野田スクリーン List of Products and Services

We offer three types of conformal coatings. "Fluorine-based" Fast-drying at room temperature with low odor! It is easy to handle as it is classified as a non-hazardous material under the Fire Service Act. Compared to organic solvent-based coatings, it has a thin film and low heat retention. "Solvent-free UV" Cures instantly with UV light, significantly reducing production time. It also contributes to VOC measures within the factory. Since it is not subject to UNNo., overseas transportation is easy. "Non-fluorine-based" As a PFAS countermeasure, it does not use fluoropolymer and dries quickly at room temperature compared to organic solvents. It contributes to reducing production costs as it does not require a thermal curing oven. All of these products are more resistant to temperature changes and have superior long-term durability compared to traditional coatings for automotive electronics (organic solvent-based), and they comply with international standards (IPC-CC-830). They can accommodate various dispensers. [Features] ■ Waterproof and moisture-proof ■ Insulating properties ■ Corrosion gas resistance ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ UNNo. non-applicable product numbers available Free samples are also available. For more details, please download the PDF or feel free to contact us.

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a "room temperature fast-drying conformal coating agent" made of fluororesin to provide "moisture-proof insulation protection" for electronic substrates. Our conformal coating agent allows for room temperature drying using low-boiling-point fluorinated solvents, making it easy to achieve moisture-proof insulation protection. It significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, complying with international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests, dielectric strength tests, and thermal shock tests. In addition to moisture protection, it also has resistance to corrosive gases, functioning effectively even in harsh environments. 【Features】 ■ Thin film high performance ■ Moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

We propose three types of conformal coatings as measures against liquid leakage for lithium-ion batteries and capacitors. 'Fluorine-based' Fast-drying at room temperature with low odor! It is easy to handle as it is classified as a non-hazardous material under fire safety laws. Compared to organic solvent-based coatings, it has a thin film and low heat retention. 'Solvent-free UV' Cures instantly with UV light, significantly reducing production time. It also contributes to VOC measures within the factory. Since it is not classified under UNNo., overseas transportation is easy. 'Non-fluorine-based' As a PFAS countermeasure, it does not use fluorine resin and dries quickly at room temperature compared to organic solvents. It also contributes to reducing production costs as it does not require a thermal curing oven. All of these products are more resistant to temperature changes and have superior long-term durability compared to conventional coatings for automotive electronics (organic solvent-based), and they comply with international standards (IPC-CC-830). They can accommodate various dispensers. [Features] ■ Waterproof and moisture-proof ■ Insulating ■ Corrosion gas resistant ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability For those who would like to try it, we offer free samples upon consultation. Please feel free to contact us.

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a "room temperature fast-drying conformal coating agent" made of fluororesin to provide "waterproof and moisture-proof protection" for electronic substrates. Our conformal coating agent allows for room temperature drying using low-boiling-point fluorinated solvents, making it easy to achieve waterproof and moisture-proof protection. By omitting the thermal drying process, it significantly contributes to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, meeting international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests, dielectric strength tests, and thermal shock tests. It has resistance to corrosive gases and functions even in harsh environments (such as hot spring areas and tunnels). 【Features】 ■ Thin film high performance ■ Waterproof and moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

Leveraging our long-standing expertise in conformal coatings, we have developed a VOC-free "solvent-free UV-curable conformal coating." It cures instantly under UV light, significantly reducing production time. Being solvent-free allows for VOC measures in the factory and consideration for the environment. By changing the thermal drying process to a UV curing process, we greatly contribute to the reduction of fossil fuel usage and carbon dioxide emissions. It has excellent insulation properties and can protect electronic substrates. It is suitable for substrates expected to be used in harsh environments. 【Features】 - No organic solvents used - No thermal curing process required - Contributes to the reduction of fossil fuels and carbon dioxide - Long-term durability - Complies with various regulations - Not subject to UN No. - Easy to apply (approximately 100–1000 m·Pa) - High insulation properties In addition to solvent-free UV, we also offer a lineup of fluorine-based and PFAS countermeasures. If you would like samples, please contact us. ★ For more details, please download the materials or feel free to consult us with any questions.

If you are considering use in harsh environments, please consider conformal coating agents. They cure instantly under UV light and, being solvent-free, contribute to VOC measures within the factory. By changing the thermal drying process to a UV curing process, it significantly contributes to the reduction of fossil fuel use and carbon dioxide emissions. We can also propose UV curing equipment. Additionally, compared to conventional coatings (organic solvent-based) commonly used for automotive electronics, our products are more resistant to temperature changes, have excellent long-term durability, and comply with international standards (IPC-CC-830). They can accommodate various dispensers (spray, needle, etc.). 【Features】 - Solvent-free - No thermal curing process required - Contributes to the reduction of fossil fuels and carbon dioxide - Long-term durability - Complies with various regulations - Not classified under UNNo. - Easy to apply (approximately 100–1000 m·Pa) We also offer a lineup of fluorine-based and PFAS countermeasures besides solvent-free UV options. If you would like samples, please contact us. ★ For more details, please download the materials or feel free to consult us with any questions.

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a non-fluorinated resin "room temperature fast-drying conformal coating agent" to provide "waterproof and moisture-proof protection" for electronic substrates. Our conformal coating agent allows for room temperature drying using low-boiling fluorinated solvents, making it easy to achieve waterproof and moisture-proof protection. By eliminating the thermal drying process, it significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, meeting international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests, dielectric strength tests, and thermal shock tests. It has resistance to corrosive gases and functions even in harsh environments (such as hot spring areas and tunnels). 【Features】 ■ Thin film high performance ■ Waterproof and moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to reducing fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

We have developed a "solvent-free UV-curable conformal coating" that "protects" electronic circuit boards from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production man-hours. Being solvent-free also contributes to VOC measures within the factory. It demonstrates its effectiveness as a countermeasure against equipment failures in harsh environments or near the sea. Abroad, there is a growing demand for UV-curable coatings due to the reduction of organic solvent use from an environmental perspective. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, meeting international standards (IPC-CC-830). It can accommodate various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UN No. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to contact us with any questions.

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating market, we have developed a "room temperature fast-drying non-flammable conformal coating" made from non-fluorinated resin to meet the demands of companies concerned about PFAS, providing "moisture-proof and insulation protection" for electronic substrates. Our conformal coating uses low-boiling fluorinated solvents, allowing for room temperature drying, which significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, complying with international standards (IPC-CC-830). To accommodate users' specific requests, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. We also provide fluorinated products and solvent-free UV options, tailoring our recommendations to your applications and preferences! 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

We have developed a "solvent-free UV-curable conformal coating agent" that "protects" electronic circuit boards from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production time. The time required for forced drying can be reduced to just a few seconds. Being solvent-free also contributes to VOC measures within the factory. It demonstrates its effectiveness as a countermeasure against equipment failures in harsh environments or near the sea. Abroad, there is a growing demand for UV-curable products due to the reduction of organic solvent use from an environmental perspective. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, meeting international standards (IPC-CC-830). It is compatible with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UN No. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to consult us with any questions.

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest, please feel free to contact us.

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest at all, please feel free to contact us.

Utilizing the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating market, we present our "room temperature fast-drying non-flammable conformal coating" made from fluororesin, which provides "moisture-proof and insulation protection" for electronic substrates. Our conformal coating allows for room temperature drying due to the use of low-boiling-point fluorinated solvents, significantly contributing to the reduction of fossil fuel usage and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and offers superior long-term durability compared to conventional coatings used in automotive applications, complying with international standards (IPC-CC-830). To meet the detailed requests of users, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. We also have fluorinated products and solvent-free UV options available, and we can propose products tailored to your applications and preferences! 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

We have developed a "solvent-free UV-curable conformal coating" that "protects" electronic substrates from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production man-hours. Being solvent-free also contributes to VOC measures within the factory. It excels as a countermeasure against equipment failures in harsh environments or near the sea. Abroad, there is an increasing demand for UV-curable coatings due to the reduction of organic solvent usage from an environmental perspective. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to traditional coatings for automotive electronics, complying with international standards (IPC-CC-830). It can be used with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UNNo. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to contact us with any questions.

Typhoons and guerrilla rainstorms can cause seawater to be stirred up, leading to failures in outdoor equipment. Would you like to take measures against such risks in advance with conformal coating agents? - With high fluorine content, it provides excellent water and oil repellency, strongly protecting electronic components and circuit boards from humidity, condensation, rust, and oil. - The fluorine coating has excellent resistance to sulfuration, preventing the sulfuration of silver and copper. - When combined with waterproof design, reliability is further enhanced. - The transparent coating can be directly applied to LED-mounted circuit boards, maintaining their brightness. - It adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - It uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. - Application can be done using dispensers, brushes, dipping, or spraying. - It is not classified as hazardous material under fire safety laws, making it highly safe and eliminating the need for explosion-proof equipment or hazardous material storage.