ブライト List of Products and Services

RST Series Built-in PFC (Power Factor Correction) RST-5000 24V 48V RST-10000 24V 36V 48V Computers, Communications, Measurement, FA, Semiconductors Products that are out of stock can also be imported from Taiwan, starting from one unit. For more details, please contact us or download the catalog.

• LED lighting

EcoSystem is the name of Lutron's entirely new lighting control protocol. 【Features】 ○ Individual Addressing Each EcoSystem-compatible LED driver is assigned an address, allowing for independent control of each lighting fixture equipped with this driver. ○ Flexible Grouping Without Rewiring Since each lighting fixture equipped with an EcoSystem driver has its own individual address, grouping and regrouping can be set up without rewiring. This allows for flexible adaptation to layout changes. ○ Easy Setup Eliminates complicated programming using computers or other devices. All settings, including synchronization of devices and address settings for lighting fixtures, can be done with simple button operations on the main unit. ○ Simple and Easy Wiring In the event of a driver replacement, the address information from the old driver is automatically transferred to the new driver. There is no need for reprogramming. ○ Automatic Programming Function During Driver Replacement There is no need for reprogramming. For more details, please contact us or download the catalog.

• LED lighting

EcoSystem is the name of Lutron's entirely new lighting control protocol. 【Features】 ○ Individual Address Each EcoSystem-compatible LED driver is assigned an address, allowing for independent control of each lighting fixture equipped with this driver. ○ Flexible Grouping Without Rewiring Since each lighting fixture with an EcoSystem driver has its own individual address, grouping and regrouping can be set without rewiring. It can also flexibly accommodate layout changes. ○ Easy Setup Eliminates the need for complicated programming using computers or other devices. All settings, including synchronization of devices and address settings for lighting fixtures, can be done with simple button operations on the main unit. ○ Simple and Easy Wiring In the event of a driver replacement, the address information from the old driver is automatically transferred to the new driver. There is no need for reprogramming. ○ Automatic Programming Function During Driver Replacement There is no need for reprogramming. For more details, please contact us or download the catalog.

• LED lighting

The Bright straight tube LED fluorescent lamp for indoor lighting is a domestically produced, high-brightness, and high-efficiency LED fluorescent light. Since LED fluorescents do not use harmful substances like mercury, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is significantly reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as it does not use harmful substances like mercury → The aluminum and polycarbonate used are recyclable ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about five times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to traditional fluorescent lamps' lifespan of about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements ■ G13/GX16t-5 (JEL801) base ● For more details, please contact us or download the catalog.

• LED lighting

The Reshipu constant current power supply IP44 is an LED power supply for use within fixtures. It supports a wide input voltage of AC100/200V and is compatible with both 50/60Hz. Thanks to circuit technology, it achieves high efficiency and high power factor with minimal power loss. It meets safety standards as a PSE-certified DC power supply device. 【Features】 ○ High efficiency, high power factor ○ Minimal power loss ○ Wide input voltage ○ PSE certified ○ Meets safety standards For more details, please contact us or download the catalog.

• power supply

Easily simulate the benefits of switching from your current lighting to LED lighting, such as reducing electricity costs, CO2 emissions, and running costs.

• LED Module

The Bright Compact Fluorescent Lamp for indoor lighting is a domestically produced LED fluorescent lamp with high brightness and high efficiency. Since LED fluorescents do not use harmful substances like mercury, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is significantly reduced. 【Features】 ■ Same shape as compact fluorescent lamps → Can be installed in existing lighting fixtures as it has the same shape as conventional compact fluorescent lamps (FPL/FHP type). ■ Energy-saving, long lifespan, high quality → Utilizes high-performance LEDs to achieve energy savings and a long lifespan (40,000 hours) while maintaining high color rendering (Ra85). → The aluminum and polycarbonate used are recyclable. ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube. → The risk of injury from shattering is low even if dropped. ■ Proven and reliable domestic production → LED fluorescent lamps are produced in domestic factories. High performance and quality, as well as custom solutions for a wide range of demands. For more details, please contact us or download the catalog.

• LED lighting

The "Bright LED Fluorescent Light (Drip-proof Type)" is a domestically produced (by Elebam) high-brightness, high-efficiency LED fluorescent light for signage. It features a drip-proof design with waterproof gaskets at both ends, making it suitable for outdoor signs (inside fixtures). The body is made of polycarbonate, making it lightweight and resistant to breakage, which makes installation easier compared to conventional products, and there is no worry about it falling out during earthquakes. It has a long lifespan of approximately 40,000 hours, significantly reducing lamp replacement costs. We offer two types of products: the standard type with an LED irradiation angle of 150° (internal LED board) and the wide irradiation angle type with an LED irradiation angle of 225° (internal LED board). 【Features】 ■ Extremely bright LED fluorescent light for signage! ■ For energy-saving priorities, we also offer a FL40W type with a power consumption of 19W. ■ The body is made of polycarbonate → Resistant to breakage and lightweight → No worry about falling out during earthquakes ■ Reduces electricity costs by about half and contributes to CO2 reduction. For more details, please contact us or download the catalog.

• LED lighting

【Features】 ○ Delivery time is approximately 2 weeks; can be manufactured from one piece. ○ Indoor use / suitable for under eaves LED light panel products. ○ Power adapter type (CE, KC, PSE, UL certified); built-in power supply type available. ○ Light source and materials: LED + aluminum frame + power adapter. ○ Easy image replacement. ○ Also suitable for inspection lighting. ○ Thickness: Single-sided: 18mm / 20mm / 22mm / 25mm / 35mm / 42mm; Double-sided: 26mm / 42mm. ○ Please inquire about your desired "size," "brightness (illuminance) or light entry method (two lights on the long side, two lights on the short side, one light on the long side, one light on the short side, etc.), and thickness." ○ We also support the creation of light guide plates only or the sale of LED bars only. We provide cutting-edge LED products carefully selected based on the technical evaluation by Bright Co., Ltd. The products listed are manufactured through in-house development and carefully selected based on the technical evaluation by Bright Co., Ltd. We prioritize safety, design, performance, quality, and price to supply products that will satisfy you. For more details, please contact us or download the catalog.

• Other FA equipment

【Features】 ○ Delivery time approximately 2 weeks, can be manufactured from one piece ○ Indoor use / under eaves LED light panel products ○ Power adapter type (CE, KC, PSE, UL certified) Built-in power supply type available ○ Light source and materials: LED + aluminum frame + power adapter ○ Easy image replacement ○ Also suitable for inspection lighting ○ Thickness: Single-sided: 18mm/20mm/22mm/25mm/35mm/42mm Double-sided: 26mm/42mm ○ Please inquire about your desired "size," "brightness (illuminance) or light entry method (two lights on the long side, two lights on the short side, one light on the long side, one light on the short side, etc.), and thickness." ○ We also support the creation of light guide plates only and the sale of LED bars only. We provide cutting-edge LED products carefully selected based on the technical evaluation by Bright Co., Ltd. The products listed are manufactured through in-house development and are carefully selected based on the technical evaluation by Bright Co., Ltd. We prioritize safety, design, performance, quality, and price to supply products that will satisfy you. For more details, please contact us or download the catalog.

• Other FA equipment

Japanese-made LED line fixture LED bar light 【Features】 ○ Slim, lightweight, and high-brightness lighting ○ Made in Japan ○ Overcomes heat. Designed for long life and high reliability ○ DC24V ○ PWM dimming compatible ○ Easy installation ○ Custom specifications available ○ OEM support available For more details, please contact us or download the catalog.

• LED Module

MeanWell AC/DC power supply from a Taiwanese power supply manufacturer. <Features> The CQB100-110S and CHB150-110S series are suitable for railway applications. The CQB100-110S and CHB150-110S series offer output power of 100-150W in a quarter-brick size and half-brick package footprint. The CQB100-110S and CHB150-110S series have Input: 66-160Vdc, single input Output voltage range: 5V, 12V, 24VDC single output. Standard features include high remote on/off, maximum efficiency of 92%, 2250Vdc I/O isolation, and protections such as OVP/OCP/OTP and short-circuit protection. All models are RoHS compliant, carry the CE mark, and meet safety standards UL60950-1, EN60950-1, and IEC60950-1. For more details, please contact us below or download the catalog.

• power supply

Taiwanese power supply specialist CINCON AC/DC complies with medical standard EN60601-1 (3rd edition). <Features> Manufacturer: Cincon Product Category: Switching Power Supply RoHS: RoHS Certified Details Open Frame/Closed: Open Frame Rated Output Power: 40 W Input Voltage: 90 VAC to 264 VAC Number of Outputs: 1 Output Output Voltage - Channel 1: 3.3V/5V/9V/12V/15V/24V/30V/36V/48V Commercial/Medical: Medical Mounting Style: Chassis Approval: EN60601-1 Brand: Cincon Series: CFM40M Unit Weight: 90 g For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist CINCON AC/DC complies with medical standard EN60601-1 (3rd edition). Medical equipment <Features> Product Category: Switching Power Supply RoHS: RoHS Certified Details Open Frame/Closed: Open Frame Rated Output Power: 20 W Input Voltage: 90 VAC to 264 VAC Number of Outputs: 1 Output Output Voltage - Channel 1: 3.3V/5V/9V/12V/15V/24V Commercial/Medical: Medical Mounting Style: Chassis Approval: EN60601-1 Brand: Cincon Series: CFM21 Unit Weight: 105 g (-E) 55g (-S) For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist CINCON AC/DC conforms to medical standard EN60601-1 (3rd edition). <Features> Manufacturer: Cincon Product Category: Switching Power Supply RoHS: RoHS Certified Details Open Frame/Closed: Open Frame Rated Output Power: 60 W Input Voltage: 90 VAC to 264 VAC Number of Outputs: 1 Output Output Voltage - Channel 1: 5V/12V/15V/24V/48V Commercial/Medical: Medical Mounting Style: Chassis Approval: EN60601-1 Brand: Cincon Series: CFM60M Unit Weight: 125 g For more details, please contact us below or download the catalog.

• LED lighting

Taiwan power supply specialist manufacturer CINCON AC/DC complies with medical standard EN60601-1 (3rd edition). <Features> Manufacturer: Cincon Product Category: Switching Power Supply RoHS: RoHS Certified Details Open Frame/Closed: Open Frame Rated Output Power: 100W Input Voltage: 90 VAC to 264 VAC Number of Outputs: 1 Output Output Voltage - Channel 1: 5V/7.5V/9V/12V/15V/18V/24V/28V/36V/48V Commercial/Medical: Medical Mounting Style: Chassis Approval: EN60601-1 Brand: Cincon Series: CFM60M For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist CINCON AC/DC complies with medical standard EN60601-1 (3rd edition). <Features> Manufacturer: Cincon Product Category: Switching Power Supply RoHS: RoHS Certified Details Open Frame/Closed: Open Frame Rated Output Power: 150W Input Voltage: 90 VAC to 264 VAC Number of Outputs: 1 Output Output Voltage - Channel 1: 12 V/24V/36V/48V Commercial/Medical: Medical Mounting Style: Chassis Approval: EN60601-1 Brand: Cincon Series: CFM150M For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist CINCON AC/DC complies with medical standard EN60601-1 (3rd edition). <Features> Manufacturer: Cincon Product Category: Switching Power Supply RoHS: RoHS Certified Details Open Frame/Closed: Open Frame Rated Output Power: 150W Input Voltage: 90 VAC to 264 VAC Number of Outputs: 1 Output Output Voltage - Channel 1: 12 V/24V/36V/48V Commercial/Medical: Medical Mounting Style: Chassis Approval: EN60601-1 Brand: Cincon Series: CFM150M For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist manufacturer CINCON AC/DC power supply medical standard EN60601-1 (3rd edition) EN55011 Class “B” PSE compliant. <Features> Manufacturer: Cincon Product Category: AC Adapters RoHS: RoHS certified details Field: Universal Mounting Style: Wall, Interchangeable Plug Input Voltage Range: 90 VAC to 264 VAC Number of Outputs: 1 Rated Output Power: 15 W Output Voltage - Channel 1: 5 V 12V 15V 24V Output Current - Channel 1: 2 A 1.1A 1.0A 625mA DC Output Connector: 2.1 mm Barrel Plug AC Plug Included Approval: EN60601-1, UL60601-1 Brand: Cincon Commercial/Medical: Medical Efficiency: Level V For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist manufacturer CINCON AC/DC power supply medical standard EN60601-1 (3rd edition) EN55011 Class “B” PSE compliant. <Features> Manufacturer: Cincon Product Category: AC Adapters RoHS: RoHS Certified Details Area: Universal Mounting Style: Wall, Interchangeable Plug Input Voltage Range: 90 VAC to 264 VAC Number of Outputs: 1 Rated Output Power: 30 W Output Voltage - Channel 1: 5 V, 9 V, 12 V, 15 V, 18 V, 24 V Output Current - Channel 1: 4 A, 3.0 A, 2.5 A, 2.0 A, 1.67 A, 1.25 A DC Output Connector: 2.1 mm Barrel Plug AC Plug Included Approval: EN60601-1, UL60601-1 Brand: Cincon Commercial/Medical: Medical DC Output Cable Length: 1.8 m Efficiency: Level V For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist manufacturer CINCON AC/DC power supply medical standard EN60601-1 (3rd edition) EN55011 Class "B" PSE compliant. <Features> Manufacturer: Cincon Product Category: AC Adapters RoHS: RoHS certified details Field: Universal Mounting Style: Wall, Interchangeable Plug Input Voltage Range: 90 VAC to 264 VAC Number of Outputs: 1 Rated Output Power: 30 W Output Voltage - Channel 1: 5 V, 9 V, 12 V, 15 V, 18 V, 24 V Output Current - Channel 1: 4 A, 3.0 A, 2.5 A, 2.0 A, 1.67 A, 1.25 A DC Output Connector: 2.1 mm Barrel Plug AC Plug Included Approval: EN60601-1, UL60601-1 Brand: Cincon Commercial/Medical: Medical DC Output Cable Length: 1.8 m Efficiency: Level V For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist manufacturer CINCON AC/DC power supply medical standard EN60601-1 (3rd edition) EN55011 Class "B" PSE compliant. <Features> Manufacturer: Cincon Product Category: AC Adapters RoHS: RoHS Certification Details Area: Universal Mounting Style: Wall, Interchangeable Plug Input Voltage Range: 90 VAC to 264 VAC Number of Outputs: 1 Rated Output Power: 60 W Output Voltage: 5 V, 12 V, 15 V, 18 V, 19 V, 24 V, 36 V, 48 V Output Current: 6A, 5A, 4A, 3.33A, 3.15A, 2.5A, 1.66A, 1.25A DC Output Connector: 2.1 mm Barrel Plug AC Plug Included Approval: EN60601-1, UL60601-1 Brand: Cincon Commercial/Medical: Medical DC Output Cable Length: 1.8 m Efficiency: Level V For more details, please contact us below or download the catalog.

• LED lighting

Taiwanese power supply specialist manufacturer CINCON AC/DC power supply medical standard EN60601-1 (3rd edition) EN55011 Class “B” PSE compliant. <Features> Manufacturer: Cincon Product Category: AC Adapters RoHS: RoHS certified details Field: Universal Mounting Style: Wall, Interchangeable Plug Input Voltage Range: 90 VAC to 264 VAC Number of Outputs: 1 Rated Output Power: 100 W Output Voltage: 12V, 15V, 18V, 19V, 20V, 24V, 48V Output Current: 8.34A, 6.67A, 5.56A, 5.27A, 5.0A, 4.17A, 2.1A DC Output Connector: 2.1 mm Barrel Plug AC Plug Included Approval: EN60601-1, UL60601-1 Brand: Cincon Commercial/Medical: Medical Efficiency: Level V For more details, please contact us below or download the catalog.

• LED lighting

The Bright straight LED fluorescent lamp for indoor lighting is a high-brightness, high-efficiency LED fluorescent light made in Japan (manufactured by Elebam). Since LED fluorescents do not use harmful substances found in mercury lamps, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as it does not use harmful substances from mercury lamps → The aluminum and polycarbonate used are recyclable ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about five times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to the lifespan of traditional fluorescent lamps: about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements For more details, please contact us or download the catalog.

• LED lighting

The Bright straight LED fluorescent lamp for indoor lighting is a high-brightness, high-efficiency LED fluorescent light made in Japan (by Elebam). Since LED fluorescents do not use harmful substances found in mercury lamps, they can be disposed of easily. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as they do not contain harmful substances from mercury lamps → The aluminum and polycarbonate used are recyclable ■ Safe materials that do not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about five times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to traditional fluorescent lamps' lifespan of about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacements For more details, please contact us or download the catalog.

• LED lighting

The Bright Compact Fluorescent Lamp for indoor lighting is a domestically produced (by Elebam) high-brightness, high-efficiency LED fluorescent lamp. Since LED fluorescents do not use harmful substances like mercury, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is reduced. 【Features】 ■ Same shape as compact fluorescent lamps → Can be installed in existing lighting fixtures as it has the same shape as conventional compact fluorescent lamps (FPL/FHP type). ■ Energy-saving, long lifespan, high quality → Utilizes high-performance LEDs to achieve energy savings and a long lifespan (40,000 hours) while maintaining high color rendering (Ra85). → The aluminum and polycarbonate used are recyclable. ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube. → The risk of injury from shattering is low even if dropped. ■ Proven and reliable domestic production → LED fluorescent lamps are produced in domestic factories. High performance and quality, as well as custom solutions for a wide range of demands. For more details, please contact us or download the catalog.

• LED lighting

The "LED Signboard and Lighting Products Catalog" is a product catalog from Bright Co., Ltd. that features LED light panels, LED light boards, LED lighting, LED devices, LED modules, power supplies, and more. We offer a wide range of products, including LED light panels that can be produced in special sizes within approximately 10 days, eye-catching indoor and outdoor LED digital signage that stands out brightly from a distance, and waterproof LED fluorescent lights. [Contents] ■ LED Light Panels ■ Indoor Fabric Signs ■ LED Digital Signage ■ Light Bars ■ LED Modules ■ Lighting Fixtures ■ Power Supplies *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting

The Bright LED board is a surface-emitting board designed for internal illuminated sign production, featuring a thickness of 40 to 50 mm, and is an original product developed by our company (made in Japan). If there is a gap of 40 to 50 mm up to the diffuser, the lamp image will not be visible. The brightness of the diffuser surface is high, ranging from 5000 to 6000 lux, and it adopts a user-friendly design. By simply connecting the light boards vertically and horizontally, custom-sized direct-lit LED internal illuminated signs can be created. It is designed with perforations marked with scissors, allowing for cuts along the perforations (28 mm width) to match the required size for connection. Wiring can be done easily by securing the connection terminals with screws to the terminals on the board surface. 【Features】 ■ Supports desired sizes through vertical and horizontal connections ■ Easy to use as an LED light source with a simple design ■ DC 24V specification ■ Domestic production based on Japanese design For more details, please contact us or download the catalog.

• LED lighting

The "Bright LED Panel" is a slim, high-brightness LED light panel that achieves uniform surface illumination with a brightness of over 3000 lux and a uniformity of over 70%. 【Product Lineup】 ■ Four-sided opening aluminum frame ○ Extremely bright! Transmits even paper posters and photographic prints ○ Thickness: ultra-thin at 26mm ■ Aluminum frame with light unit type ○ Ultra-thin LED light unit design ○ Versatile usage! → Can create a freely designed surface illumination screen as a backlight panel using your own frame or wall design ■ Aluminum frame with tabletop stand type ○ LED illuminated frame with a round aluminum frame in stainless color ○ More shock-resistant compared to conventional lamps, preventing breakage ■ Viewer trace board (color viewer and tracing light table) ○ Ideal for tracing work with a thickness of approximately 20mm for tabletop use For more details, please contact us or download the catalog.

• LED lighting

BRT300AL2 - Toyota Gosei Chip (LED: If = 20mA specification) - 296.0×5.0×2.3t (FR4 substrate 0.8t) - LED pitch 7.0 (mm) - Color temperature 5500–6000K - Input voltage 24V - Input current 120mA - Power consumption 2.9W - Radiation angle 119° - Brightness reference A2 size dual light: 5000Lx B2 size dual light: 4000Lx (Light guide plate 5t: measurement reference value) Light guide plate for 5t & 8t edge light For POP, station, department store signage For lighting, high brightness 3D lenticular This is a standard stock item. We can ship on the same day. (*Orders placed on weekdays in the morning, if out of stock, will be made to order.) For more details, please contact us below or download the catalog.

• LED lighting

BRT300BL3 - Toyota Gosei Chip (LED: If = 20mA specification) - Dimensions: 300.0×5.4×2.0t (FR4 substrate 0.8t) - LED pitch: 5.0 (mm) - Color temperature: 6000K - Input voltage: 24V - Input current: 216mA - Power consumption: 5.2W - Radiation angle: 119° - Brightness reference: A2 size front light: 5000Lx B2 size front light: 4000Lx (Light guide plate 5t: measured value) Light guide plate for 5t & 8t edge light For POP, station, and department store signage For lighting, 3D lenticular high brightness This is a standard stock item from our company. We can ship on the same day. (*Orders placed on weekdays in the morning will be produced to order if out of stock.) For more details, please contact us below or download the catalog.

• LED lighting

BRT286AL5 - Toyota Gosei Chip (LED: If = 20mA specification) - 294.0×5.0×2.5t (Aluminum substrate 1.0t) - LED pitch 8.2(mm) - Color temperature 5500–6000K - Input voltage 12V - Input current 240mA - Power consumption 2.9W - Radiation angle 119° - Brightness reference A4 size single-sided light: 6000Lx A3 size double-sided light: 5000Lx A2 size double-sided light: 4000Lx (Light guide plate 5t: measured value) Light guide plate for 5t & 8t edge light POP, stations, department store illuminated signs, lighting This is a standard stock item of our company. It can be shipped on the same day. (*For orders placed on weekdays in the morning, if out of stock, it will be made to order.) For more details, please contact us below or download the catalog.

• LED lighting

BRT286AL8 - Toyota Gosei Chip (LED: If = 20mA specification) - 294.0×5.0×2.5t (Aluminum substrate 1.0t) - LED pitch 7.0(mm) - Color temperature 5500–6000K - Input voltage 12V - Input current 300mA - Power consumption 3.6W - Radiation angle 119° - Brightness reference A2 size dual illumination: 5000Lx B2 size dual illumination: 4000Lx (Guide plate 5t: Measurement value) Guide plate 5t & 8t for edge lighting For POP, station, and department store signs For lighting, high brightness 3D lenticular This is a standard stock item. We can ship on the same day. (*Orders placed on weekdays in the morning, if out of stock, will be made to order.) For more details, please contact us below or download the catalog.

• LED lighting

BRT130AL8 - Toyota Gosei Chip (LED: If = 20mA specification) - 300.0×8.0×2.5t (FR4 substrate 0.8t) - LED pitch 5.0 (mm) - Color temperature 5500–6000K - Input voltage 12V - Input current 400mA - Power consumption 4.8W - Radiation angle 119° - Brightness reference A1 size dual backlight: 6000Lx B1 size dual backlight: 5000Lx (Light guide plate 5t: measured value) Light guide plate for 5t & 8t edge lighting For POP, station, department store signage For lighting, high brightness 3D lenticular This is a standard stock item. We can ship on the same day. (*Orders placed on weekdays in the morning, if out of stock, will be made to order.) For more details, please contact us below or download the catalog.

• LED lighting

BRT130AL5 - Toyota Gosei Chip (LED: If = 20mA specification) - 300.0×5.0×1.5t (Aluminum substrate 1.0t) - LED pitch 20.0(mm) - Color temperature 6000K - Input voltage 12V - Input current 400mA - Power consumption 4.8W - Radiation angle 119° - Brightness reference A2 size dual light: (Guide plate 5t: Measured value) Guide plate 5t & 8t for edge lighting For signage lighting in POP, stations, and department stores This is a regular stock item. We can ship on the same day. (*Orders placed on weekdays in the morning, if out of stock, will be made to order.) For more details, please contact us below or download the catalog.

• LED lighting

Japanese-made LED Line Fixture LED Bar Light 【Features】 ○ Made in Japan ○ Slim design: Width 21mm x Height 6.5mm; lightweight and high brightness lighting ○ Standard lamp sizes: 315/615/915/1215mm ○ 5630 chip 1210mm Diffusion cover 12.5mm pitch 1440lm 17.2W 25mm pitch 720lm 8.8W Transparent cover 12.5mm pitch 1536lm 17.2W 25mm pitch 7268m 8.8W ○ Two types of LED pitch: 12.5mm and 25mm ○ Overcomes heat. Designed for long life and high reliability ○ DC24V ○ Waterproof rating (IP54) ○ PWM dimming compatible ○ Available in warm white, neutral white, white, daylight white, and daylight colors ○ Rich variations available for custom specifications ○ Ideal as a light source for internal illumination such as light walls, light floors, and light ceilings, as well as for indirect lighting. ○ OEM support available For more details, please contact us or download the catalog.

• LED Module

Japanese-made LED Line Fixture LED Bar Light 【Features】 ○ Made in Japan ○ Slim design: Width 22mm x Height 8.3mm; lightweight and high-brightness lighting ○ Standard lamp sizes: 310/610/910/1210/1510/1810mm Diffusion cover 5050 chip, 1210mm, 4000K 10mm pitch, 1400lm, 21.6W 5630 chip 10mm pitch, 1640lm, 21.6W ○ Overcomes heat. Designed for long life and high reliability ○ DC24V ○ PWM dimming compatible ○ Available in warm white, neutral white, white, daylight white, and daylight colors ○ LED pitch: 10mm ○ 5050 and 5630 LED chips ○ A wide variety of custom specifications available ○ Ideal as a light source for internal lighting such as light walls, light floors, and light ceilings, as well as for indirect lighting. ○ OEM support available For more details, please contact us or download the catalog.

• LED Module

Japanese-made LED Line Fixture LED Bar Light 【Features】 ○ Made in Japan ○ Slim design: Width 22mm x Height 8.8mm; lightweight and high-brightness lighting ○ Standard lamp sizes: 310/610/910/1210/1510/1810mm Diffusion cover 5050 chip, 1210mm, 4000K 10mm pitch, 1400lm, 21.6W 5630 chip 10mm pitch, 1640lm, 21.6W ○ Overcomes heat. Designed for long life and high reliability ○ DC24V ○ PWM dimming compatible ○ Available in warm white, soft white, white, daylight white, and daylight colors ○ LED pitch: 10mm ○ 5050 and 5630 LED chips ○ 27-degree emission angle that illuminates deep shelves ○ A wide variety of custom specifications available ○ Ideal as a light source for internal lighting such as light walls, light floors, and light ceilings, as well as for indirect lighting. ○ OEM support available For more details, please contact us or download the catalog.

• LED Module

Japanese-made LED Line Fixture LED Bar Light 【Features】 ○ Made in Japan ○ Slim design: Width 17 x Height 4.4 mm; lightweight and high-brightness lighting ○ Standard lamp sizes: 310/610/910/1210/1510/1810 mm ○ Overcomes heat; designed for long life and high reliability DC24V ○ Waterproof rating (IP54) ○ PWM dimming compatible ○ Color options: Warm white, neutral white, white, daylight white, daylight color ○ Five types of LED pitch: 7mm, 10mm, 16.7mm, 25mm, 28mm ○ 3020 chip, 1210mm 7mm pitch: 840lm, 11.66W 10mm pitch: 600lm, 8.16W 16.7mm pitch: 360lm, 4.89W 25mm pitch: 240lm, 3.26W ○ 5630 chip, 1210mm 10mm pitch: 2160lm, 21.6W 12.5mm pitch: 1728lm, 17.3W ○ Rich variations available for custom specifications ○ Ideal as a light source for backlit lighting such as light walls, light floors, and light ceilings, as well as for indirect lighting. ○ OEM support available For more details, please contact us or download the catalog.

• LED Module

Japanese-made LED Line Fixture LO Series AC100V LED Bar Light 【Features】 ○ Made in Japan ○ Slim design: 28mm wide x 8mm high; lightweight with high brightness ○ Standard lamp sizes: 310/610/910/1210/1510/1810mm ○ Overcomes heat; designed for long life and high reliability ○ Suitable for wooden shelves and glass shelves ○ AC 100V line outlet plug ○ Available in bulb color, warm white, white, daylight white, and daylight color ○ LED pitch: 11mm ○ 5050 and 5630 LED chips ○ A wide variety of custom specifications available ○ Ideal as a light source for backlit lighting such as light walls, light floors, and light ceilings, as well as for indirect lighting. ○ OEM support available For more details, please contact us or download the catalog.

• LED Module

LED Lighting Unit LJ Series 1) Light bar for 5mm thick light guide plate. 2) Adoption of aluminum frame ensures heat dissipation and strength. 3) Components such as light guide plates and films can be inserted up to a thickness of 6mm. 4) Unit length can be selected according to system variations. (Standard unit lengths: based on 300mm and 420mm) *Other options, including moisture-proof coating specifications and rear hole processing, are also available. ● For more details, please contact us or download the catalog.

• LED lighting

This is a constant current AC/DC power supply manufactured by San-Ei Electric. <Features> - AC input, dedicated to 200V (200-265V) - PSE certified product - Maximum input VA (60VA) - Rated output current (350mA) - Output voltage range (DC80V-150V) - Aluminum surface anodized treatment - Operating ambient temperature: -20 degrees to 50 degrees <Specifications> - Maximum output power: 52.5W - IP65 level For more details, please contact us below or download the catalog.

• LED lighting

This is a constant current AC/DC power supply manufactured by San-Ei Electric. <Features> - AC input, dedicated to 200V (200-265V) - PSE certified product - Maximum input VA (115VA) - Rated output current (700mA) - Output voltage range (DC80V-150V) - Aluminum surface anodized treatment - Operating ambient temperature: -20 degrees to 50 degrees <Specifications> - Maximum output power: 105W - IP65 level For more details, please contact us below or download the catalog.

• LED lighting

This is a constant current AC/DC power supply manufactured by San-Ei Electric. <Features> - AC input, free voltage (100-265V) - PSE certified product - Maximum input VA (55VA) - Rated output current (350mA) - Output voltage range (DC60V-130V) - Aluminum surface anodized treatment - Operating ambient temperature: -20 degrees to 50 degrees <Specifications> - Maximum output power: 45.5W - IP65 level For more details, please contact us below or download the catalog.

• LED lighting

This is a constant current AC/DC power supply manufactured by San-Ei Electric. <Features> - AC input, free voltage (100-240V) - PSE certified product - Maximum input VA (98VA) - Rated output current (350mA) - Output voltage range (DC60V-130V) - Aluminum surface anodized treatment - Operating ambient temperature: -20 degrees to 50 degrees <Specifications> - Maximum output power: 90W - IP65 level For more details, please contact us below or download the catalog.

• LED lighting