サプリナ List of Products and Services

The machine is compatible with materials up to approximately 100mm in width, such as belts and ropes, and allows for automatic fixed-length cutting with easy operation. By replacing the knife, this machine can switch between heat cutting and cold cutting, making it suitable for various materials. It allows for detailed settings such as sheet count, feed speed, and knife speed, which can be adjusted according to the material, significantly improving work efficiency. With the optional loop unraveler, it can maintain a consistent tension, enabling continuous cutting with precise dimensional accuracy.

• others

● By equipping the cutting knife with a dust collection mechanism, it automatically cuts to a fixed length while inhaling the shavings generated during cutting. ● The cutting device is equipped with knives that have a super non-stick coating, allowing for precise cutting of adhesive materials as well. ● The vertical extension and retraction method achieves space-saving design. The main unit can be moved on casters, so it can be installed anywhere.

• others

The stack cutter, which is an automatic unwinding machine, is equipped with an automatic loop unwinding mechanism. By making it tension-free for highly elastic materials, it enables continuous cutting while maintaining dimensional accuracy. This machine uses a powerful cutting mechanism and can accurately cut various materials. The unwinding shaft is designed to allow for double-layer hanging, making it possible to efficiently transition to the next material.

• others

It can automatically cut agricultural and civil engineering materials to specified lengths. The maximum input length is 30 meters, and it can be fed out without wavering. For materials with large mesh sizes, uniform force can be applied with a tension bar, allowing for cutting along the mesh. It is possible to switch between stacked and non-stacked cutting according to the material being cut.

• others

The Stack Cutter is used not only in the sewing industry but also in the printing industry. When heavy raw materials are set in a bucket-type unwinding machine, they are automatically controlled for edge alignment and fed into the slitter. The raw materials cut to width by six slitters are automatically stacked to a fixed length using a stacking mechanism. The space-saving and automated Stack Cutter significantly improves work efficiency.

• Paper Converting Machinery

● The automatic sliding table allows anyone to use it safely. ● The knife's rotation speed is controlled by an inverter, enabling a wide range of settings to match the workpiece. ● When the table retracts, it automatically opens and closes to prevent contact between the knife and the workpiece. ● We will accommodate your requests regarding the table size.

• Filtration Filter

The design allows for automatic dropping of materials and stacking them in place. It can accommodate materials up to 600mm in size. Thanks to the unique fabric presser mechanism, it prevents the materials from shifting when stacking. For narrow materials, it is also possible to work with two pieces side by side at once.

• others

It is possible to automatically cut curtain fabric to the required length. Depending on the length, half-cutting of the fabric may be necessary, and automatic slit cutting will be performed based on the input values.

• others

- Continuous supply and sewing of materials can be performed from materials rolled up, allowing for winding back into rolls. - By directly sewing the raw material before cutting, it secures allowances and reduces the occurrence of sewing defects, eliminating the need for investment in sewing jigs tailored to the products. - You can consider various combinations of cutting, bonding, printing, etc., according to your customer's process.

• Interior parts

It is ideal for continuous processing of thick and irregularly shaped materials, as well as synchronized operation with extruders. By adopting a belt feeder, it is possible to achieve stable precision even with materials that are difficult to feed, such as thick, hard, slippery, and irregular shapes. Setting the material is as simple as clamping the upper belt section using a handle. This allows for a reduction in setup time and makes fine adjustments to the clamp easy. A half-cut (cutting stroke adjustment) mechanism can also be selected for the cutting method.

• fiber

We have designed the machine to accurately cut soft and elastic raw rubber material. The machine can operate independently, but it can also be linked to existing conveyor systems owned by customers, allowing the cutting process to be added to the unloading process. It is equipped with a powerful circular blade cutter that can handle the challenging raw rubber material. The circular blade cutter has a built-in sharpening device, ensuring that it maintains a sharp cutting edge at all times.

• Rubber Processing Machine

● There is no need to use paper tubes, and it can automatically wind to the set length in a semi-automatic manner. ● During automatic cutting, inexpensive Olfa blades are used. The V-shape allows for reciprocating cutting. ● By adjusting the guide position, it can also be used for single-width materials. ● If there is significant weight after winding, a lever-type unloading mechanism enables smooth unloading.

• fiber

- It is possible to easily perform the rewinding operation from heavy raw materials. - The operation is done via a touch panel. By setting the paper tube for rewinding, entering the desired length, and simply pressing the start button, anyone can easily carry out the rewinding operation. - By securing the paper tube with the moving guides on both sides, it is possible to rewind accurately. - This machine can adjust the winding speed according to the material, which can improve production efficiency.

• Other processing machines

● In addition to sheets, automatic feeding and cutting are widely possible with materials such as film and thick paper. The desktop models come in three types with effective cutting widths of 100mm, 300mm, and 350mm, and the 100mm model also includes a heat cut method. ● After setting the materials, you can easily operate the machine by simply setting the feed length and number of sheets on the LCD touch panel and pressing the start button. ● There is no need for troublesome clearance adjustments when replacing the blade, allowing for smooth operation, while also achieving lightweight and space-saving design.

• cutter

An electric width guide has been attached to the band knife. You can move the width guide using the switch box at hand. Automatic operation with pitch setting is also possible. Additionally, the cutter can be turned ON and OFF using the switch at hand. Cutting the material is done by pushing the table. The movement of the table is also smooth.

• Textile Processing Machinery

The table dimensions and the height of the guide can be custom designed. Both the table and the guide are made of aluminum, making them lightweight. The fabric is cut by manually moving the table back and forth. The cutting action is also light and smooth. There is a stopper for the fabric, allowing for easy straight cutting. Safety measures are well-equipped, including an adjustable knife cover and table stoppers that can be adjusted according to the height of the fabric.

• Textile Processing Machinery

It is a device that sends out materials at a fixed size and automatically cuts them. All dimensions—length, width, and height—are compact and space-saving. We can test whether the materials can be cut, so please feel free to contact us.

• Textile Processing Machinery

The unique arm that temporarily holds the dough allows you to release your hands when setting the dough. The winding speed can be adjusted with a volume control. By setting the winding length, it will automatically wind up. If you assist, you can also wrap tape around the dough after winding.

• Textile Processing Machinery

This is a device designed to cut materials such as thick and elastic filters. It automatically measures the length of the material with a manually movable sensor and cuts it with a circular blade. The cut material is transported to the next process via a conveyor.

• Textile Processing Machinery

It automatically measures the length of the rope and performs heat cutting. This prevents fraying at the cut edge due to melting. The temperature of the built-in heater can be adjusted according to the material, which improves work efficiency. Additionally, it is equipped with a mechanism to prevent re-welding.

• Textile Processing Machinery

You can cut the material spread on the floor by moving the cutting machine along with the cart.

• Textile Processing Machinery

This is a device that automatically unwinds and cuts thick and sturdy fabrics such as carpets and entrance mats. Fine adjustments can be made after automatic unwinding using a manual switch. By adopting an air table, the movement and rotation of the cut fabric can be performed smoothly. Equipping the cut line with a laser marker also enables pattern-matching cuts.

• Textile Processing Machinery

By setting the two numbers of the "NG dimension," which are the extension length of the original material and the dimensions of the seam, automatic cutting can be performed while removing the seam.

• Textile Processing Machinery

By raising the height of the stack cutter itself and combining it with the support cart, we have made it possible to perform long cuts with extended lengths.

• Textile Processing Machinery

The unique three-roll rewinding allows for no need for a raw material shaft, and the paper tube set can be easily rewound. In addition to operation via a liquid crystal panel, rewinding can also be performed using a foot switch, enabling work to be done while standing. It is compact and equipped with casters, allowing you to place it wherever you like for use.

• Textile Processing Machinery

The OSC-605 is a fully automatic device that slits and cuts mat-like Kevlar fibers to specified lengths. It is equipped with three slit cutters that can be easily repositioned with a single touch, and can also be retracted upwards when not in use. Designed to save space, it can be used even in narrow areas near walls, according to customer requirements. 【Features】 - Fully automatic slitting and length cutting of mat-like Kevlar fibers - The raw material is automatically aligned using an edge detection sensor (single edge reference) for unwinding - Equipped with three slit cutters - Knife re-sharpening is possible remotely via an LCD screen, thanks to an air-driven mechanism - Space-saving design allows use in narrow areas near walls *For more details, please refer to the PDF document or feel free to contact us.

• Bag making machine/slitter
• cutter
• Other machine elements

The "OGC-1040" is a device that automatically cuts mat-like glass fiber to a specified size. The raw material is securely fixed with an air shaft, and the appropriate amount is automatically unwound through loop sensor detection (it is also equipped with a raw material break sensor). Additionally, two patterns of work content can be registered on the LCD screen, and once the first setting is completed, the second setting operation starts automatically, significantly improving work efficiency. 【Features】 ■ Automatically cuts mat-like glass fiber to a specified size ■ Even difficult materials like glass mats can be cut to size instantly with a high-durability guillotine knife mechanism ■ Two patterns of work content can be registered on the LCD screen ■ Interactive operation with the LCD screen makes it easy for first-time users ■ Error details are automatically displayed in case of operational mistakes *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other machine elements

The "HP-B200C" is a device that cuts multiple bobbin-wound carbon fibers into fine chip shapes. It is a high-speed continuous cutting machine with a crank mechanism, and the overall length dimensions can be changed. The guillotine cutting mechanism features upper and lower blades made of special hard materials, allowing for instant cutting of the material. The bobbin holder can accommodate up to 30 bobbins, and a separation bar prevents tangling. [Features] - Cuts multiple bobbin-wound carbon fibers into fine chip shapes - High-speed continuous cutting machine with a crank mechanism, with adjustable overall length dimensions - Guillotine cutting mechanism with upper and lower blades made of special hard materials - Bobbin holder can accommodate up to 30 bobbins - Separation bar prevents tangling *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other machine elements

The "ASC-1500-LF" is a fully automatic device for unwinding, cutting to fixed dimensions, and stacking carbon fiber material sheets. The main body, equipped with a clamping mechanism, moves to transfer the material to the catcher mechanism, ensuring reliable unwinding operations (using a pulse motor). To prevent carbon fiber debris from causing electrical system failures, various dust-proof mechanisms are installed in the main components, and a highly safe, explosion-proof air motor is used in the cutter section. 【Features】 - Fully automatic unwinding, cutting to fixed dimensions, and stacking of carbon fiber material sheets - Reliable unwinding operations (using a pulse motor) - Various dust-proof mechanisms are installed in the main components - A highly safe, explosion-proof air motor is used in the cutter section - The hydraulic lift table automatically maintains a constant height with a lifting sensor, ensuring accurate unwinding dimensions and stacking precision *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "STC-1600S2" is a stack cutter with a slitter that allows for slit cutting to any width and fully automatic cutting to any length. At the same time, thanks to the newly developed stacking mechanism, it automatically stacks the specified number of sheets, making it space-saving (equipped with casters) and completely eliminating the need for an operator. It is ideal for cutting small lots of linings and sheets, as well as for material stacking as a pre-process for hydraulic pressing. 【Features】 - Capable of slit cutting to any width and fully automatic cutting to any length - Space-saving (equipped with casters) and completely eliminates the need for an operator - Three-stage cutter running speed tailored to the material - Enables work without cutting errors *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Bag making machine/slitter

The "OCF-1900" is a device that cuts soft materials, similar to non-woven fabric, into fixed dimensions and integrates them into packaging boxes and other applications. To prevent the material from getting caught on the cutting cutter rail, a shutter mechanism operates to open and close, while an air blowing mechanism removes wrinkles from the material, allowing for flawless feeding of the material. The cutter body features a scissors-like mechanism with a built-in ultra-hard fixed blade, ensuring precise cutting operations even with thin and soft materials (a knife sharpening device is also built-in). 【Features】 ■ Equipped with safety area sensors at both the front and rear of the device ■ Safety sensors are also installed at the opening and closing sections ■ In case of operational errors, an alarm screen is automatically displayed on the color LCD panel ■ The cutter operation has three-speed variations *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

At Saprina Co., Ltd., we handle the winding machine synchronized slitter 'SRS-2000'. We have manufactured only the necessary slitter units for a production line that automatically performs ear-aligned winding while slitting thick raw materials to a specified width (total of 3 machines). Since we use existing devices for the unwinding and ear-aligned winding, the investment cost is reduced. To ensure complete synchronization with the front and rear devices, the slitter's rotational speed and the feeding two-roller are automatically synchronized and variable through a speed displacement detector equipped on the winding device. 【Features】 ■ The slitter unit is movable as needed ■ The slitter has a split structure for the upper and lower blades ■ The upper blade can be raised and lowered manually using a handle device ■ Slitting can be started from the middle of the raw material ■ Equipped with a control panel switch for standalone operation (manual mode) *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "AKS-2500" is a device designed for linear cutting of large quantities of stacked paper, non-woven fabric, sponge, etc., all at once. The outer diameter of the spool winding device can be adjusted to match the total length of the material being unwound. The cutting material is wrapped around a high-speed rotating spool-shaped drum, which stops after the number of layers has been reached. A portion is then cut open, and the material is unwound (manually) to the cutting area, in conjunction with the spool winding device. The material is secured with a push button, and the rigid blade cutting machine automatically moves to cut the material. 【Features】 - The cutting machine body adopts a vertical blade cutting machine equipped with a servo motor (10-inch model). - Air-driven cutting misalignment prevention devices are installed on both sides of the cutting line. - The cutting machine body can adjust its speed according to the material being cut and automatically moves back and forth. - The top surface of the table is designed for operator walkability. - A dust collection device is also equipped to suck up cutting debris from below the table. *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce the "ASC-2200-OR," a curl material and slit fixed-length cutting device handled by Saprina Co., Ltd. Even with thick filter materials (up to 45mm) that curl excessively at the edges, accurate automatic length measurement cutting can be performed thanks to the adoption of a new mechanism. With a reciprocating knife cutting and automatic sharpening device, work efficiency is improved. The slitter allows for mid-way avoidance settings, ensuring that unused remaining raw materials are not slit processed, allowing for effective use of the remaining raw materials. 【Features】 ■ Equipped with electric slitter machines (4 units) ■ Simultaneous cutting of any slit width is possible ■ Includes reciprocating knife cutting and automatic sharpening device ■ Accurate automatic length measurement cutting ■ Slitter allows for mid-way avoidance settings *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

It is a high-safety automatic cutting machine because it does not operate unless the cut products are picked up!

• Textile Processing Machinery

We take pride in having been an essential player in the broad industry of "cutting" for 50 years. Since our founding in 1973, we have felt it our mission as a cutting equipment manufacturer to provide appropriate cutting-related equipment across various industries, with our products numbering in the hundreds. From handheld small cutting machines to custom-made products tailored to customer specifications, and cutting and rewinding production lines, please consult us for anything related to "unwinding," "slitting," "cutting," and "winding." 【Business Activities】 ■ Manufacturing of electric cutting machines for the sewing industry (SUPRENA brand) ■ Design, manufacturing, and sales of labor-saving equipment for various industries ■ Sales of energy-saving related products ■ General agency for KM brand cutting equipment in Western Japan ■ Export/import of sewing-related products *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

Automatically cut resilient materials such as urethane and sponge into fixed dimensions! The materials cut to fixed dimensions are automatically discharged via a conveyor! This eliminates the need for manual removal!

• Textile Processing Machinery

This is a customized model of our flagship device, the stack cutter, designed for customers in the bag industry. The cutter is equipped with a high-torque specification, allowing it to cut through hard materials such as school bags. To prevent marks on the cut material during the stacking process, we have installed cushions and sloped guides to protect the material from damage. Additionally, the unstacking section features a bucket unstacking mechanism, making it easy to set up even with heavy fabrics. Everything has been customized for customers in the bag industry.

• Textile Processing Machinery

This is a device that automatically processes V grooves (slits) in mattresses. By rotating the mattress on the table by 90 degrees, grid-like slit processing can also be performed. Additionally, safety fences are installed around the device, ensuring excellent safety.

• Textile Processing Machinery

This is a device that sends out quilting materials, etc., in fixed dimensions and cuts them using our company's mini cutter installed at the matching pattern position (the cutting is manual). It features a horizontal table and can be equipped with a laser marker as an option, allowing for quick and easy straight cutting. Additionally, this machine uses a bucket for the raw material set, making it easy to set up by simply placing the raw material without the hassle of threading it through a shaft.

• Textile Processing Machinery

It is a device that automatically unwinds corner rolls. Simply placing the raw material in the bucket completes the setup, eliminating the hassle of threading it onto the corner roll shaft. Handling heavy raw materials becomes easy for anyone.

• Textile Processing Machinery

While checking for any scratches on the surface of the material, it can automatically perform unwinding and rewinding. Furthermore, with the correction input settings, it can also unwind and rewind multiple types of raw materials with different properties using only this machine.

• Textile Processing Machinery

It is possible to automatically cut raw materials with a diameter of 600 mm and a weight of 500 kg in conjunction with an automatic cutting machine (CAM). The ear alignment mechanism allows for stable supply even if the roll condition of the raw material is poor.

• Textile Processing Machinery

By using the original core rod, it is possible to wind without a paper tube. This allows for efficient and smooth operations and shipping after winding. Simply input the winding length, and it will automatically wind and cut at the set length.

• Textile Processing Machinery

This is a device for rewinding adhesive tape from the release paper side facing outward to the material side facing outward. It is useful not only for rewinding regular adhesive tape but especially for rewinding butyl tape. It is recommended for customers in the construction and repair industries that handle butyl tape. Additionally, since it rewinds without a paper core, it makes the extraction of the rewound tape easy.

• Textile Processing Machinery
• Rubber Processing Machine