サンコーテクノ Product Lineup

Next, we offer specialized equipment for anchor installation, including the dedicated attachment "CA," a socket "DK" that can be used simply by setting deformed rebar, and a metal wire brush "W TYPE (manual)" for cleaning chips inside the hole. For more details, please contact us or view the catalog on our website.

• Other work tools

The "Chemical Bolt CB-V/CB-VS type" is a dedicated anchor bolt for AR Chemical Setter and Denkaku Quick Capsule. By being cut from both ends, it enhances mixing performance, improves the center of gravity balance of the bolt during mixing, and has features that enhance workability. It is used for the installation of AR Chemical Setter, Denkaku Quick Capsule, and Seismic Eco Filler. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor10/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

• bolt

The "D-Type Denka Quick Capsule" is a bonding anchor that is installed by soaking it in water and then rotating or striking the bolt. It features a cement-based, non-combustible material that is easy to work with, cures quickly, and has excellent alkali resistance. It is suitable for applications such as fence installation, bridge construction, and securing protective shelves (guardrails). For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor04/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/

• glue

The "AP type" is a resin capsule anchor that exhibits almost no change in adhesion strength over time. It demonstrates excellent alkali resistance, has high initial rigidity, and features outstanding toughness, as well as being a completely sealed type. It is suitable for balcony reinforcement, snow prevention shelf installation, and fence/soundproof wall installation. For more details, please contact us or view the catalog on our website.

• glue

The "HP type" is an adhesive anchor with excellent adhesion strength due to the use of high-performance resin "epoxy acrylate resin." The adoption of non-styrene monomers has reduced unpleasant odors. Additionally, by dispersing the granular curing agent throughout the entire capsule, we have eliminated mixing inconsistencies with the resin during bolt installation. It is suitable for balcony reinforcement, snow prevention shelf installation, and fence/sound barrier installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor01/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/

• Other work tools

The "Eagle Anchor EG / SEG type" is a threaded anchor specifically designed for AR chemical setters EA-350/500S/500/500W and EX-350/EX-400L. It maximizes the performance of adhesive resins and firmly anchors within concrete holes. It is suitable for bench fixing, sound barrier installation, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor08/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

• bolt

The "EX-350/EX-400L" is an adhesive injection type IS system. It allows for application in wall and ceiling directions due to its thixotropic properties, can accommodate a wide range of bolt shapes and materials, and makes long hole construction easy. It is suitable for U-shaped and L-shaped reinforcement installation, as well as ceiling inserts. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor06/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/

• glue
• bolt

The AR Chemical Setter "EA-350/EA-500/EA-500S" is an injection-type IS system for adhesives. It features high bonding strength and long-term stability, compatibility with a wide range of bolt shapes and materials, freedom in perforation conditions, and ease of long hole construction. It is suitable for U-shaped and L-shaped rebar installation, as well as for attaching hardware to ALC. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/adhesion/anchor05/?parent_url=https://sanko-techno.co.jp/products/fastening/adhesion/

• glue
• bolt

The "DGA type" is a type of brace anchor that does not require a hand holder. It is suitable for partition bracing, ground slab, and construction elevation work. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor10/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• bolt

The "CT Anchor CT/SCT/GT/SGT/GT-D type" is suitable for lightweight construction work and temporary scaffolding installation. The "CT type" is a steel internal cone driven anchor, the "SCT type" is a stainless steel internal cone driven anchor, the "GT type" is a steel internal cone driven anchor that allows for flush installation, the "SGT type" is a stainless steel internal cone driven anchor that allows for flush installation, and the "GT-D type" is a steel internal cone driven anchor with hot-dip galvanized treatment that allows for flush installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor06/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• Other machine elements

The "GA type (made of steel)" is a screw anchor with a wide range of sizes, the "SGA type (made of stainless steel)" is an excellent corrosion-resistant screw anchor, and the "GA-D type (made of steel with hot-dip galvanized coating)" is an economical corrosion-resistant anchor. They are suitable for light steel construction and temporary scaffolding installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor09/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• Other machine elements

The "HEA type" is an anchor that can be securely fixed by cutting threads into concrete. It is suitable for temporary scaffolding, bench installation, and more. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/other/anchor03/?parent_url=https://sanko-techno.co.jp/products/fastening/other/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• Other machine elements

The Torque Control Anchor is a torque management type anchor. The "TCW type (made of steel)" is a wedge-type anchor with a male thread, the "STCW type (made of stainless steel)" is an excellent corrosion-resistant stainless steel anchor, and the "TCW-D (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. It is suitable for chair installation, piping, and duct installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor20/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• Other machine elements
• bolt

The "Torque Converter Anchor AW-BW / SAW-BW / AW-BWD type" is a suspension anchor that allows for construction management. The "AW type (made of steel)" is a wedge-type male-threaded anchor, the "SAW type (made of stainless steel)" is an exceptionally corrosion-resistant stainless steel anchor, and the "AW-BWD type (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. It is suitable for sprinkler installation, ceiling piping installation, and air conditioning equipment installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor21/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• others

The "NSB type" is an anchor that can be installed from above the equipment. It is suitable for securing elevated water tanks, attaching signs, and fixing temporary elevators. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor18/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• Other machine elements

The "NSL type" is an anchor that maintains strength even in areas subjected to repeated loads. It is suitable for mounting surgical microscopes, installing mobile cart rails, and attaching tanks. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor18/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• Other machine elements

The "BA type (made of steel)" is a tapered bolt male thread anchor, the "SBA type (made of stainless steel)" is an excellent corrosion-resistant stainless steel, and the "BA-D (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. They are suitable for mounting signs, installing distribution boards, and erecting fences. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor14/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• bolt

The "A type" is an anchor that is ideal for direct installation of thick materials. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor05/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• bolt

The "Y type" anchor features a flush finish that excels in aesthetics, while the "SY type" anchor is optimal for areas requiring corrosion resistance. It is suitable for blind mounting and electrical panel installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor02/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

• Other cutting tools

The "T / ST type" is a screwless anchor that is ideal for installation in areas where removal is not required. The "T type" is made of steel, while the "ST type" is made of stainless steel. The "FT type" is made of steel, and the "CUFT type" is made of copper. The T / ST type is suitable for blind mounting, lighting fixture installation, and hanging bracket installation, while the FT type is suitable for securing hangers, and the CUFT type is suitable for fixing copper plates. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor02/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• others

The "SC type" is made of stainless steel that is resistant to rust, while the "C-D type" is an economical steel anchor treated with hot-dip galvanization. This product can be used for a variety of applications, including handrail installation, fence post fixing, and equipment platform installation. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor01/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration is required (free).

• bolt

The All Anchor is a product characterized by its simple installation, which only requires driving in a core rod. The "C type (steel)" is a threaded anchor that uses a core rod driving method, the "SC type (stainless steel)" is made of stainless steel with excellent corrosion resistance, and the "C-D (steel with hot-dip galvanized treatment)" is an economical corrosion-resistant anchor. It is suitable for mounting handrails, installing equipment frames, and setting up vending machines. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/metal/anchor01/?parent_url=https://sanko-techno.co.jp/products/fastening/metal/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration (free) is required.

• others

Mass 3.0kg, driving time approximately 3 seconds 1. Set the push nut on the all-anchor 2. Set the all-anchor in the anchor driving machine 3. Turn on the switch 4. Completion in approximately 3 seconds For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/tools/tools01/?parent_url=https://sanko-techno.co.jp/products/fastening/tools/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). * Membership registration required (free)

• drill

Marking Groove Specification The spiral is equipped with "marking grooves," which serve as a guide for marking the drilling depth. For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/drill_bit/drill01/?parent_url=https://sanko-techno.co.jp/products/fastening/drill_bit/

• drill