TSP List of Products and Services

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. It can be installed under the roofs, in the ceilings, and on the walls of buildings such as factories and warehouses to mitigate indoor temperature rises, contributing to heatstroke prevention and improving working conditions. It reduces the load on air conditioning and has energy-saving effects. When applied to high-temperature equipment like drying ovens and kilns within factories, it lowers the surface temperature of the equipment, alleviating surrounding temperatures and improving the working environment. Furthermore, it significantly reduces heat loss from the equipment, cutting fuel costs and enhancing productivity. Additionally, by covering control panels, devices, and piping located outdoors or near high-heat equipment, it prevents failures and damage caused by heat. Thanks to a special surface treatment, it is resistant to corrosion from acids and alkalis, as well as electrolytic corrosion, allowing for over 10 years of use (SP-PRO, SP-Air, SP-PED).

Chilcoat, the only solar reflective paint of its kind in Japan, offers a variety of heat-reflective paints for various applications. ▮ HSG / Colorless high transparency heat-reflective paint ▮ HSP / High diffuse reflection non-hollow thin film heat-reflective water-based paint ▮ RC / Red rust conversion one-component room temperature crosslinking anti-corrosion water-based paint ▮ RS / Metal oxidation prevention anti-corrosion inorganic paint ▮ WIP / Woodworking inorganic paint ▮ LFP / Phosphorescent fluorescent water-based paint This is a comprehensive document on these paints.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single standing seam roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof, which can suppress radiative cooling, also helps reduce condensation. ★ As a secondary effect, it provides noise reduction and protects roofing materials. ★ There is a 5-year performance guarantee, with annual inspections conducted within this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

□ Industry's first manufacturer 3-year warranty, allowing you to use it with peace of mind. □ For outdoor workers' heatstroke prevention and health management. □ Import food inspection certificate obtained. □ Compared to other products, the yield of block ice is overwhelmingly high, and the ice shaving time is also shorter. □ Noise level is quiet, ranging from 63 to 71 dB. □ Currently offering at a special price!!

The "High-Performance Heat Shield Sheet" is a sheet that can cut almost all radiant heat due to its 99% pure aluminum coating. The heat inside buildings is overwhelmingly (over 70%) radiant heat. By installing it under roofs, in attics, on walls, and on windows, it reflects almost all of that radiant heat, significantly reducing indoor temperatures. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. There are also sheets that excel in preventing condensation and allowing moisture permeability. It can also be used for high-temperature equipment in factories. 【Features】 - Usable with various materials - Easy to install due to its extreme thinness - Installation can be adapted to roof shapes (slate, corrugated, tent warehouses) - High heat shielding effect contributes to reduced air conditioning costs and energy savings For more details, please refer to the materials. Feel free to contact us with any inquiries.

▮ It can be easily attached to the window frame sash. Just cut it to the size of the window and stick it on with the included double-sided tape. ▮ It has a high heat insulation effect, helping to moderate the indoor temperature. ▮ Perfect for energy-saving measures. ▮ It also provides privacy protection. ▮ Available in two sizes: M (150mm x 95mm) and L (210mm x 95mm). ▮ Colors available are white, silver, and ivy pattern.

Features of Chircote HSG-HO1 7 2 - It enables measures against indoor heatstroke and energy conservation, as well as CO2 reduction. - It cuts over 85% of infrared wavelength transmission on average, reducing indoor temperature rise. - It cuts over 99% of ultraviolet wavelength transmission on average, preventing indoor fading and deterioration. - It does not cut visible light, so it does not affect indoor brightness. - The coating is colorless and highly transparent, without distortion or cloudiness, and does not alter the outdoor view. - In winter, it helps retain indoor heat and suppresses condensation. - The coating has high hardness, excellent scratch resistance and chemical resistance, with a weathering lifespan of about 10 years, making it economically advantageous. - It can be applied to challenging three-dimensional curved surfaces that are difficult for heat-shielding films. Features HSG allows for colorless, highly transparent heat-shielding coatings on three-dimensional curved surfaces and patterned glass that could not be applied with "heat-shielding films," as well as on acrylic and polycarbonate. Additionally, it can be applied seamlessly on large surfaces, primarily from the indoor side, but can also be applied from the outdoor side depending on the conditions.

The "high-performance heat insulation sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. This effect can significantly contribute to the SDGs. By installing it under roofs, in ceilings, and on walls of buildings, the indoor temperature decreases, reducing the air conditioning operating rate, leading to energy-saving effects and also serving as a measure against heatstroke. In winter, its insulation effect prevents heating from escaping outside, resulting in energy savings. When applied to high-temperature equipment such as drying ovens and firing furnaces in factories, the surface temperature of the equipment decreases, alleviating the surrounding temperature and improving the working environment. Furthermore, it significantly reduces heat loss from the equipment, lowering fuel costs and increasing productivity. By covering control panels, devices, and piping located outdoors or near high-temperature equipment, it prevents failures and damage caused by heat. Thanks to its special surface treatment, it is resistant to corrosion from acids and alkalis as well as electrolytic corrosion, allowing for use for over 10 years (SP-PRO, SP-Air, SP-PED).

"Ree Roof" is a heat insulation and thermal insulation system for metal standing seam roofs that utilizes the effect of "shade." It employs polyethylene resin sheets. By covering approximately 80% of the standing seam roof, various benefits can be achieved. Additionally, it can be installed on two types of roofs: the standing seam type commonly found in large warehouses and factories, and the overlapping type seen in smaller stores. For other types of roofs, such as snap-lock, please contact us. 【Features】 ■ Low cost ■ Short installation time ■ Zero maintenance cost ■ Sustained effectiveness ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

The high-performance heat-shielding sheet "Netsu Mamore" is: ★ A sheet that can cut almost all radiant heat due to its 99% pure aluminum coating. ★ It is extremely thin at 0.2mm, lightweight, flexible, and easy to install (SP-PRO, SP-HTR). ★ By simply applying it to high-temperature equipment in factories such as drying ovens, manufacturing furnaces, kilns, and piping, it significantly reduces heat loss from the equipment. ★ It contributes to improving the working environment for employees. ★ It greatly reduces fuel costs, enhances productivity, and contributes to energy savings and CO2 emission reductions. ★ With a special surface treatment, it is resistant to corrosion and electrolysis from acids and alkalis (SP-PRO, SP-CH, SP-Air, SP-SRX), has no aging degradation, and can be used for over 10 years. ★ There is also a heat-shielding mat + insulation mat that does not get hot when touched. 【Achievements and Examples of Use】 * High-temperature facilities such as drying ovens, boilers, kilns, and piping within factories * Various outdoor control panels * Attics and intermediate roofs of factories, warehouses, and facilities

★ The high-performance heat-shielding sheet "Netsu Mamore" is a sheet that can cut almost all (95-97%) radiant heat due to its 99% pure aluminum coating. ★ With a thickness of 0.23mm, it is extremely thin (SP-PRO). It is lightweight, flexible, and easy to install. ★ Thanks to a special surface treatment, it is resistant to corrosion and electrolysis caused by acids and alkalis, allowing for over 10 years of use (SP-PRO, SP-Air, SP-PED). ★ By simply applying it to high-temperature heat source facilities in factories (drying ovens, manufacturing furnaces, sintering furnaces, piping ducts, etc.), it can help alleviate the overall temperature in the factory, significantly reduce internal radiant loss, lower fuel costs, improve productivity (SP-PRO, SP-HTR), and protect workers from burns and other accidents (SP-AL8s, SP-AL25). ★ Covering control panels, equipment, and piping located outdoors or near high-heat facilities can prevent failures and damage caused by heat. ★ Installing it under the roofs, in the ceilings, or on the walls of buildings such as factories and warehouses can help alleviate indoor temperature rises, reduce air conditioning loads, and provide energy-saving effects. ★ Our company case studies https://www.tsp-kk.com/%E7%B4%8D%E5%85%A5%E4%BA%8B%E4%BE%8B3/

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiative heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. Additionally, due to a special surface treatment, it is resistant to corrosion from acids and alkalis, as well as electrolysis, allowing for over 10 years of use. By simply applying it to high-temperature equipment in factories, such as kilns, it significantly reduces heat loss. This leads to shorter startup times for kilns and reduced firing times, thereby improving productivity. Furthermore, it protects workers from burns and other accidents, contributing to an improved working environment. This case study collection includes nine installation examples, including those for high-temperature equipment. [Featured Cases] ■ Furnace Heat Mitigation and Energy Saving Improvement Case ■ Kiln Heat Mitigation and Energy Saving Improvement Case ■ Factory Warehouse Roof and West Wall Heat Mitigation Improvement Case ■ Food Factory Ceiling Heat Mitigation Improvement Case ■ Control Panel Temperature Rise Prevention Improvement Case ■ Adsorption Tower Insulation Material Replacement Improvement Case ■ Image Measurement Device Light Shielding Improvement Case ■ Factory High-Temperature Work Site Heat Mitigation Improvement Case ■ Warehouse Heat Shielding Construction Overview

The proportion of heat transferred by buildings is overwhelmingly dominated by radiant heat (over 70% of total heat). The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiant heat due to its 99% pure aluminum coating. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. Additionally, due to its special surface treatment, it is resistant to corrosion from acids and alkalis as well as electrolysis, allowing for over 10 years of use. When used on buildings, it provides a super cool and comfortable environment in the summer. This case study collection includes nine installation examples, including those for warehouses and buildings. [Featured Cases] ■ Furnace: Heat stress countermeasures and energy-saving improvement case ■ Firing furnace: Heat stress countermeasures and energy-saving improvement case ■ Factory warehouse roof and west wall: Heat stress countermeasures improvement case ■ Food factory ceiling: Heat stress countermeasures improvement case ■ Control panel: Temperature rise prevention improvement case ■ Adsorption tower: Insulation material replacement countermeasures improvement case ■ Image measurement device: Light shielding improvement case ■ Factory high-temperature work site: Heat stress countermeasures improvement case ■ Warehouse heat shielding construction overview

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiative heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. It covers equipment and piping near high-temperature facilities to prevent failures and damage caused by heat. Additionally, when applied to high-temperature equipment in factories such as drying ovens, manufacturing furnaces, and firing kilns, it significantly reduces heat loss. This helps to lower fuel costs, improve productivity, and protect workers from accidents such as burns. Furthermore, due to its special surface treatment, it is resistant to corrosion from acids and alkalis as well as electrolytic corrosion, allowing for over 10 years of use.

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. ◆ Burn Prevention It covers high-temperature equipment and hot pipes, protecting workers from the risk of burns. ◆ Prevention of Heat-Related Failures and Malfunctions It also covers control devices and pipes near high-temperature equipment to prevent failures and damage caused by heat. ◆ Prevention of Heat Loss Additionally, when applied to high-temperature equipment in factories, such as drying ovens, manufacturing furnaces, and firing kilns, it significantly reduces heat loss. This helps reduce fuel costs, improve productivity, and further protects workers from accidents like burns. Moreover, due to its special surface treatment, it is resistant to corrosion from acids and alkalis, as well as electrolytic corrosion, allowing for over 10 years of use. 【Features and Examples of Use】 ■ Usable on various materials ■ Can be easily cut with scissors or similar tools, making installation simple ■ Contributes to energy savings with high heat shielding (reduction of heat loss) ■ Portable panels that are easy to install are also available ■ There are cases where the surface temperature of the furnace has decreased by approximately 130℃.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. On page 5 of this case study collection, the following case is presented: CASE 3: Manufacturing Plant - Comparison of Heat Shielding Products ☆ This is a case where the Cool Roof was adopted as a result of a comprehensive evaluation of three construction methods. ☆ 【Features】 ★ It blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the constructed area and the non-constructed area of the single standing seam roof (demonstration measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof, which can suppress radiative cooling, also helps reduce condensation. ★ Secondary effects: noise reduction and roof material protection. ★ 5-year performance warranty with free annual inspections. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiative heat due to its aluminum coating with a purity of 99%. With a thickness of 0.2mm to 0.3mm, it is extremely thin, lightweight, flexible, and easy to install. It covers control panels, equipment, or piping located outdoors or near high-heat facilities to prevent failures or damage caused by heat. Additionally, when applied to high-temperature equipment in factories such as drying ovens, manufacturing furnaces, and kilns, it significantly reduces heat loss. This helps to cut fuel costs, improve productivity, and protect workers from burns and other accidents. Moreover, due to its special surface treatment, it is resistant to corrosion from acids and alkalis as well as electrolysis, allowing for over 10 years of use. 【Features and Examples of Use】 ■ Usable on various materials ■ Can be easily cut with scissors, making installation simple ■ Contributes to energy savings with high heat shielding (reduction of heat loss) ■ Portable panels that are easy to install are also available ■ There are cases where the surface temperature of furnaces has decreased by about 130℃ 【Track Record and Examples of Use】 * Prevents equipment deterioration and malfunction due to high heat in piping and control panels. * Measures against heat loss, heatstroke, and burns in high-temperature facilities such as drying ovens and boilers. * Energy-saving and heatstroke prevention in factories, warehouses, offices, and wooden houses.

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiative heat thanks to its 99% pure aluminum coating. It is extremely thin, with a thickness of 0.2mm to 0.3mm. Lightweight, flexible, and easy to install, it covers cubicles, high-voltage receiving equipment, control panels, or piping near outdoor areas or high-heat equipment to prevent failures or damage due to heat. Additionally, applying it to high-temperature equipment in factories, such as drying ovens, manufacturing furnaces, and firing kilns, significantly reduces heat loss. This leads to reduced fuel costs, improved productivity, and further protects workers from accidents like burns. Moreover, due to its special surface treatment, it is resistant to corrosion from acids and alkalis, as well as electrolysis, allowing for over 10 years of use.

We will provide comprehensive proposals from the perspectives of "energy conservation and CO2 emission reduction," "antibacterial and antiviral measures," "disaster prevention and reduction," and "green maintenance." For each, we will propose products and services that ensure reliable effectiveness and high quality.

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. By covering control panels, equipment, and piping located outdoors or near high-heat facilities, it prevents failures and damage caused by heat. With a thickness of 0.2mm to 0.5mm, it is extremely thin, lightweight, flexible, and easy to install. When applied to high-temperature equipment such as drying ovens and kilns within factories, it lowers the surface temperature of the equipment, alleviates surrounding temperatures, and improves the working environment. Furthermore, it significantly reduces heat loss within the equipment, cutting fuel costs and enhancing productivity. When applied to roofs, ceilings, and walls of buildings such as factories and warehouses, it mitigates indoor temperature rises, contributing to heatstroke prevention and improving labor conditions. It also reduces air conditioning load, providing energy-saving benefits. 【Features and Application Examples】 ■ Usable on various materials ■ Easily cut with scissors or similar tools, making installation simple ■ High heat shielding performance (reflectivity of 95-97%) alleviates internal temperature rise ■ Our implementation examples https://www.tsp-kk.com/%E7%B4%8D%E5%85%A5%E4%BA%8B%E4%BE%8B3/

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows nearly a 30°C temperature difference between the installed area and the non-installed area (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance warranty, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

The "High-Performance Heat Insulation Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.5mm. It is lightweight, flexible, and easy to install. When applied to high-temperature equipment in factories, such as drying ovens and firing furnaces, it lowers the surface temperature of the equipment, alleviates the surrounding temperature, and improves the working environment. Furthermore, it significantly reduces heat loss within the equipment, thereby cutting fuel costs and enhancing productivity. Additionally, by covering control panels, devices, and piping located outdoors or near high-heat equipment, it prevents failures and damage caused by heat. 【Features】 - High heat insulation (reduction of heat loss) effect for energy saving, improvement of working environment, and increased productivity. - Its thinness allows for easy cutting with scissors or similar tools, making installation simple. - Heat insulation mats and easily installable portable panels are also available. - Installation on roofs of factories, warehouses, offices, and wooden houses contributes to energy savings and heatstroke prevention.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas of single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ Additionally, it provides noise reduction and roof material protection effects. ★ It comes with a 5-year performance guarantee, with annual inspections conducted during this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

■金属折板屋根専用遮熱シート ■屋根・熱源に貼る高性能遮熱シート ■新構造の遮熱塗料 ■超強力スポットクーラー ■ハイスペックガラス用日射調整フィルム ■ガラス用遮熱塗料 ■窓用遮熱シート ■冷却ベスト ■フルハーネス対応冷却ベスト ■高熱対策可搬式衝立 ■新型アイススライサー、冷凍ストッカー

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. By applying it to the windows of buildings such as factories and warehouses, it helps to mitigate indoor temperature increases, reduce air conditioning load, and achieve energy-saving effects. Our company’s case studies can be found at: https://www.tsp-kk.com/%E7%B4%8D%E5%85%A5%E4%BA%8B%E4%BE%8B3/

★ It is a mist system that sprays uniform water droplets at a level of 15μm into the air. ★ It provides "coolness" inspired by the cedar forest. ★ Recognized at the 2005 Aichi Earth Expo, it has continued collaborative research and verification with various experts. ★ "Dry mist" changes the relationship from sharing heat to sharing coolness!!

The idea of "coolness," inspired by the camphor tree grove, was recognized at the 2005 Expo 2005 Aichi, and since then, collaborative research and verification with various experts have continued. "Dry mist" has transformed the relationship from one of sharing heat among frogs to one of sharing coolness.

If you cannot use partitions or curtains due to obstructing the view, an apron is effective. It is lightweight, easy to move in, and can be washed.

By changing the wrapping method according to the thickness of the piping, heat insulation sheets can be wrapped around both large and small pipes.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy saving and environmental improvement throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single standing seam roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day (using the standing seam method).

"Cool Roof" is a heat insulation and thermal insulation system specifically designed for metal standing seam roofs, utilizing the effect of "shade." It employs polyethylene-based resin sheets and covers approximately 80% of the standing seam roof. ★ For summer heat insulation and heatstroke prevention, and winter heat retention and condensation measures ★ Energy savings through improved air conditioning efficiency ★ Reduction of noise from roofing materials and rain sounds ★ Protection of roofing materials It demonstrates effectiveness. Compatible metal standing seam roof types: - Haze-type commonly found in large warehouses and factories - Overlapping type seen in small stores and similar establishments For other types such as fitting types, please contact us. *For more details, please refer to the PDF document or feel free to contact us.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ The Cool Roof uses sheets made of polyethylene-based resin. ★ It blocks sunlight with the sheets, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheets and the roof prevents heat transfer. ★ Air flows through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single corrugated roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

1. Energy Saving and CO2 Emission Reduction ◆ New concept power reduction unit "ecomo" ◆ High-performance heat insulation sheet "Netsu Mamore" ◆ Air conditioning outdoor unit energy-saving system "ESCO-ONE" ◆ Air conditioning refrigerant stirring device "α-HT" ◆ Heat insulation sheet for metal standing seam roofs "Hie Roof" ◆ Self-generating power system utilizing waste heat "Furekina" ◆ New structure heat insulation paint "Chilcoat" ◆ High-spec window solar control film "iQUE" ◆ Large-scale surface floating debris/oil recovery pump "Gyro Skimmer" ◆ Floating oil recovery device "Eco It" ◆ Ultra water-saving nozzle "Bubble90" 2. Heat Stroke and Environmental Improvement ◆ Mist without a wet feeling "Cool Mist Line" ◆ Cooling vests using refrigerants "Cooling Vest" "Ice Hane Vest" ◆ Air conditioning + indoor ventilation + chair negative pressure reduction "ecowin Air" 3. Green Maintenance and Services ◆ Video inspection service for narrow and dark places using a special small drone "IBIS2" ◆ Complete renovation of FRP water tanks "Tungsten Coat" ◆ Scale and slime adhesion prevention device for piping "Pola" 4. Disaster Prevention and Mitigation ◆ Automatic fire extinguishing system that does not require power "Fire Erase" and others.

Compatible with full harness. Long-lasting cooling. ◆ Can be used in explosion-proof areas as it does not use electricity like fans. ◆ A cooling vest developed for police officers has been improved for full harness safety belts. ◆ Multiple pockets for ice packs allow for repositioning of the ice packs according to the work position. ◆ One vest and four ice packs make a set. The weight of the four ice packs is approximately 1 kg. ◆ The vest material is 90% nylon and 10% polyurethane. ◆ Anti-bacterial and deodorizing, static electricity prevention processing.

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of over -8°C (varies depending on the environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air consumption: 28ℓ/min, water consumption is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

This is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides site cooling of over -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature dropped from 40°C to 27°C depending on the installation environment. ★ It can be installed in a space, requiring minimal space for installation. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 5L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for approximately 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

The Cool Mist Fan Fūjin and Fūjin W feature: - Multiple cool mist nozzles mounted on a large fan, spraying mist along with the airflow to instantly cool large spaces such as factories and warehouses. - Can be used with tank water supply if there is no tap water available. - No special maintenance required due to the nozzle design. - Available with a caster type (optional), making it easy to move.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas of single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ Additionally, it has noise reduction effects and protects roofing materials. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas of single corrugated roofs (verified measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating its insulation effect. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ Additionally, it provides noise reduction and roof material protection effects. ★ Comes with a 5-year performance warranty, with annual inspections during this period. ★ Installation for 1,000 square meters takes about one day, ensuring a short construction period.

In factories around the world, many heating systems are in operation, consuming a lot of energy. While the need for insulation is being demanded as an environmental measure, implementing such measures has required time, cost, and effort. Breaking this common understanding, 'Insulation Paint HIP Aero hito-nuri' achieves "fast and easy" insulation. One coat for "easy insulation." One coat for "do-it-yourself painting." Insulation measures are now in the era of paint.

In factories around the world, many heating systems are in operation, consuming a lot of energy. While the need for insulation is being demanded as an environmental measure, implementing such measures has required time, cost, and effort. Breaking this common understanding, 'Insulation Paint HIP Aero hito-nuri' achieves "fast and easy" insulation. One coat for "easy insulation." One coat for "painting by ourselves." Insulation measures are now in the era of paint.

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation area. ★ Both initial and running costs can be kept low. Air usage: 28ℓ/min, water usage is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (demo units are also available for loan).

The iQUE film has a function like a magical mirror that selectively allows light to pass through. ◆ The iQUE film selectively transmits only sunlight while cutting out infrared rays that cause heat and UV rays that lead to fading. ◆ Therefore, areas by the window remain cool, and it also prevents fading of furniture and other items. It "specially selects" only the necessary sunlight (visible light) to bring into the room while reflecting and cutting off over 90% of unnecessary solar heat (thermal rays). This magical "transparent mirror" is called Specialty Selective. The environmental technology of iQUE, created by Dr. Gene Woodard, has been patented worldwide, including in Japan. * For more details, please refer to the PDF materials or feel free to contact us.

▮Type: Silicone-modified acrylic resin water-based heat-reflective paint ▮Features 　　○ High reflectivity and over 8-10 years of excellent weather resistance due to a composite diffuse reflection structure created by special heat-reflective pigments and ultra-fine ceramic powder (non-hollow). 　　○ Suppresses high-temperature degradation of the painted surface. 　　○ Exhibits excellent aesthetic quality and dirt-repellent effects due to the ultra-fine ceramic powder. 　　○ The painted surface is smooth with a finish that has a gloss level of about 80%.