pans, and kettles, according to JIS S2010:1997 Branch numbers: 7.6.1, 7.6.2. It is capable of applying a force equivalent to the mass of water that is twice the full capacity. Additionally, it is compatible with both two-hand pots and one-hand pots, as well as kettle handles. 【Features】 ■ Can test two-hand pots up to 39 cm, the largest size according to JIS standards ■ Compatible with handles of two-hand pots, one-hand pots, and kettles *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "HR-5011" is a handle strength testing machine (tensile) for pots and frying pans, and kettles, according to JIS S2010:1997 branch numbers: 7.5.1 and 7.5.2. It can pull with a maximum force of 200N and can maintain the set force for one minute. It is compatible with both two-hand pots and one-hand pots, as well as kettle handles. 【Features】 ■ Capable of testing two-hand pots up to the maximum JIS standard of 39cm ■ Compatible with handles of two-hand pots, one-hand pots, and kettles *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TS-2019" is a testing machine used to measure the thermal insulation performance of fabric materials using artificial solar lighting. The light source is an artificial solar lighting lamp, and it can perform two types of tests with a single unit. Additionally, by changing some of the components on the same frame, it evaluates the surface temperature of the fabric after the light has been converted into heat (light absorption and heat generation). 【Features】 - The light source is an artificial solar lighting lamp. - It can perform two types of tests with one unit (by changing some components). - Includes thermography (refer to JISR1803). *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The HR-5902 is a testing machine for the JIS K 6400-4:2004 branch number: 6.1.1 repeated compression residual strain test method A (constant load method). It is a product specifically designed to measure the repeated compression residual strain of soft foam materials (urethane foam). Calibration documents for the pressure applicator and load cell are included. Please feel free to contact us when you need assistance. 【Features】 ■ Variable repeated compression load (140N to 1000N) ■ Repeated compression speed of 70 times/minute (adjustable from 30 to 99 times/minute) *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The HR-6117 is an impact testing machine for JIS T8101:2006 branch number: 9.1 a) impact testing machine and 9.8 a) toe protector impact testing machine. It can freely drop a steel striker with a mass of 20kg ± 0.2kg from a specified height along a vertical guide. Please feel free to contact us if you have any requests. 【Features】 ■ Comes with two types of steel strikers and a clamp fixture (fixed fixture) ■ Strikers and clamp fixtures are interchangeable *For more details, please download the PDF or feel free to contact us.

• Impact Test

The "HR-5512" is a mattress durability testing machine according to JIS S1102:2004 branch number: 8.1.1. It is a product designed to verify the durability "sag amount" of spring mattresses used for sleeping in ordinary residential beds. A program is also available to calculate the test data and display the results (8.1.2 deflection amount). Please feel free to contact us when you need assistance. 【Features】 ■ Can be installed up to double size (abbreviation 14) (1400W x 1950L) ■ Dedicated to spring mattresses *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Attractant Bloodsucking Device" used for mosquito repellent tests. This product consists of a test cage, test holder, inclined platform, and feeding device, and the test cage can supply carbon dioxide. While tests using humans or animals as blood sources have been mainstream, this is a groundbreaking device that does not use living organisms as blood sources. 【Features】 ■ Composed of a test cage, test holder, inclined platform, and feeding device ■ Developed with technical cooperation from the Kaken Test Center ■ Standard number JISL1950-1:2018 Sub-number: 5.1 to 5.1.5 *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Thermal Insulation Testing Device" handled by Hayasaka Riko Co., Ltd. This product is a testing machine used to measure the thermal insulation performance of textile fabrics using artificial solar lighting. By changing some components on the same frame, it is also possible to evaluate the surface temperature of the fabric after light is converted into heat (light absorption heat generation). 【Product Details】 ■ Device: AC100V operation ■ Includes thermal radiation receivers (12 each) and specimen holders (12) ■ Includes camera stand and thermography ■ Options: Testing environment, PC rack, etc. ■ Standard numbers: JISL1951:2019 Branch number: 6-6.3 Thermal insulation JISL1926:2019 Branch number: 5-5.2 Light absorption heat generation *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the 'Quick-Drying Test Device (A1 Method)' handled by Hayasaka Riko Co., Ltd. This product is a system that measures quick-drying using two electronic balances. It records the weight changes of test pieces suspended on a hanger with water droplets applied. By collecting balance data with dedicated software, it automatically calculates drying time and drying speed. 【Features】 ■ Records weight changes of test pieces suspended on a hanger with water droplets applied ■ Developed with technical cooperation from the Kaken Test Center ■ Standard number: ISO17617:2014, Sub-number: 6.4 *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Moisture Absorption Heat Generation Measurement Device" handled by Hayasaka Riko Co., Ltd. This product is a testing machine used to record the surface temperature changes of moisture-absorbing heat-generating materials. It has a flow path that can switch between Dry (dry air) and Wet (humid air: bubbling), and is equipped with a flow meter that can adjust the flow rate. Additionally, it automatically records temperature changes under test conditions (Wet) to a data logger. 【Features】 ■ Equipped with a flow path that can switch between Dry (dry air) and Wet (humid air: bubbling) ■ Equipped with a flow meter that can adjust the flow rate ■ Capable of automatically recording temperature changes under test conditions (Wet) to a data logger ■ Standard number ISO18782:2015 Sub-item: 6.2 JISL1952-1 Sub-item: 6.2 *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This product is a repeated compression testing machine for measuring the residual strain of soft foam materials (urethane foam) under repeated compression. It is capable of testing four specimens simultaneously. The specimen size can range from 50mm to 100mm in width and length, and from 20mm to 200mm in thickness. Please note that primary power supply installation is not included. 【Features】 ■ Measures the residual strain of soft foam materials (urethane foam) under repeated compression ■ Can test four specimens simultaneously ■ Compliance standard: JISK6400-4:2004, branch number: 6.2, Method B (constant displacement method) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is a repeated compression testing device for measuring the residual strain of soft foam materials (urethane foam). The specimen size can be up to 400mm square. The standard thickness is 50mm ± 2mm (up to a maximum of 100mm). It is equipped with an air cylinder, and the repeated compression load ranges from 140N to 1000N. 【Specifications (partial)】 ■Applicable standard: JIS K6400-4:2004, Subsection: 6.1, Method A (Constant Load Method) ■Number of specimens: 1 ■Repeated compression speed: 70 times/min (adjustable between 30 to 99 times/min) ■Repeated compression load: 140N to 1000N ■Number of tests: 80,000 times (number can be changed) ■Stroke: To be discussed *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is an impact testing machine that can freely drop a steel striker with a mass of 20±0.2 kg from a specified height along a vertical guide to impart a specified impact energy to safety shoes. By replacing the striker, it is also possible to conduct impact tests on toe protectors. Additionally, two types of shoe fixation parts are included. 【Features】 ■ Can impart specified impact energy to safety shoes ■ Allows free fall of a steel striker from a specified height along a vertical guide ■ Equipped with a manual winch ■ Drop mechanism: AC100V drive ■ Includes shoe fixation parts (2 types) ■ Compliance standard: JIST8101:2006, branch numbers: 9.1, 9.8 *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is an automatic measurement testing machine used to determine the rebound elasticity of 3.2 soft foam materials (samples). It is an automatic measurement type according to JISK6400-3:2011, branch number: 5.2. The testing machine body and control box are separate, and the measurement error compared to the manual measurement type is ±1% (±5mm). 【Features】 ■Applicable standard: JISK6400-3:2011, branch number: 5.3 ■Dedicated to 3.2 soft foam materials (samples) ■Used to determine rebound elasticity ■Measurement error compared to the manual measurement type is ±1% (±5mm) ■A scale is provided to confirm measurement error *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is a testing machine used to confirm the durability "sag amount" of spring mattresses used for residential regular beds. The applied load value is 1000N (Max: 1500N). The speed is 160 cycles ±10 cycles/min, and it can be arbitrarily changed from 60 cycles/min to 160 cycles/min. The testing machine is driven by three-phase 200V, and the measurement section is powered by AC100V. Please note that the primary side power supply work is not included. 【Specifications】 ■ Standard Number: JISS1102:2004 Branch Number: 8.1.1 ■ Test Subject: Spring Mattress ■ Applied Load Value: 1000N (Max: 1500N) ■ Stroke: 50mm to approximately 250mm ■ Speed: 160 cycles ±10 cycles/min (can be arbitrarily changed from 60 cycles/min to 160 cycles/min) - However, for settings between 60 cycles/min and 150 cycles/min, if the mattress's reaction force and stroke amount differ, time measurement and adjustment are necessary. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is a testing machine used to confirm the wear resistance of fluororesin coatings. After rotating the turner at a speed of 40 times per minute for 3000 revolutions, the condition of the coating surface is visually observed to check for the presence or absence of exposed aluminum substrate. The temperature of the sample (work) coating surface is 200°C ± 5°C. The dimensions of the turner are 70mm in width and 1.0mm in thickness, with a mounting angle of 40° to the coated surface. 【Specifications】 ■ Applicable Standard: JISS2010:2013 Branch Number: 8.3.4.5 ■ Sample (work) coating surface temperature: 200°C ± 5°C ■ Turner dimensions: 70mm in width, 1.0mm in thickness ■ Turner material: SUS304 ■ Turner mounting angle: 40° to the coated surface ■ Weight: 2.8N ± 0.2N (280g ± 20g) ■ Turner movement speed: 40 times/min *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is a testing machine specifically designed for thermoplastic three-dimensional mesh fiber structures. It measures the rebound elasticity (%) of the mesh fibers and confirms the classification (H, M, L). The drop height adjustment is operated manually with a handle, and the drop mechanism uses an electromagnetic release device. It comes with recording equipment and a tripod. 【Specifications】 ■ Standard number: JISL4500:2020, Branch number: 9.5.4 ■ Drop weight: Cylinder with a diameter of 80mm ± 1mm ■ Drop height adjustment: Manual handle operation ■ Drop mechanism: Electromagnetic release device *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is a device for testing the pull strength of handles on both two-handled pots, one-handled pots, and kettles. It can apply a force equivalent to the mass of water that is double the full capacity, and it can test up to a maximum of 39 cm according to JIS standards for two-handled pots. It can repeat the application of force 10,000 times at a speed of 40 to 50 times per minute. 【Features】 ■Applicable standard: JISS2010:1997 Branch number: 7.6.1 ■Can apply a force equivalent to the mass of water that is double the full capacity ■Can test up to a maximum of 39 cm according to JIS standards for two-handled pots ■Can repeat the application of force 10,000 times at a speed of 40 to 50 times per minute ■Testing machine: AC100V powered *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The HR-5509 is a testing machine for JIS K6400-4:2004 Branch number: 6.2.1 Repeated Compression Residual Strain Test Method B (Constant Displacement Method). The stroke adjustment range is 10mm to 100mm, and the specimen size is 50mm to 100mm in width and length. The number of tests is 80,000, and settings can be changed. Please feel free to contact us if you have any requests. 【Features】 ■ Repeated compression speed: 60 times/minute ■ Specimens of width and length: 50mm to 100mm can be installed (Up to 4 specimens of 100mm size can be installed) ■ Stroke adjustment range: 10mm to 100mm * For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "TS-2020" is an automatic rebound elasticity testing machine according to JIS K 6400-3 5.3. It is a testing machine specifically designed to measure the rebound elasticity of soft foam materials (samples), equipped with an electronic device for computational processing. Additionally, it has a mechanism to hold a steel ball specified in JIS B 1501 with a nominal diameter of 16mm and grade G40 (diameter 16±0.5mm, mass 16.8±1.5g), allowing the steel ball to be dropped without rotation at the center of the test specimen. 【Features】 ■ Automatically calculates rebound elasticity (%) ■ Displays results from three measurements ■ The main body and control box are separate, making it easy to transport *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "HR-6103" is an inclined test device according to JIS F 8076:2005 Branch Number: 5 Table 1/11a, 11b. This product is designed to confirm that marine electrical equipment and systems can be used under the influence of inclination without unintended switch operation or functional degradation. It features a function for confirming the set angle, and allows for the setting of the number of tests and speed. Please feel free to contact us when you need assistance. 【Features】 ■ Capable of carrying up to 100kg (1M×1M×1M) ■ Two angle selections (±22.5° and ±30°) ■ Operates with a cycle of approximately 10 seconds *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "HR-5124" is a sprinkler test device that complies with JIS C 0920:200J3 branch number: 14.2.4 (IPx4) and 14.2.6 (IPx6). This product is designed to verify the performance of protection against water (IP code) and allows for the adjustment of the amount of water and water pressure. The range of sprinkler height is 1000 to 4000 mm, and the size of the test specimen that can be installed is approximately 1000 mm to 3000 mm in height. 【Features】 ■ Capable of testing IPx4 (water splashing) and IPx6 (jet spray) *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "Wilson All-in-One VH3100" is an industry-leading full automation model. Equipped with a bright field overview camera featuring a 13×13mm FOV, it meets the stringent demands of hardness testing machines used in production management. Please feel free to contact us if you have any inquiries. 【Features】 ■ Industry-leading full automation model ■ Meets the stringent demands of hardness testing machines used in production management ■ Equipped with various functions of DiaMet ■ Designed for easy operation ■ 125mm vertical function model *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Isomet LS (Low Speed)" is a precision cutting machine with a cutting capacity of 32mm in diameter. The power supply is 115VAC, 50/60Hz, 160W, with a speed range of 0 to 300rpm and stepless variable speed. Please feel free to contact us when you need assistance. 【Standard Accessories】 ■ Flange 64mm in diameter, aluminum ■ Weight set ■ Small chuck for long materials ■ Cantilever chuck ■ Chuck for irregular samples ■ Chuck for wafers ■ Diamond cutting wheel *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "Isomet High Speed / High Speed Pro" is a precision cutting machine that can fix samples in just a few seconds thanks to its rapid rail and tool-less vice system. With a powerful 2kW blade motor output, it minimizes distortion on the sample surface while reducing cutting time. Please feel free to consult us when needed. 【Features】 ■ Quick sample fixation ■ Rapid positioning ■ Efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "Ecomet 30" is an automatic grinding machine with dimensions W488×D638×H650mm, designed to simplify everyday grinding tasks. Its straight drainage system minimizes the accumulation of grinding debris, saving cleaning time. The grinding wheel can be easily removed for cleaning, helping to prevent contamination. Additionally, the durable die-cast body provides robustness and stability. 【Features】 ■ Simplifies everyday grinding tasks ■ Easy to clean ■ Excellent design ■ Can be linked with burst (up to 3 units) ■ Stores 5 different parameters *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "Automat 250" is an automatic polishing machine with a head output of 0.156Hp (116W). Its dimensions are W508 × D620 × H699mm, and the control panel (membrane) features an LED display (3-digit display). Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Power supply: 100-240VAC, 50/60Hz single phase, 200V recommended ■ Polishing wheel motor output: 1Hp (750W) ■ Polishing wheel dimensions: 8 inches (203mm), 10 inches (254mm) ■ Polishing wheel rotation speed: 10-500rpm adjustable in 10rpm increments with up/down keys ■ Polishing rotation direction: clockwise/counterclockwise *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "Simple Met 4000" is a heating and pressurizing automatic embedding machine with dimensions W311×D662×H498mm (524mm when the door is open). The noise level reaches a maximum of 62db at a distance of 1 meter from the front of the machine during the up and down movement of the ram associated with the opening of the mold closure. Please feel free to contact us if you have any inquiries. 【Features】 ■ Increased productivity (high durability) ■ Time reduction (short embedding cycle) ■ Space-saving (can accommodate two units in a narrow space) ■ Comes with mold assembly *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Wilson Hardness Reference Plates" have a comprehensive range of scales and types of hardness reference plates, making them suitable for a wide range of hardness scales related to Rockwell, Brinell, Knoop, and Vickers tests. They are made from the highest quality materials to ensure that industry standards are set, and that highly invariant and reproducible hardness reference plates can be obtained. The testing machines used in the calibration process are subjected to a rigorous monitoring process using NIST-traceable equipment. 【Features】 ■ Direct collaboration with steel mills to identify chemical composition ■ All machining (grinding, lapping, polishing) is performed in-house at calibration facilities ■ 100% inspection to ensure various hardness reference plates meet ASTM physical requirements (thickness, flatness, parallelism, surface roughness) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Vanta Core/Max" is a fluorescent X-ray analyzer that improves the weight balance of the device body by adopting a new type of battery in addition to its modern design. Furthermore, it features a new rubber grip that is small, non-slip, and elastic, based on ergonomic principles. The weight balance of the device and the fit of the grip reduce fatigue during use. 【Evolution Points (Excerpt)】 ■ Comfortable click feel ■ Non-slip and elastic rubber used ■ Low center of gravity achieved with new battery ■ Highly visible radiation warning LED ■ Large ventilation openings for efficient cooling *For more details, please download the PDF or feel free to contact us.

• X-ray fluorescence analyzer

The "39DL PLUS" is an industrial ultrasonic thickness gauge equipped with speed, connectivity, and reliability. It functions as a precision thickness gauge for demanding applications or as a thickness gauge for corrosion inspection. This handheld thickness gauge, featuring high ultrasonic performance, a fast scanning speed of up to 60Hz, and a fully integrated wireless connection, provides reliable measurement results with a seamless workflow. 【Features】 ■ Affordable test specimen scanning ■ Versatile applications with a single thickness gauge ■ Tough design that is resistant to breakage in various environments ■ Easy to carry and simple to operate *For more details, please download the PDF or feel free to contact us.

• Coating thickness gauge

The "iPLEX TXII" is an industrial videoscope that improves the wear resistance and strength of the insertion part through the adoption of a metal blade and a review of its internal structure. It is available in two models: a flexible scope (Φ2.2mm) that emphasizes flexibility, and a rigid scope (Φ1.8mm) that prioritizes slimness. It is utilized in various industries, including the automotive sector, and is suitable for inspecting narrow and intricate areas. 【Three Evolved Performances】 ■ High Image Quality: For clearer and more vivid observation images ■ Durability: Stronger for harsher inspections ■ Insertability: To reach inspection areas even more easily *For more details, please download the PDF or feel free to contact us.

• Other microscopes

The "DT-205 Series" is a lightweight drop testing machine that achieves high-precision drop tests by allowing the test sample to free fall in the set posture until just before impact, using a fixed drop method for the test samples. The drop height can be easily set using the scale markings. It features a safety design that prevents the release and drop of the test sample during a power outage. Additionally, we offer a high-durability model, the "DT-205M Series," which supports high-cycle drop tests while maintaining the same usability as the original product. This model uses a motor for the lifting operation of the test sample indicator. 【Features】 ■ High-precision drop model ■ Capable of testing samples weighing up to 5 kg ■ Fixing and releasing of the test sample is performed using a pneumatic cylinder ■ Drop height can be easily set using the scale markings ■ Safety design prevents the release and drop of the test sample during a power outage ■ Operated via a remote controller Applicable standards: JIS C 60068-2-31, IEC 60068-2-31 *For more details, please download the PDF or feel free to contact us.

• Impact Test

The "DTS Series" is a packaging cargo drop testing machine that employs an air-driven cylinder and a spring-based drop mechanism. First, the test specimen table is rapidly dropped vertically using the air cylinder, and then the strong tension of the spring is converted into rotational motion, allowing the specimen to fall freely. This method significantly improves the drop posture of the specimen. Additionally, the test position of the specimen table set by the air cylinder enables high-speed test cycles. 【Features】 ■ High precision drop posture: Minimum drop height of 200mm (drop height of 100mm possible with optional fixtures) ■ Maximum drop height of 1.8m (DTS-80/120) ■ Maximum cargo size of 100×80×90cm (DTS-120) ■ Improved test cycle (compared to our previous models) Applicable standards: JIS Z 0202, JIS C 60068-2-31 *For more details, please download the PDF or feel free to contact us.

• Impact Test

The "G-TAG ShockView" is a compact recorder that quantifies the impact experienced by packages during logistics and can specify the date and time of the incident. All operations, from various settings to automatic report generation, can be easily performed using only a smartphone. With Bluetooth communication capabilities, for example, this product placed inside a cardboard box can be operated and data can be retrieved from the outside. 【Main Features】 ■ A transport environment logger that combines "compact," "lightweight," "affordable," and "high-performance" ■ Long-term recording of "peak acceleration" occurring in products and cargo without any omissions ■ Easy operation using mobile devices ■ Measurement and data display possible in the packaged state *For more details, please download the PDF or feel free to contact us.

• Data Logger

"TrecView" is a compact logger specialized in recording vibrations and temperature/humidity during cargo transport, requiring no PC. The logger can be operated from mobile devices such as smartphones and tablets, allowing for the creation of measurement reports and email sending all wirelessly within a dedicated app. It is suitable for vibration measurement in managing the vibrations of transported goods, comparing vibrations of transport routes and vehicles, and transmitting vibrations to test samples during vibration testing. 【Lineup】 ■FIR-302D: A model specialized for vibration measurement in heavy electrical transport. ■FIR-302W: A general-purpose model suitable for vibration measurement of common product transport, including precision instruments, automobiles, home appliances, and medical devices. *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "spot cooling and heating device" is a chamberless system that injects air with a temperature range of -40 to +180°C to cool or heat samples. By changing attachments, it can be easily set up with various material testing machines, making it possible to reproduce constant temperature environments that were previously difficult to achieve in material testing. Additionally, it adopts a one-way supply method for constant temperature air, achieving a rapid temperature change rate of 10°C per minute. 【Features】 ■ Flexible ■ Improved testing efficiency ■ Quick temperature changes ■ Space-saving and easy to move *For more details, please download the PDF or feel free to contact us.

• Other heating and cooling equipment

The "One Device Chamber" is a tabletop windless constant temperature bath designed for thermal management, with a temperature range of -30 to +130°C. It features a large observation window on the top, making it easy to observe samples under temperature conditions. Additionally, the wiring for samples and measuring instruments is easy to manage, and it can be used with standard AC100V, allowing for convenient temperature characteristic evaluations and thermal analyses, such as shape changes, while working on design tasks at an office or laboratory desk. Furthermore, it comes standard with dry air piping into the observation window to prevent fogging of the glass during low-temperature tests. 【Features】 ■ Easy observation of samples under temperature conditions ■ Improved testing efficiency and uniformity within the chamber in a windless state ■ Enhanced measurement quality due to low vibration and shortened wiring ■ Measures to prevent condensation *For more details, please download the PDF or feel free to contact us.

• Thermostatic chamber

The "AE Analyzer" is a system that combines measuring instruments and measurement/analysis software to analyze AE signals. We offer two types of application software to analyze "continuous AE signals" generated by friction and wear, and "impulsive AE signals" caused by cracks and damage. The AE signals from the sensors are amplified and filtered before being transferred to a PC, allowing for real-time waveform display, STFT (Short-Time Fourier Transform) display, feature extraction, and localization. 【Features of Impulsive AE Application Software】 ■ Control of measuring instruments and signal recording ■ Extraction of impulsive AE waveforms ■ Real-time display of features ■ Localization ■ Waveform viewer ■ Re-analysis of saved data *For more details, please download the PDF or feel free to contact us.

• Logic Analyzer

The "WF1981/1982" is a multifunction generator with a sine wave output of 0 to 30 MHz and square wave and pulse wave outputs of 0 to 15 MHz. The maximum output voltage is 21 Vp-p/open circuit, and the DC offset voltage is ±10.5 V, with a 0 Vp-p setting also possible. Even if the output is divided due to low load impedance, appropriate voltage application at the load terminal can be expected. Additionally, we also offer the "WF1983/1984," which has a sine wave output of 0 to 60 MHz and square wave and pulse wave outputs of 0 to 30 MHz. 【Common Features】 ■ 0 to 30 MHz / 0 to 60 MHz resolution of 0.01 μHz ■ 1 channel / 2 channels ■ 16-bit, 21 Vp-p/open circuit ■ Low distortion, low jitter ■ Sub output *For more details, please download the PDF or feel free to contact us.

• Other physicochemical equipment

The "RX47022" is a voltage 2-phase, current 2-phase protection relay tester that supports various digital relay tests. It reduces the need for multiple dedicated testers for different relays, which previously required transportation and wiring, and is equipped with auxiliary power output, allowing it to drive the protection relays being tested. Additionally, all wiring and operation of the tester can be performed on the operation panel. 【Features】 ■ Lightweight and compact, easy to transport and install ■ Condenses a wealth of testing functions into one unit ■ Easy to set up tests and collect test results ■ Terminal and operation controls are integrated on the operation panel *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

"DER-PRO" is a compact data logger that measures 3-axis acceleration and temperature and humidity during transportation. The large-capacity data recorded on the SD card can be analyzed using dedicated PC software, allowing for various analyses such as PSD, histograms, transportation diagnostics, and PSD synthesis. It is suitable for applications such as creating vibration test conditions, verifying the effectiveness of packaging design changes, and logistics traceability. 【Features】 ■ Two built-in acceleration sensors tailored for different applications (±16G for vibration measurement, ±200G for shock measurement) ■ Large-capacity data recorded on SD card ■ Comes with dedicated data analysis software *For more details, please download the PDF or feel free to contact us.

• Data Logger

The "ICM-2" is an imaging measurement device that measures the clarity of images reflected on the surfaces of objects, such as painted surfaces, and the sharpness of images that can be viewed through transparent films and plastics. It supports three conditions for transmission and reflection measurements (45°, 60°) with a single unit. The position and angle of the sample stage and the light receiver can be switched easily and accurately. Additionally, it can be operated and display measurement results using dedicated software for computers (compatible with Windows 11). 【Features】 ■ Significantly reduces measurement time (PAT.) ■ Compatible with both transmission and reflection ■ Long-lasting VI-LED light source ■ Operable from a computer *For more details, please download the PDF or feel free to contact us.

• Other electronic measuring instruments

The "HZ-V4" is a haze meter that measures the degree of haze (level of transparency) of materials such as glass, plastic, and liquids. The door of the sample chamber opens to a width of 90mm while retracting, allowing the position of the measurement hole to be visible in a natural posture. Additionally, the measurement light source turns on when the door is opened, making it easy to confirm the measurement position at a glance when setting the test specimen. (PAT.) Furthermore, with the automatic measurement function, it can automatically start measuring when it detects that the door has been closed. 【Features】 ■ Door opening designed with work efficiency in mind ■ Sample chamber that accommodates large samples ■ User-friendly and convenient operation screen ■ TM-type double beam method for long-term stability ■ Data transfer software included as standard *For more details, please download the PDF or feel free to contact us.

• Other electronic measuring instruments