レックス List of Products and Services

The detection unit has a two-range switchable wide and spot mode.

• Water quality testing
• Other physicochemical equipment

It is ideal for storage cases for small precision instruments and samples. The inner urethane has a soft wave shape that holds the products in place.

• Racks and Cases

It is ideal for storage cases for small precision instruments and samples. The inner urethane has a soft wave shape that holds the products in place.

• Racks and Cases

It is ideal for storage cases for small precision instruments and samples. The urethane inside has a soft wave shape that holds the products in place.

• Racks and Cases

The noLab Multi 9310 is a model that can measure multiple parameters compatible with digital electrodes, allowing for the measurement of pH, conductivity, and DO by swapping out the electrodes.

• Other physicochemical equipment
• Testing Equipment and Devices

It is a bright and sharp telescope. All models have a waterproof structure equivalent to IP55, protecting the body from sudden rain and dust at the site. The shortest focusing distance is just 30 cm, allowing for work even in tight spaces.

• Level gauges and level switches

Green has a higher relative sensitivity compared to red, and its visibility is outstanding. It uses a green laser that is approximately five times brighter than a red laser (according to internal manufacturer comparisons). This device is rated IP66 for water and dust resistance and is designed to withstand seismic activity, making it ideal for harsh working environments.

• Distance measuring device

The main body is designed with a dustproof and waterproof structure rated IP54, while the camera to cable section is rated IP67. It supports MicroSD cards (optional). It can capture still images and videos with sound, and with the push of a button, the display can rotate 180° and zoom.

• Industrial Endoscope

High precision ±0.3mm/10m, compact design that is small and lightweight.

• Distance measuring device

The minimum reading unit from 0 to 9.99° is 0.01°. You can perform a zero reset at any angle, making it convenient for comparative measurements. Additionally, you can also fix the displayed value.

• Other measurement, recording and measuring instruments

This is a hygrometer that can perform efficient measurements with a responsive sensor. It features a large, bright LED display, making it easy to read and convenient.

• Thermometer
• Thermo-hygrometer

The display is a large, bright LED screen.

• Wind Speed/Volume Meter

Due to the thermal method, a slight wind speed can be measured. *Please note that this product requires adjustment in combination with the main unit when replacing the sensor (considered a repair). An additional adjustment fee will be required on top of the price of the sensor probe alone.

• Wind Speed/Volume Meter

With the telescopic sensor probe, high-altitude measurements can be taken immediately.

• Thermometer
• Thermo-hygrometer

You can use it widely for building air conditioning, clean room management, and indoor environment measurement. *The VSM-20 main unit alone cannot perform measurements. Customers who do not have the main unit should purchase the probe as a set with the main unit.

• Other environmental analysis equipment

Equipped with various measurement modes such as MAX/MIN value display and data hold function, it is a very user-friendly ultraviolet intensity meter.

• Ultraviolet irradiation equipment

It is ideal for measuring vibrations of machinery and equipment.

• Noise Inspection

It is ideal for measuring vibrations of machinery and equipment.

• Noise Inspection

We adopted a vibration sensor and a magnetic base probe with a magnetic base.

• Noise Inspection

SD cards are compatible from 1G to 16G. You can edit data simply by importing the SD card to your PC.

• Noise Inspection

It is convenient to carry due to its compact size. The reduction in research and development costs due to savings on raw materials and sample disposal costs, as well as cost reductions expected from sample savings in lot inspections of incoming raw materials and products. Please select one type from the options below using the sensor: - For low viscosity (HA01-01) 0.2 – 100 mPa.s - For medium viscosity (HB02-01) 80 – 5,000 mPa.s - For high viscosity (HC02-01) 400 – 20,000 mPa.s

• Viscometer

Please select one type from the options below based on the type of sensor. - For low viscosity (HA01-01) 0.2 ～ 100mPa.s - For medium viscosity (HB02-01) 80 ～ 5,000mPa.s - For high viscosity (HC02-01) 400 ～ 20,000mPa.s

• Viscometer

All displays are compatible with Japanese, and viscosity measurements can be performed easily by simply selecting the spindle number and rotation speed.

• Viscometer

The main unit has a waterproof structure that complies with IP65 standards, allowing for wind speed measurements outdoors even in bad weather conditions. The AM-4220 features a memory function for recording minimum and maximum values, along with the ability to store 100 measurement data points. The wind speed display can be changed to m/s, km/h, knots, mph, or ft/min. It comes delivered in a carrying case along with the main unit, operation manual, and batteries.

• Wind Speed/Volume Meter

The wind speed detection unit is separated, making it ideal for managing wind speed in air conditioning and heating systems. The measurements are displayed digitally on a large screen. The wind speed display can be changed to knots, km/h, m/s, or ft/min.

• Wind Speed/Volume Meter

The vane-type wind speed probe uses ultra-low friction bearings, allowing it to measure even gentle breezes. The DT-619 makes it easy to input duct cross-sectional areas for airflow measurement, automatically calculating and displaying the airflow directly on the screen. It can store the duct cross-sectional areas for up to 8 locations to measure airflow in different places. Additionally, it displays the average wind speed and average airflow for 20 measurements. Wind speed can be switched between m/s, km/h, knots, feet/min, and mph. It features maximum/minimum wind speed and temperature memory, a hold function, and a backlight for measuring wind speed in dark conditions, making it a multifunctional device. The DT-619 comes with a pre-installed protector for shock protection. We offer this multifunctional anemometer/airflow meter at a low price. The DT-619 is delivered with the main unit, one battery, and a Japanese operation manual in a soft carrying case.

• Wind Speed/Volume Meter

It is compact and pocket-sized, making it ideal for use on job sites. The temperature can be measured over a wide range by using not only the internal temperature sensor but also by attaching a K-type thermocouple sensor. The illuminance measurement unit can be switched between Lux and foot-candles. Similarly, the wind speed measurement unit can be switched between ft/min, km/h, mile/h, and knots.

• Other environmental analysis equipment

The irradiation direction can be freely adjusted on the stand.

• Laser marker

It instantly transfers ink dots upward. The stand can slide left and right. It is equipped with a powerful magnet at the back of the stand, which demonstrates its strength during the assembly of steel frames, etc.

• Laser marker

It is a lightweight handheld digital oxygen meter weighing only 194g.

• Other measurement, recording and measuring instruments

It is the optimal tool for system maintenance inspections and for educational purposes.

• oscilloscope
• Electrical Instruments/Electrometers
• Other electric meters

60MHz, 2 phenomena, full color, and handheld type.

• oscilloscope
• Electrical Instruments/Electrometers
• Other electric meters

- Not only the display LCD but also the operation buttons are backlit, providing excellent operability even in dark environments. - This is an all-in-one oscilloscope equipped with a 4000-count true RMS digital multimeter function.

• oscilloscope
• Electrical Instruments/Electrometers
• Other electric meters

The T1-T2 temperature difference can be displayed, and temperatures from four points can be shown simultaneously. It has a data logger function that allows for data recording (dedicated software is included as standard). *Two K-type thermocouple sensors are included as standard.

• Thermometer

This is the first anemometer that can be used by bending the vane-type wind speed probe in all directions. Since the probe can be bent, it can be oriented to the optimal position according to the wind direction. Additionally, by bending the probe, it can also accommodate measurements in locations where wind speed measurement was previously difficult.

• Wind Speed/Volume Meter

- It also supports the measurement of light wind speed. - The wind speed can be displayed in m/s, km/h, or knots.

• Wind Speed/Volume Meter

Wind speed can be displayed in five types: m/s, km/h, knots, mph, and ft/min. The DT-8880 can transfer real-time data of wind speed, air volume, and temperature to a computer at one-second intervals using the analysis software and USB cable included in the set. The measured data can be displayed in graphs over time. The recorded data can be saved simultaneously in two formats: *.csv and *.txt.

• Wind Speed/Volume Meter

The DT-8920 can transfer wind speed or air volume measurements, as well as differential pressure and temperature data, to a computer in real-time using the analysis software and USB cable included in the set.

• Wind Speed/Volume Meter

CENTER 326 is compliant with international standards ANSI S1.4-1984 and IEC 60942-2003 Class 2, and is compatible with various sound level meters and measuring instruments.

• Noise Inspection

This is a noise meter that complies with IEC 651 TYPE II standards. You can set the measurement interval between 1 second and 59 seconds, and it can automatically record noise levels and measurement dates. The recorded data can be downloaded to a computer using the included analysis software and RS232C cable. In real-time mode, you can set the measurement interval to 0.1, 0.2, 1, 2, 5, 10, 20, or 30 seconds, allowing you to capture the time and noise data in real-time on your computer during measurement.

• Noise Inspection

It features a data logger function capable of recording up to 32,600 memory entries. You can set the measurement interval between 1 second and 59 seconds to automatically record noise levels and measurement dates. The recorded data can be downloaded to a computer using the included USB cable, and the accompanying analysis software allows for the analysis of the measurement data. In real-time mode, you can set the measurement interval to 0.1, 0.2, 0.5, 1, 1.5, 2, 2.5, 3, 5, or 10 seconds, enabling real-time capture of the measurement time and noise level data on a computer during measurement. Since the measurement data can also be saved in Excel or Text file formats, it is ideal for data analysis and interpretation.

• Noise Inspection

The noise data being measured can be continuously transferred to a computer using the included analysis software and USB cable. The measurement interval can be set to 0.1, 0.2, 0.5, 1, 1.5, 2, 2.5, 3, 5, or 10 seconds, allowing for the measurement of up to 20,000 noise level data points along with the measurement time. The measurement data can also be saved in Excel or Text file formats, making it ideal for data analysis and processing.

• Noise Inspection

This is a noise calibrator that generates accurate noise signals (94 dB and 114 dB) to verify whether the sound level meter is functioning properly. The usage is very simple: slide the range switch to set the desired noise level (94 dB or 114 dB). The SC-5 will immediately emit a constant noise signal once the switch is turned on. If the display level of the sound level meter is not within the accuracy range of 94 dB or 114 dB, refer to the operating manual of the sound level meter to adjust the displayed value. Selling price/tax included: ¥21,000

• Noise Inspection

This measurement method uses the same reaction conditions for pollutants and potassium permanganate as JIS K 0102, and the volumes of the sample and reagents are conducted at one-twentieth of the JIS method. Heating at 100°C for 30 minutes is performed using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter instead of using titration, displaying the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurement values obtained by the JIS method and those obtained using the photoLab 6100.

• Nitrogen Gas Generator
• Food environmental hygiene/contamination prevention equipment

It has a CO2 alarm that can be set, and it will sound a buzzer to warn you if the measured value exceeds the set alarm level. It can measure temperature and humidity, and it features data hold (DH), maximum (Max)/minimum (Min) display functions, making it a user-friendly device.

• Other environmental analysis equipment