栃木屋 Product Lineup

The use of the rod allows for a two-point lock. It is a flush-type flat latch with minimal protrusion from the mounting surface. By using it in conjunction with THA-429-1-F (fixed type), it can be used for double-opening doors.

• Other machine elements

This is a flat latch that allows for a three-point lock through the use of rods. It is a three-point specification of the conventional product (THA-429). By increasing the latch stroke from 8.81mm of the conventional product (THA-429 (2P)) to 15mm, stability has been further enhanced.

• Other machine elements

It is made of stainless steel in the THA-429 series. Installation can be done without disassembling the main unit.

• Other machine elements

This is a flat-type latch with minimal protrusions from the mounting surface. When closing the door using the latch mechanism, you only need to push the door in; to open it, you just pull the handle. The mounting position can be either vertically or horizontally.

• Other machine elements

The use of the rod allows for a two-point lock. It has minimal protrusions from the mounting surface and is a flush-type flat latch. By using it in conjunction with THA-433-F (fixed type), it can be used for double-opening doors.

• Other machine elements

This is a latch-type flat handle. Closing the door is as simple as pushing it in, and opening the door only requires pulling the handle. It is lightweight because it is made of resin.

• Other machine elements

This product should be used in conjunction with an inner lock (THA-295) and a cam, etc. It features a flat design for enhanced safety. It is widely used on doors of automobiles and construction machinery.

• Other machine elements

These are lock parts for the cab of construction machinery and similar equipment. They securely lock doors and other components. Additionally, they are easy to operate. There are two types of installation methods: boss type and flat type.

• Other machine elements

Please use it as a receiving bracket for the Inner Lock THA-295 series.

• Other machine elements

This is an interior handle for doors of construction machinery (operator cabs), which allows you to unlock and open the door simply by pulling the lever.

• Other machine elements

We have prepared two types: push-in type and pull-in type. In both cases, the mechanism retracts the latch when the handle is rotated approximately 55 degrees (it is compatible for both left and right use). Additionally, this product allows for free reconfiguration of the handle.

• Other machine elements

You can choose the size depending on the installation location.

• Other machine elements

You can choose the size depending on the installation location.

• Other machine elements

You can choose the size depending on the installation location.

• Other machine elements

By using it in conjunction with the push-in type rod holder, it will reduce assembly man-hours.

• Other machine elements

It is a mounting hole for a double square (star shape), allowing for adjustment of the mounting angle in 45-degree increments.

• Other machine elements

These are stop fittings for use with □8 and □10. You can choose the size depending on the installation location. ★ Depending on the mounting position of the rod, two types of stroke can be selected. ★ (Handle rotation 60°... 28mm stroke, Handle rotation 90°... 34mm stroke)

• Other machine elements

We have standardized a highly versatile size for box door locks. We also provide assembly with fastening hardware.

• Other machine elements

This is a link-type locking device that securely holds the box door in three points. Please use it in conjunction with the handle.

• Other machine elements

This is a one-touch operation bushing for rod connection that eliminates the hassle of crimping. It is a bushing with consistent movement that resolves operational failures caused by variations in crimping. It allows for labor-saving, which leads to cost reduction.

• Other machine elements

By combining with flat latches and various handles, it is possible to achieve 2-point or 3-point locking.

• Other machine elements

It is a fastening device for the handle.

• Other machine elements

By replacing the rotation regulation cam used for a specific handle with this product, you can fix the rotation. If the door of the casing, etc., opens like a folding door, please install it in the handle on the side where the locking and unlocking operation of the key is not performed.

• Other machine elements

This is a handle with a luxurious feel due to the melamine coating. It can be installed from either the outside or the inside. The installation surface will be flat.

• Other machine elements

This is a rotating handle developed with the concept of reducing installation man-hours. The design of the handle has also been completely renewed, featuring a rectangular shape that matches various enclosures.

• Other machine elements

This is a stainless steel rotating handle with a matte finish that has a subdued and elegant appearance.

• Other machine elements

This handle is easy to grip and has a built-in spring, resulting in minimal play in the arm.

• Other machine elements

It is a rectangular trunk handle. The one with a spring prevents the handle from swinging.

• Other machine elements

This is a typical handle for a carry box.

• Other machine elements

It is a round handle with an accent on the base.

• Other machine elements

It is a simple arm-type handle.

• Other machine elements

This is a handle with a built-in spring in THA-131 to prevent the handle from wobbling.

• Other machine elements

When not in use, the handle fits into the main body, making the surface flat.

• Other machine elements

This is a handle that can be used effectively around the casing by folding it down when not in use. The handle is designed to be less wobbly due to the detent mechanism.

• Other machine elements

It is a handle with a soft leather touch.

• Other machine elements

It has a lightweight and easy-to-grip design, making it suitable for storage cases for devices that require portability.

• Other machine elements

A leaf spring is used in the handle part.

• Other machine elements

A leaf spring is used in the handle part.

• Other machine elements

This is a handle with a slim and smart design. Since the mounting screws and other components are not visible on the surface and there are no protrusions, it can be used with any equipment or device without discomfort.

• Other machine elements

1. Adopts a push-in method that simplifies installation. ★2. A three-point parts configuration focused on VE. ★3. Provides space for company names or logos (nested surface).

• Other machine elements

A leaf spring is used in the handle part.

• Other machine elements

A leaf spring is used in the handle part.

• Other machine elements

A leaf spring is used in the handle section.

• Other machine elements

A flat spring is used in the handle part.

• Other machine elements

A leaf spring is used in the handle part.

• Other machine elements