藤倉コンポジット List of Products and Services

Fujikura Rubber's "Static Electricity Removal Adhesive Rubber Sheet" uses conductive unvulcanized butyl rubber as the adhesive layer, allowing it to be directly attached to insulated housing parts, effectively serving as a grounding wire. Additionally, due to the tackiness of the rubber, it is suitable for temporarily securing electronic components and similar items. 【Product Features】 ◆ Can be used without a grounding wire due to the conductive adhesive layer! ◆ Temporary fixation of electronic components and similar items is possible due to the tackiness of the rubber! *For more details, please download and view the catalog.

• Rubber

Our uniquely developed "Mochi Rubber" is a very soft new material with a hardness of 0° (JIS-A). It excels in strength and weather resistance, and compared to sponge rubber, it is less prone to thermal deformation and has excellent dimensional stability. Additionally, it can be formed not only into sheet shapes but also into three-dimensional shapes. For more details, please contact us or refer to our catalog. 【Applications】 ○ Sealing materials, packing, and gaskets for sealing products ○ Rubber rollers for office automation equipment ○ Vibration-damping materials, cushioning materials, and shock-absorbing materials for IT-related equipment

• Rubber

It is used for insulation and waterproof treatment of the connector parts of wires or cables, as well as for non-slip and repair purposes on tool grips, and for applications such as pipe joint materials. It has excellent weather resistance, heat resistance, and waterproofing, and can be installed in a small working space in a short time. For more details, please contact us or refer to the catalog.

• tube

The "Air Bearing Cylinder" is an air cylinder that employs air bearings in the rod guide section. Since there is no contact between the rod and the guide, there is no sliding resistance. This lack of resistance allows for soft-touch precision driving at micro-loads and low speeds. It can output to targeted values, making it suitable for applications that require precise load control, such as precision grinding machines. It is also compatible with clean room environments. 【Features】 ◆ By adopting air bearings (static pressure bearings) in the piston and rod guide sections, friction resistance is zero. ◆ The use of porous metal sintered air bearings achieves higher lateral rigidity compared to conventional products. ◆ Special adaptations are possible through free design. 【NEW】 ◆ Air Bearing Cylinder "Rotational Constraint Specification (Double Acting Type)" ◆ Air Bearing Cylinder "Copper Ion-Free Type" are also available for proposal.

• Pneumatic Equipment

For covers to prevent deformation due to high-speed rotation, CFRP molded products are optimal. By appropriately designing the lamination of CFRP, it is possible to create parts that suppress deformation caused by centrifugal loads and thermal expansion. 【Features】 ■ Miniaturization and high-speed rotation ■ Eddy current measures * For more details, please refer to the catalog or feel free to contact us.

• Other machine elements

High-quality, highly reliable CFRP products offered at an astonishingly low cost Fujikura Composite has started providing standard CFRP products for the aerospace and automotive industries. This product line, which balances high performance and low cost, brings new possibilities to the industrial sector. ■ Key Features Significant cost reduction through standardization Use of high-elasticity carbon fibers to meet steel pipe specifications Maintenance of high quality and reliability Customization options available ■ Cost Reduction Points Minimization of material loss Reduction of processing costs Improvement of production efficiency through standardization ■ Customization Options Polishing processing Hole processing Flange installation Other special processing ■ Applicable Fields Aircraft components Automotive parts Industrial machinery Robotics ■ Expected Effects Reduction of product costs Improvement of fuel efficiency through weight reduction Performance enhancement due to high strength and high rigidity Shortening of development cycles *For more details, please refer to the catalog or feel free to contact us.

• shaft

At Fujikura Rubber Industry, we provide comprehensive support from the design and manufacturing of CFRP products to product evaluation. In anisotropic materials, where strength and elasticity differ due to the direction of the inherent carbon fibers, the material properties have separate values for the fiber direction and the direction perpendicular to the fibers. Considering these properties, we design CFRP structures by orienting the fibers in any desired direction to achieve the required rigidity and strength. We offer proposals that include not only the simple replacement of steel materials with CFRP materials but also shape designs suitable for CFRP materials. 【Features】 ■ FEM simulation of orthotropic materials *For more details, please refer to our catalog or feel free to contact us.

• Contract manufacturing

An LED silicone rubber lens is a highly transparent silicone rubber lens designed for various applications such as office lighting, streetlights, automotive lighting, and facility lighting. It also achieves high reliability and reduced total costs through improved heat and light stability due to high brightness, extended lifespan, and enhanced weather resistance.

• Rubber

It is a rubber material endowed with excellent self-lubricating properties and wear resistance, capable of long-lasting low adhesion and low friction!

• Rubber

Our unique technology has made it possible to achieve integrated molding of CFRP and rubber. It allows for the rubber layer to be placed in the middle of CFRP laminates or for the outermost layer of CFRP to be covered with rubber. 【Features of Integrated Molded Products】 ■ No use of adhesives ■ Not affected by rubber elasticity ■ Low cost 【Expected Effects】 ■ Vibration damping ■ Sound insulation ■ Wear resistance ■ Protection against carbon fiber ejection during breakage *For more details, please refer to the catalog or feel free to contact us.

• Composite Materials

● We use a diaphragm instead of packing rubber. Since we produce in-house, we can change the rubber material according to customer requests. ● We offer cylinder diameters from φ10 to 200mm. ● We have both single-acting and double-acting (for φ25mm and above) available. ● Mounting brackets can be provided in L-shape, flange type, trunnion type, and pivot type. ● We can manufacture special products that meet customer specifications (starting from one lot). #BF Diaphragm Cylinder #BF Cylinder #Rolling Diaphragm Cylinder

• Pneumatic Equipment

The SC series incorporates linear ball bearings into the bearings, has the same dimensions and structure as the FC series, and maximizes the features of the BF diaphragm.

• Pneumatic Equipment

This is a BF cylinder with a JIS-compliant shape that incorporates the features of a BF diaphragm. It is possible to install an embedded sensor switch.

• Pneumatic Equipment

● We offer cylinder diameters of φ12, 20, 30, and 40 mm. ● It is designed to be space-saving. ● We can manufacture custom products tailored to customer specifications. We provide support from drawing creation.

• Pneumatic Equipment

● The unique structure allows for easy fine pressure adjustments. ● Due to its excellent relief sensitivity, high-precision pressure control is possible. ● We also offer models that support pressure adjustment via external signals.

• Pneumatic Equipment

● The unique structure allows for easy fine pressure adjustments. ● Due to its excellent relief sensitivity, high-precision pressure control is possible. ● With 5-phase stepping motor drive, the set pressure can be changed slightly and reliably with just one step of drive. By using microstepping drive, high-resolution settings with a pressure resolution of less than 0.1 kPa are possible.

• Pneumatic Equipment

● We offer a wide range of products from low pressure to high pressure. ● To prevent bleeding, air consumption can be reduced.

• Pneumatic Equipment

It is a well-balanced pressure reducing valve that has the pressure characteristics of a precision pressure reducing valve while being the size of a small pressure reducing valve.

• Pneumatic Equipment

● Compact yet excellent pressure characteristics and flow characteristics ● Can also accommodate manifold mounting.

• Pneumatic Equipment

With a width of 30mm and a height of 26mm up to the bonnet, it is very compact and weighs approximately 50g, making it ideal for installation in tight spaces and compact designs without worrying about weight.

• Pneumatic Equipment

● Due to the nozzle flapper mechanism, precise pressure control is possible. ● No power supply other than the input signal is required.

• Pneumatic Equipment

●Due to excellent pressure characteristics, the supply side's fluctuating set pressure remains stable. ●It has excellent resolution, allowing for high-precision negative pressure control.

• Pneumatic Equipment

●Compact and lightweight: (Outer diameter φ18, approximately 3g) ●Extremely low cracking pressure: Below 1kPa ●Minimal leakage: Below 1mL/min at 10kPa

• Pneumatic Equipment

● It is small and compact, allowing for space-saving installation. ● It achieves high precision relief pressure with a small difference in opening and closing pressure. ● As a special use, relief pressures other than the standard specifications can be set. (Setting range: 30 kPa to 300 kPa)

• Pneumatic Equipment

We would like to introduce an innovative product that achieves pressure adjustment and flow control in a single unit. This device allows for easy and precise flow adjustment through current control. It can continuously vary the flow rate according to the current value, and with minimal hysteresis, it enables smooth and accurate control. Additionally, it supports PWM control, allowing for integration with advanced control systems. Its design, integrated with a pressure reducing valve, mitigates the effects of primary pressure fluctuations, maintaining stable output. This product has a proven track record in devices where stable flow control is essential, such as oxygen concentrators, demonstrating its reliability. It is utilized in various fields requiring precise fluid control, including medical devices, industrial process control, and research and development equipment. By performing multiple functions in one unit, it also contributes to system simplification and cost reduction. Customization is available to meet your specific applications and requirements, so why not enhance the quality and efficiency of your products or processes with this product that combines stability, precision, and multifunctionality? For detailed specifications or inquiries about implementation, please feel free to contact us.

• Pneumatic Equipment

It is ideal for terminal processing of various types of electric cables (rubber and plastic power cables and communication cables), insulation treatment of connection parts, waterproof insulation treatment of insulated wire covers and clamp cover installation areas, and insulation treatment in areas where open flames are strictly prohibited. For use, please wrap it around while stretching it to about 1.5 times its length with approximately 1/2 overlap. For more details, please download the catalog or contact us.

• Other cable related products

This is a waterproof insulating tape that, despite its thick design, conforms well and excels in adhesion and waterproofing properties. It is ideal for insulating and waterproofing weak electrical wiring terminals and connections. Our company offers a wide range of industrial rubber tapes with excellent durability and reliability, based on the formulation and processing technologies we have developed over many years. These tapes are used in various fields, including insulation and waterproofing of power and communication cable connections and terminals, as well as corrosion protection for metals. Our achievements and quality, spanning over half a century, have received high praise both domestically and internationally. For more details, please download the catalog or contact us.

• Other cable related products

It can be used for insulation, waterproofing, and moisture-proofing of piping and low-voltage wiring sections. Due to its high adhesive strength, it has excellent waterproof properties. In particular, FC Tape No. 10 is ideal for insulation and waterproof protection of piping and wiring. For more details, please download the catalog or contact us.

• Other cable related products

It can be used for insulation, waterproofing, and moisture-proofing of piping and low-voltage wiring sections. Due to its high adhesive strength, it has excellent waterproof properties. In particular, FC Tape No. 14 has high adhesion, making it outstanding in waterproofing. For more details, please download the catalog or contact us.

• Other cable related products