KYONI CO.,LTD. Product Lineup

"Quest" is a deep groove ball bearing that explores high functionality and reliability. In recent years, there has been a trend towards higher speeds and temperatures in the industrial machinery sector as application performance improves. This bearing exhibits high robustness, allowing it to flexibly adapt to such environmental changes. The newly adopted heat-resistant nitrile rubber ensures sealing performance in higher temperature ranges. Improvements in base oil have enhanced its robustness for high-temperature applications. 【Features】 ■ High robustness that flexibly adapts to environmental changes ■ Standard adoption of heat-resistant seals ■ NACHI's unique high-performance grease ■ Enhanced high-temperature robustness through improvements in base oil ■ Approximately double grease lifespan confirmed under semi-high temperature conditions of 120°C ■ Compliant with European ELV and RoHS directives *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "EXQ" is a self-aligning roller bearing with high axial load resistance performance. By stabilizing the roller posture during rotation, it reduces the heat generation of the bearing and achieves one of the highest permissible rotational speeds in the world. Additionally, by optimizing internal specifications and using high-purity steel, it realizes a long service life. It comes standard with thermal stabilization treatment and can be used up to 200°C. We also offer the EXQ-V specification, which has high impact resistance performance. 【Features】 ■ Significantly improved axial load resistance performance ■ Achieves one of the highest permissible rotational speeds in the world ■ Realizes a long service life ■ Standard thermal stabilization treatment, usable up to 200°C ■ EXQ-V specification with significantly improved impact resistance of the retainer ■ Adopts a free guide ring that controls roller posture *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "TAF-X" is a high-load capacity ball screw support bearing that uses the largest possible steel balls within limited main dimensions. The contact angle has been changed to between 50 and 55 degrees, achieving a high axial dynamic load rating. The raceway shoulder diameter and raceway radius have been optimally designed to significantly increase the axial limit load. Additionally, by optimally designing the preload amount, the torque has reached a level comparable to conventional products. 【Features】 ■ Increased thrust load capacity ■ Increased axial limit load ■ High rigidity ■ Low torque ■ Sealed *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "TAB" is a high-durability ball screw support bearing with long life and high reliability. It adopts a triple lip structure, improving dust resistance and grease retention. It achieves energy savings through light contact. Additionally, it is strong against surface damage caused by impact loads and fretting, demonstrating excellent durability even in environments where foreign substances may enter. 【Features】 ■ Long life and high reliability (Multi-Tough specification) ■ Significant improvement in rolling life due to the adoption of special heat treatment ■ Improved dust resistance and grease retention with a triple lip structure ■ Achieves energy savings through light contact ■ Uses grease that is resistant to coolant intrusion and fretting ■ High rigidity is achieved by a contact angle of 60 degrees and an increased number of balls *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "EXS1" is a thrust self-aligning roller bearing that achieves a long lifespan through the use of high-purity steel. It realizes one of the world's highest permissible rotational speeds due to low temperature rise. Additionally, it is compatible for use not only in vertical axes but also in horizontal axes. By optimizing the holder's posture during operation, it minimizes temperature rise. In particular, the temperature rise during grease lubrication in horizontal axes is significantly reduced compared to conventional products. 【Features】 ■ Adoption of large diameter rollers achieves one of the world's largest high load capacities. ■ Long lifespan achieved through the use of high-purity steel. ■ One of the world's highest permissible rotational speeds achieved through low temperature rise. ■ Uniform stress distribution through optimized raceway curvature. ■ Compatible with operating temperatures up to 200°C. ■ Compatible for use in both vertical and horizontal axes. *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "Excel Series Angular Ball Bearing with Seal" is a product that utilizes the Excel seal, which has a proven track record in deep groove ball bearings. It enhances sealing performance and securely retains the enclosed grease, preventing the intrusion of foreign substances from the outside. This allows for maintenance-free operation, providing peace of mind during use. Pre-load adjustment (GM) has been performed in advance, so there is no need for troublesome adjustment work when assembling it into machinery, enabling a reduction in labor costs. 【Features】 ■ Sealed with a seal ■ Pre-greased ■ Energy-efficient ■ Easy assembly ■ Low noise *For more details, please download the PDF or feel free to contact us.

• Metal bearings

This document is a collection of case studies summarizing the cutting tool proposals for the automotive industry by Zhengzhou Diamond Precision Manufacturing Co., Ltd. It includes examples of processing EV motor end covers, EV motor cases, and steering components, among others. Each case study features work characteristics, processing conditions, tool features, and is accompanied by a wealth of images. 【Featured Case Studies (Partial)】 ■ EV Motor Case Processing Example - Lightweight Tool for EV Motor Cases ■ Brake Caliper Processing - PCD Total Form Cutter ■ Steering Knuckle Processing Example ■ CVJ Ball End Mill for Constant Velocity Joint Processing ■ Valve Body Processing Example - MF80 Series PCD Milling Cutter ■ Cylinder Head Processing Example - MF90 Series PCD Milling Cutter *For more details, please download the PDF or feel free to contact us.

• Other cutting tools

We would like to introduce the "Fine Injector" from Toyo Screen Manufacturing Co., Ltd., which we handle. The fusion of a 5μm ultra-fine slit "FineWedge" and vacuum control technology. It captures foreign substances in the coolant liquid, improving processing accuracy. Additionally, it reduces the filter replacement work and filter costs. The circulation of solid materials decreases, contributing to the extended lifespan of peripheral equipment. 【Features】 ■ Collects sludge with a minimum particle size of 5μm ■ Continuous filtration is possible, eliminating downtime for sludge discharge ■ High dewatering performance due to suction by negative pressure, reducing disposal costs for collected materials ■ Built-in backwash nozzle allows for continuous operation without clogging ■ Compact design allows for installation in narrow spaces *For more details, please download the PDF or feel free to contact us.

• Filtration Equipment

We would like to introduce the drum filter "Fine Wedge" from Toyo Screen Manufacturing Co., Ltd., which we handle. It eliminates the need for filter replacement, allowing for a reduction in running costs. The coolant liquid is clarified, extending the exchange period by 2 to 3 times. Additionally, even with a fine mesh size, it does not overflow from the tank. This prevents the outflow of chips into the clean tank, leading to improved product quality. Furthermore, it eliminates clogging of the circulation pump and backwash nozzle. 【Features】 ■ Eliminates the need for filter replacement, reducing running costs ■ Clarifies coolant liquid, extending the exchange period by 2 to 3 times ■ Does not overflow from the tank even with a fine mesh size ■ Prevents the outflow of chips into the clean tank, improving product quality ■ Eliminates clogging of the circulation pump and backwash nozzle *For more details, please download the PDF or feel free to contact us.

• Water treatment filters and consumables

This document introduces a case study of the overhaul of water treatment equipment by ShinMaywa Industries, Ltd. It explains the flow of factory maintenance (overhaul) including factory acceptance, disassembly, inspection and repair, assembly, completion of assembly, painting, performance testing, finalization, and delivery. To ensure the safe and long-term use of water treatment equipment such as submersible pumps, regular overhauls, in addition to daily inspections and maintenance, are essential. [Contents (partial)] - Cables - Motors - Ball bearings - Mechanical seals - Impellers - Pump casings *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

We would like to introduce the high-speed axial levitating turbo blower 'STX Series' from ShinMaywa Industries, Ltd., which we handle. The technology of air bearings (airfoil bearings) is combined with high-efficiency impellers and high-efficiency motors (PMSM). This contributes to reducing electricity costs and maintenance expenses associated with wastewater treatment. Additionally, it contributes to a decarbonized society by considering the environment through reductions in electricity consumption and CO2 emissions. 【Features】 ■ No lubrication oil is used, eliminating the need for oil-related auxiliary equipment ■ Non-contact rotation means no maintenance is required and has a long lifespan ■ No vibration and low noise ■ Radial bearings with high load capacity and excellent durability ■ Permanent magnet synchronous motor: PMSM ■ High efficiency across a wide range of rotational speeds *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

We would like to introduce the "ARH-EX Series" Roots Blower (Helical Type) from ShinMaywa Industries, which we handle. By adopting a 4-blade helical rotor, the thermal efficiency has increased by up to 50% compared to conventional models. It achieves both low noise and high efficiency. The installation dimensions are the same as those of conventional models, allowing for the replacement of the blower unit using the motor from the conventional model. 【Features】 ■ Improved thermal efficiency ■ Achieves low noise ■ Expanded pressure range ■ Good maintenance and reliability ■ Inverter control compatible for airflow adjustment ■ Replaceable with conventional models *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

This document introduces examples of wastewater treatment equipment handled by Kyoni Co., Ltd. It includes regular disassembly and maintenance of denitrification tank mixers and fans for thermal catalytic boilers, as well as regular inspections and maintenance of aeration blowers and submersible pumps for excess wastewater discharge. Our company has established a specialized team for water treatment and environmental equipment called the "Industrial Equipment Group," which comprehensively handles fluid equipment related to deodorization systems and piping materials, centered around pumps and blowers. [Contents (partial)] ■ Example of factory wastewater flow ■ Equipment installation work and repairs ■ Various handled products ■ Work example 01: Distillery denitrification tank mixer ■ Work example 02: Fan for thermal catalytic boiler at a recycling plant in Kanagawa Prefecture *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment
• Wastewater/wastewater treatment equipment

We would like to introduce the "Air-Cooled Dry Vacuum Pump" from Anlet Co., Ltd., which we handle. Since it does not use internal lubricants, there is no backflow of oil into the high vacuum side, allowing for a clean vacuum. Additionally, there is no oil mist dispersion on the discharge side, protecting the working environment and the health of the operators. It can operate from atmospheric pressure and maintains stable performance over a wide pressure range. 【Features】 ■ High efficiency and low noise with endless casing ■ Easy disassembly and internal inspection due to split casing ■ Low noise and low vibration thanks to the integrated rotor and shaft of the three-lobe Roots rotor ■ Long-term continuous operation is possible with no wear, making maintenance easy ■ Drain recovery of condensable gases is also possible ■ Simple structure with excellent durability *For more details, please download the PDF or feel free to contact us.

• Vacuum pump

We would like to introduce the "BO Type Blower" from Anlet Corporation, which we handle. It is used for aeration in water treatment facilities and factory wastewater treatment equipment, as well as for stirring sediments. In automotive parts factories, it is used for draining water, drying, and blowing away chips and debris. Compared to compressed air, it is expected to have energy-saving effects, and air blowing with a large-capacity Roots blower can also improve quality. [Applications and Examples of Use] ■ Water Treatment ■ Air Blowing ■ Oxygen Supply ■ Medical Baths ■ Transport of Powders and Granules ■ Special Gases *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

We would like to introduce the 'TM Series' end mills for titanium processing from Zhuzhou Tooling, which we handle. Titanium is known for being lightweight and strong, with high heat resistance and corrosion resistance, making it an excellent material. However, it is classified as a difficult-to-cut material, making processing challenging. Our product features a wavy cutting edge design that reduces the load on each cutting edge and allows heat to dissipate easily. Additionally, it has high bending strength, excellent chipping suppression, and is suitable for milling titanium alloy materials. 【Features】 - Adopts a unique wavy cutting edge, improving cutting performance compared to conventional shapes. - The front and rear cutting edges are polished, enhancing the surface finish of the tool, reducing wear, and lowering cutting force and cutting heat. - High bending strength and excellent chipping suppression make it suitable for milling titanium alloy materials. - Employs an unequal tooth structure to reduce cutting vibration and achieve stable processing. *For more details, please download the PDF or feel free to contact us.

• End Mills

The diamond-coated end mill 'DM Series' from Zhuzhou Tool, which we handle, is an end mill with diamond firmly adhered to a carbide material. It has extremely high wear resistance compared to general products, achieving a long lifespan. It is suitable for processing graphite, CERP, aluminum alloys, and composite materials. Thanks to its unique chip removal groove design, chip discharge is smoother, resulting in excellent surface quality. 【Features】 ■ CVD diamond coating ensures tool stability and longevity, enabling high-precision machining. ■ The unique chip removal groove design allows for smoother chip discharge, achieving excellent surface quality. ■ The special cutting edge design enhances tool strength and excellent sharpness, significantly improving tool lifespan. *For more details, please download the PDF or feel free to contact us.

• End Mills

We would like to introduce the "GMX Series" of unequal pitch and unequal lead end mills from Zhuzhou Tool, which we handle. This product suppresses chatter vibrations through its unequal pitch and unequal lead design, achieving smooth machining and reduced processing time. Additionally, it adopts a new AlCrN-based coating, allowing for machining of a wide range of materials including carbon steel, alloy steel, stainless steel, and FC/FCD. 【Features】 ■ High vibration suppression effect due to unequal pitch and unequal lead ■ Stable chip removal thanks to a uniquely designed flute shape ■ Long tool life achieved with the new AlCrN coating ■ Compatible with a wide range of work materials *For more details, please download the PDF (Chinese version) or feel free to contact us.

• End Mills

The power finisher 'TF-4H' from NACHI, which we handle, is a film wrap processing system that finishes the surface of shafts with high precision and efficiency. By adopting a through-feed method, workpieces can be sequentially fed in during processing. This achieves improved productivity and space-saving. Additionally, it is equipped with four standard processing heads that use polishing film. By sequentially changing the grit size of the film, high precision has been achieved. 【Features】 ■ High efficiency and compact processing system ■ Improved processing accuracy ■ Enhanced flexibility *For more details, please download the PDF or feel free to contact us.

• Other processing machines

We would like to introduce the "GTE Series" of screw grinding machines from NACHI, which we handle. This series offers high-precision machining through excellent mechanical technology and is capable of processing a variety of components such as ball screws, injection screws, and round dies. The "GTE-SA Series" includes two models with maximum center distances of 200mm and 400mm, achieving space-saving design. It is a production-type screw grinding machine suitable for mass production of small quantities of automotive parts and more. We also offer the "GTE-7A," which realizes high versatility and high precision. 【Features】 ■ Screw grinding machines that respond to various processing needs, including ball screws, injection screws, and round dies ■ High-precision machining through excellent mechanical technology ■ A series ranging from compact machines with a maximum center distance of 800mm to large machines up to 5,400mm ■ High-precision feeding and a drum-structured grinding wheel swivel base achieve high-precision machining and high work efficiency ■ Capable of accommodating various needs, including static pressure spindles and automation of the grinding wheel swivel base *For more details, please download the PDF or feel free to contact us.

• Grinding Machine

The Sky Baving Gear Shape Center 'GMS450' from NACHI, which we handle, is a process-integrated gear skiving machining machine. With its space-saving design, the Sky Baving Gear Shape Center transforms the gear machining line into a smart line, capable of accommodating various production forms from small-batch to mass production. Additionally, the interactive operation screen provides an excellent man-machine interface. 【Features】 ■ High-efficiency gear skiving machining reduces processing time by up to 1/5 (compared to gear shaping) ■ A unique technology that adds turning and drilling functions to the skiving machine, creating a gear composite machining machine ■ Supports not only small-batch production but also mass production *For more details, please download the PDF or feel free to contact us.

• Other processing machines

The "EDX" is a super compact multifunction digital control amplifier for electromagnetic proportional valves that can be mounted on proportional valves with a connector type. Through digital communication, it is possible to obtain pressure/flow/current, commands, and status (solenoid current, abnormalities). Additionally, it can be easily connected to a PC using a commercially available USB-C cable for USB power supply, allowing for simple parameter setting and writing without a power source. 【Features】 ■ Can be directly mounted on proportional valves ■ Space-saving ■ Dustproof and waterproof ■ Easy control with analog input ■ Compatible with ModbusRTU protocol *For more details, please download the PDF or feel free to contact us.

• Amplifier
• Hydraulic Equipment

We would like to introduce the "Bluetooth Wireless Communication Compatible Proportional Valve Mounted Digital Amplifier" from NACHI, which we handle. This product features a digital control amplifier built into a DIN connector, allowing for wiring via an M12 connector without opening the cover, and enabling configuration and adjustment through wireless communication. It allows for easy parameter checks on-site, and parameters can be adjusted and set with a feel similar to operating a volume control. 【Features】 ■ Compatible with Bluetooth wireless communication ■ Wiring via M12 connector ■ Can be directly mounted on proportional valves ■ Space-saving ■ Dustproof and waterproof *For more details, please download the PDF or feel free to contact us.

• Amplifier
• Hydraulic Equipment

The "Synchronous Motor Driven Energy-Saving Hydraulic Unit" from NACHI, which we handle, is an inverter-driven energy-saving variable pump unit that achieves excellent energy-saving performance through IPM motors, inverter control, and variable pumps. By improving the pump efficiency of conventional energy-saving units and incorporating IPM motors, it significantly reduces power consumption and further lowers electricity costs. Additionally, it is not subject to the high-efficiency standards for induction motors, and all models have the same dimensions, ensuring compatibility for installation and piping, eliminating the need for design changes for each machine. 【Features】 ■ Energy-saving performance ■ Increased responsiveness ■ Low noise: Equivalent to 54dB(A) during pressure holding ■ Low heat generation: Oil temperature rise of 5.0℃ above room temperature or less ■ Equipped with IPM ■ Equipped with inverter *For more details, please download the PDF or feel free to contact us.

• Other pumps
• Hydraulic Equipment

At Kyoni Co., Ltd., we offer proposals for assistive devices that support the lifting and turning movement of heavy objects. In addition to the Flex Arm, which can be installed in low-ceiling areas and covers a wide range of work areas, we also handle support arms with a maximum load capacity of 130 kg that can be used for workpiece loading on processing machines and roll replacement on packaging machines. Furthermore, we are open to considering requests not only for individual assistive devices but also for attachments, controllers, and movable carts, so please feel free to contact us. 【Proposed Products】 ■ Flex Arm (Model No.: FAW) ■ Support Arm (Model No.: SAW) ■ Inner and Outer Clamps ■ Vacuum ■ Carts and Anchors ■ Hooks *For more details, please download the PDF or feel free to contact us.

• Balancer
• Trolley

Are you having trouble with heavy material handling operations? The powerful arm will solve the problem of transporting heavy items from workstations to conveyors in tight assembly areas and during workpiece loading and unloading. The compact arm will alleviate the burden on your shoulders, arms, and wrists during tightening operations with tools such as air impacts and nut runners. Additionally, automation of image processing and equipment control is possible by using visual programming tools for image processing. [Proposal] ■ Heavy Material Handling - Powerful Arm (Model No.: PAW) ■ Tool-Using Operations - Compact Arm (Model No.: CAW) *For more details, please download the PDF or feel free to contact us.

• Balancer
• Image Processing Software

Are you troubled by the risk of disconnection? In the case of external wiring for robots, the risk of disconnection is significant, which can limit the robot's range of motion. By using uninterrupted wireless communication for control, you can eliminate external wiring for the robot and only require internal wiring for power, reducing the risk of disconnection and greatly increasing the robot's range of motion. Additionally, we offer proposals related to monitoring and visualizing air consumption, such as wanting to work towards carbon neutrality or easily checking the air consumption of each device. Please feel free to contact us if you have any requests. [Proposal Details] ■ Achieve "non-stop production equipment" with connected wireless ■ Energy-saving for production equipment through air reduction and visualization - Monitoring and visualization of air consumption - Minimizing air leaks - Optimal blowing with minimal air *For more details, please download the PDF or feel free to contact us.

• Network related equipment and software

The "CKD PAW" is a powerful arm that features an internal locking mechanism, allowing for safe use without the risk of pinching fingers. Whether in a single-axis or multi-axis configuration, it can be freely combined based on the customer's application and location. Additionally, while maintaining the space-saving, compact, and lightweight touch of traditional powerful arms, we have equipped it with a vertical axis to enhance usability in the palletizing process. 【Features】 ■ Arm variations tailored to the workpiece ■ Wider range of motion ■ Broad range of motion suited to usage ■ Position holding during power (air, electricity) downtime ■ Pinch prevention *For more details, please download the PDF or feel free to contact us.

• Balancer

The "CKD CAW" is a fixed compact arm that can be widely used during operation and folded compactly for storage. With an arm that moves flexibly in the horizontal direction, it allows for tightening work at the targeted position. The joint section is equipped with a simple locking mechanism. Additionally, compared to hanging types, it suppresses vibrations and reactive forces generated by tools. A check valve prevents rapid descent when air supply is stopped. 【Features】 ■ Compact ■ Variations tailored to the work - Size L: Up to 5kg - Size H: Up to 15kg ■ Multi-joint arm that moves freely *For more details, please download the PDF or feel free to contact us.

• Balancer

The "CKD FAW" is an air balancer with a rated load capacity of 50kg, designed for a wide range of operations and can be implemented in low ceiling areas. It contributes to work improvement even in narrow and low-ceilinged sites where the introduction of assistive devices had previously been given up. Additionally, an interlock mechanism is provided to prevent the unclamping and suction-off of heavy objects while being transported in the air. 【Features】 ■ Easy transportation of heavy objects ■ Wide range of motion ・Turning radius: 2.5m ・Vertical stroke: 1.5m ■ All-air specification *For more details, please download the PDF or feel free to contact us.

• Balancer

Attention those struggling with rising prices and costs of cutting tools! Kyoni started its import and sales business of top-class Chinese cutting tool manufacturers in 2015, and now over 2,000 companies in the Japanese market have adopted our tools, achieving cost reductions in tool expenses. This document is the latest collection of successful case studies for switching to Chinese-made cutting tools in Japan (2024 edition)! With rising prices from Japanese manufacturers, you may want to try Chinese tools but worry about their quality... If you want to introduce tools that maintain quality while keeping costs down... If you are facing such concerns, please take a look. You can download the document to see numerous processing examples of carbide (Zhuzhou Tool), PCD, and CBN tools (Zhengzhou Diamond, Beijing World Diamond). Kyoni and our dealers across Japan will fully support you in the adoption process, so feel free to contact us.

• Other cutting tools
• drill
• End Mills

XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, holding the number one market share in the small diameter field in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the MAIDA Group, which is backed by Chinese capital, after being under the IMC Group. The Sweep Cut Drill Series ranges from Φ0.3mm to 2mm and addresses the burr issues associated with through holes. 【Sweep Cut Drill Series】 - Lineup from Φ0.3mm to 2mm - Optimal for addressing burr issues in aluminum alloys, engineering plastics, aluminum, and plastic composites - Suitable for products with high hole position accuracy requirements

• drill

XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, holding the number one market share in China in the small diameter field. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the MAIDA Group, which is backed by Chinese capital, after being under the IMC Group. The end mill series ranges from Φ0.3mm to 4mm and can be customized. 【End Mill Series】 - Φ0.3mm to 4mm - Available in 2-flute and 3-flute options for steel machining, finishing, and non-ferrous metal machining.

• End Mills

XIATEC is a tool manufacturer specialized in small diameter, ultra-small diameter, and micro tools under 4mm, holding the number one market share in the small diameter field in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the Chinese capital MAIDA Group after being under the IMC Group. The step drill series ranges from Φ0.18mm and can be customized. 【Step Drill Series】 - Ranges from Φ0.18mm and customizable - Applicable materials: stainless steel, aluminum alloys, engineering plastics, and others

• drill

XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, holding the number one market share in the small diameter field in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the IMC Group and is currently operating as a member of the Chinese capital MAIDA Group. The chamfering cutter series offers a lineup of Φ0.3 to 4mm with 2-blade and 3-blade options. 【Thread Cutting Cutter Series】 - Available in 2-blade and 3-blade options from Φ0.3 to 4mm - Applicable materials: stainless steel, aluminum alloy, general steel materials - Burr-free - Capable of not only chamfering but also V-groove processing and countersinking.

• cutter

XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, and holds the number one market share in the small diameter field in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the IMC Group and is currently operating as a member of the Chinese capital MAIDA Group. The threading cutter series includes single and three-tooth options ranging from M0.8 to 5mm. 【Threading Cutter Series】 - Available in single and three-tooth configurations from M0.8 to 5mm, with options for special products - Applicable materials: stainless steel, aluminum alloys, alloy steel, carbon steel, titanium alloys, heat-resistant alloys

• cutter

XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, holding a top-level market share in the small diameter field in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it later became part of the IMC Group and is currently operating as a member of the China-based MAIDA Group. The micro drill series offers a lineup ranging from Φ0.03 to 0.09mm, tailored to different materials. 【Micro Drill Series】 - Standard lineup of Φ0.03 to 0.09mm, with options for special products - Applicable materials: machinable ceramics, engineering plastics (PEEK, PEI, PES), stainless steel, aluminum alloys

• drill

XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, and holds the number one market share in the small diameter sector in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it currently operates as part of the MAIDA group. The PCD drill series is suitable for machining fragile materials related to semiconductors, with a lineup ranging from D0.2 to 2.00mm. 【PCD Drill Series】 - Standard lineup from D 0.2 to 2.00mm - Custom production is also possible - Applicable materials: ceramics, silicon, quartz, alumina, aluminum nitride, and others - Examples of processed work: inspection probes, test sockets, shower plates, electrostatic chucks, etc.

• drill

XIATEC in Xiamen specializes in small diameter, ultra-small diameter, and micro tools with a diameter of 4mm or less, and holds a top-class market share in the small diameter field in China. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the MAIDA Group, which is backed by Chinese capital, after being under the IMC Group. The standard drill series for standard small diameter drills offers a lineup ranging from D0.4 to 4.00mm based on the type of material being machined.

• drill

XIATEC in Xiamen specializes in small diameter, ultra-small diameter, and micro tools with a diameter of 4mm or less, boasting a top-level market share in the small diameter field in China. The company was founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, and after being part of the IMC Group, it is now operating as a member of the Chinese capital MAIDA Group. It holds a top-level market share in PCB drills for printed circuit board processing and has significantly increased sales in ultra-hard small diameter tools ranging from 4mm to a minimum of 0.03, as well as PCD micro drills for semiconductor component processing. 【Product Range】 - Standard Drill Series D 0.4–4mm - Micro Drill Series D 0.03 and above * For machinable ceramics, engineering plastics, stainless steel, aluminum, and others - Sweep Cut Drill Series - Step Drill Series - PCD Drill Series D 0.2 and above - End Mill Series - Thread Cutting Cutter Series For inquiries about the company's products, please contact Kyoni Co., Ltd., which has been selling Chinese cutting tools in Japan for over 15 years!

• drill
• Other cutting tools
• End Mills

XIATEC in Xiamen specializes in small diameter, ultra-small diameter, and micro tools with a diameter of 4mm or less, boasting the No. 1 market share in China in the small diameter field. The company was founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, and after being part of the IMC Group, it is now operating as a member of the Chinese capital MAIDA Group. It holds a top-level market share in China for PCB drills used in printed circuit board processing and has significantly increased sales of ultra-hard small diameter tools ranging from 4mm to a minimum of 0.03, as well as PCD micro drills for semiconductor component processing. For inquiries about the company's products, please contact Kyoni Co., Ltd., which has been selling Chinese cutting tools in Japan for over 15 years!

• drill
• Other cutting tools
• End Mills

Until now, collaborative robots generally stopped when they came into contact with a person, which posed potential risks of injury depending on the robot's speed, its hands, and the workpiece being handled. As a result, there remain concerns about worker contact and constraints due to safety regulations within user environments, necessitating a high level of safety for the introduction and proliferation of collaborative robots. We are pleased to announce the "MZS05," a compact collaborative robot from NACHI that maintains the productivity of conventional models while incorporating sensors to detect human proximity and stop before a collision occurs. With significantly improved safety performance compared to traditional collaborative robots, the potential applications for these robots are undoubtedly expanding. We encourage you to consider this for your automation needs.

• Articulated Robot

1. Top-class 6-axis collaborative robot with high speed and high precision By utilizing a lightweight and highly rigid design developed through compact robot development, it achieves class-leading high speed and high precision as a collaborative robot. - Maximum speed: 1,000 mm/sec (collaborative mode) 3,000 mm/sec (non-collaborative mode) - Position repeatability: ±0.025 mm 2. Excellent safety and reliability Meets international safety standards*1, ensuring safety through shape design that minimizes pinch risks and multiple contact monitoring functions. Enables collaborative work between humans and robots without safety fences. *1 ISO 13849-1 ISO 10218-1 ISO/TS 15066 third-party certification obtained 3. Adaptable to diverse environments By adopting a hollow wrist structure, it eliminates the need for wiring and piping around the robot wrist, reducing the risk of interference with surrounding equipment. Additionally, it comes standard with dust and drip-proof performance (equivalent to IP67), making it suitable for environments where dust and water droplets are present.

• Articulated Robot
• Palletizer
• Food Conveyor Equipment

If the hydraulic equipment or oil coolers integrated into the factory's facilities are malfunctioning or have stopped working, and you don't know who to ask for help, please consult Kyoni Co., Ltd. We have a total of 20 qualified hydraulic specialists across the company and a rich network of repair contractors in various regions, allowing us to quickly handle repair work and updates. 【Service Areas】 Miyagi Prefecture, Yamagata Prefecture, Fukushima Prefecture Ibaraki Prefecture, Tochigi Prefecture, Gunma Prefecture, Saitama Prefecture, Chiba Prefecture, Tokyo, Kanagawa Prefecture, Yamanashi Prefecture, Nagano Prefecture Gifu Prefecture, Shizuoka Prefecture, Aichi Prefecture, Mie Prefecture, Shiga Prefecture *Other regions are negotiable. ● Example 1: Hydraulic Unit and Oil Cooler Replacement Work We can handle everything from the removal of the old hydraulic unit to the installation of a new one, including design, manufacturing, and trial operation! We can also handle oil coolers in the same way. We accept any requests related to hydraulic equipment and oil coolers. ● Example 2: Hydraulic Unit Maintenance Do you have hydraulic units that haven't been maintained? Leave the troublesome maintenance and judgment on replacement equipment to us! - Heat countermeasures: Cleaning and replacing radiators, fans, and water coolers - Deterioration of hydraulic oil: Oil leak countermeasures, oil seal replacement, tank cleaning, etc.

• Hydraulic Equipment

The NACHI low-power solenoid valve SE/SED series from Fujikoshi has achieved top-class performance with a maximum operating pressure, maximum flow rate, and allowable back pressure, all at 5W. It features an energy-saving design with terminal box/DIN connector wiring and M12-4 pin connector wiring, making it the lowest power solenoid valve at the highest level in NACHI's history. For quotes, detailed proposals, and replacement work, please leave it to Kyoni Co., Ltd., the top distributor of Fujikoshi hydraulic equipment! 【Features】 1: Energy Efficiency Achieving a maximum operating pressure of 16MPa, a maximum flow rate of 40L/min, and an allowable back pressure of 16MPa with a power consumption of 5W, it realizes further energy savings through reduced pressure loss. 2: Ease of Use Standardizing M12-4 pin connector wiring in addition to terminal box/DIN connector wiring allows for easy interfacing with open networks and reduces wiring labor through one-touch connection and disconnection. 3: Safety Standard surge protection prevents spark generation at relay contacts. The M12-4 pin connector specification is directly connected to the slave, with a diode built into the terminal box to prevent reverse voltage. 4: Compliance with International Safety Standards Compliance with European safety standards: CE marking obtained through TÜV certification. *Applicable only to the SE series.

• Hydraulic Equipment