丸一切削工具 List of Products and Services

The Cut Mill Non-Coated High-Speed Steel 2-Flute End Mill "IHEM2S" - New size added! ● Demonstrates a wide range of cost performance from general-purpose machines to machining centers! ● Can be widely used for groove, side, and hole machining. * For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

The Cut Mill High-Speed 2-Blade Coated End Mill "IHEM2S-S" With the new coating: ● High-speed machining is possible! ● Tool life is significantly increased! ● Demonstrates a wide range of cost performance from general-purpose machines to MC! ● Can be widely used for grooving, side machining, drilling, and more. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

The ultra-hard miniature corner rounding cutter 'C-CRC-V' can also process very thin workpieces. It is easy to re-sharpen and is suitable for machining on NC lathes. 【Features】 ■ TiALN coating ■ Special ultra-hard material ■ R chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter
• End Mills

The V-shaped end mill "C-MPE-V" is a multifunctional end mill made from ultra-fine particle carbide material. It can perform V-grooving, chamfering, center drilling, hole drilling, and side machining, all with this one tool. By applying a TiAlN treatment to the ultra-fine particle carbide material, it has significantly improved rigidity and wear resistance, greatly extending tool life. 【Features】 - Capable of V-grooving, chamfering, center drilling, hole drilling, and side machining with this one tool - Sharp cutting edge with a 40° twist angle - Excellent chip removal and outstanding cutting performance - The TiAlN treatment applied to the ultra-fine particle carbide provides high rigidity and excellent wear resistance, significantly enhancing tool life *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

The "Backside Round Carbide Double-Sided Chamfer Cutter 'C-BMC-V'" allows for chamfering on both sides with a single tool. It features a TiAlN coating on ultra-fine carbide, achieving a long lifespan. 【Features】 - No need to flip the workpiece (removes through burrs as well) - Chamfering on both sides is possible with a single tool - TiAlN coating on ultra-fine carbide enhances lifespan *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• cutter
• Other cutting tools

The Powerful Cone Drill (Kirimaru) Non-Coated High-Speed Steel Straight Shank Drill 'TC-SSD' is designed for materials such as stainless steel, aluminum, and steel. It offers excellent positioning even when used on a hand drill. With XR sharpening and a tip angle of 130°, it provides high rigidity and outstanding bite. 【Features】 ■ Compatible with materials such as stainless steel, aluminum, and steel ■ XR sharpening and a tip angle of 130° adopted ■ High rigidity and outstanding bite ■ Good positioning even when used on a hand drill ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Powerful Cone Ball PLUS High-Speed Straight Shank Drill 'TC-SSD-V' is a drill compatible with materials such as stainless steel, aluminum, and steel. It offers excellent positioning when used with a hand-held drill. The tip angle is 130° (125° for D≦1.9), and it features high rigidity and outstanding bite performance. 【Features】 ■ Compatible with materials such as stainless steel, aluminum, and steel ■ Tip angle of 130° (125° for D≦1.9) ■ High rigidity and outstanding bite performance ■ Excellent positioning when used with a hand-held drill ■ Even lighter *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• drill

The Cobalt High SUS End Mill Shank Drill "NC-SUS-SDS-G" has achieved high-precision drilling and improved rigidity and machining efficiency by adopting an X-shaped thinning design. We offer a rich lineup of products. 【Features】 ■ Adoption of X-shaped thinning ■ High-precision drilling and end mill shank ■ Realization of high rigidity and improved machining efficiency ■ Compatible with a wide range of materials including various stainless steels, general steels, cast iron, and aluminum *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Cobalt High-Speed End Mill Shank Drill "NC-SDR-G" achieves high-precision drilling and improved rigidity and processing efficiency through the adoption of an X-shaped thinning design. We offer a rich lineup of products. 【Features】 ■ Adoption of X-shaped thinning ■ High-precision drilling and end mill shank ■ Realization of improved rigidity and processing efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Mini Maru Non-Coated Cobalt High-Speed Steel Small Diameter Drill 'NC-SUS-RD' is a drill suitable for materials such as stainless steel. With the adoption of a 1.5mm shank, it is ideal for high rigidity and precision machining. It is convenient for determining the pilot hole diameter for small diameter roll taps. 【Features】 ■ Suitable for materials such as stainless steel ■ 1.5mm shank adopted ■ Ideal for high rigidity and precision machining ■ Convenient for determining the pilot hole diameter for small diameter roll taps *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Kiri Maru Non-Coated High-Speed Steel Straight Shank Drill 'TC-SUS' is a drill suitable for materials such as stainless steel, aluminum, and steel. With a tip angle of 125°, it offers excellent cutting performance for stainless steel, aluminum, and steel. It is particularly suitable for machining stainless steels SUS303, 304, 316F, and 316L. 【Features】 ■ Compatible with materials such as stainless steel, aluminum, and steel ■ Tip angle of 125° ■ Well-suited for machining stainless steels SUS303, 304, 316F, and 316L ■ Excellent wear resistance and long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The "Power Drill Bit (Kirimal) Straight Shank Drill 25-Piece Set 'TC-SSD SET-25'" is a drill set compatible with materials such as stainless steel, aluminum, and steel. The drill bits are stored in a convenient steel case. Additionally, we also offer the "Tap & Drill Set 'Tap + Power Drill Bit (Kirimal) (Tap M3 to M12 & Pilot Drill) 21-Piece Set.'" 【Features】 ■ Compatible with materials such as stainless steel, aluminum, and steel ■ Stored in a convenient steel case ■ 25-piece set *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The "TAP + Powerful Drill Set (Kirimaru) 21-Piece Set 'TAP + TC-SSD SET-21'" is a product that combines the spiral taps and point taps from Yamamanwa with a powerful drill. It includes 7 types of taps ranging from M3 to M12, along with drill bits for pilot holes in each size. *For more details, please refer to the PDF document or feel free to contact us.*

• Other cutting tools
• drill
• Tap

The Non-Coat High Step Pashank Drill "TC-TD" is a high-quality, low-cost drill. We offer a wide range of products. 【Features】 ■ High quality at a low price ■ HSS ■ Hole processing ■ Tip angle *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The "Taper Shank Drill for Steel Frames" is a drill designed for hole drilling in H-shaped steel, I-shaped steel, and thin plates, featuring a candle-shaped blade design. With the adoption of TiN coating, it has a longer lifespan compared to non-coated products. The effective machining depth is approximately 3D to 5D. 【Features】 ■ Well-suited for hole drilling in H-shaped steel, I-shaped steel, and thin plates ■ Adopts a candle-shaped blade design ■ Enables high-efficiency machining with minimal burrs ■ Longer lifespan due to the use of TiN coating compared to non-coated products ■ Effective machining depth is approximately 3D to 5D *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

Non-Coat Ultra-Hard Straight Shank Drill 'C-SD' ● Unique cutting edge shape that achieves high centering and low resistance. ● Unique flute shape that ensures excellent chip handling and discharge. ● Reinforced corners to reduce chipping during processing. * C-SD 010 to C-SD 019 have a reamer shape. * For other details, please refer to the PDF document or feel free to contact us.

• drill
• Other cutting tools

The non-coated high-long centered drill "TC-LCD" is a cost-effective drill specifically designed for center drilling with a double-edged specification. It is dedicated to center drilling, ensuring that the drill does not wobble. We have a large stock available. 【Features】 ■ Cost-effective double-edged design ■ Dedicated for center drilling (no wobbling) ■ Abundant stock *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Non-Coat High-Snos Type Drill (Triangular Drill) with a 13mm shank, 'TC-LN', is a drill suitable for use with bench drills and electric drills. We have achieved an attractive pricing structure. 【Features】 ■ Triangular Drill with a 13mm shank ■ Attractive pricing structure ■ Well-suited for bench drills and electric drill operations *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The "CBDR-V" drill-equipped sink milling cutter for cap bolts allows for simultaneous drilling and counterboring, significantly reducing the work process time. ■ The adoption of TiALN (titanium aluminum) coating greatly increases the lifespan. ■ A wide range of sizes is available to accommodate bolts from M3 to M16. *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Other cutting tools

The "CBDS-V" sink milling cutter with high-speed drill allows for simultaneous drilling and counterboring, significantly reducing the work process time. ■ The adoption of TiALN (Titanium Aluminum Nitride) coating greatly increases the lifespan. ■ A wide range of sizes is available for use with bolts from M3 to M12. * For more details, please refer to the PDF document or feel free to contact us.

• drill
• Other cutting tools

The ultra-hard cylindrical spiral cutter "TCC" offers excellent durability and achieves a beautiful finish. It is suitable for materials such as general steel, non-ferrous metals, and resin. It provides outstanding cost performance compared to genuine products. 【Features】 ■ Ultra-hard ■ 45° chamfer *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

The coated ultra-hard cylindrical spiral cutter "TCC-G" offers excellent durability and achieves a beautiful finished surface. It is suitable for materials such as general steel and special steel. Compared to genuine products, it provides outstanding cost performance. 【Features】 ■ TiN coating ■ 45° chamfering *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

The Cobalt High-Speed Point Set Drill "NC-PSD-V" is a point set drill coated with TiAlN (Titanium Aluminum Nitride) on cobalt high-speed steel. It enables high-speed machining and significantly extends tool life. We have stock available starting from a small diameter size of φ1.0. 【Features】 ■ TiAlN Coating ■ Cobalt High-Speed Steel ■ Tip Angles (60°, 90°, 120°) ■ Hole Chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Cobalt High-Speed Steel Long Shank Point Set Drill "NC-PSDL-V" is a point set drill coated with TiAlN (Titanium Aluminum Nitride) on cobalt high-speed steel. It is highly effective for machining difficult materials and allows for high-speed processing. Additionally, the tool life has been significantly extended. 【Features】 ■ TiAlN Coating ■ Cobalt High-Speed Steel ■ Tip Angle 90° ■ Hole Chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The non-coated carbide point set drill "C-NC-PSD" is a carbide point set drill that allows for high-speed machining compared to high-speed steel (TiAlN) point set drills. Tool life has also significantly increased. It is suitable for general steel and can also be used for alloy steel and aluminum alloys. 【Features】 ■ Fine particle carbide ■ Hole chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The carbide-coated point set drill "C-NC-PSD-S" is a carbide point set drill that allows for high-speed machining compared to high-speed steel (TiAlN) point set drills. Tool life has also been significantly improved. It is suitable for general steel and can also be used for alloy steel and other materials. 【Features】 ■ Fine particle carbide + AlCrN coating ■ Hole chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• drill

The Non-Tote HSS Counter Sink "CSQ" is a counter sink (chamfer cutter) that can process true circles without fear. The tip angle is 90°. By adopting a three-blade design, the lifespan has significantly increased. 【Features】 ■ HSS ■ Hole chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• End Mills

The Coated High-Speed Steel Counter Sink (Chamfer Cutter) 'CSQ-G' is a chamfer cutter that allows for round processing without fear. The tip angle is 90°. With the adoption of a three-blade design and TiN coating, the lifespan has been significantly increased. 【Features】 ■ High-speed steel + TiN coating ■ Hole chamfering *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• End Mills

The processing of O-ring seal ports for hydraulic manifolds and similar components varies in standards and requires precision, often necessitating expensive specialized tools. Additionally, the need for regrinding leads to significant management and tool inventory costs, which is a problem. The THECUT sheet surface cutter features an insert exchange system that allows for high-precision processing. With the arc type, it is possible to process different sizes using a single body, reducing the burden of tool inventory. Furthermore, by using inserts tailored to the workpiece, it is also possible to improve processing efficiency. Features: - Usable with general machining centers. - Compatible with screw standards ranging from PF1/8 to 1”1/2, M8 to M36, UNF, and SAE 7/16 to 1”7/8. (Sizes not included in standard specifications can be discussed.) - An "Assurance Support Campaign" is currently being conducted for first-time users. - For detailed product information and usage examples, please refer to the technical course materials and individual flyers. *For more details, please refer to the PDF materials or feel free to contact us.

• cutter
• Other cutting tools

We would like to introduce our hydraulic equipment port O-ring groove processing sheet face cutter, "MSSC." This cutter allows for processes that were previously only possible with total type vanishing and brazing types, now standardizing the throwaway type (except for PF1/8). It consolidates the processes for machining the seat face of each screw, R machining on the upper surface, and counterboring. We have standardized the Unified (UNF/SAE) standard products that were previously handled as special cases, and we also welcome inquiries about other standards. Please feel free to contact us. 【Features】 ■ Consolidates the processes for machining the seat face of each screw, R machining on the upper surface, and counterboring ■ No need for regrinding, dramatically reduces running costs including tool expenses (except for PF1/8) ■ Standardizes the Unified (UNF/SAE) standard products that were previously handled as special cases ■ Developed a new rough machining type (AH type) to make even more effective use of conventional products *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other cutting tools

We will offer a special sale with one set of inserts included for those who purchase one holder. (Limit of one set per user) If you have any questions or issues regarding usage, we will respond sincerely. We will present a small gift to those who refer a friend or respond to a survey. (Please use the dedicated application form)

• cutter

The "Seat Surface Inspection Gauge" allows for immediate accuracy assessment after valve seat surface machining. A calibration certificate (registered with the user's name and the main unit's serial number) will be issued for each gauge. We also offer regular calibration services for a fee, and we can accommodate special items as well. 【Features】 ■ Immediate accuracy assessment after valve seat surface machining ■ One calibration certificate issued for each gauge ■ Regular calibration services available (for a fee) ■ Accommodations for special items *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter

The "Super Chamfer Round MTMS Type" demonstrates a nimble cutting performance due to the adoption of positive inserts for lathes. It is also compatible with various manufacturers' lathe inserts, making the insert cost low (there may be a possibility of changing screws). The design features a high-rigidity body and achieves a strong retention force for the insert through three-point clamping. ★ Additionally, new chamfer cutters for 60° and 75° have been added! 【Features】 ■ Nimble cutting performance due to the adoption of positive inserts for lathes ■ MTMS9 can process up to C7, and MTMS6.5 can process up to C4.5 at maximum (based on the insert cutting edge) ■ By changing the insert material and processing conditions, it can accommodate a variety of work materials ■ Can be processed like an end mill from a solid state * For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Universal Chamfer Cutter Kiremen" features a body made from special steel, providing excellent wear resistance and outstanding durability. With dedicated inserts and a unique body structure, it offers exceptional cutting performance without chatter. It has good chip removal and centering properties, making it easy to work with on a drill press. Additionally, it uses a replaceable insert system, eliminating the need for regrinding and reducing running costs compared to counter sinks. 【Features】 ■ Excellent wear resistance and outstanding durability ■ Good chip removal and centering properties, making it easy to work with on a drill press ■ Replaceable insert system eliminates the need for regrinding ■ Reduces running costs compared to counter sinks ■ Inserts made from carbide material have a long lifespan and can be used on three corners, making it economical ■ Using "THECUT Tapping Spray" enhances effectiveness *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter

The "Super Men Tori Maru Zero" enables high-efficiency machining with its high-rigidity body and dedicated inserts. It features a replaceable insert system, eliminating the need for regrinding. Machining similar to that of an end mill is possible from a solid state. Additionally, the nose R0.4 further improves positioning accuracy. 【Features】 ■ Capable of chamfering operations ■ Replaceable insert system, no regrinding required ■ High-efficiency machining with high-rigidity body and dedicated inserts ■ Machining similar to that of an end mill from a solid state ■ Nose R0.4 further enhances positioning accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

This single tool can handle small diameter chamfering that could not be done with an internal diameter holder or could only be done with a leading drill on a lathe. It features an insert exchange system for improved cost performance! ★ Added DLC coating, ideal for aluminum alloy machining. 【Features】 ■ Internal lubrication specification and shank design specialized for lathe use ■ Capable of chamfering operations ■ Insert exchange system, no need for regrinding ■ High rigidity body and dedicated inserts for high-efficiency machining *For more details, please refer to the PDF document or feel free to contact us. #CuttingTools #Chamfering #Lathe #ZERO #THECUT

• Other cutting tools

The 'Super Chamfering Round for Automatic Lathes - Zero' is capable of performing chamfering operations. It is specialized for automatic lathes, utilizing shank diameters of φ7 and φ10. The dedicated insert with a nose radius of R0.4 further improves positioning accuracy. Additionally, it features a replaceable insert, eliminating the need for regrinding. 【Features】 ■ Specialized for automatic lathes, utilizing shank diameters of φ7 and φ10 ■ Capable of chamfering operations ■ The dedicated insert with a nose radius of R0.4 further improves positioning accuracy ■ Replaceable insert, eliminating the need for regrinding *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

When it comes to engraving, it is often thought that specialized machines and tools are used, or that it is simply done with a ball end mill. However, THECUT engraving cutter, with its specialized inserts, allows for processing characters with a minimum width of 0.5mm even on general machining centers. Additionally, it is capable of performing 60° hole chamfering and outer edge chamfering. 【Features】 - Usable on general machining centers. - Capable of engraving with a minimum character width of 0.5mm. - Capable of 60° hole and outer edge chamfering. *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

THECUT DFC cutter is a must-see tool for those who have thought that they need to flip the workpiece to perform chamfering on both the front and back sides. It allows for chamfering on both the front and back sides while keeping the workpiece fixed, and it can also perform V-groove machining on the side. Additionally, the insert can be used on four corners, making it economical. 【Compatible Processing Range】 ■ Maximum Outer Diameter: φ9 to φ20 ■ Minimum Processing Diameter: Front (φ6 to φ14), Back (φ8 to φ20.5) ■ Maximum C Chamfering Amount: Front (C2.3 to C2.8), Back (C1.18 to C2.97) *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other cutting tools

When performing chamfering on both sides of a board or on holes opened in it, it is usually necessary to flip the workpiece from front to back. However, with the THECUT MTMS-WM front and back chamfering tool or the DFC double-sided chamfer cutter, it is possible to chamfer both sides without flipping the workpiece (there are thickness limitations for the workpiece). The inserts are made of carbide material, which has a long lifespan and can be used on three corners, making them economical. 【Features】 ■ Usable with general machining centers. ■ For front and back chamfering of boards, thickness can be up to 30mm. ■ For front and back chamfering of holes, the maximum chamfering amount is 2.8C, and the depth can be accommodated up to approximately 80mm. ■ Chamfering on the back side of T-slots is also possible. ■ Cutting speeds range from 60 to 150 Vc (m/min-1), and feed rates range from 0.02 to 0.15 fz (mm/t). *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Milling

The Takumi series "MT-JE" is an end mill for automatic lathes that has achieved the throwaway concept in the realm of solid end mills. With its unique breaker shape, it offers outstanding cutting performance. It accommodates various work materials with five types of insert materials. 【Lineup】 ■MT-JE143-S10-45 ■MT-JE163-S10-45 ■MT-JE204-S10-45 *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools

The NEW Tornado 'SGLT' achieves an even sharper cutting edge with its dedicated insert. The new flute shape suppresses chip entanglement. A special steel is used for the body, enhancing wear resistance and rigidity. Additionally, the optimal coolant position dramatically improves chip evacuation. 【Features】 ■ The new tip shape significantly improves chip handling and cutting performance. ■ The dedicated insert achieves an even sharper cutting edge. ■ The new flute shape suppresses chip entanglement. ■ Special steel is used for the body, enhancing wear resistance and rigidity. ■ Dramatically improves chip evacuation. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter

The Tornado "GT" features a pilot guide, making it stable even for machining with long protrusions. It prevents chip clogging with escape grooves designed to avoid chip accumulation, and the chip angle lead (30°) also prevents chips from wrapping around. By using special steel for the main body, the strength of the chip seat surface and the cutting resistance (torsional) rigidity have been improved. 【Features】 ■ Adopts a pilot guide for stability even in machining with long protrusions ■ Prevents chip clogging with escape grooves ■ Prevents chip wrapping with a chip angle lead (30°) ■ Increased strength of the chip seat surface and cutting resistance (torsional) rigidity *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter

The adoption of a carbide shank allows for long protrusion machining! All heads and shanks are equipped with coolant holes for excellent chip removal! By preparing spare heads and attaching inserts, work efficiency can be improved! Carbide Shank ITS ITS12-M6-L100-C ITS12-M6-L150-C ITS16-M8-L100-C ITS16-M8-L150-C ITS20-M10-L100-C ITS20-M10-L150-C Super Chamfer Round IMTMS IMTMS6.5-45°-M8 IMTMS9-45°-M10 Super Chamfer Round Zero IZERO IZERO-45°-M6 Double-Sided Cutter IDFC IDFC20-M6 *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• Other cutting tools
• cutter

By adopting a carbide shank, long protrusions in machining are possible! All heads and shanks come with coolant holes, ensuring good chip removal! By preparing spare heads and attaching inserts, work efficiency can be improved! Carbide Shank ITS ITS16-M8-L100-C ITS16-M8-L150-C ITS20-M10-L100-C ITS20-M10-L150-C *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter