アドバン List of Products and Services

We would like to introduce a case study on the implementation of the finishing estimation software "Neo Finishing" at Nagamura Corporation. The company was struggling with the time consumed by various estimation tasks. They considered implementing a system that could shorten the estimation process and trialed the estimation system from Advan for two months, which was available for testing. Both the structural and finishing estimations were relatively easy to operate, and they felt a significant improvement in estimation efficiency, leading to their decision to purchase. [Case Overview] ■ Implementing Company: Nagamura Corporation (Kyoto City, Kyoto Prefecture) ■ Employee Size: Less than 100 to 500 people ■ Implemented System: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)

We would like to introduce a case study on the implementation of the RC structural estimation software "Matsusuke-kun" at Morikawa Corporation. The company had been considering the purchase of structural estimation software for some time, as improving their estimation operations was a challenge. When purchasing, they hoped for ease of use and simplicity in operation, and since the software allowed for a trial before purchase, they conducted a test. They estimated four projects before the implementation, and from the second project onward, they were able to operate without guidance. The estimation accuracy was precise, and the estimation time was about five times faster compared to using traditional spreadsheet software, leading to great satisfaction. [Case Overview] ■ Implementing Company: Morikawa Corporation (Hakodate City, Hokkaido) ■ Employee Size: Less than 100 to 500 people ■ Implemented System: Matsusuke-kun *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)

We would like to introduce a case study of Fusō Construction Co., Ltd. implementing the finishing estimation software "Neo Finishing." The company was considering the introduction of a system to shorten the time for estimation work, focusing on ease of operation and the ability to handle complex shapes. In the process of introducing the architectural estimation system, they evaluated two structural estimation systems. Among them, our structural estimation system was easy to operate and could also accommodate buildings with complex shapes. "They are very satisfied, stating that the finishing estimation system is simple and easy to understand, and the more familiar they become with it, the deeper the system reveals itself." 【Case Overview】 ■ Implementing Company: Fusō Construction Co., Ltd. (Akishima City, Tokyo) ■ Employee Size: Less than 100 to 500 people ■ Implemented System: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)

Takasaka Co., Ltd. was looking to complete the time-consuming task of estimation in a short period. They considered the introduction of an estimation system that could be completed on a computer and conducted a three-month trial evaluation of Advantech's finishing estimation software, Neo Finishing. This time, they specifically used the finishing estimation system. Instead of filling out the estimation sheet, by inputting the calculation formulas, they could simply specify the printing, and the summary table, calculation documents, and estimates were generated, resulting in significant efficiency improvements. Additionally, since it is compatible with other companies' estimation systems, the data from the previously used system can be utilized directly, making it very convenient. It is believed that the efficiency has increased by three to five times compared to before. [Case Overview] - Implementing Company: Takasaka Co., Ltd. (Miki City, Hyogo Prefecture) - Employee Scale: Less than 50 to 100 people - Implemented System: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)

We would like to introduce a case study of the finishing estimation software "Neo Finishing" implemented by Daijin Construction Co., Ltd. The company faced the challenge of improving the efficiency of its estimation operations at the time of implementation. It was essential for the estimation work to be completed in a short time, and a flexible system was desired. The simple and user-friendly system from Advantech perfectly met these expectations. About 12 years have passed since its implementation (as of November 2021), and both structural and finishing estimations can be linked to CAD data, resulting in a reduction in estimation time. Recently, we learned that we can create 3D models and perspectives based on CAD data drawn for estimation, and we would like to utilize this for sales support. 【Case Overview】 ■ Implementing Company: Daijin Construction Co., Ltd. (Naha City, Okinawa Prefecture) ■ Employee Scale: Less than 100 to 500 people ■ Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)

We would like to introduce a case study of Tanaka Construction Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company was facing issues with time-consuming estimation processes, often resulting in overtime work, which became a burden. To address this, they considered implementing a system to shorten the estimation tasks. However, they needed a straightforward system that employees could easily continue to use, rather than a complex one. As a result, everyone in the construction department was able to master the system, achieving a tenfold increase in efficiency for structural estimation and three to five times for design estimation compared to traditional manual methods. **Case Overview** - Implementing Company: Tanaka Construction Co., Ltd. (Towada City, Aomori Prefecture) - Employee Size: Fewer than 10 to 50 employees - Implemented System: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Software (middle, driver, security, etc.)

We would like to introduce a case study of Yokoo Construction Co., Ltd., which has implemented our finishing estimation software, Neo Shiai. At the company, unnecessary time was spent on tasks that became redundant during estimate management, especially during busy periods, which sometimes put pressure on operations. They considered a system that could manage everything more efficiently and decided to implement the finishing estimation software, Neo Shiai. Our estimation creation software links estimation data to the actual budget, allowing it to be used for each site, resulting in improved efficiency compared to traditional estimation methods. [Case Overview] ■ Implementing Company: Yokoo Construction Co., Ltd. (Honjo City, Saitama Prefecture) ■ Employee Size: Less than 10 to 50 people ■ Implemented System: Neo Shiai *For more details, please refer to the PDF document or feel free to contact us.

• Other embedded systems (software and hardware)

We would like to introduce a case study of Yamashita Construction Co., Ltd., which has implemented our RC structure estimation software, "Matsusuke-kun." The company was previously performing quantity takeoffs manually, which was time-consuming. To improve efficiency and perform estimations in a shorter time, they decided to purchase the software. As a result, there has been a significant increase in efficiency for estimating RC and steel structure foundations, and they received feedback from customers stating, "It has become possible for anyone, regardless of the head office or any branch, to perform estimations, which has been a great help." **Case Overview** - Implementation Site: Yamashita Construction Co., Ltd. (Gujo City, Gifu Prefecture) - Employee Size: Less than 50-100 people - Software Implemented: Matsusuke-kun *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Abe Jukumi Co., Ltd., which has implemented our RC structure estimation software, Matsusuke-kun. The company decided to introduce an estimation system for business improvement but was unsure which system to choose. They considered our software, which has a trial period, and evaluated it for two months before the official implementation. As a result, they stated, "After receiving simple operational guidance for about two hours, I was able to understand everything else through phone support. I believe anyone who understands construction can use this system." **Case Overview** - Implementation Site: Abe Jukumi Co., Ltd. (Aomori City, Aomori Prefecture) - Employee Size: Less than 10 to 50 people - Software Implemented: Matsusuke-kun *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Fujimoto Construction Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company was considering the introduction of a system to improve the efficiency of desk work, such as estimation and calculation. While there are various software options available, it was important that the system be easy to understand and use for everyone. During the trial period, they estimated about three projects, and since the operation was simple and the estimation accuracy was good, they decided to implement it. As a result, we received the feedback, "With this system, anyone who understands construction can use it, so we have implemented it on all computers in the construction department, significantly increasing our estimation efficiency." **Case Overview** - Implementation Site: Fujimoto Construction Co., Ltd. (Aomori City, Aomori Prefecture) - Employee Size: Less than 50 to 100 people - Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Joban Development Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company previously introduced an estimation software but hardly used it due to its complex operations and the many procedures that needed to be memorized. They were looking for software that could allow them to estimate in a way that felt close to actual business operations. As a result, we received feedback saying, "After trying the Advantech finishing estimation software, we confirmed that it is close to manual work and can be used by anyone." **Case Overview** - Implementation Location: Joban Development Co., Ltd. (Iwaki City, Fukushima Prefecture) - Employee Size: Less than 100 to 500 people - Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Kawasaki Construction Co., Ltd., which has implemented our finishing estimation software, "Neo Finishing." At that time, the company was considering the introduction of a structural estimation system for business improvement. Now, they have implemented both a finishing estimation system and a structural estimation system, but they had been using the structural estimation system since the DOS era. When transitioning to Windows, they considered other companies' structural estimation systems, but found that there were not many usable systems available. Ultimately, they concluded that "Matsusuke-kun" seemed to be the best option for the structural estimation system and decided to purchase it. As a result, they expressed, "It was really great to choose 'Matsusuke-kun' because it now supports wall-type structures that we couldn't handle in the DOS era and allows for easy operation even with deformed buildings." *For more details, please refer to the PDF document or feel free to contact us.

• Data conversion software

We would like to introduce a case study of Ishii Gumi Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company was considering the introduction of software for estimation and quotation creation but was unsure which software would be the best choice. They tried various trial versions of software to find one that was user-friendly. As a result, they stated, "Before the implementation, we borrowed and tried software from several manufacturers, but the one from Advan was the easiest to use. It's also great that the operations can be easily remembered." **Case Overview** - Implementation Site: Ishii Gumi Co., Ltd. (Fujishi, Shizuoka Prefecture) - Employee Size: Less than 100 to 500 people - Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Seto Construction Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company had tried to introduce estimation software to reduce estimation time, but it was hardly used, and they continued to spend a lot of time on estimations. Therefore, they considered an estimation software that would be meaningful to implement and could be used for a long time. As a result, they said, "After trying the Advantech finishing estimation software this time, I found it easy to pick up with a manual picking feel, and I was able to learn it easily even as a beginner. Now, I can't work without this software." **Case Overview** - Implementation Site: Seto Construction Co., Ltd. (Odawara City, Kanagawa Prefecture) - Employee Size: Less than 50 to 100 people - Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of the RC structure estimation software "Matsusuke-kun," which was implemented by Kojima Architectural Design Office, Inc. The company had often found the estimation of structures to be cumbersome and had been considering whether there was a simpler way to do it. Then, they were informed by a local design office about a very user-friendly structure estimation system, and although they were somewhat skeptical, they decided to give it a try. As a result, they were initially doubtful, but after actually using it, they found it to be an excellent system that everyone was able to master with little to no operational guidance. **Case Overview** - Implementation Site: Kojima Architectural Design Office, Inc. (Fukushima City, Fukushima Prefecture) - Employee Size: Less than 10 to 50 people - Software Implemented: Matsusuke-kun *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Enshu Construction Co., Ltd., which has implemented our RC structure estimation software, "Matsusuke-kun." The company had been considering an estimation system for some time, but progress had stalled. They were looking for software that was easy to use and had few restrictions, and the ability to estimate without being limited by shape was the deciding factor for adopting our product. Another condition for the implementation was the ability to incorporate data from equipment contractors into the breakdown. **Case Overview** - Implementation Site: Enshu Construction Co., Ltd. (Hamamatsu City, Shizuoka Prefecture) - Employee Size: Less than 50 to 100 people - Implemented Software: Matsusuke-kun *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Nagata Gumi Civil Engineering Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company often faced challenges with time-consuming estimate creation, especially in situations where they had to handle a sudden influx of work. As a solution, they considered the introduction of software that would allow anyone to easily create estimates. As a result, they shared, "Advan's estimation software allows several people to divide the work and combine the estimates, so we can submit busy estimates quickly. Additionally, it's great that estimates created in spreadsheets can be easily imported into 'KensukeNeo.'" **Case Overview** - Implementation Site: Nagata Gumi Civil Engineering Co., Ltd. (Kofu City, Yamanashi Prefecture) - Employee Size: Fewer than 50 to 100 people - Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Hirama Corporation, which has implemented our finishing estimation software, Neo Finishing. The company previously relied on manual estimation, which was very time-consuming. They considered that a system that could perform estimations solely on a computer would be convenient. As a result, since the implementation, their work efficiency has significantly improved. "We finally found a system that we can use continuously. We look forward to the biannual updates every year," they said. [Case Overview] ■ Implementation Site: Hirama Corporation (Shiroishi City, Miyagi Prefecture) ■ Employee Size: Fewer than 10 to 50 employees ■ Implemented Software: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.

• Data conversion software

We would like to introduce a case study of Nakashiro Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company was taking a long time to carry out estimation tasks manually. Therefore, they considered introducing software that could perform estimations without manual work. They first tried our software, which offers a free trial. As a result, they were able to learn how to operate it with little to no guidance. The customer stated, "This software is so easy that we aim for all members of the construction department to be able to operate it." **Case Overview** - Implementation Location: Nakashiro Co., Ltd. (Nagoya City, Aichi Prefecture) - Number of Employees: Less than 50 to 100 - Software Implemented: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Ishii-gumi Co., Ltd., which has implemented our architectural estimation software 'Kensuke Neo'. The company was considering the introduction of software for quantity takeoff and estimation but was unsure which software to choose. They tried various trial versions of software to find one that was user-friendly. As a result, they borrowed and tested software from several manufacturers, and found that the one from Advant was the easiest to use. They also appreciated how easy it was to learn the operations. [Case Overview] ■ Implementation Client: Ishii-gumi Co., Ltd. ■ Employee Size: Less than 50 to 100 people ■ Implemented Software: Kensuke Neo By integrating with 'NEO Finishing', PDF data can be converted to JW-CAD, making it easy to extract quantities. This significantly reduces the effort required for quantity takeoff. *For more details, please refer to the PDF materials or feel free to contact us.

• Data conversion software

We would like to introduce a case study of Seino Construction Co., Ltd., which has implemented our finishing estimation software, Neo Shiai. In the current labor shortage, the company found that there were limits to how much estimation could be accurately handled by human resources alone. Therefore, they searched for good software that could improve efficiency, and our estimation system caught their attention. After borrowing the system for two months for trial evaluation, they found it user-friendly and significantly improved efficiency, leading to their decision to implement it. **Case Overview** - Implementation Site: Seino Construction Co., Ltd. (Ibigawa Town, Gifu Prefecture) - Employee Size: Less than 100 to 500 employees - Implemented Software: Neo Shiai *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Marushin Shitaka Construction Co., Ltd., which has implemented our finishing estimation software, Neo Shiai. The company faced issues with frequent backtracking during re-proposals of estimates using their traditional in-house system. To address this, they considered estimation software to efficiently create estimates. As a result, they established a network and are now fully operational, allowing for quick responses to re-proposal estimates. **Case Overview** - Implementation Site: Marushin Shitaka Construction Co., Ltd. (Tateyama Town, Toyama Prefecture) - Employee Size: Fewer than 50 to 100 people - Software Implemented: Neo Shiai *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Tokyu Construction Co., Ltd., which has implemented our RC structure estimation software, "Matsusuke-kun." The company was considering a review of their existing structure estimation system due to the expiration of its lease. To introduce a superior system, they trialed and compared several systems, including our product. Upon comparing our structure estimation system with their previously used system, they decided to implement it due to its advantages, such as being able to handle complex building shapes and being responsive to requests for system improvements. **Case Overview** - Implementation Client: Tokyu Construction Co., Ltd. (Shibuya, Tokyo) - Employee Size: 1,000 and above - Implemented Software: Matsusuke-kun *For more details, please refer to the PDF document or feel free to contact us.*

• Data conversion software

We would like to introduce a case study of Sapporo Construction Industry Co., Ltd., which has implemented our finishing estimation software, Neo Finishing. The company has faced challenges in improving the efficiency of its estimation operations. Therefore, they tried our estimation and quotation creation software for about two months. As a result, we received the feedback, "During the loan period, we estimated multiple projects and truly realized that it is a very user-friendly and wonderful system." [Case Overview] ■ Client: Sapporo Construction Industry Co., Ltd. (Sapporo City, Hokkaido) ■ Employee Size: Less than 100 to 500 people ■ Software Implemented: Neo Finishing *For more details, please refer to the PDF document or feel free to contact us.

• Data conversion software

We would like to introduce a case study of Marushin Shitaka Construction Co., Ltd., which has implemented our architectural estimation software "Kensuke Neo." The company faced issues with their traditional in-house system, where re-proposals for estimates often resulted in delays. Therefore, they considered estimation software to efficiently create estimates. They are now fully operational with a network setup. By using "Kensuke Neo" from Advansha Co., Ltd., they have been able to respond quickly to re-proposal estimates and expressed their satisfaction with the results. **Case Overview** - Implementation Site: Marushin Shitaka Construction Co., Ltd. (Tateyama Town, Toyama Prefecture) - Employee Size: Less than 50-100 people - Implemented Software: Kensuke Neo By integrating with "NEO Finishing," PDF data can be converted to JW-CAD, allowing for easy extraction. The effort required for extraction has also been significantly reduced. *For more details, please refer to the PDF materials or feel free to contact us.*

• Data conversion software