サンコーテクノ Product Lineup

This product, the "Metal Undercut Anchor Smart Type," is designed to meet the needs of customers who want to use a metal expansion type anchor in high places within tunnels or in areas where a long drilling depth cannot be secured. Compared to conventional products, this product has a shorter embedment length and can be installed using a compact SDS-plus type hammer drill, allowing the anchor itself to expand (widen) while cutting into the hole wall, enabling quick installation even in upward positions. Additionally, by using the included anti-loosening nut (hard lock nut), a safer installation can be achieved, and it is also possible to inject the filler material beforehand, preventing deterioration from the gap between the drilled hole and the anchor after installation. These features make it suitable for use in telecommunications equipment construction and repair work in narrow environments where upward installation and maneuverability are required. 【Features】 - Accurate widening formation with self-undercut method - Short embedment length with a small diameter - Comfortable for upward installation - Resistant to loosening - Compatible with filler material

The "AF-50AD" is a lightweight and compact personal detector that is easy to carry and allows for convenient high-precision breath alcohol testing. By upgrading the system and linking it with a smartphone, it is possible to send alcohol measurement results to a management center while on the go. By blowing into it for about 3 to 4 seconds, it can measure alcohol concentration in the range of 0.00 to 2.50 mg/L. The alcohol concentration is indicated through warning sounds, warning lights, and numerical values. It can record up to 100 entries of "measurement results," "test numbers," and "dates and times." 【Features】 ■ Complies with alcohol detectors established by the National Public Safety Commission ■ Equipped with a fuel cell sensor ■ Uses an organic EL display ■ Comes with a dedicated mouthpiece and a nylon case for storage *For more details, please refer to the materials. Feel free to contact us with any inquiries.

The Easy Anchor is a post-installed anchor for hanging objects that complies with various standards and specifications (public construction work). 【Features】 ● Complies with various standards and specifications (EZI-3045CN, EZI-4060CN, SEZI-3045CN, SEZI-4060CN) - Standard drawings for public building equipment construction (Mechanical Equipment Construction Edition) 2022 version - Guidelines for supervising mechanical equipment construction 2019 version - Guidelines for supervising electrical equipment construction 2019 version - SHASE-S 012-2021 Post-installed anchors for building equipment - Guidelines for seismic design and construction of building equipment 2014 version ● Completion of anchor installation can be visually confirmed When tightened with an impact driver, installation is complete when the check ring protrudes. (Recommended impact driver: 14.4V or 18V) ● Visual confirmation of hanging bolt screwing Installation is complete when the hanging bolt is screwed in and the bolt checker protrudes at two points. ● Zero plastic waste Installation can be done without generating waste. ● Easy Drill With a stopper, managing the drilling length is easy. The notched part of the stopper also allows for recessing fireproof covering material.

When installing lighting equipment or CCTV equipment in areas with concerns about third-party damage using anchor bolts, it must be connected with wire ropes or similar. Sanko Techno Co., Ltd. offers post-installed anchors suitable for connecting wire ropes. In the Fail-Safe series, there are two types available: - The metal-based expanded type "Metal Undercut Anchor Fail-Safe Type" - The metal-based cone nut type "Fail-Safe Anchor" Both types can ensure accurate drilling depth by using a dedicated stopper-equipped drill for drilling. (Note: The drill for the Fail-Safe Anchor is a dust-collecting drill.) Additionally, both types can be installed using power tools, completing the installation in just a few seconds. Furthermore, completion of the installation can be visually confirmed. The connection hole in the anchor head can accommodate connections with wire ropes alone, as well as with shackles or stainless bands, allowing for various methods of fall prevention.

This product, the "Metal Undercut Anchor," is a self-undercut type expansion anchor that simultaneously drills and expands the hole wall with the anchor itself, allowing for the precise formation of a large expansion section with fewer work processes. The visual confirmation features applied to the anchor and dedicated tools enable reliable construction management. It is an expansion anchor that can implement fall prevention measures using wire ropes and similar methods. *Training is mandatory. NETIS registration number: KT-220131-A

The "IT Hanger Series" allows for easy installation from one side, even in areas where hands cannot reach, thanks to the rotation of the roll plate. New products have been added to the lineup: ◎ A new size of the "ITU type" for thin material fastening (0.4mm and above) made of stainless steel ◎ W1/2 size of the "ITL type" for ALC panels ▼ Product Features ▼ ≪ITU/ITU-S≫ - Can be fastened to thin steel plates (0.4mm and above) without using screws - Can be removed after installation (not suitable for ceilings or floors) Installation videos are available on YouTube https://www.youtube.com/shorts/NLnnAdjhpjM ≪ITL-W/ITE-WS/ITL-WS/ITL-M/ITL-MS (for ALC panels)≫ - New W1/2 size and male thread now available (ITL-W/ITL-WS) - Does not damage ALC panels with through fastening installation - Good workability due to spring function *For more details, please refer to the materials. ☆ Technical documents are available on our website.