森一産業 Product Lineup

We would like to introduce our "Stainless Steel Keyless Drill Chuck - Knurled Type" that we handle. Thanks to the Lufthight mechanism, there is no need for a clamp key, allowing for very simple and quick tool attachment and detachment. You can use it with peace of mind for a long time. Additionally, we offer the "Ergonomic Grip Type" for easier handling while wearing medical gloves, a "Lock Mechanism" to prevent accidental loosening of the drill, and a "Manual T-Handle" for manual operation. 【Features】 ■ All parts are reinforced and adjusted to withstand permanent specifications. ■ The body, finished with electropolishing, protects the tool from corrosion and contamination. ■ A special channel structure allows for the flushing out of internal residues. ■ Secure clamping with hard, high-quality jaws. ■ Deburred surface with rounded edges. *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "R2" is a safety shoe with a soft and lightweight two-layer rubber sole that offers high flexibility. It features a highly cushioned foam rubber midsole and a durable solid rubber outsole, achieving both "lightweight and soft feel" and "durable and long-lasting" functionality. Additionally, we offer a total of six different designs, including the semi-standard model "R2-03." Please feel free to contact us for inquiries. 【Features】 ■ Complies with JIS standard slip resistance (F1) ■ Comfortable wide resin toe cap ■ Does not ignite even at 1100°C ■ High flexibility, soft, and lightweight ■ Excellent cushioning and outstanding durability ■ R2 manufacturing method that absolutely does not hydrolyze *For more details, please refer to the PDF document or feel free to contact us.

• Safety shoes and sneakers

The "CoroDrill 860-GM" is a high-performance drill for hole depths of up to 8D. It enables long-lasting and high-quality hole processing not only for steel materials but also for stainless steel, cast iron, and ductile cast iron. Additionally, it demonstrates competitive performance in heat-resistant alloys (HRSA), aluminum, and high-hardness steel. 【Features】 ■ Reinforced flute edge ■ Reinforced corner ■ New thinning shape ■ Optimized double margin ■ New cutting edge shape *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "CoroThread 266" is a high-rigidity, high-precision threading tool with iLock specifications. By supplying coolant from both the chip clearance and relief surfaces, it enhances machining stability and achieves superior surface quality with excellent cutting edge cooling effects for longer tool life. The rail lock system iLock firmly secures the chip, ensuring excellent machining tolerances and surface quality. 【Features】 ■ High-precision coolant specification, with a maximum coolant pressure of 15 MPa ■ Unique robust rail lock system ■ HP (High-Precision Coolant) type ■ Quick change tool replacement *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Nextage One" is an artificial leather glove that has no distinct smell of leather and excels in breathability and fit. It features microfiber synthetic leather and moisture-wicking, quick-drying knitted fabric, with gun-cut sewing. Additionally, it comes with a rubber shaft magic fastener. We also offer a variety of products, including the "PU-WAVE," which provides excellent fingertip sensitivity, the high-quality synthetic leather glove "PU-KING," and the ultra-thin, lightweight "PU Gloves Light" that is ideal for detailed work. 【Product Lineup (Partial)】 ■ Hoover Microfiber Gloves ■ PU-WAVE ■ PU-KING ■ Hoover Synthetic Leather Gloves ■ PU Synthetic Leather Gloves *For more details, please refer to the PDF document or feel free to contact us.

• Work gloves

This catalog introduces a modular system with interchangeable heads that allows for the use of various heads with a single holder. We feature options such as "cylindrical shanks," which allow you to choose size and high rigidity according to the outstanding length, and "BT shank integrated" options that significantly improve productivity. Additionally, we present three key features of the products and examples of their use. Please make use of this information when selecting products. [Contents] ■ Coromant EH - Three Key Features ■ Extensive Holder Lineup ■ Extensive Head Lineup ■ Usage Examples ■ CoroMill(R)316 Cutting Conditions *For more details, please refer to the PDF document or feel free to contact us.

• cutter

This catalog introduces hydraulic chucks that prevent tool pull-out. We have a wide range of products, including heavy-duty cutting types of "BT," slim types of "BIG-PLUS BT," and pencil types of "Coromant Capto." Additionally, we also showcase product features and examples of collet usage. Please make use of this information for selecting products. 【Featured Products (Partial)】 ■BT ■BIG-PLUS BT ■Coromant Capto ■HSK ■CoroChuck930 cylindrical collet 393.CGS/393.CG ■CoroChuck930 cylindrical collet 393.CGS/393.CG (for oversized) *For more details, please refer to the PDF document or feel free to contact us.

• Chuck

"Abratool Roll Type Oil-Only" is a suitable oil absorbent material for frequently used areas. It has perforations every 500mm, making it easy to cut by hand. We offer two widths: "PCR40-50R" at 400mm and "PCR80-50R" at 800mm. Please feel free to contact us when you need assistance. 【Features】 ■ Long type with a length of 50m ■ Suitable for frequently used areas and extensive applications ■ Easy to cut by hand due to perforations every 500mm ■ Available in two widths: 400mm and 800mm *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools

The "Abrator Roll Type Oil-Water Dual Use" is a roll-type oil absorbent material with a thickness of 1.5mm. There are two types available: "PCAR40-50R" with a width of 400mm and an absorption capacity of 33.75L per roll, and "PCAR80-50R" with a width of 800mm and an absorption capacity of 67.5L per roll. It is suitable for areas with frequent use or for extensive applications. 【Features】 ■ Long type with a length of 50m ■ Easy to cut by hand due to perforations every 500mm in width ■ Available in two widths: 400mm and 800mm *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools

The "Abrator Tube Type Oil and Water Absorbent" is a suitable absorbent material for oil, water, and water-soluble cutting oils. It has strings attached at both ends, allowing for connection. Additionally, it is made of polypropylene, which provides chemical resistance (to acids and alkalis). Please feel free to contact us for inquiries. 【Features】 ■ Suitable for absorbing oil, water, and water-soluble cutting oils ■ Minimal fluffing and fiber residue, making it less likely for fibers to stick to equipment or workpieces ■ Made of polypropylene, offering chemical resistance (to acids and alkalis) *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools

The "BP type" is a caster designed to overcome obstacles and ensure safe and smooth logistics. It is equipped with a supplementary function called "Didrive" that allows it to overcome obstacles of approximately 40mm. This reduces detour time, streamlining operations and alleviating the burden of work. It can be used for applications such as hand trucks and roll box pallets, solving issues in logistics environments. Please feel free to contact us when you need assistance. 【Features】 ■Reduction of work burden (smooth transportation) ■Efficiency in operations (reduction of detour time) ■Safe transportation (improvement of logistics quality) ■Equipped with the supplementary function "Didrive" to overcome obstacles of approximately 40mm ■Lineup: BPT125RHKP2SF-DD9090/DD8080/DD1056 *For more details, please refer to the PDF document or feel free to contact us.

• caster
• wheel

The 'SKY-2 Type (Shock Absorption Type)' that we handle is a premium urethane caster that can be pushed with one hand under a total load of 500kg. To reduce lateral wobble of the wheels, we have adopted a uniquely developed aluminum wheel. This also helps to suppress the occurrence of the "shimmy phenomenon," where the wheels vibrate finely during high-speed towing. Additionally, to accommodate various load capacities, we offer two types of built-in springs, allowing you to choose the appropriate cushioning performance based on the set load for the items being transported. Please feel free to contact us when you need assistance. 【Features】 ■ Starting turning force of approximately 15kg ■ Protects the load from vibrations and shocks ■ Reduces work burden ■ Low noise for comfort ■ Selectable springs according to application: 100daN/200daN *For more details, please refer to the PDF document or feel free to contact us.

• caster
• wheel

The "SKY-2 Type" is a shock and vibration-resistant cushion caster. It has excellent starting maneuverability, reducing the workload. It improves the initial movement, which feels the heaviest during transport, while achieving smooth turning performance during direction changes. Additionally, to accommodate various load capacities, we offer two types of built-in springs. You can select the appropriate cushioning performance based on the set load according to the transported items. 【Features】 ■ Absorbs shocks and vibrations, reducing damage to the load ■ Minimal wheel wear, achieving long lifespan ■ Excellent starting maneuverability, reducing workload ■ Minimizes shimmy phenomenon, providing low noise and comfort ■ Selectable springs according to application: standard loads of 100daN/200daN *For more details, please refer to the PDF document or feel free to contact us.

• caster
• wheel

The "PMS-150 (E46)" we handle is an industrial caster type that emphasizes starting performance and is designed for long life and reduced running costs. Thanks to the newly designed bearing structure, it reduces the shimmy phenomenon (vibration caused by eccentric rotation). With stable maneuverability, it prevents steel ball indentations on the track surface, ensuring smooth operation lasts longer. In addition to this product, we also offer load-bearing focused types, allowing you to choose according to your application. Please feel free to contact us when you need assistance. 【Features】 ■ Minimal wheel wear, achieving long life ■ Excellent starting maneuverability, reducing work burden ■ Controls shimmy phenomenon, providing low noise and comfort ■ New bearing structure enhances steel ball retention *For more details, please refer to the PDF materials or feel free to contact us.

• caster
• wheel

"DA Plus" is a professional sneaker made of JSAA certified Type A synthetic leather. It is 216g lighter than the old DA series, making footwork more agile. With over 50% improvement in slip resistance, it is safer. The grooves in the midsole have made the fit softer. Please feel free to consult us when you need assistance. 【Features】 ■ Arch support plus that supports the arch of the foot ■ 219g lighter, making footwork more agile ■ Over 50% improvement in slip resistance for greater safety ■ Grooves in the midsole for a softer fit *For more details, please refer to the PDF document or feel free to contact us.

• Safety shoes and sneakers

"Two Fix" is a stylish spring-type tool rack that can be neatly arranged. It is easy to attach and detach, making it ideal for organizing tangled wires. By installing it near your workspace, you can quickly and reliably switch tools during work, naturally keeping things organized. 【Features】 ■ Easily holds items by simply pushing or hooking them ■ The yellow plastic components prevent scratches and rust ■ The holding power can be adjusted by attaching or detaching the components ■ The base is made of aluminum ■ Maximum tool diameter: approximately φ25mm *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "PMS-150APU" is a low-noise, comfortable premium urethane caster. With a newly designed bearing structure, it enhances the retention of steel balls, significantly improving turning start performance while reducing rolling fatigue. The stability of the turning performance prevents the occurrence of steel ball indentations on the track surface, ensuring smooth mobility lasts longer. In addition to this product, which focuses on load performance, we also offer the "PMS-150APU (E46)," which emphasizes turning performance, allowing for selection based on application. 【Features】 ■ PMS type ■ Reduces shimmy phenomenon due to new bearing design ■ Reduces work burden ■ Lowers running costs ■ Low noise and comfortable *For more details, please refer to the PDF materials or feel free to contact us.

• caster
• wheel

The "CoroTurn HP (High Pressure)" is a turning tool for high-pressure coolant that improves cutting speed by 30% due to the cooling effect at the chip cutting edge. With precise positioning of the high-pressure coolant, it finely divides chips. In workpieces that tend to produce long chips, such as low carbon steel and stainless steel, it prevents chip entanglement issues and contributes to automation and unmanned processing. 【Features】 ■ Finely divides chips ■ 30% increase in cutting speed ■ Reduces friction and temperature rise at the cutting edge, improving tool life by 50% ■ High versatility that does not depend on the machine used ■ Established coolant nozzle technology *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Deluxe G" is a pair of work gloves made from 100% cotton yarn, designed with consideration for the skin, using natural fibers. In addition, we offer a variety of products including "Cotton Work Gloves with Cuffs," "Cotton Blend Work Gloves," and "Special Defense Work Gloves." You can choose according to your needs, considering factors such as thickness, thinness, lightness, and material differences. 【Product Lineup (Excerpt)】 ■ 100% Cotton Work Gloves - Deluxe G - Otafuku G ■ Cotton Work Gloves with Cuffs - Deluxe A - Super A *For more details, please refer to the PDF document or feel free to contact us.

• Work gloves
• Other safety and hygiene products

We would like to introduce the "C3 to C6" polygon taper shank tooling for CNC lathes and multi-functional machining machines. The rigidity is increased by the dual-surface constrained polygon taper shank conforming to ISO standards. The polygon coupling ensures that the repeat mounting accuracy in the rotational direction is extremely stable and precise. Additionally, we also design and manufacture the blank material for the polygon taper shank. 【Features】 ■ High rigidity ■ High repeat mounting accuracy ■ "R" zero (runout adjustment) function: allows adjustment of cutting edge runout to below 2μm ■ Vibration damping function: vibration damping through hydro clamping *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Other work tools

The "Coro Drill DS20" is a high-performance drill with interchangeable tips developed to enhance performance. It features a new chip shape and a layout design for the center and peripheral cutting edges. Thanks to its unique drill flute design, the body rigidity has been improved, allowing for protrusion machining up to 7×DC without pilot holes in the realm of interchangeable tip drills. 【Features】 ■ Flute Cross-Section Shape - Radial cutting resistance is supported by the flute cross-section - The flute cross-section is uniform and wide - The center of the cross-section aligns with the center of the drill - The trapezoidal cross-section has different shapes for the center and peripheral cutting edge flutes - Optimized for rigidity and chip removal from the perspective of each drill diameter *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "cup brush" is an industrial brush made from high carbon steel or stainless steel. Stainless steel is a high-purity stainless alloy that is rust-resistant, heat-resistant, and uses wires that are less prone to bending. Additionally, we also offer "bevel brushes" of different shapes and sizes, as well as crimped-type "hand brushes." 【Specifications (partial)】 ■ Model number: 608131 ■ Wire material: High carbon steel ■ Outer diameter (φmm): 65 ■ Arbor hole (mm): M10×1.5 ■ Wire diameter (φmm): 0.35 *For more details, please refer to the PDF document or feel free to contact us.

• Brush

The "Hyper Blade" is a multi-scissors with replaceable blades that cuts materials cleanly without crushing them. With typical two-blade scissors, the cut edge can become slanted or uneven, but with this product's single-blade design, even electric cords and hoses are cut with a straight and clean edge. It can be used for cutting soft materials such as plastic, rubber, urethane, sponge, and paper. 【Features】 ■ Replaceable blades for lasting sharpness ■ Special dedicated blade for exceptional cutting performance ■ Replacement blades available for purchase separately *For more details, please refer to the PDF document or feel free to contact us.

• Cutter/Scissors

"Aburatoru" is a sheet-type oil absorbent material made of polypropylene with anti-static treatment. It absorbs only oil, making it effective for outdoor work. The box is packaged in a bag with anti-static treatment, allowing for safe storage. 【Specifications】 ■ Size: 400mm (length) x 500mm (width) ■ Thickness: 4mm ■ Quantity: 100 sheets ■ Absorption capacity: 0.9L/sheet, 90L/box *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "J45FL" is an open-type floor fan. The airflow can be switched between low, medium, and high using a three-stage rotary switch. The dimensions are 400mm in height, 500mm in width, and 700mm in depth, with a power cord length of 1.8m. Additionally, there is the "J45K," a 45cm, single-phase 100V open-type caster fan. Please use aluminum blades in areas where high frequency and oil mist are present. 【Specifications】 ■ Power supply: Single-phase 100V ■ Frequency: 50/60Hz ■ Power consumption: 130/150W ■ Airflow: 161/187m3/min ■ Air speed: 323/375m/min *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

We would like to introduce our "Falcon Ball End Mill." It can handle both outer circumference and grooves. It also demonstrates outstanding lifespan in five-axis three-dimensional machining. Please adhere to the feed rate per edge as much as possible, and base the cutting speed and feed rate on the feed rate per edge. 【Features】 ■ High efficiency in machining heat-resistant alloys ■ Excellent performance with SUS-related and alloy steels ■ High rigidity even with high hardness materials of HRC 60-65 ■ A design that balances core thickness to minimize vibration and cutting performance *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

The "Dynasty AIR" is a professional sneaker made of A-type artificial leather with water-repellent properties. The air cushion that protects the initial landing point of the heel is offset to the outside. This naturally guides the body weight outward, promoting proper walking posture, and has successfully reduced the weight to approximately 80g per shoe (size 26cm). The toe is equipped with a metal or hard resin toe cap, meeting the safety and durability certification standards set by the Japan Safety Products Association. 【Features】 ■ Made from materials that are resistant to water and rain, making maintenance easy ■ Antibacterial and deodorizing insole; steel wide toe cap ■ Enhanced slip resistance ■ Health structure that supports the arch ■ JSAA certified A-type *For more details, please refer to the PDF document or feel free to contact us.

• Safety shoes and sneakers

We would like to introduce the "special gloves" from Otafuku Gloves that we handle. Starting with the "Soft Catch EX-FIT Safety," we also offer the "MWK," which incorporates aramid and stainless steel wire to enhance cut resistance, as well as the "Super Aramid," which maintains flexibility and durability without compromising the delicate movements of the hands. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ Soft Catch EX-FIT Safety ■ Cut-resistant gloves "MWK" ■ Super Aramid gloves *For more details, please refer to the PDF document or feel free to contact us.

• Work gloves

The "ER-200" is a UV curing resin set for Aiger professionals. It consists of the UV curing repair material "ER-650" and the pen-type UV light "ER-140." It can be used for various applications such as repairing cords, insulation, shaping lures, and making accessories. Please feel free to contact us when you need assistance. 【Basic Usage】 ■ Layer 1: Apply approximately 1mm and cure it. ■ Layer 2: Apply another 1mm on top of the first layer and cure it. ■ Layer 3: Repeat the application and curing process thereafter. *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

We would like to introduce the 'JSF500-1/3' that we handle. With casters, it is easy to move, and the static wings allow for straight airflow without diffusion. The angle adjustment bolts enable vertical angle adjustments. This circulator can be used to eliminate air stagnation and as a circulation fan in factories. Please feel free to contact us when you need assistance. 【Features】 ■ Air reach distance: approximately 30m ■ Quiet and comfortable operation (approximately 66dB) ■ Energy-saving (power consumption 175/240W) ■ Easy to move with casters ■ Adjustable vertical angle *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Falcon Emerald End Mill" is an end mill with extremely strong cutting edge rigidity. It enables high-speed machining even in difficult-to-cut material groove processing with a cutting depth of 1D to 2D. It has excellent chip evacuation performance, which leads to reduced time, increased production efficiency, and cost savings. Additionally, we also offer the "Falcon Wave End Mill," which allows for ultra-high feed rates and deep radial cutting during shoulder machining. 【Features】 ■ Core thickness design ■ Unique gash shape ■ Increased production efficiency through time reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Rektor Seal" is an easy-to-use repair epoxy putty that can be simply cut and kneaded together. It has various applications such as repairing holes and cracks, adhesion, sealing, molding, and surface reformation. It begins to harden in 5 to 10 minutes and fully sets in 15 to 20 minutes. After more than an hour of hardening, it can be processed by tapping, polishing, or painting. 【Applicable Materials (excerpt)】 ■ Stainless Steel ■ Iron ■ Copper ■ Wood ■ Aluminum *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

"Rapid Fix" is an instant adhesive repair material that can quickly repair various materials at high speed. After curing, it can be sanded, drilled, and painted. By combining liquid (polymer liquid adhesive) and powder (welding powder), it makes repairing holes, cracks, and chips easy and powerful. 【Compatible Materials (Excerpt)】 ■SGP ■Metal ■PVC ■Ceramics ■Plastic *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

We would like to introduce the "Edge Finder for NC Milling Machines and Machining Centers" that we handle. When the edge finder is attached to a milling chuck and rotated at 500 min-1, it becomes eccentric. By coloring the sides, it has become easier to confirm the moment of sliding. (Excluding EF1010TIN-NM and EF1004TIN-NM) 【Lineup】 ■EF1010 ■EF1010TIN-NM ■EF1004 ■EF1004TIN-NM ■EF0606 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "JMP-02S (Single Phase 100V)" is a centrifugal mist fan capable of spraying mist over a wide area. It can be directly connected to a water hose. Since it generates mist using a centrifugal method without nozzles, there is no concern about clogging. It can be adjusted to an angle of about 20 degrees above horizontal. 【Features】 ■ Centrifugal method ■ Angle adjustment ■ Automatic oscillation function ■ Water volume adjustment valve ■ Large capacity tank (60L) *For more details, please refer to the PDF document or feel free to contact us.

• Humidification device

The "CoroMill 390" is a face and shoulder milling cutter designed for internal cooling. It accommodates face milling, shoulder milling, helical machining, and plunge machining. It features a cylindrical shank, arbor mounting, vibration-resistant design, and a lightweight type made through additive manufacturing. Custom-made (semi-standard) options are available for short delivery times, and the Inveio coating provides high wear resistance and a long tool life. 【Features】 - Wide range of applications and high performance - Tool diameter: φ9.7 to 200mm - Maximum depth of cut: up to 71mm - Energy-saving cutter that contributes to power savings - Easy to use with small machines *For more details, please refer to the PDF materials or feel free to contact us.

• cutter

The "OH/C/MS type" is a small diameter collet holder that uses ER collets. It supports a maximum of 40,000 RPM (varies by size) and features a design that considers balance, along with finishing processing of the outer shape after heat treatment. With an outer diameter of φ12, it can chuck gripping diameters from φ0.5 to φ5.0. The asymmetric shape of the shank (HSK, SK, CAT) eliminates imbalance through counterbalancing. 【Features】 ■ A wide range of shank sizes available ■ High balance achieved through finishing processing ■ Pre-balance design (cap and shank) ■ Uses ER collets ■ 16° taper used worldwide *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

We would like to introduce the Inplus milling cutters that we handle. We offer the standard type "IEMP01" and the roughing type "IEMP04." We also have milling cutter tips and clamp screws available. Please feel free to contact us if you have any inquiries. 【Product Lineup (Excerpt)】 ＜IEMP01＞ ■IEMP01-012-G16-AP11-01 ■IEMP01-020-G20-AP11-02 ■IEMP01-025-G25-AP11-03 ■IEMP01-032-G32-AP16-03 ■IEMP01-050-G32-AP16-05 *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "ESK463/793" is a stainless steel cable tie that can be used in all weather conditions, both outdoors and indoors. It can withstand temperatures from -80℃ to 500℃. The loosening after tightening is extremely minimal, making it a product with outstanding cost performance compared to general products. It can be used for securing and bundling exhaust pipes, hoses and piping, motorcycle and car muffler covers, signboards, electrical wires, posts, poles, cables, and more. 【Features】 ■ Strong against direct sunlight and rain ■ Usable in all weather conditions, both outdoors and indoors ■ Heat resistant from -80℃ to 500℃ ■ Extremely minimal loosening after tightening ■ High cost performance *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other safety and hygiene products

The "J450/45Z1V" is an open-type/closed-type stand fan for factories. Equipped with a thermal protector, it offers three levels of airflow: low, medium, and high. It features an automatic oscillation function with approximately 70 degrees of left and right movement, and the height can also be adjusted. Additionally, the "45Z1V" can be folded with its three legs. Please feel free to contact us if you need assistance. 【Specifications】 ■ Power supply: Single-phase 100V ■ Frequency: 50/60Hz ■ Power consumption: 130/150W (J450), 110/130W (45Z1V) ■ Airflow: 161/187m3/min ■ Wind speed: 323/375m/min *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Falcon White End Mill" is a carbide end mill designed for ultra-heat-resistant alloy difficult-to-cut materials. It features an SPWC coating with a helix angle of 51°, and is available in four different model numbers with cutting diameters ranging from 6 to 12 and cutting lengths from 18 to 36. This product has six cutting edges and is used for machining difficult-to-cut materials. Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■SPHF6-6 ■SPHF6-8 ■SPHF6-10 ■SPHF6-12 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "MT4AL-10" is a live center for NC machines. It is available in two versions: "MT4AL-10" with a tip angle of 60°, a tip diameter of Φ10, and a length of 18L, and "MT4AL-16" with a tip diameter of Φ16 and a length of 30L. It helps avoid interference with cutting tools during NC lathe processing. Please feel free to contact us if you have any requests. 【MT4AL-10 Specifications】 ■Φd: 10 ■L1: 18 ■L2: 103.8 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"DIXI 1740" is a carbide drilling thread that consolidates three processes—centering, chamfering at 90°, and drilling—into one tool. With just one tool, it enables a reduction in cycle time, increased productivity, and shortened manufacturing time. In a typical three-step process, the cycle time takes just under 30 seconds, but with this product, it can be reduced to just under 20 seconds. 【Processing Example (Partial)】 ■Dimensions: M1.00×0.25 ■Material: Titanium TAP6400H ■Number of Flutes: 1 ■Processing Depth: 2 ■Rotational Speed: 30,000 *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "Coromill® 415" is a small-diameter high-feed face milling cutter. With a high chip removal rate and a 4-corner insert design, it provides a cost-effective and productive solution. Additionally, the unique iLock™ interface delivers reliable and stable performance. 【Features】 ■ Low cutting resistance ■ Suitable insert material for difficult-to-cut materials ■ Additional insert programs *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "PHC・SB" is a slim hydro chuck designed for interference prevention during wall-side machining, featuring a slender design. Its unique hydraulic chamber structure achieves high vibration absorption effectiveness. Since the hydraulic chamber surrounds the chucking sleeve, vibrations during cutting are absorbed. We also offer the straight shank hydro chuck "ST-PHC・SB" and the slim hydro chuck blaster "PHC・SB-C/PHC・SB-NC." 【Features】 ■ Runout accuracy: 3μm (4d tip Max 100mm) ■ Good cutting surface due to vibration damping effect ■ Repeatable chucking accuracy: 1μm ■ Easy chucking with just one wrench ■ Maximum allowable rotation speed: 40,000 min^-1 ■ Gripping diameter: Φ3.0 to Φ25.0 *For more details, please refer to the PDF document or feel free to contact us.

• drill