育良精機 List of Products and Services

The "Mycon 104 IS-CM104" is a compact, high-performance conjet machine. It has a capacity of C19 to 75 and PF16 to 104. The dimensions are W680 × L460 × H390 mm. It comes standard with cutting oil, three die heads, and five sets of blades. 【Specifications】 ■ Capacity: C19 to 75, PF16 to 104 ■ Motor: AC100V 50/60Hz ■ Output - High speed: 610W - Low speed: 750W ■ External dimensions: W680 × L460 × H390 mm ■ Weight: 45 kg *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "IS-4W/IS-4WH." These are four-wheel casters used for corners and starting sections. The safe maximum load is 6.8 kN for the "IS-4W" and 17.6 kN for the "IS-4WH." To prevent deformation or damage, the attachment points of the lifting hardware should be installed to move freely, and they should be used at angles greater than 120 degrees and below the maximum allowable load. 【Specifications】 ■IS-4W 　・Safe maximum load: 6.8 kN 　・Weight: 4.5 kg ■IS-4WH 　・Safe maximum load: 17.6 kN 　・Weight: 7.8 kg *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "ISK-3WH." This is a triple pulley with a maximum safety load of 1.96kN. It has a mass of 1.8kg, and the arm can be easily opened with a lever. 【Specifications】 ■ Maximum safety load: 1.96kN ■ Mass: 1.8kg *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the seesaw cable rollers used at each bend of the cable extension construction. Starting with the "ISK-CB300," which features a switchable design for improved workability, we also have the "IS-CBII," where the rollers rotate independently left and right, ensuring uniform contact regardless of cable diameter, and the "ISK-CBM300," which makes handhole work easy. They can be disassembled for easy transport. 【Lineup】 ■ISK-CB300 ■IS-CBII ■ISK-CBM300 *For more details, please refer to the PDF document or feel free to contact us.

The "IS-3W65/IS-3W85" is a multipurpose cart that features rollers with bearings. It has a one-touch opening and closing mechanism, making it extremely user-friendly. The gaps between the rollers are minimal, preventing cables from coming loose. Additionally, it comes standard with a hook, and the "IS-3W85" model allows for an additional hook. 【Features】 ■ One-touch opening and closing mechanism for exceptional usability ■ Rollers with bearings ■ Minimal gaps between rollers to prevent cables from coming loose ■ Standard hook included (additional hook available for IS-3W85) *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-CR430" is a stackable wire reel. It has outlets on both sides, making it easy to set up. You can pull it out from the inside without tearing the plastic. It is suitable for storing and retrieving bundles of wires. 【Features】 ■ Stackable ■ Easy to set up with outlets on both sides ■ Can be pulled out from the inside without tearing the plastic ■ Suitable for storing and retrieving bundles of wires *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. handles hanging pulley wheels. We offer a lineup including the 0.75kg "IS-OW1," the 0.85kg "ISK-OW2S," and "IS-OW2." The arm can be easily opened with a lever and locks when closed. It features paired rollers. 【Lineup】 ■IS-OW1 ■ISK-OW2S ■IS-OW2 ■ISK-OW3 *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. handles the versatile roller 'KD-1800R'. It is suitable for various purposes such as cable racks, concrete U-shaped ditches, and metal ducts. The upright roller prevents cables from coming loose and allows for side insertion into multi-tier racks. Additionally, the upright roller can be easily tilted. 【Features】 ■ Compatible with various applications such as metal ducts ■ Allows for side insertion into multi-tier racks ■ The upright roller can be easily tilted ■ The upright roller prevents cables from coming loose *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. handles corner rollers. We offer the "KD-325C" for in-corner use and the "KD-400C" for out-corner use. Additionally, we have a dedicated vice, the "KD-325CB," which allows for quick and reliable setup of the corner rollers. 【Specifications (Safety Maximum Load)】 ■ KD-325C (Weight 6kg): 3.92kN ■ KD-400C (Weight 6kg): 3.92kN *For more details, please refer to the PDF document or feel free to contact us.

The "KD-325S II" is an extension roller that allows for easy extension even when existing cables are present. It is designed to be usable even with 2-tier or 3-tier cable racks. Additionally, it can be reconfigured into three patterns, accommodating diameters from φ1 to 90. 【Specifications】 ■ Maximum safe load: 0.78kg ■ Weight: 2.4kg *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our movable four-sided roller. It moves according to the swing range of the cable, making cable pulling operations safe and reliable even with a small number of people. It is stackable, easy to carry, space-saving, and allows for easy one-touch opening and closing with lever operation. 【Features】 ■ Moves according to the swing range of the cable ■ Safe and reliable cable pulling operations with a small number of people ■ Stackable ■ Easy to carry and space-saving ■ Easy one-touch opening and closing with lever operation *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Precision Machinery Co., Ltd. offers four-sided rollers. We have the one-touch opening and closing type "ISH-80" and the "ISH-110" with a vice for up to 50mm in our lineup. The "ISH-110" can be installed anywhere and can be tilted. 【Product Lineup】 ■ISH-80 ■ISH-110 *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. offers "rollers for racks." We have the "ISK-R1" and "ISK-R3," which can be easily installed and provide stability just by placing them on cable racks, as well as the "ISK-R2," which can be easily installed even with existing wires. Additionally, all products in the lineup are designed to save space. 【Product Lineup】 ■ISK-R1 ■ISK-R2 ■ISK-R3 *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. handles the single pipe roller 'ISK-TS300'. It features built-in pairing for smooth rotation. It adopts a three-stage adjustable locking pin system. 【Specifications】 ■Dimensions: φ80×L300mm ■Safety maximum load: 4.9kN ■Applicable pipe: Single pipe outer diameter φ48.6 ■Weight: Roller 3.1kg, Guide 0.9kg (per unit) ■Standard accessories: 2 guides *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the cable rollers handled by Ikuriyoshi Precision Machinery Co., Ltd. With built-in bearings, the cable feeding is smooth, and it is difficult for water and dust to enter due to the use of sealed bearings. The "IHL, IIH, S1H, S2H" models feature high side frames that prevent the cable from coming loose, while the "IIH, S2H" models allow for stackable storage. 【Product Lineup (Partial)】 ■ISS-I ■ISS-IR ■ISS-II ■ISS-IHL ■ISS-IIH *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Precision Machinery Co., Ltd. handles three-way rollers. We offer the "ISS-3400," suitable for racks, and the "ISS-3600," suitable for manholes. The angle of the continuous section is adjustable, and additional connections are possible. 【Product Lineup】 ■ISS-3400 ■ISS-3600 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our foldable cable jacks, 'FJ2000B/FJ3000B'. The "ISK-FJ2000B" features built-in bearings for quick lifting, while the "ISK-FJ3000B" includes a ratchet function for easy jacking. Both products come with a protrusion guard and are sold as a set of two legs without a shaft. 【Product Lineup】 ■ ISK-FJ2000B ■ ISK-FJ3000B *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the cable jacks 'ISG-5000/ISG-3000/ISG-2000' handled by Yukiryo Seiki Co., Ltd. These screw jacks allow for stepless adjustment and feature a compact and lightweight design that is convenient for both transportation and storage. The cable shaft includes a built-in level, and it comes as a set with two legs and a shaft. 【Product Lineup】 ■ISG-5000 ■ISG-3000 ■ISG-2000 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the cable jacks 'ISJ-0680/ISJ-1020' handled by Yukiryo Seiki Co., Ltd. With a drum holding roller, it allows for stepless adjustment of the screw jack. The shaft length can be extended as long as the distance between the roller support and the drum side plate is the same, as the load remains the same. 【Lineup】 ■ISJ-0680 ■ISJ-1020 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the drum rotating platforms 'ISK-DR85/ISK-DR110' handled by Yukiryo Seiki Co., Ltd. These products allow for easy directional changes by one person and are convenient for movement when using two units. The maximum safe load for the 'ISK-DR85' is 9.8kN, while the 'ISK-DR110' has a maximum safe load of 29.4kN. 【Product Lineup】 ■ ISK-DR85 ■ ISK-DR110 *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the drum control device 'ISK-DB280' handled by Yukiryo Seiki Co., Ltd. It can suppress overspinning when the drum becomes lighter and allows for tightening on the drum during wire drawing. With just a simple foot operation, you can apply the brake. If you prepare a single pipe, it can also be operated manually. 【Specifications】 (partial) ■ Applicable drum outer diameter: φ800–2800mm ■ Applicable drum flange width: 48–90mm ■ External dimensions: W340×L1850 (maximum 2720)×H160 (maximum 290) mm *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 10-ton jack 'ISK-DJ10TS' handled by Ikuriyoshi Precision Machinery Co., Ltd. It comes with casters for easy mobility and a simple lever operation for locking. It also includes a drum sway support (with a level gauge). The length of the cable shaft can be customized. Please feel free to consult us. 【Specifications】(partial) ■ Lifting capacity: 98kN ■ Lifting height: Base part 650mm, hydraulic jack 150mm ■ Compatible drum dimensions: Flange diameter 1,500 to 2,800mm, outer width 1,800mm or less ■ Shaft: φ101.6×t25.0×2,300mm ■ External dimensions: L1260×W500×H1545mm *For more details, please refer to the PDF document or feel free to contact us.

Introducing the 'ISK-SD800' handled by Yukiryo Seiki Co., Ltd. This product is a cable drum support type rotating platform that requires no adjustment and is easy to move. It comes standard with a handle, anti-ejection rod, and anti-ejection sleep. 【Specifications】(partial) ■Applicable drum outer diameter: φ440–800mm ■Applicable drum width: 250–550mm ■Maximum safe load (when using a cable drum): 2.94kN ■External dimensions (when using a cable drum): W770×L750×H170mm ■External dimensions (when transporting): W770×L750×H790mm *Using it in areas with many undulations may risk damage to parts. Please refrain from doing so. *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the 'ISR-1200' handled by Yukiryo Seiki Co., Ltd. This product is a rotating platform with a cable drum support that does not require a jack. It can accommodate drum outer diameters of φ400 to 1200mm, with a load capacity of 9.8kN. Additionally, the set contents are comprehensive. For more details, please contact us. 【Specifications】 ■ Weight: 56.8kg ■ Compatible drum outer diameter: φ400 to 1200mm ■ Compatible drum width: 300 to 750mm ■ Load capacity: 9.8kN *For more information, please refer to the PDF document or feel free to contact us.

The "IS-756LM II" is an electric hydraulic multi-work station angle processing machine that pursues excellent operability. Thanks to the stroke adjustment mechanism, the main spindle stroke can be adjusted continuously to suit various processing needs. It features a switch that allows you to toggle between auto-return or stop mid-stroke, making it convenient for delicate tasks such as positioning. 【Features】 ■ High Power: Maximum pressure of 28 tons, easily processes stainless steel angle materials. ■ Low Noise: Significant reduction in operating noise achieved through soundproofing measures. ■ High Precision Processing: Utilizes newly designed blades for high-precision processing with minimal burr formation. ■ Easy Operation: Simply step on the foot switch to operate, and attachments can be exchanged with a one-touch mechanism. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "Angle Master II Attachments" that we handle. Our lineup includes the "C756-II" for cutting processing, the "P756-II" for drilling processing, and the "B756-II" for bending processing. The "V756-II" allows for chamfering, V-notching, corner cutting, corner 45°, and corner 90° processing. 【Lineup】 ■C756-II (Cutter): Cutting processing ■P756-II (Puncher): Drilling processing ■B756-II (Bender): Bending processing ■V756-II (Notcher): Chamfering, V-notching, corner cutting, corner 45°, corner 90° processing *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-CP28S/IS-A75F" is a split-type angle processing machine that can be divided into a power unit and a frame. With a new motor, it has been further upgraded for high power, achieving a maximum pressure of 28 tons. It is compact and lightweight, with a total weight of 60 kg for the power unit and frame combined. 【Features】 ■ Easy to transport to the site: can be divided into power unit and frame ■ High power with a maximum pressure of 28 tons Maximum processing capacity: L75×75×t6 (angle material) ■ Compact and lightweight: total weight of 60 kg for power unit and frame combined *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. offers the "Angle Master Compact Attachments." We have a lineup that includes the cutting machine "IS-A75C," as well as the bending machines "IS-A75B" and "IS-A75V." The "IS-A75V" allows for a variety of processes including beveling, V-notching, corner cutting, corner 45°, and corner 90°. 【Product Lineup】 ■ IS-A75C (Cutter): Cutting processing ■ IS-A75B (Bender): Bending processing ■ IS-A75V (Notcher): Beveling, V-notching, corner cutting, corner 45°, corner 90° *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. handles the portable angle processing machines 'IS-CP13/IS-CP13L'. With the use of a footswitch (sold separately), the 'IS-CP13' allows for convenient operation with both hands, while the 'IS-CP13L' comes standard with a battery pack and charger. Various angle processing can be performed by changing attachments. 【Features】 ■ IS-CP13: Power Unit - Portable type that is easy to use whether stationary or handheld ■ IS-CP13L: Cordless Power Unit - Various angle processing is possible by changing attachments *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "Attachment for Angle Compos" that we handle. Our lineup includes the cutting tool "IS-A50C," the drilling tool "IS-A14P," and the bending tool "ISK-A50B II." The "IS-A50VI" can perform chamfering, V-notching, corner cutting, corner 45°, and corner 90° processing. 【Lineup】 ■IS-A50C (Cutter): Cutting processing ■IS-A14P (Puncher): Drilling processing ■IS-A50B II (Bender): Bending processing ■IS-A50VI (Notcher): Chamfering, V-notching, corner cutting, corner 45°, corner 90° *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. offers electric hydraulic mini punchers. We have the "IS-14MPS" with a maximum hole drilling capacity of φ14 and the "IS-20MPS" with a capacity of φ20. Both products have a maximum plate thickness of 6mm for SS400 and 4mm for SUS304. 【Product Lineup】 ■IS-14MPS ■IS-20MPS *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the electric hydraulic mini puncher, Stainless 6 'IS-106MPS', handled by Ikuriyoshi Precision Machinery Co., Ltd. This product has a maximum punching capacity of φ20, with a standard included punch die of φ14. Equipped with four plungers, it achieves an incredible power, capable of handling a maximum plate thickness of 10mm for SS400. 【Maximum Punching Capacity】 ■ Equivalent to SS400: φ20・t＝10mm ■ Equivalent to SUS304: φ20・t＝6mm ■ Throat Depth: 55mm *For more details, please refer to the PDF document or feel free to contact us.

At Ikuriyoshi Precision Machinery, we offer a series of electric hydraulic double-acting mini punchers. Our lineup includes the "ISK-MP15F" with speed control, as well as the "ISK-MP20F" and "ISK-MP920F." All products are equipped with a new type of stop plate featuring a quick guide. The viewing window allows for easy visibility of the marking line from either side. 【Product Lineup】 ■ ISK-MP15F (New Product 2021): Weight 8.0kg ■ ISK-MP20F (New Product 2021): Weight 10.7kg ■ ISK-MP2050F (New Product 2021): Weight 11.9kg ■ ISK-MP920F: Weight 11.9kg *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-BP20F" is an electric hydraulic double-acting mini punch with a quick guide and speed control. With the Ikura original hydraulic motor equipped with speed control, it is possible to adjust the motor's rotation speed using the pull length of the switch. By pulling lightly, the body vibration during startup is reduced, allowing for precise hole drilling. 【Features】 ■ Speedy & Energy-saving: Returns with the power of a spring ■ Smooth & Stress-free: Returns with hydraulic power during jamming ■ New stop plate with quick guide ■ Ikura original hydraulic motor with speed control *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. offers a cordless electric hydraulic double-acting puncher. Our lineup includes the "ISK-MP15LF," as well as the "ISK-MP20LF" and "ISK-MP2050LF." The "ISK-MP15LF" can perform 225 punches on a single charge. For more details, please feel free to contact us. 【Lineup】(Weight including battery pack) ■ ISK-MP15LF (7.8kg) ■ ISK-MP20LF (10.5kg) ■ ISK-MP2050LF (11.6kg) ■ ISK-BP20LF (12.8kg) *For more information, please refer to the PDF document or feel free to contact us.

The "ISK-LB30Li" is a cordless light polar with a super compact design gear head. Equipped with ultra-bright LEDs, it illuminates the punch and center pin of the drill position, enhancing work efficiency. Even if the battery runs out during drilling, the magnetic force remains active, allowing for safe battery replacement while keeping the hole position fixed, enabling immediate resumption of work and reducing the risk of dropping when used vertically or upside down. 【Features】 ■ Uses permanent magnets that do not consume battery power for adhesion ■ Safety-designed switch for the magnet ■ Equipped with ultra-bright LEDs ■ Super compact design gear head ■ Feed handle can be switched to the left or right *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the magnetic adhesion type Tap & Borer 'ISK-TPB3520' handled by Ikurayoshi Precision Machinery. It allows switching between drilling and tapping using a toggle lever. This excellent product can perform drilling, boring, and tapping all in one machine. Please feel free to contact us when you need assistance. 【Features】 ■ Drill: Maximum hole diameter φ13mm; thickness 20mm ■ Boring: Maximum hole diameter φ35mm; thickness 35mm ■ Tap: Maximum thread diameter M20; thickness 20mm *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the electric hydraulic flat bar processing machine 'FBB-II' handled by Ikuriyoshi Precision Machinery Co., Ltd. We offer two models: the "B type" for sheet metal and the "C type" for columns. As this is a made-to-order product, please check the delivery time. For more details, please feel free to contact us. 【Specifications (partial)】 ■ Weight: 48kg ■ Output: 400W ■ Capacity: - Bending angle 90° to 180° (maximum t6×50mm) - Bending R6 to 70 (6×25mm) R12 to 75 (9×50mm) ■ Power supply: AC100V 50/60Hz *For more details, please refer to the PDF document or feel free to contact us.

Yukiryo Seiki Co., Ltd. handles electric hydraulic rebar cutters. The maximum cutting capacity is equivalent to SD345, with the "IS-MC13E" cutting D13 in about 1.5 seconds and the "IS-MC16E" cutting D16 in about 2 seconds. Using long-lasting blades (super blades), it is a tough machine that is also strong in continuous cutting. 【Features】 ■ High-speed: The rod automatically returns at the stroke end, providing excellent workability. ■ Powerful: Uses long-lasting blades, making it a tough machine that is strong in continuous cutting. ■ Lightweight: Adopts a compact lightweight motor, making it easy to carry. *For more details, please refer to the PDF document or feel free to contact us.

The "Weld Roller ISK-WR125E" is an electric pipe rotation device for welding that comes standard with a weld ground that prevents the ground cable from tangling. It allows for easy one-touch pipe attachment. By rotating the pipe during welding, it achieves a stable finish at the weld joint. 【Features】 ■ Rotates the pipe for welding ■ Enables a stable finish at the weld joint ■ Easy one-touch pipe attachment ■ Standard included weld ground that prevents the ground cable from tangling *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-PS1000/ISK-PS1000B" is a welding pipe stand with foldable legs, making it convenient for transportation. It features a stable and robust stand that allows for safe adjustment work thanks to its flange. It is equipped with a high-rigidity head compatible with ball receivers. Additionally, we also offer the stainless steel ball receiver "ISK-PSB500," which is compatible with both steel and stainless steel pipes. 【Features】 ■ Stable and robust stand ■ Safe adjustment work can be performed with the flange ■ Foldable legs for convenient transportation ■ High-rigidity head compatible with ball receivers *For more details, please refer to the PDF document or feel free to contact us.

The "ISK-PC170E/ISK-PC320" is a high-speed clamp for welding pipes that features an extremely user-friendly attachment and detachment mechanism. When the feed switch lever is set to the fast feed side, it quickly and smoothly reaches the pipe. When the feed switch lever is set to the screw feed side, it securely tightens. We offer two models: the "ISK-PC170E" for pipes with a diameter of φ40 to 170mm, and the "ISK-PC320" for pipes with a diameter of φ110 to 320mm. 【Features】 ■ Easy operation for secure fixation ■ Simple centering and fine adjustments ■ Extremely user-friendly attachment and detachment mechanism ■ Gap gauge that allows for quick establishment of bevel gaps *For more details, please refer to the PDF document or feel free to contact us.

The "Flange Separator IS-FS1320" is a flange opener that can accommodate flanges from small to large diameters with just one unit. It features a step design to prevent uneven loading and can be adjusted according to the width of the flange. It can be used for flange opening tasks such as replacing gaskets in piping. As standard accessories, we provide an M20 bolt and nut set and a carrying case (made of steel). 【Features】 ■ Accommodates flanges from small to large diameters with just one unit ■ Step design to prevent uneven loading ■ Adjustable according to the width of the flange ■ Standard accessories: M20 bolt and nut set, carrying case (made of steel) *For more details, please refer to the PDF document or feel free to contact us.

We handle the manual hydraulic pipe crimping machine (water shut-off machine) "IS Series." The "IS-30AHS" features a fast feed mechanism that allows for quick access to materials. Its movable head makes it extremely user-friendly. In addition, we offer the "IS-50AH," which is equipped with an over-crimp prevention device, and the "IS-30AM," which is suitable for shortening construction periods and reducing costs in waterworks. 【Product Lineup】 ■IS-30AHS ■IS-50AH ■IS-30AM *For more details, please refer to the PDF document or feel free to contact us.

The "Sludge Vacuum Cleaner ISK Series" is a sludge recovery device that can be used while the machine is operating. With casters for easy mobility, it enhances work efficiency. We offer the "ISK-SVC4L II," which easily sucks up sludge accumulated at the bottom of the tank, and the "ISK-SVC10L II," which features a compact design with high mobility. 【Features】 ■ Easy operation like a vacuum cleaner ■ Air-driven, no power supply required ■ No consumable filters ■ Easy mobility with casters, improving work efficiency ■ Usable while the machine is operating *For more details, please refer to the PDF document or feel free to contact us.