鈴商 List of Products and Services

The "CS710" is a glove that features a special anti-slip layer made of foam nitrile rubber, which exhibits excellent anti-slip properties against oil and water. Since it is coated with nitrile rubber, it is resistant to oil and has excellent abrasion resistance. If you are looking for gloves to use during tasks that involve handling oil, please feel free to contact us. 【Materials】 ■ Resin part: Nitrile rubber ■ Fiber part: Polyester *For more details, please download the PDF or feel free to contact us.

• Work gloves

"Chemical protective gloves made of butyl rubber" are suitable for handling chemicals such as ketones and alcohols. Available sizes are 9/L and 10/XL, packaged in quantities of 10 pairs (1 pair x 10). They feature a special anti-slip processing with particulate texture. Please contact us if you have any requests. 【Features】 ■ Liner-free type ■ Permeation resistance (based on JIS T 8116): Class 1 ■ Total length 35 cm *For more details, please download the PDF or feel free to contact us.

• Work gloves

We would like to introduce our "Fluororubber Chemical Protective Gloves." Available sizes are 9/L and 10/XL, packaged in sets of 10 pairs (1 pair × 10). These gloves comply with JIS T 8116 and are suitable for tasks involving chemicals such as oil and toluene. Please contact us if you have any requests. 【Features】 ■ No lining type ■ Permeation resistance (based on JIS T 8116): Class 1 ■ Total length 35 cm *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "CZ900" is a disposable inner glove that excels in permeability resistance. It is made by sandwiching EVOH between nylon, and its permeability resistance based on JIS T 8116 is classified as Class 2. This powder-free, ambidextrous type is available in packs of four. Please contact us if you have any requests. 【Specifications】 ■ Size: Free ■ Total length: 41 cm ■ Packaging quantity: 40 bags ■ Materials: Nylon, EVOH *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "A0170" is a palm-coated glove that uses conductive copper sulfide thread for static electricity prevention. It features a foam polyurethane coating on the palm, providing excellent anti-slip properties. Additionally, it is highly breathable. We also offer a simple packaging type containing 10 pairs, so please contact us if you are interested. 【Sizes】 ■XS: Total length 19.5 cm ■S: Total length 21 cm ■M: Total length 22 cm ■L: Total length 23 cm *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "A0161" is an anti-static line top glove that uses conductive copper sulfide thread for electrostatic protection. It features a foam polyurethane coating on the fingertips, providing a non-slip effect. The use of long fibers helps reduce dust generation from the gloves. We also offer a simple packaging type containing 10 pairs, so please contact us if you are interested. 【Sizes】 ■S: Total length 18.5 cm ■M: Total length 19 cm ■L: Total length 20 cm *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "A0150" is a non-coated type glove that uses copper sulfide conductive thread for static electricity prevention. Due to the use of long fibers, it suppresses dust generation from the gloves. Available in three sizes: S, M, and L, with a packaging quantity of 240 pairs (10 pairs x 24). Please contact us if you have any requests. 【Features】 ■ Seamless gloves ■ Low dust generation ■ Ambidextrous *For more details, please download the PDF or feel free to contact us.

• Work gloves

"Chemistar Finger" is a glove coated with foamed polyurethane on the fingertips. It uses long fibers to suppress dust generation from the gloves. It is a unisex type available in two sizes: M and L. Please contact us if you have any requests. 【Specifications (partial)】 ■ Resin part: Polyurethane ■ Fiber part: Polyethylene, Polyurethane, and others *For more details, please download the PDF or feel free to contact us.

• Work gloves

"Chemist Fit" is a non-coated type of glove that can also be used as an inner layer. It uses long fibers to suppress dust generation from the gloves. It is a unisex type available in three sizes: S, M, and L. Please contact us if you have any requests. [Features] ■ Seamless gloves ■ Low dust generation ■ Unisex *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "DS015 Chemister Wristband" is a product that achieves high elasticity through a textured knitting method. By using long fibers, it suppresses dust generation from the wristband. The use of smooth surface fibers results in a silky texture. Please contact us if you have any inquiries. 【Features】 ■ Free size ■ Low dust generation ■ Ambidextrous *For more details, please download the PDF or feel free to contact us.

• Work gloves

"B0910" is a low-dust nylon inner glove that produces minimal dust. Available in packs of 20, with a total of 24 bags per carton, in sizes M and L. They can be used interchangeably for both left and right hands. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Size ・M: Total length 16.5 cm ・L: Total length 18 cm ■ Packaging quantity: 24 bags ■ Materials: Nylon, polyester, and others *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "Toyokonekta" has a larger effective cross-sectional area at the hose connection compared to bamboo joints, which can reduce pressure loss and is expected to lower power consumption in factory equipment piping fittings. By preventing hose disconnection and fluid leakage, it helps avoid production troubles, enabling efficient and stable production. Reducing troubles can also decrease the time and costs associated with maintenance. Additionally, since the hose connection has the same diameter as the hose, it offers good insertability and can be easily installed by anyone. 【Features】 ■ Prevention of production troubles ■ Realization of standardized work ■ Reduction of piping work time ■ High energy-saving effect *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Toyokonekta/Toyokonekta F" is a connector for food, beverage, and pharmaceutical piping. The insertion parts of the hose and fittings are the same size. Inserting the fittings, which has been a struggle in the past, can now be done easily and quickly by warming the hose. Additionally, the need for troublesome band alignment, torque management, and re-tightening work is eliminated, making installation simple and allowing for standardization of work processes. 【Features】 ■ Easy installation with smooth fitting insertion ■ Hygienic design that minimizes liquid pooling ■ No need for re-tightening, reducing maintenance ■ Shortened piping work time and standardization of tasks ■ Easy installation on-site *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Toyokonekta" is a connector that securely fixes hoses with its special sleeve structure, eliminating fluid leaks and hose disconnections. Since it uses a bag nut tightening method, there is no need for troublesome band alignment, torque management, or re-tightening work, making installation easy and allowing for standardization of work processes. Additionally, it prevents piping troubles such as leaks and disconnections caused by vibrations, making preventive maintenance during earthquakes and recovery work after disasters easier. 【Features】 ■ Increased production efficiency by reducing leaks and disconnections ■ Reduced maintenance with no need for re-tightening ■ Shortened piping work time and standardization of tasks ■ Hygienic structure that minimizes liquid pooling ■ Identification of five types of piping is possible (only for TC3-F) *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Toyokonekta" is a bag nut and clamp-type connector. When the arm is closed, it automatically locks, eliminating the worry of the arm opening and the joint coming loose during connection. The connection with the hose also features a special structure that prevents leaks and hose disconnection. Additionally, it is made of stainless steel, making it resistant to rust and hygienic, and some parts can be reused with replacement. Please feel free to contact us when you need assistance. 【Features】 ■ Easy installation with smooth joint insertion ■ Safety and peace of mind with leak and disconnection prevention ■ Hygienic design that minimizes liquid pooling ■ Reduced maintenance with no need for re-tightening ■ Shortened piping work time and standardization of tasks *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Toyokonekta" is a connector that allows for easy installation with a smooth insertion of the joint. The hook part of the clamp engages with the groove of the joint body, preventing hose disconnection. This enhances safety during work and reduces defective losses due to production troubles. Additionally, since the insertion parts of the hose and joint are the same size, inserting the joint, which has been a struggle in the past, can now be done easily and quickly, even by warming the hose. 【Features】 ■ Easy installation with smooth joint insertion ■ Safety and peace of mind with leak prevention ■ Hygienic as fluid residues are less likely to accumulate *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

We would like to introduce our "fitting crimp products." The nipple shape is designed to minimize liquid pooling, making it hygienic. Additionally, it is a product registered with the FDA (U.S. Food and Drug Administration) (Toyoshi Silicone Hose Series), ensuring safety and peace of mind. The material consists of SUS316L for the fitting nipple and SUS304 for the fitting cover. Please feel free to contact us if you have any requests. 【Features】 ■ Hygienic design with a nipple shape that minimizes liquid pooling ■ Safe with a cover and nipple shape that prevents hose rupture ■ Registered with the FDA (U.S. Food and Drug Administration) (Toyoshi Silicone Hose Series) for safety and peace of mind *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Camlock 633 Series Twin Lock Type" is an arm-type fitting for factory equipment piping. The arm can be easily locked, preventing unexpected loosening or disconnection, ensuring safety and peace of mind. There is no hassle of tying the arm with wire or string to prevent disconnection, which improves work efficiency. Additionally, we offer a selection of fitting materials including aluminum alloy, stainless steel, polypropylene, and bronze, allowing you to choose according to your application and fluid. 【Features】 ■ Significantly improved safety ■ Enhanced work efficiency ■ Four types of fitting materials *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Camlock 633 Series" is an arm-type fitting designed for factory equipment piping, featuring a unique twin-cam arm shape that employs a two-stage tightening method to prevent unexpected disconnection of joints. Even if the cam arm loosens due to vibrations or other influences, the twin cam arms of the cam lock stop at 45°, securely holding the adapter and preventing fluid leakage. Additionally, the attachment and detachment operation is simple: just insert the adapter into the coupler and pull the cam arm of the coupler. This operation can be completed in just a few seconds, significantly reducing work time compared to threaded joint methods. 【Features】 ■ Prevents unexpected disconnection due to vibrations with a twin cam structure ■ Dramatically saves time ■ Cost reduction ■ High safety ■ Maintains the quality of transported products *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

We would like to introduce our "Hose Band W Safety Nipple Set." This is a specially designed nipple by a hose specialist manufacturer that is energy-efficient and considerate of hoses, featuring a shape that minimizes troubles. Compared to commercially available general bamboo joints, it has a larger effective cross-sectional area (hole diameter), which reduces pressure loss, thus helping to lower power consumption. 【Features】 ■ Low pressure loss and energy-saving ■ Dedicated nipple for Toyox hoses, making it easy to insert the hose *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

We would like to introduce our "Hose Band W Safety." This product features a structure where an O-ring inside the band presses against the outer circumference of the hose, continuously maintaining pressure as it adapts to any deformation of the resin, thus preventing fluid leakage and hose disconnection. Additionally, it reduces the need for re-tightening, thereby minimizing maintenance. Please feel free to contact us if you have any inquiries. 【Features】 ■ Reduces troubles by preventing leaks and disconnections for an extended period, increasing production efficiency. ■ Reduces the need for re-tightening, minimizing maintenance. ■ Prevents injuries at the band tip, ensuring safety (with safety cap). *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

We would like to introduce our 3-flute/4-flute carbide ball end mills 'BBEM330/430'. Due to the multi-flute design, it allows for increased feed rates, achieving high-efficiency machining. With ALCrN-based coating, it is suitable for not only mold steel but also stainless steel and difficult-to-cut materials. Additionally, it can process materials with a hardness of up to HRC52. Please feel free to contact us if you have any inquiries. 【Product Lineup (Partial)】 ■BBEM330-005R ■BBEM430-010R ■BBEM430-015R ■BBEM430-020R ■BBEM430-025R *For more details, please download the PDF or feel free to contact us.

• End Mills

We would like to introduce our 4-blade carbide chamfer cutter 'GSCHM'. With its optimized groove shape, it demonstrates excellent chip evacuation. The 4 blades allow for faster feed rates, achieving high-efficiency machining. Additionally, it can be used on a variety of materials, from general steel to difficult-to-cut materials and non-ferrous metals. Please feel free to contact us if you have any inquiries. 【Lineup (partial)】 ■GSCHM2X90 ■GSCHM3X90 ■GSCHM4X90 ■GSCHM6X90 ■GSCHM8X90 *For more details, please download the PDF or feel free to contact us.

• cutter

The "AE-CPR4-H" is a high-hardness steel ultra-hard end mill of the long neck radius type. The new gash specification with a spiral shape from the center to the corner radius improves chip evacuation and prevents chip jamming. With a 4-flute design, it achieves high-efficiency machining. Please feel free to contact us if you have any requests. 【Features】 ■ 4-flute design for high-efficiency machining ■ New gash specification with spiral shape ■ Excellent corner radius accuracy ■ Excellent shank accuracy *For more details, please download the PDF or feel free to contact us.

• End Mills

The "AE-LNBD-H" is a carbide end mill for high-hardness steel that corresponds to h4 tolerance (0/-0.004). By thickening the center part, it suppresses the deformation and chipping of the ball tip. Additionally, the strong back taper allows for point cutting, reducing chatter and improving chip prevention and machining surface accuracy. It can accommodate a wide range of machining with 261 items (R0.05 to R3). 【Features】 ■ Thickness of the center part ■ Excellent ball R accuracy ■ Tear-drop shape on the outer circumference ■ Excellent shank accuracy ■ Smoothing treatment ■ Rich variety *For more details, please download the PDF or feel free to contact us.

• End Mills

"PXSH" is a high-hardness steel interchangeable head end mill with a multi-blade square type. It features DUROREY coating, which provides excellent heat resistance and wear resistance, and its superior toughness demonstrates outstanding performance in machining high-hardness steel. Additionally, the optimized cutting edge specifications allow for stable machining of high-hardness steel. Please feel free to contact us if you have any inquiries. 【Features】 ■ Unevenly divided blades suppress chatter ■ Stable machining of high-hardness steel due to optimized cutting edge specifications ■ DUROREY coating *For more details, please download the PDF or feel free to contact us.

• End Mills

We would like to introduce our cut-resistant gloves, 'DURACoil 546'. The palms are coated with foam polyurethane, providing excellent slip resistance and breathability. Additionally, they can be reused multiple times through washing. Please feel free to contact us if you have any inquiries. 【Sizes】 ■S (Total length 22cm) ■M (Total length 23cm) ■L (Total length 24cm) ■XL (Total length 25cm) *For more details, please download the PDF or feel free to contact us.

• Work gloves

"DURACoil 546W" is a cut-resistant glove made from a resin-reinforced type of "DURACoil 546." By combining various types of fibers with "DURACoil," which is covered with fiberglass using high-multifilament, it achieves cut resistance, a pleasant feel, and workability. The palm is coated with foam polyurethane, providing a non-slip effect and excellent breathability. 【Sizes】 ■S (Total length 22cm) ■M (Total length 23cm) ■L (Total length 24cm) ■XL (Total length 25cm) *For more details, please download the PDF or feel free to contact us.

• Work gloves

We would like to introduce our cut-resistant gloves, 'DURACoil 546X'. This is a non-coated type that can also be used as an inner layer. It is a product from a series that balances cut resistance and flexibility. By covering fiberglass with high multi-filament in the 'DURACoil' core and combining various types of fibers, we achieve cut resistance, a pleasant feel, and workability. 【Sizes】 ■S (Total length 22cm) ■M (Total length 22.5cm) ■L (Total length 23cm) *For more details, please download the PDF or feel free to contact us.

• Work gloves

We would like to introduce our cut-resistant gloves, 'DURACoil 346'. By applying a thin coating of natural rubber, we achieve a soft fit. They can be reused multiple times through washing. The resin part is made of natural rubber, while the fiber part consists of polyethylene, polyester, and glass fiber. 【Sizes】 ■S (Total length 22cm) ■M (Total length 23cm) ■L (Total length 25cm) ■XL (Total length 26cm) *For more details, please download the PDF or feel free to contact us.

• Work gloves

We would like to introduce our cut-resistant gloves, 'DURACoil 386'. The foam nitrile rubber coating provides breathability to the palm area, reducing moisture buildup. The palm coating features our unique "S-press finish." Additionally, the nitrile rubber coating on the palm makes it resistant to oil and excellent in abrasion resistance. 【Sizes】 ■S (Total length 22cm) ■M (Total length 23cm) ■L (Total length 25cm) ■XL (Total length 26cm) *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "XYZAX SVF NEX" is a three-dimensional coordinate measuring machine capable of measuring dimensions and geometric tolerances. It features a meson bridge-type high-rigidity gantry structure with guides on both sides of the bridge. The service station provides maintenance and support at 16 locations across Japan. Additionally, we have a dedicated contact point for inquiries about measurement methods, and we offer support via phone (free of charge). 【Features】 ■ Reliable measurement accuracy compliant with JIS standards ■ High-rigidity gantry structure that maintains stable accuracy over a long period ■ Reliable support system *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce our cut-resistant gloves, 'S-TEX KV3'. These gloves are made with stainless steel wire and aramid fibers (Kevlar). The special leaf vein-like processing provides a high anti-slip effect. The packaging contains 120 pairs (10 pairs x 12), and sizes are available in M/L/XL. 【Features】 ■ High cut resistance ■ Made with stainless steel wire and aramid fibers ■ High anti-slip effect ■ Palm coated ■ Seamless gloves *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "S-TEX 581" is a cut-resistant glove made with stainless steel wire and aramid fibers (Kevlar). It features a foam nitrile rubber coating and a unique pressing process called "S-press finish," which provides excellent slip resistance. Additionally, the palm area is breathable, reducing moisture buildup. 【Features】 ■ Embossed finish ■ Foam nitrile rubber coating ■ Unique pressing process "S-press finish" ■ Breathable palm area ■ Excellent slip resistance *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "S-TEX 377SC" is a cut-resistant glove with a wide cuff at the wrist for easy on and off. The foam nitrile rubber coating provides a high anti-slip effect. It uses a mixed yarn made with very fine stainless steel wire, offering cut resistance while remaining soft and excellent for workability. 【Features】 ■ Wide cuff at the wrist for easy on and off ■ High anti-slip effect ■ Uses mixed yarn made with stainless steel wire ■ Soft and excellent workability *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "S-TEX 300" is a cut-resistant glove that features highly visible fluorescent colors in its fabric. The special vein-like processing provides excellent slip resistance. Additionally, it uses a blended yarn made with very fine stainless steel wire, which offers cut resistance while remaining soft and excellent for dexterity. 【Features】 ■ Palm coating ■ Excellent slip resistance ■ Special vein-like processing ■ Cut-resistant strength ■ Soft and excellent for dexterity *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "S-TEX 350" is a cut-resistant glove that features highly visible fluorescent colors in its fabric portion. It uses a blended yarn made with very fine stainless steel wire, providing cut resistance while remaining soft and excellent for dexterity. Additionally, it is coated with nitrile rubber on the palm, making it resistant to oil and excellent in abrasion resistance. 【Features】 ■ Uses highly visible fluorescent colors in the fabric portion ■ Utilizes blended yarn made with stainless steel wire ■ Offers cut resistance ■ Coated with nitrile rubber on the palm ■ Resistant to oil and excellent in abrasion resistance *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "No.521 Chemistar Wire Fit" is a cut-resistant glove made with stainless steel wire and aramid fibers (Kevlar). It offers a good fit and excellent workability, and can also be used as an inner glove. The packaging contains 60 pairs (10 pairs x 6), and sizes available are S/M/L/XL. 【Features】 ■ Made with stainless steel wire and aramid fibers ■ Good fit ■ Excellent workability ■ Low dust generation ■ Ambidextrous *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "No.521Plus Chemistar Wire Fit Plus" is a cut-resistant glove that can also be used as an inner glove. It features a tightly woven structure made with stainless steel wire and aramid fibers (Kevlar). Additionally, it offers a good fit and excellent workability. 【Features】 ■ Can be used as an inner glove ■ Good fit and excellent workability ■ Tightly woven and sturdy construction ■ Low dust generation ■ Ambidextrous *For more details, please download the PDF or feel free to contact us.

• Work gloves

The "TAC Eco Line Heat-Resistant and Oil-Resistant 100°C Specification" that we handle is a hose that can be used for transporting oils, fatty foods, and general food items. It can be cleaned with hot water under conditions below 100°C and can also be cleaned with 95% ethanol, making it hygienic. After use, the hose can be incinerated without generating harmful gases. Additionally, it is semi-transparent, allowing for confirmation of the transported items, and it has a reinforced cord with a pressure resistance performance of 0.7 MPa. 【Features】 ■ Can be used for transporting oils, fatty foods, and general food items ■ Can be cleaned with hot water under conditions below 100°C ■ 95% ethanol cleaning is also possible ■ Can be incinerated without generating harmful gases ■ Semi-transparent for confirmation of transported items *For more details, please download the PDF or feel free to contact us.

• hose

The "TAC Eco Line" that we handle is a product that can be used for food applications. It can be cleaned with boiling water and 95% ethanol, making it hygienic. After use, the hose can be incinerated without generating harmful gases such as hydrogen chloride or sulfur oxides. Additionally, it is flexible and easy to work with, and we also offer an option with a grounding wire for static electricity prevention. 【Features】 ■ Can be used for food applications ■ Can be cleaned with boiling water and 95% ethanol ■ Can be incinerated after use ■ Translucent, allowing for confirmation of transported items ■ Flexible and easy to work with *For more details, please download the PDF or feel free to contact us.

• hose

We would like to introduce our product, "TAC Eco Line Heat-Resistant and Oil-Resistant." This product complies with the Food Sanitation Act and can be used for the transportation of oils, fatty foods, and general food items. Additionally, it is reinforced with cords and has a pressure resistance performance with a permissible pressure of 0.5 MPa (5.1 kgf/cm²), making it suitable for transporting alcoholic beverages such as sake and shochu. 【Features】 ■ Can be used for the transportation of oils, fatty foods, and general food items ■ Can be cleaned with hot water and 95% ethanol, ensuring hygiene ■ Can be incinerated after use without generating harmful gases ■ Semi-transparent, allowing for visibility of the transported items ■ Reinforced with cords and has a pressure resistance performance with a permissible pressure of 0.5 MPa *For more details, please download the PDF or feel free to contact us.

• hose

We would like to introduce the "TAC Eco Line / TAC Eco Line Heat-Resistant and Oil-Resistant Shime TAC Holder" that we handle. With reliable pressure resistance, it allows for the removal of fittings for cleaning. The allowable pressure is below 0.5 MPa, and hot water cleaning is below 0.1 MPa. Additionally, the bolts, flat washers, and nuts are made of SUS304, ensuring a secure anti-loosening structure. 【Features】 ■ Lightweight due to being made of resin, and rust-resistant ■ SUS-made bolts, flat washers, and nuts ■ Reliable pressure resistance ■ Allows for the removal of fittings for cleaning ■ Secure anti-loosening structure *For more details, please download the PDF or feel free to contact us.

• Piping Materials

We would like to introduce our "Eco PP Spring." It is a filling material used when tightening the "TAC Eco Line" with flat bands, and the compatible sizes are Φ25, 32, 38, 50, 65, and 75. It is used to suppress localized bending near fittings. Please feel free to contact us if you have any inquiries. 【Features】 ■ Filling material used when tightening the "TAC Eco Line" with flat bands ■ Used to suppress localized bending near fittings *For more details, please download the PDF or feel free to contact us.

• hose

We would like to introduce the 'GP-KV2R' that we handle. This product uses aramid fibers and has a nitrile rubber coating on the palm, making it resistant to oil and excellent in abrasion resistance. Additionally, due to special processing, it also exhibits slip-resistant effects. Please feel free to contact us when you need it. 【Features】 ■ Uses aramid fibers ■ Nitrile rubber coating on the palm ■ Resistant to oil and excellent in abrasion resistance ■ Exhibits slip-resistant effects due to special processing *For more details, please download the PDF or feel free to contact us.

• Work gloves