ATI Worldwide LLC List of Products and Services

Accurate Technologies Inc. (ATI) has been a leading independent supplier of high-performance measurement and control system tools and software solutions since 1991. Today, we provide advanced development tools that assist our customers in bringing high-quality products to market. This catalog features a variety of products, including the versatile engineering tool for calibration measurement "VISION," the innovative network analysis solution "CANLab," and the "CANverter," which easily transmits and receives signals in vehicle networks. [Featured Products] ■ VISION ■ Rapid Control Development Solutions ■ No-Hooks On Target ■ CANLab ■ CANverter, among others *For more details, please refer to the PDF document or feel free to contact us.

LambdaCANp is a high-speed measurement sensor for lambda, A/F ratio, φ, and %O2. It achieves excellent measurement range, accuracy, and fast response. All sensors are calibrated at the time of shipment, and the calibration information is stored in a memory chip inside the sensor's connector. 【Features】 ■ Supports a wide range (λ, A/F, φ, %O2 measurement) ■ Achieves excellent measurement range and accuracy ■ Programmable for various fuel types ■ Measurement values are output directly to the CAN bus (analog output option available) ■ Test cell measurement, in-vehicle measurement *For more details, please refer to the PDF document or feel free to contact us.

"FastTemp" is a thermocouple module that outputs ultra-high bandwidth temperature measurements using a standard K-type grounded thermocouple probe. It enables the display of high-speed and dynamic temperature information that was previously impossible with conventional thermocouple amplifiers. This product is particularly suitable for measuring the temperature of exhaust gases from engines. 【Features】 ■ Fast response (less than 50 milliseconds) ■ Uses standard K-type thermocouples ■ Measurement range: -60° to 1370°C ■ Internal cold junction compensation ■ High-speed and standard speed output *For more details, please refer to the PDF document or feel free to contact us.

NH3CAN is a high-speed measurement sensor for NH3 (ammonia) in the after-treatment systems of diesel and lean-burn engines. It features ease of use, processing speed, compact size, and robustness. No wiring or pumps are required for sampling, making it easy to install and ideal for on-board measurement. 【Features】 ■ NH3 measurement sensor ■ Engine type: Lean combustion (λ ≧ 1), Diesel ■ Response time: Less than 1000ms ■ Measurement output: Direct CAN output (analog output available as an option) ■ Compact, can be directly mounted on the exhaust pipe *For more details, please refer to the PDF document or feel free to contact us.

The "NH3 CAN Module" is a CAN output device for measuring NH3 (ammonia) in the exhaust of diesel and other lean-burn engines. It aids in the development of SCR (Selective Catalytic Reduction) systems and compensates the exhaust NOx (nitrogen oxides) sensor in response to NH3 cross-sensitivity. Originally designed as a measurement tool, it can be easily integrated into engine or aftertreatment regulatory strategies. 【Features】 ■ For diesel and lean-burn engines ■ NH3 measurement range: 0–3000 ppm ■ For measuring dilute lambda (λ > 1) ■ CAN communication ■ Environmentally sealed *For more details, please refer to the PDF document or feel free to contact us.

The "NOxCANg (Type G) NOx/λ/O2 CAN module" is a multifunctional device that can comprehensively measure NOx, λ, and O2. It uses ceramic sensors installed in the engine's exhaust system and communicates various sensor parameters via its own CAN port. Although originally designed as a measurement tool, it can be easily integrated into engine or after-treatment regulatory strategies. 【Features】 ■ Recommended for diesel engines ■ Suitable for lean to stoichiometric regions ■ CAN communication ■ Recalibration (zero or span) possible ■ Sensor with memory chip *For more details, please refer to the PDF materials or feel free to contact us.

The "NOxCANt (Type T) NOx/λ/O2 CAN module" is a multifunctional device that can comprehensively measure NOx, λ, and O2. Since it is a sensor that is directly attached to the engine's exhaust system, no auxiliary equipment such as pumps is required, making it ideal for in-vehicle measurements. The measurement values are output via CAN, allowing compatibility with various data loggers. 【Features】 ■ Measurement sensors for NOx, λ, A/F, and O2 ■ Fuel types: H:C, C, and N:C (ratios are variable) and H2 ■ Response time: less than 1000 ms ■ Measurement values: direct CAN output (analog output available as an option) ■ Compact and can be directly mounted on the exhaust pipe ■ Suitable for spark ignition engines *For more details, please refer to the PDF document or feel free to contact us.

This catalog features measuring instruments handled by ATI Japan. We offer a wide range of products, including the high-speed measurement Lambda analyzer "Lambda 5220" and the fast response thermocouple module "FastTemp." Additionally, we provide examples of system connections. 【Featured Products】 ■Lambda 5220 ■LambdaCAN ■FastTemp ■NH3 5250 ■NH3 CAN ■NOxCANg (Type G) NOx/λ/O2 CAN module ■NOxCANt (Type T) NOx/λ/O2 CAN module ■NOx & NH3 analyzer *For more details, please refer to the PDF document or feel free to contact us.

This catalog is the comprehensive catalog of ECM Corporation. It features a wide range of products, including the high-speed measurement lambda analyzer "Lambda 5220" and the high-response thermocouple module "FastTemp." Additionally, examples of system connections are also introduced. 【Featured Products】 ■ Lambda Sensor: LambdaCANp ■ CO/CO2 Sensor: CO/CO2CAN ■ NOx Sensor: NOxCANt, NOxCANf, NOxCANg ■ NH3 Sensor: NH3CAN ■ EGR Analyzer: EGR5230 ■ Exhaust Particulate Matter Measurement: pmCAN ■ High-Speed Response Thermocouple: FastTemp ■ Onboard Exhaust Measurement Device: miniPEMS, miniPEMS2 *For more details, please refer to the PDF document or feel free to contact us.

The "miniPEMS" is an onboard exhaust gas measurement device that uses zirconia sensors. This product can measure exhaust gas components directly and precisely without suction. Furthermore, the measurement module can be freely combined with up to four units. (For example: Lambda, NOx, NH3, CO/CO2, exhaust temperature, etc.) Additionally, it is lightweight and compact, weighing less than 5 kg including the battery (Li-ion). 【Features】 ■ Affordable with no need for expensive additional investments ■ Measurement modules can be freely combined up to four ■ Exhaust gas components can be measured directly and precisely without suction ■ Equipped with GPS and CAN logger (no PC needed during testing) ■ Each sensor is equipped with a memory chip for customer recalibration *For more details, please refer to the PDF document or feel free to contact us.

ATI (Accurate Technologies Inc) has been a leading independent supplier of high-performance measurement and control system tools and software solutions since 1991. Today, we provide advanced development tools to help our customers bring high-quality products to market. This catalog features a variety of products, including the versatile engineering tool for calibration measurement "VISION," the innovative solution for network analysis "CANLab," and the "CANverter," which easily sends and receives signals in vehicle networks. [Featured Products] ■VISION ■Rapid Control Development Solutions ■No-Hooks On Target ■CANLab ■CANverter, among others *For more details, please refer to the PDF document or feel free to contact us.

The "miniPEMS" is an onboard exhaust gas measurement device that uses zirconia sensors. This product can measure exhaust gas components directly and precisely without suction. Furthermore, the measurement module can be freely combined with up to four units. (For example: Lambda, NOx, NH3, CO/CO2, exhaust temperature, etc.) Additionally, it is lightweight and compact, weighing less than 5 kg including the battery (Li-ion). 【Features】 ■ Affordable with no need for expensive additional investments ■ Measurement modules can be freely combined with up to four units ■ Capable of direct and precise measurement of exhaust gas components without suction ■ Equipped with GPS and CAN logger (no PC needed during testing) ■ Each sensor is equipped with a memory chip, allowing for recalibration by the customer *For more details, please refer to the PDF document or feel free to contact us.

The CO/CO2CAN is a zirconia-based exhaust gas sensor. 【Features】 ■ Measurement sensors for CO, CO2, λ, A/F, and O2 ■ Fuel types: H:C, O:C, and N:C (ratios are variable) and H2 ■ Response time: less than 200ms ■ Measurement values: direct CAN output (with optional analog output) ■ Compact and can be directly mounted on the exhaust pipe For more details, please refer to the catalog or feel free to contact us.

The NOxCANg (Type G) NOx/λ/O2 CAN module is a multifunctional device that can comprehensively measure NOx, λ, and O2. Since it is a sensor directly attached to the engine's exhaust system, no auxiliary equipment such as pumps is required, making it ideal for in-vehicle measurements. The measurement values are output via CAN, allowing compatibility with various data loggers. 【Features】 ■ Measurement sensors for NOx, λ, A/F, and O2 ■ Fuel types: H:C, C, and N:C (ratios are variable) and H2 ■ Response time: less than 1000 ms ■ Measurement values: direct CAN output (analog output available as an option) ■ Compact and can be directly mounted on the exhaust pipe ■ Suitable for engines operating on the lean side of stoichiometric (for diesel and gas turbine engines) *For more details, please refer to the PDF document or feel free to contact us.

[EGR Rate Measurement Device] Measuring the EGR rate is a very important parameter for NOx suppression. Traditionally, measuring the EGR rate has been complex and difficult. The EGR5230 uses two λ sensors and a pressure sensor to measure and output the EGR rate. By installing a λ sensor and a pressure sensor on both the intake manifold side and the exhaust manifold side, the EGR rate is measured. The system configuration is simple, and the response time is less than 1 second. In addition to the EGR rate, other parameters that can be measured by the λ sensors and pressure sensors can also be directly output to the CAN bus, and can be output as an analog signal (0-5V).

VISION 7 is an innovative and powerful all-in-one platform software that combines ECU flashing, calibration, data collection, and data analysis into a single solution. ● Supports large data volumes It features a 64-bit architecture that leverages the established VISION API and post-processing capabilities, allowing it to handle large datasets and future development challenges. ● Excellent extensibility The VISION toolkit provides additional functionalities based on user requirements, ranging from dedicated data collection and the VISION Data Analyzer (VDA) package to ECU calibration, and ultimately rapid prototyping of module functions through the optional No-Hooks/OnTarget toolkit.