レックス List of Products and Services

By directly inserting the sensor into the soil, measurements can be taken in about 3 seconds. Since it has a built-in logger, it is also effective for measuring changes over time. With the sensor switching function, customers can adjust the sensor length. The lightweight and compact design of the main unit makes it convenient to carry. It comes with dedicated software, allowing for data management on a computer.

• Soil testing
• Other environmental equipment
• Other environmental analysis equipment

To prevent accidents caused by the detachment of mortar or tiles from concrete surfaces, the injection of epoxy resin and similar materials into the peeling areas has gained attention in recent years. If the moisture content of the concrete surface or mortar at the injection site is high, the expected adhesive strength cannot be achieved. Therefore, this device was developed for the purpose of measuring moisture in these areas based on the "Public-Private Joint Research on the Development of Repair and Renovation Technologies for Exterior Materials" by the Ministry of Construction's Building Research Institute.

• Coating thickness gauge

The operation involves setting the correction dials for tree species, specific gravity, thickness, and temperature in advance, and then simply pressing it against the surface of the wood. The built-in microcomputer automatically performs correction calculations and determines the moisture value. With a measurement range of 2 to 150%, it can be used for moisture measurement of various types of wood and plywood. Additionally, it is equipped with an alarm setting function that sounds a buzzer when measuring wood with moisture content above the set level. It also supports sorting by moisture standards and finishing inspections. Furthermore, the HM-520 has passed the evaluation tests of the Japan Housing and Wood Technology Center, earning high trust.

• Coating thickness gauge

The drying section of the FD-720 is equipped with newly developed high heat capacity (200W×2) medium wavelength infrared quartz heaters. Additionally, it features a variety of measurement modes, including a "rapid drying mode," allowing measurements under drying conditions suitable for the drying characteristics of the sample being tested.

• Coating thickness gauge

The moisture value can be adjusted between -9.9% and +9.9% to match the management conditions, making it suitable for actual circumstances. The MT-900 is a higher model than the conventional MT-700, equipped with new calibration curves named "broadleaf" and "coniferous." By using these calibration curves, it can cover a wide measurement range from low moisture to high moisture, specifically 6-80% for broadleaf and 7-80% for coniferous. Additionally, it is possible to call up the 16 conventional species-specific calibration curves. Furthermore, it is equipped with a printer output terminal, allowing connection to an optional printer to retain measurement data.

• Coating thickness gauge

The HX-300 simply inserts a needle-like sensor into the tatami surface or tatami base to display moisture content (%). The occurrence of mites in tatami is largely influenced by the moisture condition of the tatami base and the temperature. Excess moisture in the tatami base can also lead to mold and decay. In recent years, various building materials, including rice straw mats, have been used for tatami bases. This device can measure the moisture content of tatami surfaces, rice straw mats, and tatami boards (wood-based board building materials), especially where moisture management is required by JIS and JAS standards.

• Coating thickness gauge

You can save data to an SD card and easily analyze and edit the data on a PC.

• Other measurement, recording and measuring instruments
• Thermo-hygrometer

The FD-800 adopts a dual temperature sensor method to achieve high-precision moisture measurement. In addition to measuring the environmental temperature in the drying chamber with a thermistor, it is equipped with a non-contact infrared thermometer to directly measure the sample temperature. While complementing the shortcomings of the thermistor, it allows for the setting of optimal heating and drying conditions tailored to the characteristics of the sample.

• Coating thickness gauge

The moisture value can be adjusted between -9.9% and +9.9% to match the management conditions, making it suitable for actual circumstances. The MT-700 is a wood moisture meter that employs the electrical resistance method and has been widely used for a long time. Wood takes a considerable amount of time to dry. If processing or construction is done while the wood is still insufficiently dried, it can lead to warping or cracking later on. As seen in historical buildings, wood can be an excellent material with a lifespan of several hundred years, provided that proper construction methods and management are followed. It is particularly suitable for climates like ours, which are hot and humid, as the wood itself responds to changes in humidity, making it a living material. Whether wood is utilized effectively or not depends on proper moisture management, which is essential.

• Coating thickness gauge

Moisture measurement can be performed on kraft paper, liner paper, and copy paper. Additionally, the HK-300 series offers three types depending on the measurement target and application: HK-300-1 with grip sensor, HK-300-2 with conductive rubber sensor, and HK-300-3 with constant pressure sensor.

• Coating thickness gauge

Moisture measurement can be performed on kraft paper, liner paper, and copy paper. Additionally, the HK-300 series offers three models based on the measurement target and application: - HK-300-1 with grip sensor, - HK-300-2 with conductive rubber sensor, - HK-300-3 with constant pressure sensor.

• Coating thickness gauge

You can measure the moisture content of copy paper and cardboard base paper. Additionally, the HK-300 series offers three models depending on the measurement target and application: HK-300-1 with grip sensor, HK-300-2 with conductive rubber sensor, and HK-300-3 with constant pressure sensor.

• Coating thickness gauge

The HI-300/300J is a concrete moisture meter that allows for easy measurement of moisture content and unit water volume by simply placing wet screened concrete (mortar) into a sample container and pressing the measurement key. It also enables output of management documents via a printer. The HI-300J is officially adopted by JR East in their "Standard Specifications for Civil Engineering Works."

• Coating thickness gauge

The Elnix 8500 Premium is a compact thickness gauge designed for measuring thick film coatings and curved surfaces. The probe is detachable, allowing for smooth measurements in hard-to-reach narrow areas or when pressing the probe at various angles. When using a wireless probe, it operates in dual mode, enabling coating measurements on both magnetic and non-magnetic metals. It is also equipped with various functions that are convenient for thickness measurement.

• Coating thickness gauge

The Elnix 8500 is a compact thickness gauge designed for measuring thick coatings and curved surfaces. The probe is detachable, allowing for smooth measurements in hard-to-reach narrow areas or when pressing the probe at various angles. Additionally, when using a wireless probe, it operates in dual mode, enabling coating measurements on both magnetic and non-magnetic metals. It is also equipped with various features that are convenient for thickness measurement.

• Coating thickness gauge

LE-373 is a thickness gauge that measures the thickness of coatings such as plating (excluding electrolytic nickel plating) and paint on magnetic materials. It can transfer data to printers and computers and is equipped with 16 functions including calibration curve memory, measurement data memory, upper and lower limit settings, and statistical processing. There are also plenty of options available, such as printers, measurement stands, and external output cables.

• Coating thickness gauge

The additional features are similar to the LE-373, allowing for data transfer to printers and computers, as well as simple statistical processing such as measurement counts, averages, maximum and minimum values, and standard deviations.

• Coating thickness gauge

The automatic substrate identification function that automatically recognizes the underlying metal, along with the two backlit LCD displays on the front and top, features an ergonomic design that allows for easy reading of measurement values from any measurement position.

• Coating thickness gauge

■Features - Dual-type thickness gauge that can measure both ferrous and non-ferrous substrates - Automatically identifies the substrate and switches to the appropriate measurement mode - Stores up to 16 calibrated applications (calibration curves) with 8 types each for electromagnetic and eddy current methods - Capable of outputting measurement data to a computer or printer - Equipped with various functions such as application memory (calibration curves), measurement data memory, data deletion, data output, lot classification, automatic power ON/OFF function, clock function, upper and lower limit settings, statistical calculations, backlight function, unit settings, and more.

• Coating thickness gauge

The patented BOD-BART testing method is a system developed in collaboration with manufacturers, universities, and local governments (wastewater treatment plants) that allows for the quick and easy measurement of BOD (biochemical oxygen demand) values. Traditional BOD testing methods require a period of five days to determine the BOD value, necessitating the dilution of the test water, aeration, and the specialized knowledge of technicians, along with a long preparation time for measurements. Additionally, the need for dissolved oxygen meters and various equipment makes the measurement costly and complicates the process of easily measuring BOD values. The BOD-BART testing method only requires placing 15 ml of test water into the BOD-BART and incubating it, allowing anyone to easily and economically measure BOD values in a short amount of time.

• Water quality testing
• Soil testing
• Other measurement, recording and measuring instruments

The LE-373 electromagnetic film thickness gauge and the LH-373 eddy current film thickness gauge both have dual functions, making it an optimal thickness gauge for field use that handles a variety of materials and coatings.

• Coating thickness gauge

This is a portable type of film thickness gauge with a built-in printer. It quickly and accurately measures the thickness of coatings (excluding electroplated nickel) such as plating, painting, and lining applied to magnetic metals without damaging the coating. Furthermore, the measurement results can be printed out on the spot.

• Coating thickness gauge

It is a film thickness gauge with a built-in printer that allows for quick and accurate measurements without damaging the insulating coating on non-magnetic metals, and it can print out the measurement results on the spot. It is equipped with convenient features such as statistical calculations, calibration memory, and limit settings.

• Coating thickness gauge

It is also used as a means to prepare soil specimens for CBR tests, unconfined compression tests, and others.

• Other inspection equipment and devices
• Other environmental analysis equipment

The temperature data logger TV-1 is a 1-channel temperature profiler system with a memory capacity of 16,383 memories per channel. It is capable of measuring temperature at short intervals. Additionally, it automatically records the internal temperature of the TV-1 unit itself (1 external channel and 1 internal channel). *The use of this device requires the optional analysis software and USB communication cable. If you are using it for the first time, please purchase the optional analysis software and USB communication cable together.

• Other environmental analysis equipment
• Thermometer
• Temperature and humidity measuring instruments

Due to the distance coefficient of 50:1, it is possible to measure the temperature of distant locations and small objects. The temperature can be measured instantly without touching the object being measured. It features a backlight that allows temperature readings in dark environments, making it an ideal infrared radiation thermometer for measuring temperatures in heating furnaces, incinerators, air conditioning systems, electrical circuits, engines, tires, and heating/cooling devices.

• Other environmental analysis equipment
• Thermometer
• Other temperature and humidity measuring instruments

The wide windscreen section with excellent usability features a space-saving design with a two-stage sliding door that does not protrude backward even when fully opened. *Two types are available, XFR-225W and XFR-224, due to differences in double range and minimum display. Please choose one.

• Weight related measuring instruments
• Scale

This is a high-precision electronic balance equipped with a tuning fork type force sensor, capable of widely accommodating various applications. In addition to weight mode, it features count mode and percent mode, and allows for selection in carat and momme units. *Please select one from the capacities of 820g/1200g.

• Weight related measuring instruments
• Scale

This is a high-performance, high-precision electronic balance that has further evolved with tuning fork sensor technology. In addition to weight mode, it is equipped with counting mode and percentage mode, and allows selection in carat and momme units. *Please select one type from the capacities of 220g, 420g, or 620g.

• Weight related measuring instruments
• Scale

This is a high-precision electronic balance equipped with a tuning fork-type force sensor, widely compatible with various applications. In addition to weight mode, it features count mode and percent mode, and allows selection in carat and momme units. *Please select one from the following capacities: 2200g/4200g/6200g/8200g/12kg.

• Weight related measuring instruments
• Scale

A stainless steel case (SUS304) that is resistant to rust and corrosion, equipped with a large LCD with a backlight and an auto-off function. This is a high-precision electronic scale that can also be used as a counting scale. Please choose from the weighing capacities of 2200g, 3200g, 6200g, 8200g, or 15Kg.

• Weight related measuring instruments
• Scale

A stainless steel case (SUS304) that is resistant to rust and corrosion, equipped with a large LCD with a backlight and an auto-off function. This is a high-precision electronic scale that can also be used as a counting scale. You can choose from capacities of 220g, 320g, 620g, or 820g.

• Weight related measuring instruments
• Scale

By measuring the intensity of sunlight while simultaneously measuring voltage and current with a multimeter, it is easy to evaluate solar panels. This solar power meter is ideal for checking the power generation when installing solar panels and for regular maintenance of solar panels.

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment
• Environmental Test Equipment

The intensity of sunlight is measured at 0.25-second intervals and displayed digitally on a large screen. It features hold and maximum/minimum value memory functions.

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment
• Environmental Test Equipment

The intensity of sunlight is measured at 0.25-second intervals and displayed digitally on a large screen. It has a hold function and memory for maximum and minimum values.

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment
• Environmental Test Equipment

It is a super compact and lightweight device measuring 50 X 22mm with a thickness of 10mm, and it has a fully waterproof structure compliant with IP67 standards. It can measure up to 2,730 memories. The battery life is long (approximately 10 years or 3 million measurements), so there is no need to worry about the hassle of replacement.

• Thermometer
• Temperature and humidity measuring instruments
• Other environmental equipment

A high-precision electronic balance that can also be used as a counting scale, featuring a stainless steel case (SUS304) resistant to rust and corrosion, and equipped with a large LCD with a backlight and an auto-off function.

• Weight related measuring instruments
• Scale

The temperature data logger TV-1 is a 1-channel temperature profiler system with a memory capacity of 16,383 memories per channel. It is capable of measuring temperature at short intervals. Additionally, the internal temperature of the temperature data logger TV-1 itself is automatically recorded (1 external channel and 1 internal channel).

• Thermometer
• Other environmental equipment
• Temperature and humidity measuring instruments

The SD-140 features an integrated temperature sensor and temperature memory unit, making it suitable for temperature measurement in transport heating chambers. It has a memory capacity of 15,000 entries, allowing for extensive and long-term temperature measurements. The temperature sensor uses a high-precision thermistor equivalent to the EN ISO 285:2006 standard (Point 6.2.1.1) for sterilization and disinfection devices, achieving a resolution of 0.04°C and a temperature accuracy of ±0.25°C. The main body is made of stainless steel SUS 316, which is highly resistant to acids and alkalis and does not rust. Additionally, it has a completely waterproof structure that meets IP68 standards and is rated for 10 bar pressure. *Please note that the use of this device requires the optional analysis software and USB communication cable. If you are using it for the first time, please purchase the optional analysis software and interface together.

• Thermometer
• Other environmental equipment
• Temperature and humidity measuring instruments

The distance coefficient is 12:1, so it is possible to measure the temperature of small objects without touching them, allowing for instant temperature measurement. It also has a backlight function, so you can check the measured temperature even in dark places.

• Other environmental analysis equipment
• Thermometer
• Other temperature and humidity measuring instruments

The measured temperature is displayed on an easy-to-read LCD with a backlight, showing temperatures in 0.1°C increments (ranging from -9.9 to +199.9°C). The non-contact temperature can have its emissivity adjusted between 0.01 and 1.00 to match the measured object, and the distance coefficient is 11:1 to ensure accurate measurements of distant objects. It can display the maximum temperature, minimum temperature, the deviation between the maximum and minimum temperatures, and the average value during measurement. For food factories, we can also deliver the Raytemp set, which includes a piercing temperature sensor and probe disinfecting wipes (70 pieces) in a hard case. *Please choose either the Raytemp (with a 1m bare wire sensor) or the RayTemp set (with a piercing temperature sensor, probe disinfecting wipes (70 pieces), and a hard case) from the options below.*

• Other environmental analysis equipment
• Thermometer
• Other temperature and humidity measuring instruments

Hydrogen explosion-proof ExiaCT4X, powerful suction of 0.75/min or more. *Please select whether or not gas alarm is required from the options below: With gas alarm function (TypeO2 L) Without gas alarm function (TypeO2 N) With gas alarm function inspection item (TypeO2 L) *For marine use Without gas alarm function inspection item (TypeO2 N) *For marine use

• Other measurement, recording and measuring instruments

This is the first portable gas monitor in the country that supports a hydrogen sulfide alarm setting value of 1 ppm (in accordance with ACGIH TWA 1 ppm). Please select the type of gas from combustible gases, oxygen, hydrogen sulfide, and carbon monoxide.

• Other measurement, recording and measuring instruments

This is a portable gas monitor for measuring flammable gases using a pump suction method. *Please select one from hydrocarbons, methane, or hydrogen based on the type of gas.

• Other measurement, recording and measuring instruments

The SC-01 is equipped with alarm functions that include a buzzer sound, lamp, and vibration, and it can continuously measure for approximately 250 hours. By using the optional remote cable, remote measurement is also possible. Additionally, a data logger function (optional) is available for use. With its inherently safe explosion-proof structure and standard shock-resistant protective rubber, it is ideal for various work sites. *Please select one type from A/B/C/D/E/F/G based on the type of gas. *Only one type of gas can be detected.

• Other measurement, recording and measuring instruments