育良精機 List of Products and Services

We would like to introduce our products, the "OS20RE" and "OS16RE." High-performance machines with quietness and functional beauty. They receive and supply materials to the rail quietly and reliably. Additionally, with the next material receiving device, after supplying one material to the rail, it receives the next material and quietly moves it to the standby position. 【Features】 ■ Oil type ■ Touch panel ■ Tip vibration stop ■ Synchronization device ■ Tool-less *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "OS38VRII・OS32VRII" is an automatic bar supply machine boasting a fully equipped 32-type with advanced functionality. It receives materials to be supplied to the rail and supplies them quietly and reliably. Additionally, with the next material receiving device, after supplying one material to the rail, it receives the next material as it moves and quietly shifts it to the standby position. 【Features】 ■ Oil type ■ Touch panel ■ Re-tightening tip stop ■ Intermediate stop ■ Synchronization device *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "OS51・45・38・32REIII" is a feeding machine for thick materials that combines ease of use with vibration-damping functionality. Adjusting the material shelf is a simple operation that only requires inputting the material diameter on a touch panel, allowing for a reduction in setup time. Additionally, the vibration-damping support for the feeding arrow further enhances vibration performance, improving quietness. 【Features】 ■ Oil type ■ Touch panel ■ Re-tightening tip vibration stop ■ Receiving device ■ Next material receiving device *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our "Parts Blow Cleaner." - Air-driven, no power supply required - Safe design without fans or motors - The PBC300 features a compact design with a width of 300mm, allowing for smooth movement even in narrow aisles lined with automatic lathes. When air-blowing oil and chips attached to parts, they are instantly suctioned and collected. 【Lineup】 ■ ISK-PBC300 (Width 300mm) ■ ISK-PBC500 (Width 500mm) *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

We would like to introduce our "Sludge Vacuum Cleaner." We offer two models: the "ISK-SVC4LII" with a collection filter size of φ150×H240mm (approximately 4L) and the "ISK-SVC10LII" with a size of φ200×H340mm (approximately 10L). These air-driven models do not require power and easily suction sludge that has accumulated at the bottom of the tank. 【Product Lineup】 ■ ISK-SVC4LII ■ ISK-SVC10LII *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

We would like to introduce our "Oil Cooler." It is compatible with cutting fluids that are oil-based or water-soluble, with a liquid temperature range of 5 to 45°C. By placing it under the feeding machine, it effectively utilizes dead space and contributes to increasing the production operating rate per floor area in the factory. 【Lineup】 ■ Inverter type "MRCC-07/MRCC-15" ■ ON/OFF type "MLCC-07/MLCC-15" *For more details, please refer to the PDF document or feel free to contact us.

• Cooling system

We would like to introduce our "Medium and High Pressure Coolant Systems." This horizontal design, unique to manufacturers of feeding machines, can be installed in the lower space of automatic bar feeders (Bar Top). In addition to contributing to increased production efficiency per floor area of the factory, it effectively removes chips, extends tool life, and enhances precision machining. 【Product Lineup】 ■ Medium Pressure Coolant System ・ ISK-MPC2M ■ High Pressure Coolant Systems ・ ISK-HPC7M ・ ISK-HPC10MY ・ ISK-HPC14MY *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our auxiliary equipment and processing machines, 'ISK-PBC300/ISK-PBC500'. It simultaneously sucks in air when the blow gun is squeezed. It operates on air drive without the need for power, featuring a safe design that does not use fans or motors. Please feel free to contact us if you have any inquiries. 【Features】 ■ Simultaneous suction when the blow gun is squeezed ■ Simultaneous suction when the foot pedal is pressed ■ Air drive that does not require power ■ Safe design that does not use fans or motors *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our accessory and processing machine, the 'ISL-20'. Comfortable operation at waist height even in narrow spaces. Suitable for shaft processing and long hours of unmanned operation. Please feel free to contact us when you need assistance. 【Specifications】 ■3.0M: Rod material capacity φ10-200 pieces, maximum weight 300kg ■4.0M: Rod material capacity φ20-100 pieces, maximum weight 1000kg *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our auxiliary equipment and processing machines, 'IH32/IH20'. Please feel free to contact us when you need assistance. 【Bar Material Capacity】 ■φ8-360 pieces, φ20-58 pieces, φ32-23 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

It features a sliding mechanism, making it suitable for setup changes and maintenance on the CNC lathe side. The material supply receiving device quietly and reliably supplies materials. 【SS65VRII/LS・SS51VRII Features】 ■ Oil-free ■ Touch panel ■ Tool-less ■ Receiving device ■ Next material receiving device ■ Feed arrow confirmation ■ Slide *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our automatic bar supply machines, 'OS20VRII/OS16VRII/OS12VRII'. It is possible to install high-pressure coolant and oil coolers manufactured by Ikura Seiki in the space between the stands. Additionally, it is equipped with a material supply and reception device that receives materials to be supplied to the rail and supplies them quietly and reliably. 【Features】 ■ Oil type ■ Touch panel ■ Synchronization device ■ Tool-less ■ Reception device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our automatic bar supply machine, the 'OS38VRII'. It is equipped with a material supply receiving device that receives materials to be supplied to the rail and supplies them quietly and reliably. Additionally, after supplying one material to the rail, it has a next material receiving device (PAT.) that receives the next material as it moves and quietly moves it to the standby position. 【Features】 ■ Receiving device ■ Next material receiving device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our automatic bar supply machine, 'SS110REII/SS90REII'. With the tip guide core adjustment device (PAT.), it is possible to adjust the core semi-automatically when inserting the tip guide into the CNC lathe. Additionally, the core height adjustment of the material shelf and primary feed V-rail is a simple operation that only requires inputting the material diameter on the touch panel, which reduces setup time. 【Features】 ■ Automatic shelf adjustment ■ Feed arrow movement confirmation device ■ Slide ■ Airless *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our automatic bar supply machine, the 'OS4RE'. The OS4REII utilizes years of experience and a unique system to ensure stable supply of ultra-thin materials without bending. The OS4REYII provides stable supply while reducing the load on bundled materials. It is a super-precision machine that accommodates further miniaturization. 【Features】 ■ Oil-operated ■ Touch panel ■ Synchronization device ■ Receiving device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our automatic bar supply machine, the 'OS12REII'. With the material supply guidance arm (PAT), it provides a stable supply of materials ranging from Φ1 to a maximum of Φ12 using the same supply system. 【Features】 ■ Oil-operated ■ Touch panel ■ Tip vibration stop ■ Synchronization device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to introduce our automatic bar supply machines, 'OS20RE/OS16RE'. After supplying the material to a single rail, the next material is received and quietly moved to the standby position with the next material receiving device (PAT.). The material supply receiving device ensures that materials are supplied quietly and reliably. 【Features】 ■ Receiving device ■ Next material receiving device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

Adjusting the material shelf is a simple operation that only requires inputting the material diameter on the touch panel, allowing for a reduction in setup time. With the feed arrow vibration support (PAT·P), vibration performance has further improved, enhancing quietness. 【Features】 ■ Receiving device ■ Next material receiving device ■ Numeric input ■ Center alignment device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

This catalog introduces welding machines equipped with lithium-ion batteries. We offer a lineup that includes the compact welding machine "ISK-Li160A," which has a balanced capacity, the large and robust machine "ISK-Li200A" with easy mobility thanks to its casters, and the "ISK-Li160TIG," which achieves high-quality welding on various base materials with its pulse function. Additionally, we have listed optional items such as torch bodies and collet chucks. Please use this information to assist in your product selection. [Contents] ■ Light Arc Arc Welding - ISK-Li160A - ISK-Li200A - Features ■ Light TIG TIG Welding - ISK-Li160TIG - Features ■ Optional Items *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine

This product is a welding pipe high-speed clamp that allows for quick securing of the bevel gap with an exceptionally user-friendly detachable structure. It can be firmly fixed with simple operation, and fine adjustments for centering can be easily made! The gauge alignment is stable with magnets, allowing for instant creation of uniform gaps. We offer the "ISK-PC320" for pipes up to 12 inches and the "ISK-PC170E" for pipes ranging from 1 1/4 to 6 inches. 【Features】 ■ Quickly secures the bevel gap ■ Exceptionally user-friendly detachable structure ■ Firmly fixed with simple operation ■ Easy fine adjustments for centering *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

The Super Mini Cutter 'ISK-MC13E/16E' is an electric hydraulic rebar cutter that automatically retracts the rod at the stroke end, providing excellent workability. It features a compact and lightweight design with a small, lightweight motor. Equipped with long-lasting blades, it is a tough machine that can handle continuous cutting. We also offer a lineup of electric hydraulic rechargeable cordless rebar cutters and electric hydraulic rebar cutters. 【Features】 ■ The rod automatically retracts at the stroke end for excellent workability ■ Uses long-lasting blades (Super Blade) ■ A tough machine that is strong in continuous cutting ■ Lightweight and compact design with a small, lightweight motor *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "ISK-RC16LE/19LE" is a powerful 36V electric hydraulic rechargeable rebar cutter that boasts overwhelming high power that rivals AC100V. Being cordless allows for a wide range of mobility, and it can rotate 360° even under load. We offer the "ISK-RC16LE," which can cut D16 rebar 225 times on a single charge, and the "ISK-RC19LE," which can cut D19 rebar 155 times on a single charge. 【Features】 ■ Cordless for a wide range of mobility ■ 360° rotation possible even under load ■ 36V rebar cutter ■ Overwhelming high power that rivals AC100V ■ Battery level indicator included *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "Cable Master Series" is a wire stripping machine born out of the desire to reduce waste. It features a cutting device that allows for easy peeling of insulation by widening the cuts. It is ideal for electrical contractors, recycling companies, and welfare workshops, as it makes stripping waste wires easy. We offer the lightweight, high-speed Cable Master Mini "ISK-DK150" and the versatile, high-power Cable Master "ISK-DK325CV." 【Features】 ■ Easy stripping of waste wires ■ Equipped with a safety guard ■ Cutting device that widens cuts for easier insulation peeling *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

This product is a cable winch with a load preset mechanism that automatically stops when the preset tension is exceeded. Equipped with an LCD display, it enhances visibility with large characters and indicators. It employs a mechanism that prevents reverse operation even in the unlikely event of a malfunction, and it stops operation if there is an abnormality in the input voltage. It also features a breaker switch that cuts off large currents due to overload, making it a reliable product for construction work. 【Features】 ■ Load preset mechanism that automatically stops when the set tension is exceeded ■ Breaker switch that cuts off large currents due to overload ■ Stops operation if there is an abnormality in the input voltage ■ Mechanism that prevents reverse operation even in the unlikely event of a malfunction *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Wedge Grip ISK-WG-1585" is a cable stopper that exerts a consistent gripping force regardless of the thickness of the wire. By setting it vertically on the rack, the process of moving the wire after extension becomes smooth. It can accommodate diameters from φ15 to 85mm with a single unit, can maintain an open state, and the clamp arm is buckle-type, allowing for easy and reliable opening and closing. 【Features】 ■ Exerts a consistent gripping force regardless of wire thickness ■ Setting it vertically on the rack allows for smooth wire movement after extension ■ Accommodates diameters from φ15 to 85mm with a single unit ■ Can maintain an open state ■ The clamp arm is buckle-type, making it easy and reliable to open and close *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Light Arc ISK-Li200A" is an arc welding machine equipped with a lithium-ion battery that features a battery management system (BMS) to prevent battery degradation by providing warnings for over-discharge and over-charge, temperature monitoring, and control of the charging circuit. It significantly reduces standby power consumption. The output current is 200A, making it a high current and high capacity model. It comes with convenient casters for mobility and allows for charging without memory drop. 【Features】 ■ Equipped with a safety circuit (BMS) ■ Significantly reduces standby power consumption ■ Output current of 200A, high current and high capacity model ■ Convenient casters for mobility ■ Allows for charging without memory drop *For more details, please refer to the PDF document or feel free to contact us.

• Lithium-ion battery

The "Rapid Glass Goggles ISK-RGG6" is an automatic darkening welding helmet equipped with a standard light-sensitive LED light and a high-performance 4-sensor filter. It provides a wide and bright field of view for comfortable work. The air holes inside the goggles prevent the lenses from fogging during use. Designed with the safety of the operator in mind, it features a hard mask compatible with dust masks, reducing the risk of burns from spatter with flame-retardant fabric. 【Features】 ■ Compatible with dust masks/helmets ■ Comfortable work with a wide and bright field of view ■ Anti-fog design ■ The darkening filter has received the highest rating in all categories of the European standard EN379 as an all-in-one model *For more details, please refer to the PDF document or feel free to contact us.

• Glasses and goggles

The "Power Ball Mini ISK-PB203M" is an inverter-controlled cable intermediate feeding device suitable for narrow installation routes and tight spacing between multi-tier racks. It reduces the burden on racks and cables caused by excessive pulling. It easily feeds main cables with high grip strength, allowing for efficient extension work when used in conjunction with a winch. Additionally, we offer models "ISK-PB203" and "ISK-PB403" with overload prevention features. 【Features】 ■ Suitable for narrow installation routes and tight spacing between multi-tier racks ■ Reduces the burden on racks and cables caused by excessive pulling ■ Easily feeds main cables with high grip strength ■ Allows for efficient extension work when used in conjunction with a winch ■ Can accommodate both 100V and 200V by switching the inverter *For more details, please refer to the PDF document or feel free to contact us.

• Inverter

The "Cordless Puncher ISK-MP20LF" is a 36V electric hydraulic rechargeable double-action puncher. It boasts overwhelming high power that rivals AC100V. With a hybrid full double action, it quickly returns using spring power during normal operation, and returns using hydraulic power during jamming, eliminating stress. It can punch 200 times on a single charge. 【Features】 ■ Overwhelming high power that rivals 100V ■ Lightweight at 10.5kg ■ Hybrid full double action ■ No stress during jamming as it returns using hydraulic power ■ Can punch 200 times on a single charge *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

The "Light Arc ISK-LS403S" is a multi-voltage compatible machine with improved durability and maintenance features. It is less susceptible to static electricity, lightning, voltage fluctuations, and electrical noise from other machines, protecting the main unit from malfunctions and failures, making it an EMS-targeted product. With inverter-controlled DC output, stable welding is possible, achieving low power consumption. 【Features】 ■ Improved durability and maintenance ■ EMS-targeted product ■ Stable welding possible with inverter-controlled DC output ■ Achieves low power consumption *For more details, please refer to the PDF document or feel free to contact us.

• inverter

The "Light Borer ISK-LB30Li" is a cordless rechargeable magnetic borer that requires no power supply and can be used in various work environments. It can drill holes ranging from Φ8 to 30mm and is suitable for plate thicknesses of 6 to 25mm. It uses a permanent magnet that does not consume battery power for suction, allowing for safe battery replacement during drilling operations even if the battery runs out, enabling immediate resumption of work while maintaining the hole position. 【Features】 ■ The number of holes drilled on a full charge is 25 holes for Φ18×t16mm, making it one of the strongest in its class. ■ The punch, cutting edge, and center pin for hole positioning are illuminated, enhancing work efficiency. ■ A compact gear head allows drilling from a position as close as 23mm to the wall. ■ Tool-free blade replacement is easy and quick. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "ISK-BP20LF" is a cordless, barrier-free, electric hydraulic rechargeable double-acting puncher. It allows for hole drilling while avoiding obstacles by adjusting the head angle according to the site conditions. It is effective for work in narrow spaces such as near ceilings and walls. The motor section can rotate 360° even when not under load, maintaining an easy-to-grip trigger position for drilling from various angles. 【Features】 ■ Capable of drilling while avoiding obstacles ■ Achieves easy and speedy alignment ■ Can drill from a position 30mm from the wall ■ Smooth operation with hybrid complete double action *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

The "ISK-DJ10TS" is a 10-ton jack with a weight of 87 kg per leg. It comes with casters for easy movement and features a lever operation for simple locking. The lifting height is 600 mm, the drum diameter ranges from φ1,600 to 2,800 mm, and the shaft specifications are φ101.6×2,500 mm. 【Specifications】 ■ Lifting capacity: 98 kN (10 tons) ■ Lifting height: 600 mm ■ Drum diameter: φ1,600 to 2,800 mm ■ Shaft: φ101.6×2,500 mm *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Mini Winch CW-M500S" is equipped with a built-in circuit protector that stops the motor during overload to prevent tension overrun. Its compact and lightweight design allows for installation in tight spaces such as cable racks. Considering the use of steel wire, the drum is made of cast iron. It features an instantaneous brake mechanism to prevent accidents caused by drum reversal, and the base can be removed to attach an anchor. Additionally, we offer a variety of cable winch models in the Ikura series. 【Features】 ■ Compact high power ■ Installable in tight spaces ■ Equipped with instantaneous brake mechanism ■ Drum made of cast iron ■ Base removable for anchor attachment *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Rapid Glass Goggles ISK-RGG2HS" is a goggle-type auto-darkening welding helmet designed to be worn over glasses. You can select the appropriate mode based on your work requirements. Additionally, it features a high-frequency sensor mode (RF) that detects high frequencies during welding to darken the lens. This is particularly useful in situations where light is weak and difficult for the light sensor to detect. 【Features】 ■ Compatible with dust masks/helmets ■ Can be worn directly over glasses ■ Wide field of view for comfortable work ■ Effective in tight spaces ■ Converts to protective glasses when powered off *For more details, please download the PDF or contact us.

• Other safety and hygiene products

The "Rapid Glass ISK-RG40W" is an automatic darkening welding helmet that can accommodate everything from hand-held welding to low current TIG welding. In addition to a light sensor, it is equipped with a high-frequency sensor. You can select the appropriate mode according to the work being performed. The high-frequency sensor detects the high frequency during welding and darkens the lens, making it effective in situations where the light is weak and difficult for the light sensor to detect. 【Features】 ■ One of the lightest in its class at 490g ■ Grinder mode function ■ Low current compatibility (TIG, grinder, coated arc, MIG/MAG) ■ Side window type for a wide field of view and comfortable work *For more details, please download the PDF or contact us.

• Other safety and hygiene products

The "ISK-NS16AN" is a light needle that achieves an 80% reduction in vibration thanks to the ergonomic grip developed from field experience. (Compared to our products when the rubber part is not attached) Additionally, it prevents dust intrusion with a filter-equipped joint, protecting the interior of the needle. The wire braid air hose prevents stretching of the hose and protects against external damage such as preheating during welding and cuts. 【Features】 ■ Ultra-lightweight and compact type ■ Improved durability of the hammer part. Meets the demands of hard work ■ Suitable for removing welding slag, rust/paint stripping, and roughening concrete *For more details, please download the PDF or contact us.

• Other cutting tools

The "PT-30WDL" is a portable transformer suitable for indoor use, designed to resolve power shortages in electrical products and address voltage drop issues. It is equipped with safety features for three types of hazards: leakage (insulation degradation), short circuit, and overload (excessive use). 【Features】 ■ Step-down only ■ Equipped with a leakage circuit breaker (Rated current: 15A, rated sensitivity current: 15mA, maximum operating time: 0.1 seconds) *For more details, please download the PDF or contact us.

• Transformers

The ISK-IAP151/202 is a compact and lightweight inverter-controlled air plasma cutting machine suitable for on-site work. It is equipped with safety mechanisms to prevent incorrect operation, such as pressing the wrong switch or making mistakes during the replacement of electrodes and tips. 【Features】 ■ ISK-IAP151 - Sharp cutting performance with energy-saving design ■ ISK-IAP202 - Maximum cutting thickness of 9mm with an input current of 20A *For more details, please download the PDF or contact us.

• Plastic processing machines (cutting and rolling)

The "ISK-TPB3520" is a magnetic suction type tap and borer capable of drilling and tapping. It is a versatile tool that functions as a borer, drill, and tap all in one. During boring, a water-soluble cutting fluid is automatically dripped in the right amount in response to the lever's movement. Additionally, it features a built-in clutch that allows for forward and reverse rotation with just the handle operation during tapping. 【Features】 ■ Easily interchangeable with one touch ■ Powerful compact magnet that securely holds during use ■ Automatic dripping of cutting fluid ■ Forward and reverse clutch ■ Dedicated tap holder capable of processing metric and Whitworth threads *For more details, please download the PDF or feel free to contact us.

• drill

The "Weld Roller ISK-WR125" is an electric pipe rotation device that allows for stable finishing of welds by rotating the pipe during welding. The rotation speed can be easily switched between four levels. The pipe can be fixed with a one-touch mechanism. A standard accessory, the weld ground, prevents the ground cable from tangling. 【Features】 ■ Rotates the pipe for welding ■ Enables stable finishing of welds ■ Four levels of rotation speed ■ One-touch pipe fixation ■ Comes with a foot switch *For more details, please download the PDF or feel free to contact us. *Prices have been revised since February 2023. There may be differences from the listed prices.

• Power tools

"Light Arc" is an inverter-controlled direct current arc welding machine designed for EMS countermeasures. It is equipped with various welding functions and achieves low power consumption. Additionally, stable welding is possible due to inverter control and direct current output. It is resistant to static electricity, lightning, voltage fluctuations, and electrical noise from other machines, protecting the main unit from malfunctions and failures. 【Features】 ■ EMS countermeasure product ■ Enables stable welding ■ Achieves low power consumption ■ Compact and lightweight ■ Equipped with a breaker switch *For more details, please download the PDF or feel free to contact us.

• Welding Machine

The "Power Ball" is a robust, continuously variable cable feeder with an all-gear structure. The opening and closing of the ball can be done quickly and easily with a ratchet wrench, and the feed speed can be adjusted by turning the variable speed dial. Additionally, the forward and reverse switching can be done at your fingertips, making it suitable for use in conjunction with a winch. 【Features】 ■ Robust all-gear structure ■ Easy to use with 100V ■ Ideal for use with a winch *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "Light TIG ISK-LT201AD2/ISK-LT201F22" is a full digital control AC/DC pulse TIG welder compatible with both 100V and 200V. It achieves stable arc output with full digital control and can be adjusted in 1 amp increments. It can be used with both 100V and 200V, making it easy to secure power for on-site work, and it automatically switches output according to the input voltage. It incorporates measures to suppress noise emitted from the welder and is also resistant to noise from other equipment. The ISK-LT201AD2 is an AC/DC type weighing 13kg, while the ISK-LT201F2 is a DC type weighing 11kg, achieving compactness and lightweight design. 【Features】 ○ Pulse TIG welding compatible → Pulse frequency adjustable from low speed 0.2Hz to high speed 500Hz ○ Memory function included ○ Up-slope and down-slope control → Reduces defects at the start and end of welding, enabling uniform welding ○ Easy and detailed settings → Easy and detailed settings for various configurations with a single dial For more details, please contact us or download the catalog. *Prices have been revised since February 2023. The listed prices may differ.

• Welding Machine