コマック List of Products and Services

It is possible to fill two types of raw materials simultaneously with a single filling. The packaging can be done in a W-pack format that separates the materials within the bag to prevent mixing.

• Filling and packaging machine
• Powder Filling Machine

The body is designed to be extremely compact, achieving ease of maintenance as well. It is a filling and packaging machine specialized in cost performance, combining the advantages of mechanical systems with the simplicity of sequence control.

• Filling and packaging machine
• Liquid and beverage filling machines

The individual packaging of matcha powder has been difficult for a long time, and there are many users facing challenges, especially since there are no automatic filling machines for around "30g." Issues such as seal defects due to fine powder floating, jamming, and the properties that tend to clump or solidify lead to instability in weighing. Therefore, we will elevate our unique technology and present a new proposal. We will showcase this latest model at "JAPAN PACK" to be held in October 2025. Venue: Tokyo Big Sight Booth: 4-710, East Hall 4 JAPAN PACK website: https://www.japanpack.jp/

• Filling and packaging machine

Attention those struggling with liquid filling in stick packaging! We have developed a stick filling and packaging machine specifically designed to address liquid leakage issues and internal sealing. Many users may be facing problems with leaks originating from the fundamental bonding of the film in stick packaging. This filling and packaging machine reaches out to those specific concerns. Please feel free to contact us if you have any inquiries.

• Filling and packaging machine

The "Patchin Pack" is a system that mixes formulations filled in Room A and Room B by snapping the partition seal. It can be used for a variety of applications that require mixing just before use, including powders and solutions for cosmetic packs, roasted sesame and dressings, compressed wet towels and pure water, two-component curing adhesives, and oil-based and water-based liquids. The shape of the partition seal is available in straight and wave types, allowing selection based on packaging size and capacity. 【Lineup】 ■ Use by snapping the seal that separates the contents ■ Can mix two types of contents inside the bag ■ Compatible with "liquid and powder," "liquid and liquid," and "liquid and solid" ■ Compatible with liquid seals that leave no air ★ We will exhibit at "TOKYO PACK 2024," held from October 23 to 25, and plan to showcase samples of this system. 　(Venue: Tokyo Big Sight, East Hall, Booth Number: 5D-13) *For more details about this system, please refer to the materials. Feel free to contact us with any inquiries.

• Packaging Bags

We will be exhibiting at domestic trade shows from April to June. Various filling and packaging machines will be showcased! There will be demonstrations with actual machines. We welcome inquiries about filling/packaging machines and related lines at our booth. Please feel free to visit us. You can find details about each exhibition at the related link URLs. 2024 Chubu Pack Event Period: April 17 (Wednesday) - 20 (Saturday), 2024 https://chubupack.or.jp/ 34th West Japan Food Industry Creation Exhibition '24 Event Period: May 15 (Wednesday) - 17 (Friday), 2024 https://www.nikkanseibu-eve.com/food/ FOOMA JAPAN 2024 - One of the world's largest comprehensive food manufacturing exhibitions - Event Period: June 4 (Tuesday) - 7 (Friday), 2024 https://www.foomajapan.jp/

• Filling and bottling machines

The "KP-505" is an automatic powder filling packaging machine that employs a variable thermal roll. It features a shutter mechanism that reduces jamming. Additionally, it can accommodate both mass production and small lots of various products. The packaging format is three-side seal, with a packaging capacity of 20 to 200 bags per minute. The variable length range is divided into two, three, four, and six sections. 【Specifications (partial)】 ■ Filling material: Powder ■ Packaging format: Three-side seal ■ Packaging capacity: 20 to 200 bags per minute ■ Filling capacity: 0.5 to 50cc per bag *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging machines

We would like to introduce our automatic pressing control device. The pressing screws driven by a servo motor and pressure sensors are installed on both sides of the heat roll. To measure the actual pressure applied when sealing packaging, it becomes easier to manage sealing pressure and increases reproducibility. 【Features】 ■ Pressing screws and pressure sensors are installed on both sides of the heat roll ■ Feedback of the pressure at the moment the heat roll pinches the packaging ■ The gap of the heat roll is adjusted by a servo motor ■ Easier sealing pressure management with high reproducibility ■ Uniform adjustment on both sides of the heat roll is possible *For more details, please refer to the PDF document or feel free to contact us.

• Filling and bottling machines

We would like to introduce our product, 'S-PACK'. It is a packaging bag that allows you to extract the contents by pressing with your finger without cutting the bag. Please experience this new form of packaging. 【Features】 ■ Extract the contents by pressing with your finger without cutting the bag. *For more details, please refer to the PDF document or feel free to contact us.

• Packaging Bags

The "Wave Pass" is a continuous heating, cooling, and dewatering device that is one of the "Uniline low-temperature sterilization for small bags." Since it performs continuous processing while maintaining a strip shape, it does not damage the appearance of the product and consistently carries out the labor-intensive tasks of heating, cooling, and dewatering. Additionally, by connecting various accumulation devices in the subsequent processes, it significantly contributes to the labor-saving of the entire series of operations. 【Product Lineup (Partial)】 ■ Cooling Devices - S-C1: Tank capacity 200L - M-C1: Tank capacity 415L - L-C1: Tank capacity 730L - L-C2: Tank capacity 730L x 2 - L-C3: Tank capacity 730L x 3 *For more details, please refer to the PDF document or feel free to contact us.

• Filling and bottling machines

The "KP-505" is an automatic powder filling packaging machine that employs a variable thermal roll. It features a shutter mechanism to reduce jamming. Additionally, it can accommodate both mass production and small lots of various products. The packaging format is three-side seal, with a packaging capacity of 20 to 200 bags per minute. The length variable range is divided into two, three, four, and six sections. 【Specifications (partial)】 ■ Filling material: Powder ■ Packaging format: Three-side seal ■ Packaging capacity: 20 to 200 bags per minute ■ Filling capacity: 0.5 to 50cc per bag *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging machines

All-axis servo control manages the pitch, seal temperature, filling amount, and timing of each drive axis in bag-making, with file management allowing for the storage of over 300 product data entries. It features a fine-tuning function using a joystick. The area around the raw material is kept tidy, resulting in space-saving design.

• Filling and packaging machine
• Liquid and beverage filling machines

Slowing down the packaging speed leads to a wider range of packaging conditions. It is possible to slit the film on the machine and produce beautifully finished four-sided seals. This results in a neat finish for the product and an increase in productivity through multi-lining (packaging speed × number of lines).

• Filling and bottling machines

Equipped with a film automatic splicing device (splicer), this system adopts a method that allows for the discharge of defective sections before and after the splice without stopping the pump and while maintaining the same packaging speed.

• Filling and bottling machines

The new variable thermal roll mechanism allows for pitch adjustments. Furthermore, it achieves a finish that is comparable to that of a single roll. It is a dedicated machine for powders and granules. By utilizing the shutter chute of conventional machines, it also addresses the issue of material jamming. It minimizes the drop distance of the raw materials, enabling high-speed filling.

• Filling and bottling machines

The "TJ-60" is a compact and easy-to-operate bag filling and packaging machine. It addresses the needs of those who say, "I want to package small amounts into small bags, but a full-scale packaging machine is not cost-effective for such small quantities," "I want to outsource, but they won't accept such small amounts," or "I want a small packaging machine that can be used in a lab." This product is perfect for those who don't need a full-scale filling and packaging machine but want something simple and affordable. 【Features】 ■ The filling materials for packaging can be liquids or powders. ■ Just press the start button to produce up to 30 bags per minute. ■ The power supply is standard household single-phase 100V (15A). ■ A full-scale weighing device for liquids or powders can also be optionally installed. *For more details, please download the PDF or contact us.

• Other packaging machines
• Filling and packaging machine
• Tabletop filling machine

The inspection device "Comac Leak Tester Compact Type" is a seal leak testing equipment that uses an ejector for the vacuum method instead of a vacuum pump for the depressurization operation. It is compact, space-saving, and easy to use. The desiccator for placing products is available in two types: round (spherical) and rectangular (box-shaped), so please choose according to your needs. It can be used without a power supply. 【Features】 ■ Compact size ■ Two types of desiccators ■ Uses an ejector ■ No power supply required *For more details, please request materials or view the PDF data from the download.

• Defect Inspection Equipment

The inspection device "Comac Leak Tester LT46-A" is a seal leak testing equipment that employs a vacuum reduction method using an ejector, without the need for a vacuum pump. The ejector is a device that can create a vacuum directly from compressed air and can be used easily without a power supply. This product is an inspection device that confirms the presence and location of leaks, such as air leaks due to seal defects in three-way and four-way seals or pinhole leaks, through submersion testing. 【Features】 ■ No power supply required ■ Ejector used ■ No vacuum pump used For more details, please refer to the catalog or feel free to contact us.

• Defect Inspection Equipment

By adopting a complete liquid sealing method when filling and packaging liquid or viscous products, it is possible to prevent the intrusion of air into the packaged product.

• Filling and bottling machines

It is a packaging system that destroys the sealing barrier separating Room A and Room B, allowing the formulations filled in Rooms A and B to be mixed within the bag.

• Filling and bottling machines

We have minimized the height of the conventional vertical packaging machine, which was a drawback, and improved its operability. It is now also possible to equip it with Komatsu's original auger scale, increasing the variety of scales available.

• Filling and bottling machines

The roll film used is slit into specified columns on this machine, and while forming tubes for each column, it is filled and packaged in between songs. By adopting a servo motor for the main drive unit, we have simplified the adjustment of pitch changes and filling timing, and have also implemented a system for file management of a wide variety of filling and packaging data. By selecting the weighing method, it can accommodate a wide range of products.

• Filling and bottling machines

This machine is a multi-lane automatic filling and packaging machine for powders and granules that achieves high productivity. By adopting a single roll, it excels in the aesthetic quality of product sealing. Furthermore, thanks to our original photoelectric control, products with pattern alignment as well as those with endless patterns can be selected.

• Filling and bottling machines

In addition, it is equipped with pattern matching photoelectric control as standard. Furthermore, by simplifying the mechanism as much as possible, we are offering it as an affordable model.

• Filling and bottling machines

The measuring device can choose between the screw measuring method using an auger device and the mass measuring method using a turntable, allowing it to accommodate a wide range of filling materials and offering excellent maintainability.

• Filling and bottling machines

The measuring department offers both capacity measurement using a turntable method and screw measurement using an auger device, allowing for a wide range of filling materials. It also excels in maintainability.

• Filling and bottling machines

This machine is a model that can semi-automatically fill and package materials that are difficult to measure automatically, such as solid shapes and irregular items (like pickled ginger, etc.). It is designed so that you only need to manually push the items onto the upper turntable for filling and packaging. If you are struggling with filling and packaging irregular items or small solids, please feel free to consult us. *For more details, please download the PDF or feel free to contact us.

• Filling and bottling machines

This machine is designed to manually load filling materials that are difficult to automatically measure, such as solid shapes and amorphous items (like pickled ginger), onto the upper turntable, and it fills and packages them in a semi-automatic manner.

• Filling and bottling machines

It is a single thermal roll type, allowing for high-speed operation of three-side seal packaging. It is a model specifically designed for endless design.

• Filling and bottling machines

Due to being a single heat roll type, it allows for high-speed operation, and even in seal finishing, beautiful three-way seal bags can be obtained.

• Filling and bottling machines

It is equipped with standard operating mechanisms for bag-making conditions that vary according to the specifications of the products being produced, such as pattern matching photoelectric control, endless operation, pitch changes for bag-making, notch depth adjustment, fine-tuning of cut positions, and fine-tuning of cutting angles.

• Filling and bottling machines

Adoption of new mechanisms in all aspects from film setup to tension control, flow mechanism, bag-making mechanism, notch (cutting opening) mechanism, cutter mechanism, and discharge mechanism. ○ Adoption of fine adjustment function via joystick ○ Multi-row sealing in four directions is possible ○ Recommended model for cosmetic filling ○ Stainless steel housing adopted ○ Pressure control is performed with air, allowing for monitoring

• Filling and bottling machines

The installation position of the film raw material is set low, allowing for the hanging of long films, and it is designed to contribute to high productivity.

• Filling and bottling machines

Since it is a two-column system of a different series, it is possible to produce two types of fillers simultaneously. Additionally, because the drive systems are separate, even if one side fails, production can continue with the other side.

• Filling and bottling machines