アドテックエンジニアリング List of Products and Services

▶ Compatible with various workpieces - Unlike conventional auto peelers, it can peel off high-adhesion films (such as dry film resist, ABF, dry film solder resist, etc.) that are difficult to automatically peel. - It can also accommodate various shapes of workpieces, including ultra-thin films for semiconductors and electronic components, as well as protective films for acrylic and glass. ▶ Compatible with various films - Interlayer insulating materials (such as ABF) - Dry film solder resist (DFSR) - Polyimide films - Other high-adhesion films ▶ Damage reduction - Being burr-free, it reduces film breakage and damage caused by the film. ▶ Clean peeling - Since it does not use air blow, chip flying and dust generation are minimized, resulting in improved yield rates. ▶ Additional options for detection functions available It is possible to detect film breakage and remaining film using sensors or image processing (optional). By adding detection functions, it can further reduce the occurrence of defects and improve yield rates. *Pre-tests using experimental machines are also available before purchase. Please consult us.

• Printed Circuit Board

We would like to introduce the "Auto Peeler" handled by Adtech Engineering Co., Ltd. The protective films such as DFSR and ABF minimize damage to the substrate and enable high-quality peeling. We solve issues such as "product quality deterioration due to nailing marks or film peeling marks" with our unique technology. 【Features】 ■ Compatible with various films (DFSR, ABF, DFR, etc.) ■ Nail-less ■ Air-less ■ Free peeling tests available *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board

The "DIE WALL LUBRICATION SYSTEM" is a mold lubrication device that reduces the amount of lubricant used during powder mixing, leading to high-density and uniform molding. It improves the sizing process of sintered parts and also decreases the amount of lubricant used. It can be used with a variety of powders and different types of presses. Please feel free to contact us when you need assistance. 【Features】 ■ Reduces powder adhesion in the die cavity ■ Decreases the amount of lubricant used *For more details, please refer to the PDF document or feel free to contact us.

• Mold Design

The "TOPS WARM POWDER FEED SYSTEM" is a warm molding device that improves the density of regular molded products to approximately 0.2g/cm³. By overheating key areas such as the powder hose and fill shoe, high-density molding is achieved. Please feel free to contact us when you need assistance. 【Features】 ■ Minimizes powder clogging that occurs during powder heating ■ Achieves high-density molding with no variation *For more details, please refer to the PDF document or feel free to contact us.

• Powder Molding Machine

The "Fluidized Fill Shoe System" is a feeder system designed for uniform, high-speed, and consistent filling of dies. It is compatible with a variety of presses and powders. This system features a simple design and can be adapted to various models and presses. 【Features】 ■ Improves powder flowability during filling ■ Reduces density variation *For more details, please refer to the PDF document or feel free to contact us.

• Instrumentation and Control Systems

J.L. Becker has been manufacturing industrial heat treatment equipment for 40 years and excels in design and construction. The equipment design and advanced computer management unit provide control over the entire furnace, handling custom requirements, data acquisition, maintenance alarms, and more. Please feel free to contact us when you need assistance. 【Overview】 ■ Batch and continuous annealing furnaces (including powder annealing) ■ Continuous quenching ■ Quenching and tempering furnace lines ■ Batch and continuous tempering furnaces ■ Reheating and forging box furnaces ■ IQ furnaces *For more details, please refer to the PDF materials or feel free to contact us.

• Other industrial robots

C.I. Hayes' product line continues to grow alongside satisfied customers in the aerospace, automotive, medical, electronics, cutlery, sports equipment, and jewelry industries. We can also provide suggestions regarding processes and applications for questions related to annealing, nitriding, brazing (atmospheric/vacuum), hardening, ceramic and MIM debinding, sintering, soldering, tempering, and vacuum carburizing/nitriding processes. Please feel free to contact us when needed. 【Industries】 ■ Aerospace ■ Automotive ■ Medical ■ Electronics ■ Cutlery *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

Sinterite Corporation designs and manufactures continuous belt and batch furnaces for sintering, steam treatment, annealing, brazing, and heat treatment. The innovatively manufactured inline cooling system, HyperCooler, is used for sintering hardening. Alloy or ceramic muffles are available. 【Applications】 ■ Iron ■ Stainless steel parts (3,000ºF) *For more details, please refer to the PDF document or feel free to contact us.

• Incinerators and incinerators

The "DENSOMATIC series" is designed as an ISOSTATIC press that performs automatic processes from quantitative filling of materials to molding, discharge, and extraction, and, if necessary, even the subsequent grinding process. It is widely used for mass production of spark plugs and glass tubes. Please feel free to contact us when you need assistance. 【Features】 ■ Cleanliness ■ Ease of tool exchange ■ Operability ■ Durability *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies

The "MONO Series" is an ISOSTATIC press used not only for mass production applications but also for research and development purposes. With its pressure adjustment feature, it controls the molding cycle. Equipped with hydrostatic presses of various capacities, we offer a range of models. Please feel free to contact us when you need assistance. 【Features】 ■ Cleanliness ■ Ease of tool exchange ■ Operability ■ Durability *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies

The "Sizing Press" is a powder molding press designed for high production efficiency, automatically handling press design, part supply, and discharge systems. We offer both inclined sizing presses and upright sizing presses to meet a wide range of part production needs. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ Inclined Sizing Press ■ Upright Sizing Press *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies

The "Servo Press" is a powder molding press that can be used to accurately compress powder into various shapes. The technology utilized includes high-efficiency, high-precision drives that control the operation of the upper ram, die plate, and automatic die filling system. Each axis of the press can be freely programmed to fully control the compaction cycle, such as die filling, upper punch movement/compression, die operation, and discharge cycle. 【Features】 ■ High-efficiency, high-precision drive ■ Freely programmable ■ Achieves extreme precision and reproducibility ■ Enables consistent production of compressed powder components *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies

The "CNC Hydraulic Press" is a powder molding press available in a series ranging from 15 to 1600 tons, designed to compress single or multi-level parts made from carbides, ceramics, plastics, powder metals, and other granular materials. It offers opposing rams, plate floats, or a combination of both. It provides excellent press positioning accuracy, speed control, recipe memory setup, and repeatability, enabling high-quality production. 【Features】 ■ Offers opposing rams, plate floats, or a combination of both ■ System using hydraulic servo controllers, encoders, load cells, and touch screen monitors ■ Provides excellent press positioning accuracy, speed control, recipe memory setup, and repeatability ■ Enables high-quality production *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies

The "Mechanical Press" is an internationally highly regarded powder molding press for the mechanical powder compression in the granulated materials industry. The press capacity ranges from 5 tons to 750 tons, and we offer various series available for manufacturing simple to complex multi-level components. Please feel free to contact us when you need assistance. 【Series】 ■ Performance Series ■ Die Set Series ■ Multi-Action Series *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies

In the "3-Mode Press," it is possible to mold shapes on both sides, such as ball shapes, and three types of molding methods can be selected. Molding using double action is also possible. Additionally, automatic transport of molded products via vacuum is available. Please feel free to contact us when you need assistance. 【Features】 ■ Easy offline assembly, replacement, and adjustment of molds ■ Easy selection and switching of 3 modes ■ High yield rate ■ Minimal variation in molded products (Weight: within 1%, Thickness: within 25μm) ■ High production through high-speed multiple part handling ■ Sharp edges of molded products are ensured (no post-processing required) *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies

The "Anvil-type press" is a unique powder molding method for high-speed mass production. Since it does not require an upper punch, the initial cost can be reduced by 25%, and running costs can be saved by over 50%. The mechanism is simple and highly durable, greatly benefiting users. Please feel free to contact us when you need assistance. 【Features】 ■ Simple structure of the press machine ■ Reduction in mold costs ■ Easy adjustment and replacement of molds ■ No experience required for handling ■ No troubles ■ Easy maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies

We would like to introduce the "clean technology" of Adtech Engineering Co., Ltd. We have a high-cleanliness equipment environment for mass production of exposure devices. Additionally, we can analyze the cleanliness conditions within the equipment in advance to achieve the ideal cleanliness level. Please feel free to contact us when you need our services. 【Technical Overview】 ■ Equipped with a high-cleanliness equipment environment *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce Adtech Engineering Co., Ltd.'s "Peeling Technology." We have included an auto peeler as a standard machine that automatically peels off the protective film of dry film inline. Additionally, films that were difficult to peel, such as ABF and DFSR, can now be automatically peeled using our unique peeling technology. [Examples of Equipment] ■ Peeling of protective films for PCBs, ■ Peeling of other protective films (DFR, ABF, DFSR, etc...) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "robot design technology" of Adtech Engineering Co., Ltd. We can design and manufacture custom robots tailored to your equipment requirements. Additionally, we can propose automation systems using robots from various companies. Please feel free to contact us when you need assistance. [Examples of Equipment] ■ Custom-made robots ■ Robot system integrators from various companies *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the "Alignment Technology" of Adtech Engineering Co., Ltd. Based on the alignment marks detected by sensors and image processing systems, we perform positioning and alignment, accurately correcting the workpiece position. Our high-precision alignment technology, developed through exposure equipment, enables high-precision positioning and alignment. [Examples of Equipment] ■ Bonding Equipment ■ Positioning Equipment *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce Adtech Engineering Co., Ltd.'s "Optical Technology." Starting with our flagship product, the exposure equipment, which boasts a top-level market share, we leverage the know-how of light sources and optical technology cultivated through solar simulators, UV curing equipment, and more, to propose applications using various wavelengths of light. Please feel free to contact us when you need our services. 【Examples of Equipment】 ■ Exposure Equipment ■ UV Curing Equipment ■ Optical Bonding Equipment ■ Optical Inspection Equipment ■ Optical Measurement ■ Solar Simulator *For more details, please refer to the PDF materials or feel free to contact us.

• others

In February 2022, during the research initiative "Development of Solar Power Generation Knitted Base Fabric and Smart Interior for Solar Power Generation," we developed a solar simulator and measurement device for the Fukui Prefectural Industrial Technology Center, featuring an effective irradiation area of 1.5m × 1.0m and compliant with IEC60904/Class AAA. This device has a proven track record of delivery to many testing and research institutions, including AIST and JAXA, and is highly regarded for its performance. It is designed to evaluate the various characteristics of solar cell modules that inherit the "WACOM brand." By pulsing the light source, it enables simulated sunlight irradiation over a large area. The main PR point of this system is that it can be used for both spectral distributions: "AM1.5, which has the same spectral distribution as natural sunlight," and "AM0, which can be used in space development." Switching between AM1.5 and AM0 can be easily accomplished with a simple lever for filter switching and adjustment of lamp current. This system can evaluate modules with different characteristics over a large irradiation area with just one device, maintaining high-quality light while reducing cost and footprint.

• Other physicochemical equipment

Our company offers "high-precision and difficult-to-cut material processing." We are capable of "high-precision deep hole mirror processing," as well as "hard metal direct cutting processing" and "secondary processing of CFRP/CFRTP." We have introduced machine tools that achieve high-precision processing, and we are focusing on temperature management and environmental maintenance within the factory to ensure the accuracy of our products and machine tools. Please feel free to contact us when you need our services. 【Features】 <High-Precision Deep Hole Mirror Processing> ■ Supports aspect ratios (diameter/total length) up to 1:30, from pre-hardened steel to hardened steel. <Separator Molds> ■ Achieves high-precision processing of hardened steel with a uniquely customized high-speed machining center. ■ Established mirror cutting technology to polish cutting marks after machining. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other contract services

Our company responds to various needs for a wide range of products, including contract processing, by utilizing advanced processing technology and know-how, even for ceramics that have high hardness and brittleness, which are difficult to process. We can perform commissioned molding using dry CIP presses and process and manufacture various ceramic components, primarily focusing on alumina. Additionally, we offer a rich selection of products such as "ceramic tubes, protective tubes, and insulating tubes," as well as "crucibles, combustion boats, tanman tubes, and heater baskets." Please feel free to contact us when you need our services. 【Features】 <Commissioned molding and demonstration molding with dry CIP presses> ■ We also conduct research and development purposes and evaluations before equipment introduction. <Ceramic tubes, protective tubes, insulating tubes> ■ Excellent heat resistance, impact resistance, corrosion resistance, creep resistance, and electrical insulation ■ We can also accommodate polishing and fine hole processing according to application needs. *For more details, please refer to the PDF materials or feel free to contact us.

• Ceramics
• Processing Contract
• Other contract services

The "Connector Inspection Assembly Machine" is an automated device that inspects and determines the quality of two parts completed through injection molding using images, assembling only the good products to complete the final product. By conducting individual inspections and selections of the parts before assembly, it prevents the outflow of defects after assembly and avoids issues such as misalignment. Additionally, it supports a variety of products, allowing for quick setup changes by switching the product data and replacing some parts. 【Features】 ■ Equipped with a large hopper ■ Contributes to labor savings by automatically exchanging trays that store the products after assembly ■ Uses robots at key points to achieve high-speed operation and stable performance for the entire device ■ The defect outflow rate is below 1 PPM, meeting the stringent quality standards of the industry *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Other inspection equipment and devices
• Assembly Machine

The "Liquid Crystal Panel Light Orientation Device" is a product that allows for the manufacturing and adjustment of large equipment in a clean room environment. By adopting a twin-stage system, it achieves high productivity. It is equipped with a uniquely developed high-precision linear motor stage that aligns large glass substrates with high precision and performs horizontal transport while maintaining posture and conducting ultraviolet irradiation. Unlike conventional rubbing methods, it uses ultraviolet light to control the light distribution of large glass substrates in a non-contact, clean environment. 【Features】 ■ Capable of manufacturing and adjusting large equipment in a clean room environment ■ Achieves high productivity by adopting a twin-stage system ■ Equipped with a uniquely developed high-precision linear motor stage ■ Conducts light distribution control of large glass substrates using ultraviolet light in a non-contact, clean environment *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Other conveying machines

Our company handles the FA equipment "Parts Supply and Discharge Robot." Using a multi-joint robot, parts are moved from the upstream parts feeder to the processing equipment. The completed parts are then automatically transported by the robot to the downstream conveyor. Additionally, through robot teaching, specified parts can be grasped and moved to any desired location. This product is a labor-saving system that replaces tasks previously performed by humans with robots. 【Features】 ■ It can clear the condition of a cycle time of 12 seconds or less per piece by programming the shortest drive points of the robot. ■ Sensors are installed at key points, allowing for automatic stop when there are no parts available or when the downstream is full and workpieces cannot be placed. *For more details, please refer to the PDF materials or feel free to contact us.

• Other FA equipment
• Other conveying machines
• Transport and handling robots

The "Automatic Box Packing Device (Caser)" is a product that stores product trays, which come in multiple stacked layers from the upstream production line conveyor, into dedicated storage boxes. This device handles the transfer from existing lines and is equipped with a stock function for empty boxes and stored boxes after packing, contributing to labor savings. Additionally, it identifies the orientation of the boxes with sensors to prevent incorrect placement. Please feel free to contact us if you have any inquiries. 【Features】 ■ By exchanging some parts, it accommodates a variety of products, contributing to labor efficiency. ■ It allows for processing of leftover items even during transitions or at the end of production. ■ Simple structure. ■ The angle of inclination can be freely adjusted. *For more details, please refer to the PDF materials or feel free to contact us.

• Other FA equipment
• Other conveying machines
• Packing Machine

The "Resin Lens Unit Assembly Device" is a product that automates the assembly process, which was difficult to perform manually for small lens units. It has functions for supplying parts from a parts tray, inspection, storing in a product tray, and transporting the product tray to the next process. It conducts image inspection using a camera, allowing for front and back inspection of position, scratches, dirt, and debris, achieving high productivity through a compact device configuration and simultaneous operation. 【Features】 - Automates the assembly process that was difficult to perform manually for small lens units - Has functions for supplying parts from a parts tray, inspection, storing in a product tray, and transporting the product tray to the next process - Conducts image inspection using a camera, enabling front and back inspection of position, scratches, dirt, and debris - Achieves high productivity through a compact device configuration and simultaneous operation *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Other conveying machines
• Assembly Machine

The "Work Full Inspection Device" is a product that allows for simultaneous measurement of dimensions at multiple points. By using inline measurement, the time required for measurement is significantly reduced. It can also accommodate automatic handover with existing lines as an option. Operators only need to supply the workpieces, and the device automatically handles transportation, inspection, sorting, and discharge processes. 【Features】 ■ Simultaneous measurement of dimensions at multiple points ■ Significant reduction in measurement time through inline measurement ■ Improvement in quality through high-precision measurement and automatic classification ■ Operators only need to supply the workpieces; the device automatically performs transportation, inspection, sorting, and discharge processes ■ Optional support for automatic handover with existing lines *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Other conveying machines
• Other inspection equipment and devices

The "Bin Picking Device" is a product that utilizes a multi-joint robot and a 3D vision camera. It recognizes the orientation of items stacked haphazardly. After gripping with the arm, it aligns them in the specified orientation on the designated tray. For items that are difficult to align in the specified orientation, it is possible to realign them using a temporary holding platform. We can collaborate on element development such as suitable hands and reorientation mechanisms. Please feel free to consult with us. 【Features】 ■ Utilizes a multi-joint robot and a 3D vision camera ■ Recognizes the orientation of items stacked haphazardly ■ Grips with the arm and aligns to the specified orientation on the designated tray ■ For items that are difficult to align in the specified orientation, realignment is possible using a temporary holding platform *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Transport and handling robots
• Other conveying machines

This is a solar simulator that is recognized by public institutions and is extremely close to sunlight in terms of matching accuracy. We design and manufacture equipment tailored to our customers' needs using high-quality optical technologies, including the solar simulator inherited from Wacom Densou. By using xenon lamps and halogen lamps, we achieve a high matching accuracy (±10%) that exceeds the spectral matching class A (±25%). It can be utilized not only for crystalline solar cells but also for high-efficiency solar cells such as tandem types, and we have a proven track record in building manufacturing lines compatible with the latest perovskite solar cells, as well as equipment for space solar cells (AM0 specifications). In addition to evaluating the characteristics of solar cells, it is also used in a wide range of fields, including light degradation tests for building materials, paints, and materials, as well as UV cut evaluations for cosmetics. Leveraging our expertise in "light sources and optical technology," we can propose solutions using light of various wavelengths.

• Other physicochemical equipment
• Ultraviolet irradiation equipment

To improve spectral matching, our company has adopted a super solar simulator (dual light source solar simulator). Furthermore, to approximate standard sunlight (AM1.5G) even more closely, we have enhanced the technology of the super solar simulator by adding special filters, resulting in a solar simulator that improves spectral matching even in the long wavelength range. It supports the characterization of a wide variety of solar cells, from conventional solar cells to next-generation solar cells such as perovskite, crystalline silicon, compound, and multi-junction solar cells.

• Ultraviolet irradiation equipment

【Product Features】 ○ Clean Release By eliminating the use of air blow, chip flying can be reduced to create a release trigger. ○ No Setup Required No need for setup changes based on the thickness and size of the substrate. ○ Compatible with Ultra-Thin Substrates (Material Thickness: 0.025mm) Equipped with substrate clamps, it can handle ultra-thin plates that were difficult to release with conventional equipment. ○ Compatible with Difficult-to-Release Materials Please consult us regarding difficult-to-release materials such as ABF for PKG substrates and solder resist. ○ Built-in NG Stocker Film remnants are automatically detected by sensors and stored in the NG stocker. ○ Clean Specification Support (Additional Option) Downflow using HEPA filters is also possible. We can conduct release tests with demo machines and consider special support for thin substrates, large substrates, and special films, so please feel free to contact us.

• Printed Circuit Board

We manufacture FA equipment for various industrial fields with a consistent production system from development to post-delivery maintenance. Based on the accumulated know-how of various elemental technologies, we also propose advanced automation equipment that considers usability and operational status after equipment delivery, aiming for higher productivity and quality improvement. Equipped with a large clean room, we respond with comprehensive analysis and evaluation facilities. We have established an evaluation system that can analyze and assess everything from precision parts processing accuracy to the performance evaluation of the equipment itself. 【Features】 ○ Consistent production system ○ Various elemental technologies ○ Well-equipped evaluation facilities ○ Diverse FA equipment delivery track record For more details, please contact us or download the catalog.

• Other FA equipment