日酸TANAKA List of Products and Services

"Reset Ace II/Reset Queen" is a safety device that allows for the reset of the check valve without removal during the operation of a dry safety device. It is fully equipped with the three major mechanisms of "backfire prevention," "backflow prevention," and "shutdown." The handling of installation, reset, and other operations is extremely simple and easy. We offer a lineup including "FA-213-A" suitable for acetylene, "FA-213-P" suitable for LPG, ethylene, and methane (natural gas), and "FA-213-C-O" suitable for oxygen. 【Features】 ■ Allows for the reset of the check valve without removal during the operation of a dry safety device ■ Fully equipped with the three major mechanisms of "backfire prevention," "backflow prevention," and "shutdown" ■ Extremely simple and easy handling for installation, reset, and other operations *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "AU150B-H12II" is a pressure regulator that can continuously and stably supply a flow rate of 150L/min. It is suitable for supplying multiple welding machines or for welding with wind-resistant torches. It is equipped with a flow meter, allowing for flow control, and can be widely used for purposes other than welding, such as in agriculture. In addition to this, we also offer other welding-related products, such as the energy-saving "Heaterless CO2 Pressure Regulator" and "Gas Mixer," which do not require a power supply. 【Features】 ■ With a large-capacity heater, it can continuously and stably supply a high flow rate of 150L/min (normal). ■ Suitable for supplying multiple welding machines or for welding with wind-resistant torches. ■ Equipped with a flow meter, allowing for flow control. ■ Can be widely used for purposes other than welding, such as in agriculture. *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

The "N Cock Jack" is a fluid connector equipped with a backfire and backflow prevention mechanism for blowpipes. By adding a backfire prevention mechanism to the one-touch connector "N Cock Series," it not only facilitates the attachment and detachment of the blowpipe and hose but also reduces the probability of accidents caused by backfire. Different sizes are set for oxygen and combustible gas applications to prevent incorrect connections. 【Features】 ■ Added backfire prevention mechanism to the one-touch connector "N Cock Series" ■ Facilitates the attachment and detachment of the blowpipe and hose while reducing the probability of accidents caused by backfire ■ Different sizes set for oxygen and combustible gas applications ■ Prevents incorrect connections *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Pipe Fittings

The "OstyII MH6-10" is a product that can crimp rubber hoses used for cutting and welding at pressures below 1MPa. By performing crimping, a safe working environment can be achieved, and the crimping tool itself is built robustly for high durability. Crimping caps are included, allowing for immediate use. Additionally, we also offer the "NL-101" torch lighter, which reliably ignites gas cutters, welders, and heaters, as well as the "FN-1107" leather gloves for cutting, designed by Tanaka. 【Features】 ■ Capable of crimping rubber hoses used for cutting and welding at pressures below 1MPa ■ Crimping creates a safe working environment ■ The crimping tool is robustly constructed for high durability ■ Crimping caps are included for immediate use (Applicable for crimping positions 2, 4, and 5, each with 10 sets) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The News Top Ace is a robust and ultra-lightweight super compact safety device. It is a 'completely sealed type' that can be installed in any location, whether outdoors or indoors (factories, laboratories, etc.), and is fully equipped with the three major mechanisms of 'backfire prevention,' 'backflow prevention,' and 'cut-off.' In addition, we also offer products such as the 'Stop King 5 Plus,' which features an operation display mechanism for normal and backfire conditions, and the 'Medium Pressure Water Seal Safety Device.' [Features] ■ Robust and ultra-lightweight super compact size ■ 'Completely sealed type' that can be installed in any location, whether outdoors or indoors (factories, laboratories, etc.) ■ Extremely simple and easy handling for installation and reset *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "N Cock Series" is a fluid coupling with an automatic opening and closing valve that can be connected with a single touch, and is also slim and lightweight. When disconnected, the valve function built into the socket completely shuts off the fluid. Additionally, when connected, the valve automatically opens and allows fluid to flow by inserting the plug. We also offer the "N Cock Twin Hose Set (Narrow Diameter)," which features a spring on the connection side of the regulator to prevent hose damage and improve lifespan. 【Features】 ■ Connects with a single touch and is slim and lightweight ■ Different sizes are set for specific applications considering safety for oxygen and flammable gases ■ The sleeve is identifiable by surface treatment (chrome plating for oxygen use, copper plating for flammable gas use) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Pipe Fittings

Introducing the blowpipe accessories handled by Nissansan TANAKA Co., Ltd. We offer a variety of products including the handle "TH8-3AL" for HC-338S, which can be easily attached to your handheld cutting torch and heater, as well as the fluid fittings with automatic opening and closing valves from the "N Cock Series," and the Tanaka-style cutting gloves "FN-1107." You can choose from a rich lineup according to your needs. 【Features】 <Handle "TH8-3AL" for HC-338S / Handle "TH32AL" for HW-50, C-65> ■ A grip handle that can be easily attached to your handheld cutting torch and heater ■ Distributes the weight of the blowpipe, reducing fatigue and making it suitable for long hours of work ■ Improves the operability of the blowpipe ■ Supports handles for blowpipes other than the above and modifications for longer blowpipes *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools

This document introduces the "Nozzle Series" handled by Nissin TANAKA Corporation. It includes manual cutting nozzles, gouging nozzle capability charts, heating nozzles, and automatic cutting nozzle capability charts. Please use this for selecting products. [Contents (excerpt)] ■ Manual cutting nozzles ■ Manual cutting nozzle capability chart ■ Gouging nozzles ■ Gouging nozzle capability chart ■ Scarfing nozzles *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

We would like to introduce our small and medium-sized LPG heaters (centralized type). The "Small LPG Heater (Centralized Type)" is suitable for heating plate thicknesses from ultra-thin to 9.0mm, while the "Medium LPG Heater (Centralized Type)" can accommodate heating for plate thicknesses from ultra-thin to 20mm. In addition, we also offer the "HW-50 LPG Heater (Diffused Type)," which is ideal for heating steel plates with thicknesses from ultra-thin to 20mm, as well as for plate bending, distortion correction, and brazing. 【Features】 <Small LPG Heater (Centralized Type)> ■ Plate thickness: Suitable for heating from ultra-thin to 9.0mm ■ Heating blowpipe for brazing, suitable for seated work and fixing ■ Set of three nozzles *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Micro Torch II" is a heating burner suitable for fine metal processing in precious metal processing, eyewear manufacturing, dental technology, glass processing, and more. Fuel gases that can be used include propane, LNG, hydrogen, ethylene, and acetylene. It comes with a soft and lightweight dedicated hose and nozzles #5, #6, and #10. Additionally, we also offer a heating burner for quartz glass processing called the "Lead Burning Torch." 【Features】 ■ Fuel gases that can be used include propane, LNG, hydrogen, ethylene, and acetylene. ■ The dedicated nozzle 6150D can be used with all of the above fuel gases. ■ A soft and lightweight dedicated hose is included (hose length: 2,000mm). ■ Nozzles #5, #6, and #10 are included. ■ An extension hose (2,000mm) is available as an option. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

This product is a high-power ZS linear heater suitable for heating plate thicknesses from 12mm to 50mm. It is lightweight and easy to grip, and the heating flame (white point) is long, making the marking lines easy to see. In addition, we also offer the "High Power MOXA S," which is suitable for heating plate thicknesses from 5.0mm to 50mm. 【Features】 <High Power ZS Linear Heater> ■ Lightweight and easy to grip ■ Long heating flame (white point) for easy visibility of marking lines ■ LPG dedicated nozzle ■ Suitable for heating plate thicknesses from 12mm to 50mm *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

This product is a blowpipe mixing type (French style/Kansai style) welding machine of type 00, suitable for heating thin plates around 10mm. The "00 Welding Machine VMS LNG" can handle plate thicknesses from ultra-thin to 2.0mm, the "Small Welding Machine NZ LPG" can accommodate thicknesses from 0.5 to 2.5mm, and the "Medium Welding Machine P LPG" can handle thicknesses from 1.0 to 12mm. In addition, we also offer the "Type 2 Welding Machine (Blowpipe Mixing Type)" suitable for heating from 12mm to 50mm. 【Product Lineup】 ■ 00 Welding Machine VMS LNG ■ Small Welding Machine NZ LPG ■ Small Welding Machine M LPG ■ Medium Welding Machine P LPG ■ Medium Welding Machine K LPG *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

This product is a type A welder/type B welder/type 3 welder, suitable for welding heating from thin plates up to 50mm, using a mixed nozzle type (German style/Kanto style). The "Type A welder (caran type)" is suitable for plate thicknesses from 0.5 to 12mm, the "Type B welder (caran type)" is suitable for plate thicknesses from 5.0 to 25mm, and the "Type 3 welder S (valve type)" is suitable for plate thicknesses from 20 to 50mm. Since the mixing occurs at the nozzle, it can accommodate any fuel gas simply by replacing the nozzle. 【Features】 ■ A wide range of lineups tailored to various applications ■ Type A and Type B welders can be selected in either caran type or valve type according to preference ■ Type A, Type B, and Type 3 welders can also be used as heaters using propane ■ Since mixing occurs at the nozzle, it can accommodate any fuel gas simply by replacing the nozzle *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

This product is a lightweight and easy-to-handle welding machine suitable for plate thicknesses ranging from ultra-thin to around 10mm, specifically the No. 00, small, and medium-sized welding machines. We offer a lineup that includes the "No. 00 Welding Machine MS" suitable for plate thicknesses up to 2.5mm, the "Small Welding Machine NZ" suitable for plate thicknesses from 0.5 to 2.5mm, and the "Medium Welding Machine P" suitable for plate thicknesses from 1.0 to 13mm. Additionally, we also handle the "No. 1 Welding Machine/No. 2 Welding Machine (Blowpipe Mixed Type)" suitable for welding from 5mm to 45mm, which uses a blowpipe mixing method (French style and Kansai style). 【Product Lineup】 ■ No. 00 Welding Machine MS ■ Small Welding Machine NZ ■ Small Welding Machine MZ ■ Medium Welding Machine P ■ Medium Welding Machine K *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools

We would like to introduce the gouging nozzles and scarfing nozzles that we handle. Gouging nozzles are suitable for processing such as back gouging of welds, removal of defects, and corner joint preparation. We offer two types: "115Z" for acetylene gas and "515Z" for LPG. Scarfing nozzles are available in two types suitable for cutting processes: "C65" and "1000E." The "C65" can be used with either acetylene or LPG by changing the nozzle. 【Features of Gouging Nozzle Z】 - Ideal for processing with a width of 5 to 17 mm and a depth of 3 to 12 mm (approximate dimensions of the groove) - Available in two types: "115Z" for acetylene gas and "515Z" for LPG - Suitable for processing such as back gouging of welds, removal of defects, and corner joint preparation *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

We would like to introduce the small cutting machines: K-type cutting machine, B-type cutting machine, and C-type cutting machine that we handle. The "K-type cutting machine" is suitable for cutting plate thicknesses from 3 to 30 mm, the "B-type cutting machine" is suitable for cutting plate thicknesses from 60 to 240 mm, and the "C-type cutting machine" is suitable for cutting plate thicknesses from 100 to 350 mm. The C-type cutting machine comes with a dedicated adjuster, "NT50-CC." 【Features】 ■ Suitable for cutting plate thicknesses from 3 to 30 mm (K-type cutting machine) ■ Suitable for cutting plate thicknesses from 60 to 240 mm (B-type cutting machine) ■ Suitable for cutting plate thicknesses from 100 to 350 mm (C-type cutting machine) ■ A wide range of cutting options from the small cutting machine to the C-type cutting machine ■ The C-type cutting machine comes with a dedicated adjuster, "NT50-CC" *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools

We would like to introduce our medium-sized cutting torch, the "Z Novac" model A cutting torch. The medium-sized cutting torch is suitable for cutting plate thicknesses from 3 to 30 mm. The model A cutting torch is suitable for a wide range of cutting applications with plate thicknesses from 3 to 80 mm. It adopts the unique Novac system from Nisshin TANAKA, which prevents the occurrence of abnormal pressure that can lead to backfire and reduces the entry of flames into the blowpipe. 【Features】 ■ Structure designed to reduce backfire ■ Reduces accidents caused by backfire ■ A medium-sized cutting torch "U45II Novac" is also available, which is approximately 52 mm longer ■ A straight-head blowpipe is also available to suit the working environment ■ Novac system: Prevents the occurrence of abnormal pressure that can lead to backfire and reduces the entry of flames into the blowpipe (unique structure from Nisshin TANAKA) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Master Line VI Series" is a pressure regulator suitable for cutting applications from gas headers and factory piping. It can be widely used in various gas supply facilities and equipment, and the handle with a push display function allows the opening and closing status of the valve body to be visible from the outside. In addition, we also offer the "Master Line VI M Series," which allows for flexible piping design by changing the position of the outlet fittings and pressure gauges, and the "Master Line VI B Series," which arranges the gas inlet at the back for space-saving installation. 【Features】 ■ Suitable for extraction from gas headers and factory piping ■ Can be widely used in various gas supply facilities and equipment ■ The handle with a push display function allows the opening and closing status of the valve body to be visible from the outside ■ This product series has a 3/4-16UNF inlet fitting thread to prevent incorrect connections with high-pressure gas containers * If using conventional piping fittings, conversion fittings from 3/4-16UNF are available. * For more details, please refer to the PDF materials or feel free to contact us.

• Pressure
• Pressure Control

We would like to introduce the "C-type Cutter S & NT50-CC" that we handle. The "C-type Cutter S" has a powerful cutting capability, capable of cutting plates up to 350mm thick, making it suitable for thick plate cutting. The "NT50-CC" can comfortably supply the necessary oxygen of 18,000 to 36,000 L/h (nor) for the "C-type Cutter S," and it reduces hose wear by using an elbow for the outlet joint. It features a portable direct connection to the gas cylinder, and we provide conversion joints for Kansai-style containers. [Features] ■ Powerful cutting capability, suitable for thick plate cutting (C-type Cutter S) ■ Can comfortably supply 18,000 to 36,000 L/h (nor) of oxygen (NT50-CC) ■ Reduces hose wear by using an elbow for the outlet joint ■ Excellent portability with direct connection to the gas cylinder ■ Conversion joints available for Kansai-style containers *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

The "NT50-LA" is an oxygen pressure regulator for lance rods. It is specifically designed for lance rods and can accommodate flow rate requirements of 600L/min (nor) or more. The inlet fitting can be directly attached to the cylinder, and the outlet fitting uses G1/2, allowing for the use of commercially available crimp hoses. Have you ever struggled with insufficient oxygen gas supply that affected the cutting performance of your lance rod? This product, designed specifically for lance rods, can solve that problem. 【Features】 ■ Specifically designed for lance rods, accommodating flow rate requirements of 600L/min (nor) or more ■ Large diameter body design enables high flow supply ■ Inlet fitting can be directly attached to the cylinder ■ Outlet fitting uses G1/2, compatible with commercially available crimp hoses ■ Dedicated hose fittings are also available as accessories *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

The "Master VI LP" is a pressure regulator designed specifically for general industrial gases, suitable for stable supply of LPG with a direct connection type container. If a valve is needed at the outlet, a 6N valve is available, and it can be clearly identified for flammable gases by the red handle. The handle with a push-in display function prevents incorrect operation. 【Features】 ■ Specifically designed for stable supply of LPG ■ A 6N valve is available if a valve is needed at the outlet ■ Clearly identifiable for flammable gases by the red handle ■ The handle with a push-in display function prevents incorrect operation *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

『マスターVI HC』は、水素ガスの供給に適した溶断器用圧力調整器です。 不意の衝撃から圧力計を守るガードを標準装備し、大陽日酸サンカッターHL-1、 その他水素系プレミックスガスに対応。 使用ガスに好適な材質の部品を使用し、安心・安全なガス供給をサポートします。 【特長】 ■大陽日酸サンカッターHL-1、その他水素系プレミックスガスに対応 ■不意の衝撃から圧力計を守るガードを標準装備 ■圧力調整ハンドルには押し込み表示機能あり ■使用ガスに好適な材質の部品を使用し、安心・安全なガス供給をサポート ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせください。

• Pressure
• Pressure Control

The "Master VI Guard Type OG・OF・A" is a pressure regulator for cutting torches that connects directly to the container. In addition to being equipped with an anti-overpush mechanism, it features a guard that protects the pressure gauge from sudden impacts, ensuring safety during on-site work. Additionally, we also offer the "Master VI Guard Type Quick Ace OG・OF・A," which is equipped with a highly reliable, compact, and one-touch attachable dry safety device called Stop Quick. 【Features】 ■ Guard that protects the pressure gauge from sudden impacts ■ Equipped with an anti-overpush mechanism ■ Pressure adjustment handle includes a "push indication function" ■ Acetylene model uses a free-slide mounting bracket ■ Supports quick and reliable installation work *For more details, please refer to the PDF materials or feel free to contact us.

• Pressure
• Pressure Control

The "Prince Changer PC150S-MP-M/PC150S-MP-P" is a semi-automatic switching device for medium pressure (0.7MPa) supply type. It can supply up to 0.7MPa while being excluded from the category of "high-pressure gas manufacturing equipment," and it now features a highly anticipated stainless steel version for medium pressure semi-automatic switching. The two-stage side pressure reducing valve adopts a newly designed low-pressure loss specification, achieving a flow rate of 150 to 250 L/min. 【Features】 ■ Excluded from "high-pressure gas manufacturing equipment" ■ Achieves a flow rate of 150 to 250 L/min ■ Available in two types: manifold type (M) and panel type (P) ■ Improved purity maintenance performance ■ Various options available, including SUS contact pressure gauges and alarm panels *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Pressure

The "Stainless Changer SC-930SSA" is a semi-automatic switching device based on the highly reliable and proven "S-LABO regulator." It is a low-pressure type that uses a stainless steel diaphragm, making it suitable for high-purity gases, including standard gases and laser gases. The two-stage pressure reduction structure allows for stable supply of outlet pressure. Additionally, there is a "Stainless Changer SC-930SSY" available in the lineup, which is a medium-pressure (0.7MPa) supply type. It automatically switches between the left and right gas supply lines, enabling continuous gas supply for extended periods. 【Features】 ■ Semi-automatic switching device based on the highly reliable and proven "S-LABO regulator" ■ Uses a stainless steel diaphragm ■ Capable of continuous gas supply for extended periods ■ Stable outlet pressure supply due to the two-stage pressure reduction structure ■ Does not use electricity as a power source for automatic switching, making it suitable for flammable gases *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Pressure

The "Prince Changer PC250B-LP-M/PC250B-LP-P" is a semi-automatic switching device of low pressure and high flow type. Compared to conventional models, it achieves outstanding flow performance (250L/min). The purity maintenance performance has been improved by covering the diaphragm with Teflon. Additionally, we also offer the medium pressure (0.7MPa) supply type "Prince Changer PC150B-MP-M/PC150B-MP-P" in our lineup. 【Features】 ■ Achieves outstanding flow performance compared to conventional models (250L/min) ■ Available in two types: manifold type (M) and panel type (P) ■ Purity maintenance performance improved by covering the diaphragm with Teflon ■ We provide a stepped valve to assist with installation into existing equipment ■ A variety of options available, including pressure gauges with contacts and alarm panels *For more details, please refer to the PDF materials or feel free to contact us.

• Other physicochemical equipment
• Pressure

The "Prince Changer" is a semi-automatic switching device for general industrial gases. It automatically switches between the left and right gas supply lines, allowing for continuous and long-term gas supply. We offer two types: one for collective devices and one for wall mounting, so you can use it appropriately depending on the installation location. Additionally, by using the optional pressure gauge with contact and the Prince Alarm warning device, you can be notified via a buzzer and lamp when the pressure in the supplying line becomes low. 【Features】 ■ Automatically switches between the left and right gas supply lines ■ Allows for continuous and long-term gas supply ■ Available in two types: for collective devices and for wall mounting ■ Can be used appropriately depending on the installation location *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Pressure

The "ATR" is a pressure regulator for standard gas and high-purity gas made of stainless steel. Weighing approximately 700g, it is ultra-lightweight and compact. The inlet fitting is welded to the body and is compatible with the measurement of harmful air pollutants. It features a metal diaphragm, providing excellent purity maintenance capability. 【Features】 ■ Weighs approximately 700g, ultra-lightweight and compact ■ Low leak with loaded space ■ Inlet fitting is welded to the body ■ Utilizes a metal diaphragm for excellent purity maintenance capability ■ Compatible with the measurement of harmful air pollutants *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

The "JET-Hc" is a pressure regulator for general industrial gases that connects directly to containers and supplies high pressure. It features a built-in filter to reduce internal leak troubles, and by adopting a piston mechanism, it achieves high safety. It can adjust pressure up to a maximum of 20 MPa, making it suitable for various high-pressure gas tests and experiments where high pressure is required. 【Features】 ■ Pressure adjustment up to a maximum of 20 MPa ■ Adopts a piston mechanism for high safety ■ Built-in filter reduces internal leak troubles ■ Ideal for various high-pressure gas tests and experiments requiring high pressure *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

The "Aurora 3" is a pressure regulator for general industrial gases with a piping and connection type. It features a compensation-type structure with minimal pressure fluctuations, ensuring that even if the inlet pressure varies, there is little change in the set outlet pressure, making it suitable for manifold systems, various gas supply equipment, and devices. Equipped with a large discharge valve that operates smoothly, it can be used safely. 【Features】 ■ Used when the flow capacity of the Wing L-200 is insufficient ■ Widely applicable to various gas supply equipment and devices, including manifold systems ■ Compensation-type structure with minimal pressure fluctuations ■ Little change in the set outlet pressure even if the inlet pressure varies ■ Equipped with a large discharge valve that operates smoothly for safe use *For more details, please refer to the PDF materials or feel free to contact us.

• Pressure
• Pressure Control

The "JETV Series" is a two-stage pressure regulator for general industrial gases that is unaffected by changes in supply pressure at the inlet. Thanks to its two-stage pressure reduction structure, the outlet pressure is not influenced by fluctuations in cylinder pressure, allowing for high precision maintenance, making it suitable for applications requiring a constant pressure supply over long periods. Each of the first and second stage pressure reduction valves is equipped with a built-in filter at the inlet, reducing internal leak troubles. 【Features】 ■ The outlet pressure is maintained with high precision, unaffected by fluctuations in cylinder pressure. ■ Suitable for fine pressure and flow adjustments. ■ The diaphragm is covered with Teflon, making it suitable for use with H2 and He. ■ The free inlet and outlet design allows for various applications. ■ All items are standard stock. *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control

The "AU25B-H12II" is a regulator optimized for supplying shielding gas for CO2 semi-automatic welding, MAG welding, and TIG welding. 【Features】 ■ Compatible with all commonly used gases for welding, including CO2, MAG, and Ar gas. ■ A heater with an electrical capacity of 210W is positioned optimally to alleviate cooling due to pressure reduction, achieving stable continuous supply. ■ Stable operation at 100% usage rate is possible even when using CO2. ■ Comes standard with a conversion fitting from M12×1 to 9/16-18UNF, making it usable with various welding machines. ■ Outlet pressure is pre-set, allowing for easy flow adjustment. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• valve

The "HC-391Z" is a cutting tool that enables powerful cutting with simple operation. Equipped with a lever-type cutting oxygen valve, it is suitable for cutting applications with a wide range of plate thicknesses from 6 to 100 mm. It adopts a nozzle mixing method, providing a safe and powerful medium-pressure blowpipe. It has a proven track record of use overseas and is a product suitable for tough job sites. 【Features】 ■ Adopts a nozzle mixing method to reduce accidents caused by backfire ■ Usable with a standard three-stage nozzle ■ Can share nozzles with medium and large gas cutting machines ■ Numerous proven uses overseas ■ Well-suited for tough job sites *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "HC-338S" is a cutting torch that employs a nozzle mixing method, designed for safe and powerful medium-pressure cutting. The cutting oxygen can be adjusted via a valve, and it features an easy-to-use grip with an increased angle of 5 degrees. It is suitable for cutting a wide range of plate thicknesses from 6 to 100mm. The product has an overall length of 525mm and weighs 1,040g. A long-type version is also available as a made-to-order product. 【Features】 ■ Employs a nozzle mixing method ■ Reduces accidents caused by backfire ■ Usable with a standard three-stage nozzle ■ Can share nozzles with medium and large gas cutting machines ■ Cutting oxygen can be adjusted with a valve *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The 'S-LABO ML Series' from TANAKA Corporation is a low-pressure pressure regulator designed for use with highly corrosive gases. In particular, to accommodate gases that are too corrosive for even SUS, the main body is made of highly corrosion-resistant Monel. To maintain purity, a fluorine-based grease suitable for use under vacuum is used in the valve, and a built-in filter is included on the inlet side to prevent backflow. 【Features】 ■ For low pressure ■ Compatible with standard gases, high-purity gases, and corrosive gases ■ Made of Monel with excellent corrosion resistance ■ Ideal for use with highly corrosive gases ■ Purge valve and He leak test available (optional). *For more details, please refer to the catalog or feel free to contact us.

• Pressure
• Pressure Control

The "S-LABO M1 Series" from Nissansan TANAKA Co., Ltd. is a high-pressure pressure regulator designed for use with highly corrosive gases. In particular, to accommodate gases that are too corrosive for even SUS, the main body is made of highly corrosion-resistant Monel. To maintain purity, a fluorine-based grease that can be used under vacuum is applied to the valve, and a filter is built into the inlet side to prevent backflow. 【Features】 ■ For high pressure ■ Compatible with standard gases, high-purity gases, and corrosive gases ■ Made of Monel, which has excellent corrosion resistance ■ Ideal for use with highly corrosive gases ■ Purge valve and He leak test available (optional) *For more details, please refer to the catalog or feel free to contact us.

• Pressure
• Pressure Control