NODASCREEN CO.,LTD. List of Products and Services

Aegis Coat WOP is a coating agent that protects electronic circuits with a highly adhesive and flexible fluoropolymer film. It has a powerful moisture-proof performance with a thin film of several micrometers, repelling water, oil, and chemicals. This excellent moisture resistance and strong adhesion to the substrate provide high rust prevention performance. It has already been adopted by many major electronics manufacturers as an industrial product. If you would like a detailed instruction manual, please contact us.

The "WOP Series" is a coating agent for substrate moisture-proofing and drip-proofing that excels in drip resistance and is effective against condensation and salt damage. In a saltwater droplet test, where a measured amount of saltwater was dripped, it was confirmed that there was no corrosion even after 90 minutes had passed since the droplets landed, resulting in a favorable outcome. The evaluation of rust resistance is also high, making it effective for rust prevention. Additionally, a saltwater spray test was conducted for the purpose of evaluating rust resistance. Detailed images of the test results using copper plates and iron plates can be found in the materials.

The substrate coating agent "Aegis Coat: WOP Series" is a fluorine coating agent that protects electronic substrates with a highly adhesive and flexible fluorine film. It has a strong moisture-proof performance with a thickness of 5 to 20 μm, repelling water, oil, and chemicals. This excellent moisture resistance and strong adhesion to the substrate provide high rust prevention performance. It can also be used for moisture control where waterproof designs are insufficient. As an industrial product, it has already been adopted by many major electronics manufacturers.

The Aegis Coat "WOP Series" is a fluorine coating agent that protects electronic substrates with a highly adhesive and flexible fluorine film. It has strong moisture-proof performance in the range of 5 to 20 μm, repelling water, oil, and chemicals. This excellent moisture resistance and strong adhesion to the substrate provide high rust prevention performance. As an industrial product, it has already been adopted by many major electronics manufacturers.

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. ■ Prevents sulfide formation of silver and copper with an excellent sulfur resistance fluorine coating. ■ Can be directly applied to LED mounting boards due to its transparent coating, maintaining brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using dispensers, brushes, dipping, or spraying. ■ Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

- Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. - Prevents the sulfide formation of silver and copper with an excellent sulfur resistance fluorine coating. - Can be directly applied to LED mounted circuit boards due to its transparent coating, maintaining brightness. - Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - Uses a special fluorine solvent that allows for drying at room temperature; forced drying is unnecessary. - Can be applied using a dispenser, brush, dipping, or spraying. - Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. ■ Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. ■ The transparent coating allows direct application on LED mounted boards while maintaining their brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using a dispenser, brush, dipping, or spray. ■ Classified as non-hazardous under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

The "WOP Series" is a coating agent for substrate moisture-proofing and drip-proofing that excels in drip resistance and is effective against condensation and salt damage. In a saltwater droplet test, where a specified amount of saltwater was dripped to confirm the occurrence of corrosion and migration, excellent results were obtained, showing no corrosion even after 90 minutes post-application. The evaluation of rust resistance is also high, making it effective for rust prevention. Additionally, a saltwater spray test was conducted for the purpose of evaluating rust resistance. Detailed images of the test results using copper plates and iron plates can be found in the materials.

- Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. - Prevents the sulfide formation of silver and copper with an excellent sulfur resistance fluorine coating. - Can be directly applied to LED mounting boards due to its transparent coating, maintaining brightness. - Adheres to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - Uses a special fluorine solvent that allows for drying at room temperature; forced drying is unnecessary. - Can be applied using a dispenser, brush, dipping, or spray. - Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

- Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. - Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. - Can be directly applied to LED mounted circuit boards due to its transparent coating, maintaining their brightness. - Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - Uses a special fluorine solvent that allows for drying at room temperature; forced drying is unnecessary. - Can be applied using a dispenser, brush, dipping, or spraying. - Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

The "WOP Series" is a coating agent for substrate moisture-proofing and drip-proofing that excels in water resistance and is effective against condensation and salt damage. In a saltwater droplet test, where a specified amount of saltwater was dripped to confirm the occurrence of corrosion and migration, excellent results were obtained, showing no corrosion even after 90 minutes of droplet exposure. The evaluation of rust resistance is also high, making it effective for rust prevention. Additionally, a saltwater spray test was conducted for the purpose of evaluating rust resistance. Detailed images of the test results using copper plates and iron plates can be found in the materials.

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. ■ Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. ■ The transparent coating allows for direct application on LED mounted boards while maintaining their brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent that allows for drying at room temperature; forced drying is unnecessary. ■ Can be applied using a dispenser, brush, dipping, or spray. ■ Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

The "WOP Series" is a coating agent for electronic circuit boards that excels in water resistance and is effective against condensation and salt damage. In a saltwater droplet test, where a specified amount of saltwater was dripped to confirm the occurrence of corrosion and migration, excellent results were obtained, showing no corrosion even after 90 minutes post-application. The evaluation of rust resistance is also high, making it effective for rust prevention. Please consider it for typhoon and sudden heavy rain measures. Additionally, a saltwater spray test aimed at evaluating rust resistance was conducted. Detailed images of the test results using copper plates and iron plates can be found in the materials.

- Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. - Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. - Combining with waterproof design further increases reliability. - Transparent coating allows direct application on LED circuit boards while maintaining brightness. - Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - Uses a special fluorine solvent that allows drying at room temperature; forced drying is not necessary. - Can be applied using dispensers, brushes, dipping, or spraying. - Classified as non-hazardous under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

- Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency due to fluorine. - Prevents the sulfide formation of silver and copper with an excellent sulfur resistance fluorine coating. - Can be directly applied to LED mounting boards due to its transparent coating, maintaining brightness. - Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. - Can be applied using dispensers, brushes, dipping, or spraying. - Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. ■ Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. ■ Can be directly applied to LED mounting boards due to its transparent coating, maintaining brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using dispensers, brushes, dipping, or spraying. ■ Classified as non-hazardous under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. ■ Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. ■ The transparent coating allows for direct application on LED mounted boards while maintaining their brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using dispensers, brushes, dipping, or spraying. ■ Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

Perfect for companies considering thermal management for electronic substrates! With a thin film that provides moisture-proof functionality, it is ideal for high-density mounted substrates due to its low heat retention. Using a dispenser allows for localized application, making it possible to apply without waste. Even for first-time users, it is designed to be safe and easy to use. ★ Non-hazardous according to fire safety regulations ★ Low odor ★ No dilution required ■ Strongly protects electronic components and substrates from humidity, condensation, rust, and oil with high water and oil repellency from fluorine. ■ Prevents sulfide formation of silver and copper with a fluorine coating that excels in sulfur resistance. ■ Can be directly applied to LED mounted substrates due to its transparent coating, maintaining brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using a dispenser, brush, dipping, or spray. ■ Classified as non-hazardous under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest, please feel free to contact us.

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest at all, please feel free to contact us.

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest, please feel free to contact us.

Typhoons and guerrilla rainstorms can cause seawater to be stirred up, leading to failures in outdoor equipment. Would you like to take measures against such risks in advance with conformal coating agents? - With high fluorine content, it provides excellent water and oil repellency, strongly protecting electronic components and circuit boards from humidity, condensation, rust, and oil. - The fluorine coating has excellent resistance to sulfuration, preventing the sulfuration of silver and copper. - When combined with waterproof design, reliability is further enhanced. - The transparent coating can be directly applied to LED-mounted circuit boards, maintaining their brightness. - It adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - It uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. - Application can be done using dispensers, brushes, dipping, or spraying. - It is not classified as hazardous material under fire safety laws, making it highly safe and eliminating the need for explosion-proof equipment or hazardous material storage.