大電 List of Products and Services

★CC-Link IE TSN ClassB/A Certification Obtained 1G Dedicated Industrial Media Converter 'DN1400E'★ The 'DN1400E' is a 1G dedicated type industrial media converter. It is the first media converter to support CC-Link IE TSN ClassB. It supports the construction of high-speed motion control systems for customers with a low-latency network. It has high noise resistance compliant with JISC61000-6-2, achieving stable communication that is resistant to noise. Operating as a repeater, it transfers data with the shortest possible delay. ★Contact/Analog Signal/Ethernet Converter 'DN9400E'★ The 'DN9400E' is a device that transmits contact and analog signals over IP. It allows control of contact output based on the conditions set for contact input and analog input. By outputting via Ethernet, it also supports remote monitoring from a central monitoring room. It enables the construction of simple sequences without complex programming and can be used for controlling circuit breakers or as alarm contacts. Additionally, in support of Modbus TCP, remote monitoring is achieved with a control and monitoring app for the DN9400E!

• Converters and Transducers

The "DN2400E" is an industrial media converter dedicated to 100M. It is an industrial model with high environmental resistance and is compatible with DIN rails. It has high noise resistance in accordance with JISC61000-6-2, and operates as a repeater, enabling data transfer with the shortest delay. 【Features】 ■ 100M dedicated type media converter ■ Industrial model with high environmental resistance ■ High noise resistance in accordance with JISC61000-6-2 ■ Low-latency transmission through repeater operation ■ Available in board state ■ Board moisture-proof coating *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "DN9830E" is a serial-to-Ethernet converter that effectively utilizes the transmission path by converting serial signals into Ethernet frames. It enables the transmission of RS232C/RS422/RS485 serial signals as Ethernet frames (TCP/IP or UDP). 【Main Features】 ■ When using the Socket communication APP, serial signals can be controlled from a PC through the conversion between serial signals and Ethernet. ■ SNMP monitoring is possible by connecting the Ethernet port to an SNMP manager. ■ Parallel transmission and contact input synchronization By combining with a contact adapter, parallel signals can be transmitted as UDP Ethernet frames. In combination with a contact input adapter and a 2-port selector, it is also possible to switch the path of the 2-port selector in sync with the contact input status.

• Other FA equipment
• Other network tools

The "DN100GE Series" is a media converter specifically designed for 100G. It enables high-speed transmission at 100Gbps and can improve allowable loss by up to approximately 20dB through the use of booster amplifiers, allowing for long-distance transmission. Additionally, it features the ability to change the emission wavelength of our optical module (CFP2-ACO) to any wavelength from the management unit mounted on our media converter chassis (DNSHD8E series), enabling multiplex transmission of up to 8 lines. 【Features】 ■ Capable of high-speed transmission at 100Gbps ■ Long-distance transmission possible with amplifiers ■ Remote monitoring function to check operational and power status ■ Capable of multiplex transmission of up to 8 lines ■ Link status can be monitored remotely ■ Can accommodate up to 4 units in a 19-inch rack, 1U size *For more details, please refer to the PDF document or feel free to contact us. We are currently developing a new product for the 100G media converter. For more information, please feel free to contact us.

• converter

The "DN5161E Series" is an ALL Giga intelligent optical switching hub that supports PoE/PoE+/UPOE power supply and complies with the Ministry of Land, Infrastructure, Transport and Tourism's standard specifications Type D for the fiscal year 2020. It has over 20 years of implementation experience in Ministry of Land, Infrastructure, Transport and Tourism projects (dam monitoring and road monitoring). Additionally, it features a fiber bypass switch control connector, enabling more stable redundancy in conjunction with the fiber bypass switch (DNOSWE). Development from hardware to firmware is done in-house, and all manufacturing and sales bases are located in Japan, ensuring reliable support and quick response. 【Features】 ■ Supports PoE/PoE+/UPOE power supply ■ Operating temperature guarantee of -20℃ to 60℃, achieving excellent environmental durability with fanless design ■ Compatible with external storage devices ■ Can be mounted in a 19-inch rack *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• Switching Power Supply

The "DN9801E Series" is an RS485/optical cascade connection device that modulates DMX digital data in a unique way and converts it into optical signals. By utilizing optical fiber, the transmission distance can be extended up to a maximum of 2 km. The "pass-through function," which transfers the data received via the optical interface directly to the next stage, enables cascade connections, allowing for the control of lighting using DMX signals. 【Features】 ■ Guaranteed operation in environments ranging from -20°C to 65°C ■ Avoids issues caused by lightning and noise through the use of optical fiber ■ Well-suited for outdoor use, such as in stadiums *For detailed product specifications, please refer to the documentation. Feel free to contact us with any inquiries. ★ We plan to exhibit at trade shows. For more details, please see the basic information below. ★ We are currently conducting market research for lineup expansion, and we would love to hear your feedback.

• Communications
• Other network tools

The DN5423E is an industrial non-intelligent switching hub that supports SFP for optical ports. It accommodates dual power input, allowing for redundant power configurations. The surface of the circuit board is coated for moisture resistance. The port configuration includes 8 metal ports (10/100/1000M) and 2 optical ports (1000M-SFP), and it is compatible with DIN rails. You can view the specifications in the PDF available for download below. 【Features】 ■ SFP is used for optical ports ■ Moisture-resistant coating on the circuit board surface ■ Dual power supply support ■ DIN rail compatible *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• switch
• switch

The DN5412E is a non-intelligent switching hub equipped with five ports for transmitting and receiving signals compliant with 10/100/1000BASE-T over UTP cables. The surface of the circuit board is coated for moisture resistance, making it less susceptible to ESD and gas influences. All forwarding is processed by hardware, achieving full wire speed performance. 【Features】 ■ Bridge Type - Monitors transmitted and received data - Filters out unnecessary data to prevent relaying of irrelevant communications ■ Power Redundancy Support - Supports dual power input systems - Allows for redundant power input configurations ■ AC Adapter Support By using an optional AC adapter, operation with commercial power sources is possible. *When both DC power input and AC adapter are connected, the DC power input takes priority. ■ Available not only in a housing type but also in a board state Due to its compact size, it is also ideal for integration into devices. *For more details, please refer to the PDF document or feel free to contact us.

• switch
• Routers, Switches, and Hubs

This is an industrial non-intelligent switching hub equipped with 16 metal ports. ■ Port Configuration - DN5420E: Metal (10/100/1000M) × 16 - DN5422E: Metal (10/100/1000M) × 16, Optical (1000M) × 2 ■ Redundant Power Input Support It supports dual power input systems, allowing for a redundant power input configuration. ■ The surface of the circuit board is coated for moisture resistance. ■ DIN Rail Compatible For more details, please download the PDF or contact us.

• Other network tools
• Other FA equipment
• Routers, Switches, and Hubs

It enables the optical transmission of contact information over long distances. Up to 8 channels of contact input are transmitted via optical fiber and output as contact output. It is used in combination with an input device that converts contact signals into optical signals and an output device that restores optical signals back into contact signals. <Features> ■ Simple integrated structure With a simple structure that only combines input and output, contact information can be transmitted to remote locations. ■ High environmental resistance Operating temperature range is guaranteed from -10°C to 55°C. ■ Rich power supply compatibility The power supply supports a wide range of DC 12-24V. ■ AC adapter compatibility By using a separately sold AC adapter, operation with commercial power sources is also possible. * If both DC power and AC adapter are connected, DC power input takes priority. ■ Status monitoring By keeping any channel of the contact input in a constant short-circuit state, the contact output can continuously output a closed state, allowing for monitoring of the device's abnormal status.

• Other network tools

This is an industrial non-intelligent switching hub equipped with 16 metal ports. ■ Port Configuration - DN5420E: Metal (10/100/1000M) × 16 - DN5422E: Metal (10/100/1000M) × 16, Optical (1000M) × 2 ■ Redundant Power Input Support It supports dual power input systems, allowing for a redundant power input configuration. ■ The surface of the circuit board is coated for moisture resistance. ■ DIN Rail Compatible For more details, please download the PDF or contact us.

• Other network tools
• Other FA equipment
• Routers, Switches, and Hubs

The DN5411E is a non-intelligent switching hub equipped with four ports for transmitting and receiving signals compliant with 10/100/1000BASE-T over UTP cables. The surface of the circuit board is coated for moisture resistance, making it less susceptible to ESD and gas influences. All forwarding is processed by hardware, achieving full wire speed performance. Depending on the model number, you can choose to enable or disable the address learning function. The version without the address learning function (-LD) allows for network monitoring and packet capture. **Features** - Bridge Type - Monitors transmitted and received data - Filters out unnecessary data to prevent relaying of unwanted communications - Redundant Power Supply Support - Supports two power input systems - Allows for redundant power input configurations - Available not only as a chassis type but also in board state *For more details, please refer to the PDF materials or feel free to contact us.*

• Routers, Switches, and Hubs
• Switching Power Supply

The "DN9840E" is a converter that supports SFP and converts RS232c/RS422/RS485 serial signals into Ethernet frames. By using the conversion between serial signals and Ethernet frames, you can control serial signals from a PC. Additionally, it allows for SNMP monitoring of the media converter and this device, and when combined with a contact adapter, parallel (contact) transmission is possible. 【Features】 ■ Converts RS232c/RS422/RS485 serial signals into Ethernet frames ■ Supports SFP ■ Allows SNMP monitoring of the media converter and this device ■ Enables parallel (contact) transmission when combined with a contact adapter *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "DN2800E series" is a media converter specifically designed for 100M use. It has a wide operating temperature range and can be economically converted to optical. Additionally, as a repeater type, it can transmit regardless of packet length and can also transmit VLAN-tagged packets. Furthermore, it can be directly mounted into our media converter chassis (each series of DNHDxE), making it suitable for storage in a 19-inch rack or for fixing to a DIN rail, while featuring a compact design that is small and lightweight. 【Features】 ■ Media converter specifically designed for 100M use ■ Wide operating temperature range and economical optical conversion ■ As a repeater type, it can transmit regardless of packet length ■ Capable of transmitting VLAN-tagged packets ■ Compact design that is small and lightweight *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "DN5400E/5410E" is an industrial non-intelligent switching hub that supports DIN rail mounting, suitable for embedded applications. The "DN5400E" is compliant with 10/100BASE-TX, while the "DN5410E" is compliant with 10/100/1000BASE-T, each equipped with eight ports for sending and receiving signals over UTP cables. Additionally, it supports dual power input, allowing for redundancy in power input configurations. It is available not only in a housing type but also in a board state, making it suitable for embedded applications. 【Features】 ■ Excellent environmental resistance due to moisture-proof coating ■ Eight ports for sending and receiving signals over UTP cables ■ Data transmission between ports through Layer 2 switching ■ Full wire speed performance achieved as all forwarding is processed by hardware ■ Monitors incoming and outgoing data due to its bridge type ■ Filters out unnecessary data to prevent relaying of communications ■ CC-Link IE Field compatible (DN5410E-DC-12V) *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• Switching Power Supply

This is an adapter that extends the transmission distance of RS232C signals using UTP cables. <Features> ■ Maximum extension distance is approximately 1.2 km (speed at maximum length is below 9600 bps) ■ Optimized for data centers It enables long-distance transmission between console ports of network devices and console servers, which are commonly used in the data center market. ■ Wide guaranteed temperature range The operating temperature guarantee covers a wide range from -20 to 65°C.

• Other FA equipment
• Other network tools

The "DNIOAE series" is an adapter for contact input and output. By using it with rack options equipped with an SNMP unit (DNHD12E and DNHD6E), various contact-type sensors can be accommodated for contact input, enabling the IP conversion of contact states or notifications to contact outputs. Additionally, it is also possible to output the link status of the media converter mounted in the rack option as contact output. The contact I/O adapter "DNIOAE series" has three types of specifications: 1. Input module "DNIOAE-I" 2. Output module "DNIOAE-O" 3. I/O adapter "DNIOAE-A" 【We can meet such requests!】 - I want to convert contact information to Ethernet. - I want to output abnormalities of the media converter as contact output. *For more details, please feel free to contact us.

• Other network tools
• Other FA equipment

This is a DC voltage conversion adapter for using large electric network devices in a DC power environment. This adapter converts DC 12V, 24V, 48V, 100V, and 120V to DC 3.3V, which is the operating voltage of our compact media converter.

• Other network tools
• Other FA equipment

This product can accommodate two small media converter units. The power supply supports AC 100-120V, DC 12/24V, and 100/120V.

• Other FA equipment

This product can accommodate one compact media converter and a separately sold contact output adapter (DNCOAE). The power supply supports AC 100-120V, DV 12/24V, and 100/120V.

• Other FA equipment

This product is a converter for RS422/485 signals to optical signals. It can be used for wiring with optical fiber as a countermeasure against noise in FA applications and as protection against lightning in outdoor wiring.

• Other FA equipment
• Other network tools

It is an RS232C signal ⇔ optical converter. By utilizing optical fiber, it enables long-distance transmission. It can be used for noise countermeasures in FA applications and lightning protection in outdoor wiring with optical fiber. <Features> ■ Extension of RS232C signal transmission distance Optical transmission of up to 40 km is possible. Please select the optimal model according to the transmission distance. ■ Wiring using optical fiber ・Noise countermeasures for FA applications ・Lightning protection for outdoor wiring <Applications> ・RS232C signals are affected by noise, causing malfunctions. ・The standard length is insufficient for connecting RS232C ports. ・I want to transmit 232C signals outdoors but am afraid of lightning.

• Other FA equipment
• LAN construction and wiring work