TSP List of Products and Services

The high-performance heat-shielding sheet "Netsu Mamore" can cut almost all (95-97%) radiant heat thanks to its 99% pure aluminum coating. By installing it under the roofs, in the ceilings, and on the walls of buildings such as factories and warehouses, it alleviates indoor temperature rises, reduces air conditioning load, and contributes to energy savings. By directly applying it to high-temperature heat source equipment within factories (such as drying ovens, manufacturing furnaces, firing kilns, and piping ducts), it suppresses radiant heat and significantly reduces internal radiant loss, thereby lowering fuel costs, improving productivity, and providing heat-insulating mats that protect workers from burns and other injuries. It also helps improve the working environment, making it effective for heatstroke prevention. Covering control panels, equipment, and piping located outdoors or near high-heat equipment prevents failures and damage caused by heat. We offer a wide range of products tailored to various applications.

• Other Energy Saving

▮Type: Silicone-modified acrylic resin water-based heat-reflective paint ▮Features 　　○ High reflectivity and over 8-10 years of excellent weather resistance due to a composite diffuse reflection structure created by special heat-reflective pigments and ultra-fine ceramic powder (non-hollow). 　　○ Suppresses high-temperature degradation of the painted surface. 　　○ Exhibits excellent aesthetic quality and dirt-repellent effects due to the ultra-fine ceramic powder. 　　○ The painted surface is smooth with a finish that has a gloss level of about 80%.

• paint

The iQUE film has a function like a magical mirror that selectively allows light to pass through. ◆ The iQUE film selectively transmits only sunlight while cutting out infrared rays that cause heat and UV rays that lead to fading. ◆ Therefore, areas by the window remain cool, and it also prevents fading of furniture and other items. It "specially selects" only the necessary sunlight (visible light) to bring into the room while reflecting and cutting off over 90% of unnecessary solar heat (thermal rays). This magical "transparent mirror" is called Specialty Selective. The environmental technology of iQUE, created by Dr. Gene Woodard, has been patented worldwide, including in Japan. * For more details, please refer to the PDF materials or feel free to contact us.

• Heat shielding film

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options) (water tank is optional). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of electricity for the compressor, achieving about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

• Other Energy Saving

The Cool Roof is a heat-insulating and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. **Features** ★ The Cool Roof uses sheets made of polyethylene-based resin. ★ It blocks sunlight with the sheets, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheets and the roof prevents heat transfer. ★ Air flows through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas on single corrugated roofs (verified measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress radiant cooling, which helps reduce condensation. ★ Additionally, it has noise reduction effects and protects roofing materials. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day (depending on the type of corrugated material and environment).

• others

The 'α-HT' device is used extensively in factories to reduce the power consumption of commercial air conditioners by 15 to 30%. The 'α-HT' works by stirring the refrigerant and refrigerating oil to dissolve them, smoothing the flow and reducing the load on the compressor. This accelerates the time it takes to reach the set temperature for both heating and cooling, thereby lowering the power consumption of the air conditioning unit. This technology was patented in 2015 and has become a new option for energy saving in commercial air conditioning systems. It can be installed simply by inserting it into the piping of the air conditioning unit. It is compatible not only with commercial air conditioners but also with gas heat pumps. It requires no water or electricity, incurs no running costs, and does not need consumables or replacement parts, making maintenance unnecessary. 【Features】 ■ Can be installed with standard air conditioning work (for commercial air conditioners of 10 kW or more) ■ Simply inserted into the piping ■ No running costs ■ No maintenance required

• others

★This unit can be installed inside a cubicle and connected to wires with crimp terminals, providing significant benefits for those who believe there is nothing more they can do to reduce power consumption and CO2 emissions through various measures. ★The main component of the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reducing internal resistance, promoting the flow of current, and thereby reducing power consumption and CO2 emissions. ★The ferrite (iron oxide) component also reduces harmonic noise. ★It achieves a reduction of over 5% in the overall power consumption of the cubicle, contributing significantly to the SDGs by also lowering CO2 emissions. ★If a power reduction effect of 5% or more is not recognized, we will remove the unit upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not adversely affect the cubicle, allowing you to use it with peace of mind. ★It is a groundbreaking SDGs contribution unit that is unlike any other. ★It has been introduced in approximately 1,000 companies in Japan, with over 2,200 sets installed. It is also being expanded overseas.

• others

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation area. ★ Both initial and running costs can be kept low. Air usage: 28ℓ/min, water usage is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (demo units are also available for loan).

• others

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the right timing, all while maintaining comfort in the facility without causing environmental changes.

• Demand Monitoring

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

• Demand Monitoring

▮BRIGHT: Mercury lamp and floodlight alternative LED with high versatility ▮CORE: Mercury lamp and floodlight alternative LED with high luminous efficiency, brightening the entire space ▮KING: Ensures necessary illuminance on work surfaces and floors with appropriate light distribution angle ▮RED: LED lighting suitable for high-temperature environments (100℃) ▮ICE: LED lighting suitable for low-temperature environments (-60℃) ▮San: LED lighting specifically designed for acid resistance ▮OIL: LED lighting compatible with oil mist

• LED lighting

In factories around the world, many heating systems are in operation, consuming a lot of energy. While the need for insulation is being demanded as an environmental measure, implementing such measures has required time, cost, and effort. Breaking this common understanding, 'Insulation Paint HIP Aero hito-nuri' achieves "fast and easy" insulation. One coat for "easy insulation." One coat for "painting by ourselves." Insulation measures are now in the era of paint.

• others

In factories around the world, many heating systems are in operation, consuming a lot of energy. While the need for insulation is being demanded as an environmental measure, implementing such measures has required time, cost, and effort. Breaking this common understanding, 'Insulation Paint HIP Aero hito-nuri' achieves "fast and easy" insulation. One coat for "easy insulation." One coat for "do-it-yourself painting." Insulation measures are now in the era of paint.

• others

Various issues arise with air conditioning and plumbing systems. By scientifically investigating "why problems occur," we provide new value to our customers. As generalists in water and air, we offer a wide range of services, including equipment cleaning, maintenance, and measurement analysis and research.

• others

This is a product that uses the transparent universal film "VIRtech," which prevents contact infections through the power of science. The "VIRtech" film was developed through a project by a national research institution (NEDO) and the Advanced Industrial Science and Technology Center at the University of Tokyo. It can deactivate 99.9% of all types of viruses and bacteria within two hours. By simply applying it to places touched by a large number of people, you can ensure hygiene safety. ❖ A4 size transparent free sheet You can cut it into any size or shape using scissors or a cutter and just stick it on. It has a strong adhesive on the back, so you only need to peel off the separating film. ❖ Grip cover This is a set of two covers, approximately 25mm in diameter and 110mm in length, that can be used on doors and handrails. You can simply open it and snap it on for immediate use. The color is a calm ivory. ❖ Tape This is a transparent tape product with a width of 40mm. It can be applied to long handrails or complex shapes. It has a strong adhesive on the back, so you just need to peel off the separating film.

• others

Mainly products and services for heat stroke prevention at factory sites ▮ The definitive solution for heat stroke prevention for factory workers with completely dry mist ▮ Mist fans that cool the entire factory with winds reaching 10m and 20m ▮ Cooling vests using cooling agents ▮ Cooling vests for full harnesses using cooling agents ▮ Portable heat shielding sheets to protect workers from high-temperature facilities in the factory ▮ Portable heat shielding sheets to alleviate room temperature throughout the factory and protect workers from high-temperature equipment ▮ Temperature alleviation throughout the factory and warehouse with metal corrugated roof heat shielding sheets ▮ Heat shielding paint that maintains effectiveness for a long time to alleviate the temperature of the entire building ▮ High-quality heat shielding film for windows ▮ Heat shielding paint and heat shielding sheets for glass

• others

Features 　　○ It is a rust-converting type of water-based paint that transforms red rust into a black coating to prevent iron corrosion. 　　○ It has high adhesion due to new crosslinking technology and excels in water resistance, corrosion resistance, and weather resistance. 　　○ Since it can be directly applied to red rust, even in hard-to-remove rust areas, work efficiency is improved. However, please remove any loose rust. (Work equivalent to type 3 surface preparation) 　　○ Being water-based, it offers excellent workability.

• paint

The Cool Mist Fan Fūjin and Fūjin W feature: - Multiple cool mist nozzles mounted on a large fan, spraying mist along with the airflow to instantly cool large spaces such as factories and warehouses. - Can be used with tank water supply if there is no tap water available. - No special maintenance required due to the nozzle design. - Available with a caster type (optional), making it easy to move.

• Other processing machines

It is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be realized at a low price. Air usage: 28ℓ/min, water usage is from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

• Other processing machines

★ Deteriorated and dirty FRP elevated water tanks and receiving tanks negatively impact the impression of a building. Additionally, FRP tanks are generally prone to algae growth and bacterial proliferation due to photosynthesis. ★ Tank Sten Coat PS500 solves all these problems. By applying Tank Sten Coat PS500 to existing FRP tanks, they can be transformed into entirely new tanks. ★ It comes with a 10-year warranty with responsible construction. ★ This 21st-century construction method is environmentally friendly as it reduces the generation of industrial waste by extending the service life.

• Other polymer materials

In addition to air conditioning equipment, factories have various types of heat exchangers and piping (for gas, oil, etc.). These complex systems are often thought of as "things that cannot be cleaned," but in reality, cleaning them can lead to significant improvements in overall factory productivity. You can trust us to handle these cleaning processes, which require advanced cleaning technology, with confidence.

• others

A "magnetic water treatment device" developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, using a powerful permanent magnet (6000 gauss) to prevent scale formation in piping, corrosion against rust, and suppress the occurrence of slime, such as in chiller clean towers. When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime within the pipes. Due to its simple structure, installation is easy, maintenance is straightforward, and it can be used almost permanently. No water treatment chemicals are required. The treated water is safe and produces no pollution in wastewater.

• Piping Materials

★ Developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, this "magnetic water treatment device" uses a powerful permanent magnet (6000 Gauss) to prevent scale formation in pipes, protect against rust, and suppress the generation of slime, such as in chiller clean towers. ★ When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime inside the pipes. ★ Its simple structure allows for easy installation and maintenance, making it usable for almost an indefinite period. ★ No water treatment chemicals are required. ★ The treated water is safe and produces no harmful waste.

• Piping Materials

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressor for energy efficiency at the right timing, all while maintaining comfort in the facility without causing environmental changes.

• Demand Monitoring

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

• Demand Monitoring

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

• Demand Monitoring

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining comfort in the facility without causing environmental changes.

• Demand Monitoring

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining comfort in the facility without causing environmental changes.

• Demand Monitoring

A "magnetic water treatment device" developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, using a powerful permanent magnet (6000 gauss) to prevent scale formation in pipes, corrosion against rust, and suppress the generation of slime, such as in chiller clean towers. When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime inside the pipes. Due to its simple structure, installation is easy, maintenance is straightforward, and it can be used almost permanently. No water treatment chemicals are required. The treated water is safe and produces no harmful waste.

• Piping Materials

**Features of this Drone** - Equipped with a special specification (new feature) specialized for stable flight in narrow spaces. → A hovering assist function has been added to ensure stable flight in confined areas. → The drone body, its control software, image processing, and all applications are developed in-house and are domestically produced. - Currently the smallest and lightest class available, capable of flying for 11 minutes on a single battery. → Weight: 243g including the battery, Size: 200mm or less. - LED lighting + ultra-sensitive camera → A special camera that can capture clear images even in deep dark spaces. Additionally, we offer facility inspection and spatial measurement services using this product. *For more details, please refer to the materials. Feel free to contact us.*

• Surveillance Cameras

This is an electromagnetic water treatment device designed to prevent scale adhesion, corrosion, and slime suppression without chemicals, in order to maintain the stability of cooling water efficiency in cooling system piping in factories and various facilities.

• Forging Machine

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the right timing, all while maintaining the comfort of the facility without causing environmental changes.

• Demand Monitoring

This is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides site cooling of over -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature dropped from 40°C to 27°C depending on the installation environment. ★ It can be installed in a space, requiring minimal space for installation. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 5L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for approximately 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

• others

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of over -8°C (varies depending on the environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air consumption: 28ℓ/min, water consumption is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

• others

Compatible with full harness. Long-lasting cooling. ◆ Can be used in explosion-proof areas as it does not use electricity like fans. ◆ A cooling vest developed for police officers has been improved for full harness safety belts. ◆ Multiple pockets for ice packs allow for repositioning of the ice packs according to the work position. ◆ One vest and four ice packs make a set. The weight of the four ice packs is approximately 1 kg. ◆ The vest material is 90% nylon and 10% polyurethane. ◆ Anti-bacterial and deodorizing, static electricity prevention processing.

• others

1. Energy Saving and CO2 Emission Reduction ◆ New concept power reduction unit "ecomo" ◆ High-performance heat insulation sheet "Netsu Mamore" ◆ Air conditioning outdoor unit energy-saving system "ESCO-ONE" ◆ Air conditioning refrigerant stirring device "α-HT" ◆ Heat insulation sheet for metal standing seam roofs "Hie Roof" ◆ Self-generating power system utilizing waste heat "Furekina" ◆ New structure heat insulation paint "Chilcoat" ◆ High-spec window solar control film "iQUE" ◆ Large-scale surface floating debris/oil recovery pump "Gyro Skimmer" ◆ Floating oil recovery device "Eco It" ◆ Ultra water-saving nozzle "Bubble90" 2. Heat Stroke and Environmental Improvement ◆ Mist without a wet feeling "Cool Mist Line" ◆ Cooling vests using refrigerants "Cooling Vest" "Ice Hane Vest" ◆ Air conditioning + indoor ventilation + chair negative pressure reduction "ecowin Air" 3. Green Maintenance and Services ◆ Video inspection service for narrow and dark places using a special small drone "IBIS2" ◆ Complete renovation of FRP water tanks "Tungsten Coat" ◆ Scale and slime adhesion prevention device for piping "Pola" 4. Disaster Prevention and Mitigation ◆ Automatic fire extinguishing system that does not require power "Fire Erase" and others.

• others

Touring the factory, the pipes through which water flows can be likened to "blood vessels" in a human body. Just as human blood vessels and factory pipes age (degrade over time), they can develop various troubles. To continue using the "pipes," which are the blood vessels of the factory, it is important to conduct regular health checks to prevent issues before they arise. ◆ Are there any factors that could lead to trouble? - The pipes have been in place for over 15 years. - The flow through the pipes is poor. - There are strange odors or noises coming from the pipes. - There has been a history of leaks in the system. ◆ If any of the above phenomena are present, a current investigation of the pipes is necessary.

• others

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ The Cool Roof uses sheets made of polyethylene-based resin. ★ It blocks sunlight with the sheets, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheets and the roof prevents heat transfer. ★ Air flows through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single corrugated roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

• others

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the right timing, all while maintaining comfort in the facility without causing environmental changes.

• Demand Monitoring

"Bubble90" is a revolutionary water-saving device that is completely different in dimension from conventional water-saving cartridges and nozzles, featuring compatibility with hard and soft water and maintenance-free functionality. It converts water into bubbles inside the nozzle and continuously releases these bubbles while varying the amount of water released. The bubbles effectively hit the surfaces being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth the amount of water used traditionally. Additionally, it is equipped with a water pressure and flow adjustment feature that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. 【Features】 ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment functionality ■ Maintenance-free with clog prevention features ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

• nozzle

Automatic faucets allow you to turn the water on and off without touching levers or handles, making handwashing more hygienic.

• nozzle

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water discharged. The bubbles effectively hit the items being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth of the water volume used traditionally. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. [Features] ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

• nozzle

★ Deteriorated and dirty FRP elevated water tanks and receiving tanks negatively impact the impression of a building. Additionally, FRP water tanks are generally prone to algae growth and bacterial proliferation due to photosynthesis. ★ Tank Sten Coat PS500 solves all these challenges. By applying Tank Sten Coat PS500 to existing FRP tanks, they can be transformed into entirely new tanks. ★ This 21st-century construction method extends the service life, reduces the generation of industrial waste, and is environmentally friendly.

• Other polymer materials

Air conditioning units are said to account for about 40% of electricity usage in offices, stores, commercial facilities, and other establishments. The device that achieves energy savings is the 'α-HT'. The 'α-HT' reduces the load on the compressor by stirring the refrigerant and refrigerating oil to dissolve them, thereby shortening the time it takes to reach the set temperature for both heating and cooling, which reduces the power consumption of the air conditioning unit. It can be installed simply by inserting it into the piping of the air conditioning unit. It is compatible not only with commercial air conditioners but also with gas heat pumps. It does not require water or electricity, resulting in no running costs, and since there are no consumables or replacement parts needed, maintenance is also unnecessary. 【Features】 ■ Can be installed with standard air conditioning work (for commercial air conditioners of 10 kW or more) ■ Simply insert it into the piping ■ No running costs ■ No maintenance required *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other air conditioning equipment

■Maximum reach distance: Approximately 50m ■Super strong 6 kW ■Directly sends cold air to people ■Effective even while ventilating, with windows or shutters open ■Strong cold air at -13℃ from room temperature ■Available in combo type with integrated indoor and outdoor units and separate type ■Various installation methods are available to suit the usage environment 　(Experience in explosion-proof environments)

• others
• air conditioning