北越融雪 List of Products and Services

In Niigata Prefecture, there is a system that provides subsidies at the time of introduction to promote the use of snow-resistant houses (houses that do not require manual removal of snow from the roof) in special heavy snowfall areas. The aim is to reduce the burden and prevent dangers associated with removing snow from roofs. Snow-resistant houses refer to homes that do not require manual snow removal, and typical types include snow-resistant houses, snow-shedding houses, and snow-melting houses. [Types of Snow-Resistant Houses] ■ Snow-Resistant Houses ■ Snow-Shedding Houses ■ Snow-Melting Houses *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Road Surface Snow Melting (Electric Heater Mat Installation)" service. For limited areas such as in front of the entrance or garage, we use a construction method that involves laying down rubber mats with built-in electric heaters. In this case, on-site work typically involves preparing a power supply or installing a device to control the ON-OFF of the power supply, which offers advantages in terms of both construction time and cost. Additionally, it is convenient for long-term use as only the deteriorated parts can be easily replaced. 【Features】 ■ Advantages in terms of both construction time and cost ■ Easy to replace only the deteriorated parts even after long-term use *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Road Surface Snow Melting System (Electric Heater Embedded Type)." In the past, when using electric heaters for road surface snow melting, it was common to experience insulation failures within a few years after installation, leading us to avoid it as a first choice. However, in recent years, the quality of the products has improved. Additionally, the use of electric heaters for snow melting is often adopted in all-electric homes due to the simplicity of the equipment, relatively affordable initial costs, and the lack of concern for fuel supply. 【Features】 ■ There are products compatible with both 100V and 200V ■ No need to worry about fuel supply ■ Often adopted in all-electric homes *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce our "Road Surface Snow Melting (PEX Embedded Type)." In the past, polybutene pipes were used for road surface snow melting, but now high-density cross-linked polyethylene pipes (PEX), which are lightweight, flexible, and rich in workability and durability, have become mainstream. In the event of a leak in road surface snow melting, it becomes difficult to identify the leak location and repair the piping when embedded in the pavement slab. To minimize this risk as much as possible, we use a continuous piping system with one circuit per roll and ensure that there are no joints in the embedded section. 【Features】 ■ Generally, we plan for embedding within concrete pavement slabs. ■ When embedding within asphalt pavement slabs, we use high-temperature resistant aluminum polyethylene composite pipes, etc. ■ There are cases where construction is carried out while cooling with cold water. *For more details, please refer to the PDF materials or feel free to contact us.

• others

Road surface snow melting primarily aims to melt snow in areas such as residential entrances and in front of garages. Our company predominantly uses hot water piping for snow melting; however, in cases of small areas such as all-electric homes, we may select embedded electric heaters. Additionally, depending on budget and the usage conditions of the building, if it is difficult to dismantle existing pavement slabs, we may also choose to install electric heater mats. Due to its nature, road surface snow melting cannot retain accumulated snow like roof snow melting, which often leads to longer operating times. [Types] ■ PEX embedded type ■ Electric heater embedded type ■ Electric heater mat installation type *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce points and examples regarding our roof snow melting system. In cases where snow has melted in the center of the roof but remains at the eaves and gable ends, workers have to climb onto the roof to manually remove the leftover snow. To prevent such situations, we install piping all the way to the outer edges, with a design that increases piping density, especially at the eaves. 【Key Points (Partial)】 ■ Areas where snow tends to remain, such as eaves and valleys, are designed with increased piping density to enhance heat dissipation. ■ In the case of horizontal tile roofing, vertical piping is generally used, while horizontal piping is employed only at the eaves to prevent snow cornices. ■ We investigate the usage of the floor directly below the roof and design increased piping density for rooms directly above the north side, which tend to have lower usage rates. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the construction guidelines for roof snow melting at North Vietnam Snow Melting Co., Ltd. In the case of new houses, work begins after the frame is completed, with roofing laid on the sheathing. For existing houses, the process involves setting up scaffolding, removing existing roofing materials, repairing the sheathing, and then starting with roofing laid on the sheathing. Roof metalwork can be done once the copper piping installation is complete, and snow retention brackets are placed on the metalwork according to the roofing method and slope. 【Construction Guidelines (Partial)】 <For New Houses> ■ Work begins after the frame is completed, with roofing laid on the sheathing. <For Existing Houses> ■ Set up scaffolding → Remove existing roofing materials → Repair the sheathing → Start with roofing laid on the sheathing. *For more details, please refer to the PDF document or feel free to contact us.

• others

We offer "Roof Snow Melting (Exposed Electric Heater Net)" services. If the snow melting area is small, combining piping equipment and heat source devices may become costly. In such cases, there is a method to directly fix electric heaters to the roof surface to generate heat and melt the snow, so please feel free to consult with us. 【Construction Examples】 ■ Smooth snow shedding ■ Additional work with light equipment *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce our "Roof Snow Melting (Metal Roofing / Snow Slide Induction Type)." A snow slide roof allows snow to naturally slide off before it accumulates too much by having a steep slope. However, depending on the structure of the building, there may be areas where snow gets stuck or is difficult to slide off. Therefore, the "Snow Slide Induction Type" is designed to lower the friction coefficient by slightly melting the boundary between the snow and the roof surface through heating, thereby inducing the snow to slide off. 【Features】 ■ Slightly melts the boundary between the snow and the roof surface through heating ■ A structure that lowers the friction coefficient and induces snow sliding *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company offers "Roof Snow Melting (Metal Roofing / Double Folded Plate Type)." This system features parapets on three sides of the roof and is constructed with two layers of folded plates, referred to as "Double Folded Plate Snow Melting." This method is often adopted for residential buildings with a snow load strength class of 3m, and it was developed to eliminate the need for snow removal during heavy snowfall, even for snow-resistant homes. 【Features】 ■ Heating the upper folded plate through piping installed between the two layers of folded plates ■ A slight airflow channel is provided on the upper side to suppress the formation of icicles ■ Hot water supply pipes are arranged on the underside to reduce icicle formation at the eaves ■ Commonly used in homes with a snow load strength class of 3m ■ Enables snow management at a low cost *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company offers "Roof Snow Melting (Metal Roofing / M-Type Roof)." The structure, which features a parapet around the roof perimeter and an internal gutter at the center of the roof to drain rainwater and melted snow through the internal gutter, is called an "M-Type Roof." Compared to conventional sloped roofs, it does not create icicles or snow buildup at the eaves, allowing for more flexibility in time constraints and reducing the heat loss per hour to about one-third. While it is very energy-efficient, this method is difficult to adopt unless implemented during the construction of new buildings, as it imposes constraints on the building's structure. 【Features】 ■ Parapet around the roof perimeter and internal gutter at the center of the roof ■ Snow moves from both sides of the peak towards the internal gutter in the valley while being warmed on the roof surface ■ Does not create icicles or snow buildup at the eaves compared to conventional sloped roofs ■ More flexible time constraints *For more details, please refer to the PDF materials or feel free to contact us.

• others

Our company offers "roof snow melting (metal roofing/W-shaped roof)." In typical houses, snow slides off the eaves that protrude from the exterior walls, which can be in the form of gable, hipped, or shed roofs. In snowy regions, the snow that slides off these eaves can extend outwards, wrapping around the eaves trough (known as "seppi"), and icicles may grow at the tip. The "W-shaped roof" is designed to save fuel as much as possible and minimize damage from seppi and icicles by incorporating a triangular dam at the eaves of the roof, which catches and melts the incoming snow. 【Features】 ■ Saves fuel as much as possible ■ Minimizes damage from seppi and icicles ■ Incorporates a triangular dam at the eaves of the roof *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Snow Melting for Tile Roofs (Tile Roofing / Concealed Copper Pipe System)." For snow melting on tile roofs, most systems involve exposed piping on the surface of the tiles, typically using rubber hoses or SUS flexible pipes arranged along the tile surface. However, our installation allows for a "concealed" system where copper pipes are laid beneath the tiles. In our snow melting system for tile roofs, we raise the tile battens and place thin copper pipes between the roof sheathing and the tiles. However, due to increased resistance in the piping, we cannot extend the piping length for each circuit, leading to a tendency for a higher number of branches. [Features] ■ Raise the tile battens and place thin copper pipes between the roof sheathing and the tiles. ■ Due to increased resistance in the piping, we cannot extend the piping length for each circuit, leading to a tendency for a higher number of branches. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Roof Snow Melting System (Metal Roofing - Standing Seam and Folded Plate / SUS Exposed Pipe Type)." The metal finishing accommodates various styles such as standing seam (horizontal piping), horizontal one-piece (vertical piping), and folded plate (horizontal piping). SUS or SGP straight pipes are arranged on top of the roof metal using dedicated fittings, and a heated antifreeze solution is circulated within the pipes, creating heat conduction from the pipes to the snow, thereby melting it. 【Features】 ■ Circulation of heated antifreeze within the pipes ■ Metal finishing accommodates standing seam (horizontal piping), horizontal one-piece (vertical piping), and folded plate (horizontal piping) *For more details, please refer to the PDF document or feel free to contact us.

• others

"Roof Snow Melting (Metal Roofing / Panel Concealed Type)" is one of our representative construction methods. We lay our original snow melting panels under the metal roofing, and by circulating heated antifreeze through pipes arranged in the grooves of the panels, we achieve heat conduction in the order of pipes → panels → metal roofing → snow, thereby melting the snow. This method is adopted in new constructions, when re-roofing due to aging of the metal roofing is involved, or when there is a desire to avoid exposed piping for the sake of reducing running costs. [Features] ■ Since the piping is embedded under the metal roofing, the temperature of the hot water is less likely to drop. ■ There is minimal heat loss. ■ Running costs tend to be relatively low. ■ Numerous construction examples available. *For more details, please refer to the PDF materials or feel free to contact us.

• others

Our snow melting system is called the "non-spray snow melting equipment," which directly applies thermal energy generated by boilers, heat pumps, and electric heaters to roofs and road surfaces to melt snow. It allows for flexible design adaptations and can handle heavy snowfall exceeding 70 cm in a single day. Additionally, various heat sources such as kerosene, gas, electricity, and biomass can be combined according to customer requests. 【Features】 - Various heat sources such as kerosene, gas, electricity, and biomass can be combined - Flexible design adaptations are possible - Capable of handling heavy snowfall exceeding 70 cm in a single day - Usable for several decades - If the heat source unit fails, only that part can be replaced *For more details, please refer to the PDF materials or feel free to contact us.

• others

In recent years, the popularity of pellet stove life, which embraces the environment while not sacrificing comfort, has been on the rise due to the diversification of lifestyles. The secret lies in the soft warmth and the enjoyment of the soothing flames. The stoves from Italy's Edilkamin, highly regarded as the best in Europe, are chosen by many customers in Japan for both new builds and renovations due to their rich designs and excellent functionality. In this document, we introduce various topics, including "case studies" and a "Q&A" section, to help you cherish your pellet stove for a long time. We encourage you to read it. [Contents] ■ Introduction ■ "Pellet Stove Talks" of Eternal Maidens ■ Each Pellet Stove Life ■ Pellet Stove Q&A ■ Showroom Information *For more details, please refer to the PDF document or feel free to contact us.

• others

The 'pellet stove' is gaining attention due to environmental issues (SDGs) and rising oil prices. We have compiled nine key points to consider when evaluating it into a document! This document provides detailed information about the appeal and benefits of pellet stoves, as well as information about the fuel, making it essential reading for those considering installation. Feel free to check it out via the "PDF Download." 【Document Contents】 ■ What is a pellet stove? ■ Is a pellet stove warm? ■ How economical is a pellet stove? ■ Is a pellet stove environmentally friendly? ■ Is a pellet stove easy to use? ■ Is a pellet stove safe? ■ Are all pellet fuels the same? ■ Are there various types of stoves? ■ What should you do first when considering stove installation? *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce the "warm air duct components" from our range of exhaust pipes and related materials for pellet stoves. Starting with the stainless steel "reduced socket φ80F-φ60M," we also offer aluminum products, including the white-painted "aluminum die-cast straight pipe φ60." Additionally, we have other products available such as the "warm air outlet," "grille outlet set with mesh," and "Y-shaped duct socket φ80," among others. 【Product Lineup (Partial)】 ■ Reduced socket φ80F-φ60M ■ Aluminum die-cast straight pipe φ60 ■ Aluminum die-cast elbow pipe 90° φ60 ■ Aluminum die-cast male-male elbow pipe 90° φ60 ■ Aluminum die-cast elbow pipe 45° φ60 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "surrounding materials and accessories" from the exhaust pipes and related components for pellet stoves that we handle. Starting with heat-resistant aluminum tape (50m roll) "Aluminum Coating Tape," we also offer the very convenient "Touch Paint Spray" for cutting and installing exhaust pipes, as well as for repairs during maintenance. Additionally, we handle items such as "Stove Pipe Heat Guard," "Stove Floor Plate," and "Pellet Case." 【Product Lineup (Partial)】 ■ Aluminum Coating Tape ■ Touch Paint Spray ■ MC Glass Cleaner Clean 2000 ■ Stove Pipe Heat Guard ■ Stove Floor Plate *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Stainless Insulated Double Pipes" from our range of exhaust pipes and related components for pellet stoves. We offer products such as the "Stainless Insulated Double Pipe SLIM Straight Pipe (φ80 & φ100)" with 10mm insulation, and the "Stainless Wall Mounting Bracket" made of stainless steel with a width of 40mm and a thickness of 1.2mm, featuring rib processing for added strength. Additionally, we also handle various products such as elbows and T-pipes, as well as adapters for the "Stainless Insulated Double Pipe SLIM." 【Product Lineup (Partial)】 ■ Stainless Insulated Double Pipe SLIM Straight Pipe (φ80 & φ100) ■ Stainless Insulated Double Pipe SLIM Elbow Pipe 45° (φ80 & φ100) ■ Stainless Insulated Double Pipe SLIM φ80 Elbow Pipe 90° ■ Stainless Insulated Double Pipe SLIM φ80 Male × Single φ80 Female Ash Receiver T-Pipe ■ Stainless Insulated Double Pipe SLIM φ80 Female × Single φ80 Female Adapter *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "stainless steel exhaust pipes" from our range of exhaust pipes and related components for pellet stoves. In addition to the lightweight, durable, and rust-resistant "stainless steel single straight pipe," we also offer the "stainless steel single straight pipe without ribs" for wall penetration components. Furthermore, we have available "stainless steel single telescopic straight pipes" and "stainless steel cover rings (with packing)," among others. 【Product Lineup (Partial)】 ■ Stainless steel single straight pipe ■ Stainless steel single straight pipe without ribs ■ Stainless steel single telescopic straight pipe ■ Stainless steel cover ring (with packing) ■ Stainless steel single pipe φ80 T-joint male-female *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Iron Exhaust Pipes (White Paint)" from our range of exhaust pipes and related components for pellet stoves. Starting with the white-painted iron single straight pipe for indoor piping, "Iron Single Straight Pipe (White) φ80," we also offer "Stainless Steel Straight Pipe without Ribs (White) φ80" in our lineup. Additionally, we have "Elbow Pipe 45° (White) φ80," "Ash Receiver T-Pipe (White)," and "Slide Type One-Touch Mounting Bracket," among others. 【Partial Lineup】 ■ Iron Single Straight Pipe (White) φ80 ■ Telescopic Straight Pipe (Adjustable Length) (White) ■ Stainless Steel Straight Pipe without Ribs (White) φ80 ■ Elbow Pipe 45° (White) φ80 ■ Elbow Pipe 90° (White) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Iron Exhaust Pipes (Black Coated)" from our range of exhaust pipes and related components for pellet stoves. Starting with the cost-effective and robust "Iron Single Straight Pipe," which offers excellent workability, we also offer the "Iron Telescopic Straight Pipe," which allows for infinite length adjustment when used in combination with the single straight pipe. Additionally, we have available "Iron Elbow Pipe 45°," "Ash Receiver T-Pipe," "Exhaust Pipe Cap," and "Male-Male Socket," among others. 【Product Lineup (Partial)】 ■ Iron Single Straight Pipe ■ Iron Telescopic Straight Pipe (Length Adjustable Pipe) ■ Elbow Pipe 45° ■ Elbow Pipe 90° ■ Elbow Pipe 90° with Ash Check Window *For more details, please refer to the PDF document or feel free to contact us.

• others

The "DISK E" is a pellet stove recommended for spaces that do not require high heating capacity. To overcome issues such as incomplete combustion caused by negative pressure indoors in highly airtight homes, it is designed to draw 100% of the combustion air from the outside. The operation panel on the top of the unit allows for five levels of heat settings, room temperature settings, and timer settings. Additionally, while it is a shield model suitable for highly airtight homes, it features an air curtain mechanism that extends the air supply to the inside of the glass, allowing for a long time of viewing a clean flame. 【Features】 ■ Compact size at 83 cm tall ■ Uses vermiculite in the combustion chamber to enhance combustion efficiency ■ Efficiently outputs radiant heat ■ Warm air is blown out from the top *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ALINA E" is a slim pellet stove that fits neatly into any space. To overcome issues such as incomplete combustion caused by negative pressure in high airtight homes, it is designed to take in 100% of its air from the outside. The combustion chamber uses vermiculite to enhance combustion efficiency and output radiant heat effectively. Additionally, the control panel on the top of the unit allows for five levels of heat settings, room temperature settings, and timer settings. 【Features】 ■ Ultra-slim design with a depth of 26cm ■ Shield model suitable for high airtight homes ■ Air curtain mechanism allows for a long time of viewing a clean flame ■ Exhaust direction can be selected from the top, rear, or right side ■ Warm air fan can be adjusted in five levels for each heat setting *For more details, please refer to the PDF document or feel free to contact us.

• others

If you are considering a "pellet stove," which is gaining attention due to environmental issues (SDGs) and rising oil prices, please feel free to consult with us. <Benefits of consulting with us> ■ We handle a wide range of domestic and international manufacturers and have extensive knowledge. We can propose pellet stoves tailored to your needs. ■ We can provide design proposals from the drawing stage. We will suggest suitable designs tailored to your property. ■ We can handle installation and construction work. We can accommodate installation requests anywhere in the country. We welcome house builders and architects! With years of experience and a wealth of achievements, we provide consistent support from design to proposal and installation work, so if you are considering a pellet stove, please feel free to contact us. *For more details, please download the PDF or feel free to reach out to us.

• others

Due to environmental issues and the soaring prices of oil, "pellet stoves" are expected to gain increasing attention in the future. "Pellet stoves" efficiently warm your room with a double effect of warm air (convection) and infrared (radiant heat), combining the best features of oil fan heaters and wood stoves. They excel in functionality, featuring easy-to-use and highly safe elements such as automatic ignition systems, timers, and earthquake-resistant devices. At our company, we have prepared a wide range of models with different heating capacities, designs, and functions in our headquarters showroom, allowing customers to choose one that fits their lifestyle. From simple, easy-to-understand Japanese manufacturers to feature-rich, stylish, and powerful imported models, we can demonstrate more than 10 models with live combustion at all times. If you are considering an oil fan heater, why not take this opportunity to consider a "pellet stove"? *For more details, please download the PDF or feel free to contact us.

• others

Oil fan heaters and air conditioners provide easy operation to warm the air in your room through convection heating. However, since walls and ceilings do not warm up easily, warm air escapes quickly when you open the door, making it feel chilly. Pellet stoves efficiently warm your room with a double effect of warm air (convection) and infrared (radiant heat), combining the best features of oil fan heaters and wood stoves. They excel in functionality, featuring automatic ignition, timers, and seismic safety devices, making them user-friendly and highly safe. Due to environmental issues and rising oil prices, pellet stoves are gaining more attention. Our company has prepared a variety of models with different heating capacities, designs, and functions in our headquarters showroom, allowing you to choose one that fits your lifestyle. From simple, easy-to-understand Japanese manufacturers to feature-rich, stylish, and powerful imported models, we can demonstrate over 10 models with live combustion at all times. If you are considering an oil fan heater, why not take this opportunity to look into a pellet stove? *For more details, please download the PDF or feel free to contact us.

• others

Wood stoves and fireplaces warm the ceiling and walls of a room through radiant heating, but it can be quite difficult to maintain a good fire, and heat has a hard time reaching areas blocked by furniture and other obstacles. Pellet stoves efficiently heat a room with a double effect of warm air (convection) and infrared (radiant heat), combining the best features of oil fan heaters and wood stoves. Additionally, they excel in functionality, featuring easy-to-use and highly safe options such as automatic ignition systems, timers, and earthquake-resistant devices. Due to environmental issues and rising oil prices, pellet stoves are expected to gain more attention in the future. Our company has prepared a wide range of models with different heating capacities, designs, and functions at our headquarters showroom, allowing customers to choose one that fits their lifestyle. From simple, easy-to-read Japanese displays from domestic manufacturers to feature-rich, stylish, and powerful imported models, we can demonstrate over 10 models with live combustion at all times. If you are considering a wood stove, why not take this opportunity to look into a pellet stove? *For more details, please download the PDF or feel free to contact us.

• others

This document contains interview reports from individuals who have installed pellet stoves. We introduce the reasons many customers decided to install pellet stoves, where they installed them, and their impressions of use. A pellet stove is a heating device that uses small cylindrical pellets made from wood as fuel. It is an eco-friendly stove that does not use fossil fuels such as kerosene or gas, resulting in virtually zero CO2 emissions. [Contents (excerpt)] ■ No.137 Tsushin Fukujusou February 2016 issue ■ No.115 Tsushin Fukujusou March 2014 issue ■ No.163 Tsushin Fukujusou April 2018 issue ■ No.164 Tsushin Fukujusou May 2018 issue ■ No.121 Tsushin Fukujusou September 2014 issue *For more details, please refer to the PDF document or feel free to contact us.

• others

This document contains a list of our pellet stove sales agents. We have organized the company names, addresses, telephone numbers, and fax numbers by prefecture. A pellet stove is a heating device that uses small cylindrical pellets called wood pellets as fuel. [Contents] ■ Prefecture ■ Company Name ■ Address ■ TEL ■ FAX *For more details, please refer to the PDF document or feel free to contact us.

• others

In this document, we have included feedback from customers who used our snow melting system after one season. We present interviews such as "What prompted you to consider snow melting?" and "What made you choose our company?" If you have the ability to scan QR codes, please be sure to check out the video as well. 【Contents Included】 ■ What prompted you to consider snow melting? ■ What made you choose our company? ■ Actual usage experience *For more details, please refer to the PDF document or feel free to contact us.

• others

This catalog introduces exhaust pipes and accessories for pellet stoves that cater to various applications. We feature products such as the "Iron Single Straight Pipe," which is inexpensive, robust, and excellent for workability; the "Elbow Pipe 90° with Ash Check Window," which allows for easy ash checking and cleaning without removing the exhaust pipe; and the "Stainless Single Straight Pipe," which is lightweight, durable, and resistant to rust. These exhaust pipes come from MC, a brand from Italy, the home of pellet stoves. Please make use of this information when selecting products. 【Contents】 ■ Iron Pipes ■ White Iron Pipes ■ Stainless Pipes ■ Insulated Double Pipes ■ Peripheral Components ■ Duct Components ■ Drawings *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our pellet stove ash vacuum cleaner, 'CENETOP'. Equipped with a convenient brush nozzle, it captures ash with a double filter. By covering the tip of the nozzle with your hand and pressing the cleaning button 3 to 4 times, you can remove ash around the filter. The tank capacity is 18 liters, and it weighs 5.2 kg. 【Features】 ■ Captures ash with a double filter ■ Comes with a convenient brush nozzle ■ Ash removal function for the filter *For more details, please refer to the PDF document or feel free to contact us.

• others

"Thelma 90/Notabene 90" is a biomass stove equipped with a rotating combustion pot, allowing for the combustion of various biomass pellets without any issues, in addition to wood pellets. It features a newly designed combustion chamber that achieves high combustion efficiency. With a filter included, it produces clean warm air free of dust. You can choose between rear and top exhaust outlet options, and with the optional warm air switching valve, it is possible to change the location of the warm air output. 【Features】 ■ Equipped with a rotating combustion pot ■ Newly designed combustion chamber that achieves high combustion efficiency ■ Produces clean warm air free of dust due to the included filter ■ Options for rear and top exhaust outlet selection ■ Ability to change the warm air output location with the optional warm air switching valve *For more details, please refer to the PDF document or feel free to contact us.

• others

Our "Snow Melting System" can be customized on-site to match the roof shape and materials, allowing for quick completion of the construction. The snow melting pipes used are custom-made thick copper pipes, which, along with the snow melting panels, provide excellent durability and heat dissipation. An original automatic control device is included as a set. Additionally, it is possible to automatically melt snow on roofs and parking lots with a single boiler, even if they have different usage periods. 【Features】 ■ Equipped with a reliable automatic control device ■ Simultaneous snow melting for roofs and parking lots ■ Prompt response with comprehensive maintenance ■ Abundant track record and trusted technology ■ Capable of addressing customers' snow-related concerns immediately *For more details, please refer to the PDF materials or feel free to contact us.

• others

This catalog features products handled by Hokueki Yusetsu Co., Ltd., which imports and sells pellet stoves. We offer a wide range of models, including the compact "DISK E," a sealed model compatible with high airtight homes, standing at 83 cm tall, and the "ANIA," which exudes a unique luxury with its cylindrical heat-resistant glass exterior that evokes modern art. Additionally, we have the "Paterno P-14," a model characterized by its classic design reminiscent of a wood stove and its substantial appearance. [Featured Products] ■DISK E 6.7kW ■ALINA E 7.4kW ■ANIA 8kW ■NARA PLUS 9kW ■CHERIE UP 11.2kW, etc. *For more details, please download the PDF or feel free to contact us.

• others

The "maestrale (Diere Maestrale) 60" is a biomass pellet stove equipped with a unique patented bottom-fed fuel supply system, allowing it to burn various biomass pellets without any issues, in addition to wood pellets. It features wide three-sided glass, enabling you to enjoy the flames from any direction at 180°. The combustion pot requires no cleaning, and the large ash tray means you can be freed from the hassle of daily cleaning. The 27kg large-capacity pellet tank allows for long hours of continuous operation. It includes five levels of fine heat settings, various programmable timers, and room temperature control functions. 【Features】 ■ Distinctive design with wide three-sided glass ■ Patented bottom-fed fuel supply system ■ Sleek design with a sliding top plate ■ Equipped with a large-capacity ash tray for easy cleaning *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Paterno P-14" is a pellet stove characterized by its classic design and substantial appearance. With its wide front glass and broad combustion pot, it allows you to enjoy large and dynamic flames. At about 80 cm tall, it is compact, making it easy to refill with pellet fuel. It features an ON/OFF switch for the warm air fan and a quiet motor for fuel supply, resulting in very quiet operation. It offers five levels of precise heat settings, various programmable timers, room temperature control settings, and a self-cleaning function for the combustion pot. 【Features】 ■ Classic design ■ Self-cleaning function for the combustion pot ■ Quiet operation ■ Easy operation with a touch panel ■ Versatile installation options *For more details, please refer to the PDF document or feel free to contact us.

• others

"NARA PLUS" is a pellet stove that encapsulates powerful 9kW performance in a sleek, compact body. By extending the duct from the warm air outlet at the back, it can send warm air to other rooms, and the 24kg large-capacity pellet tank enables long hours of continuous operation. Using the included display remote control, you can set the heating power and the airflow of the two warm air fans to five different levels from a distance, as well as various program timers and room temperature control settings. 【Features】 ■ Humid heating through duct extension ■ Night mode with an OFF timer that can be set from 30 minutes to 12 hours later ■ Relaxation mode (natural convection) where the warm air fan stops ■ Standard equipped with a display remote control *For more details, please refer to the PDF document or feel free to contact us.

• others

"CENETOP" is a pellet stove ash vacuum cleaner with a convenient brush nozzle. It features a handy filter ash drop function. By covering the tip of the nozzle with your hand and pressing the cleaning button 3 to 4 times, you can drop the ash from the filter. [Features] - Double filters to catch ash - Convenient brush nozzle included - Filter ash drop function *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Stûv P-10" is a unique and practical pellet stove born in Belgium. It is designed to be installed in high airtight homes with an output of 2.5 to 8 kW and a high combustion efficiency of over 90%. With radiation heating that does not involve warm air, it achieves very quiet operation by adopting a bottom-loading pellet fuel system. The upper part of the body can rotate 45° to the left and right, allowing for a change in heating direction according to the usage scene. 【Features】 ■ Rotating head that allows for changing the heating direction by rotating the upper part of the body ■ Easy supply through the loading hatch provided at the lower part of the body ■ Standard equipped with a display remote control *For more details, please refer to the PDF document or feel free to contact us.

• others

The "14kW IDROSALLY" is a hot water heating pellet stove boiler manufactured by EdilKamin and handled by Hokueki Yusetsu Co., Ltd. One stove can also function as a hot water boiler, enabling hot water heating for underfloor heating and panel heaters. The hot air fan at the front of the unit can be switched between on (5 levels), off, and auto (where the hot air changes according to the heating power), allowing the room where the stove boiler is installed to be heated with hot air (output 3kW). It also has an 11kW hot water boiler function. 【Features】 ■ One stove can also function as a hot water boiler, enabling hot water heating for underfloor heating and panel heaters. ■ The hot air fan at the front of the unit can be switched between on (5 levels), off, and auto (where the hot air changes according to the heating power). ■ It is possible to heat the room where the stove boiler is installed with hot air (output 3kW). ■ 11kW hot water boiler function. ■ The combustion chamber uses highly durable cast iron and steel components. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "KIKKA 8kW/KIKKA PLUS 8kW" is a stove manufactured by Edilkamin and handled by Hokuetsu Yusetsu Co., Ltd. The stylish and sleek normal stove "KIKKA 8kW" features a simple design with a large glass door and a black steel exterior. The exhaust pipe outlet can be selected from the rear, top, or left side. Additionally, the warm air duct heating pellet stove "KIKKA PLUS 8kW" is a new model that adds duct heating functionality. By piping ducts from the rear warm air outlet (Φ80), it is possible to send warm air to another room. 【Features (KIKKA 8kW)】 ■ Simple design with a large glass door and black steel exterior ■ Exhaust pipe outlet can be selected from the rear, top, or left side ■ Control panel is located at the rear of the top plate (remote control is optional) ■ Combustion chamber is a combination of durable cast iron and steel plate ■ Three levels of heat settings, various program timers, and room temperature control function included *For more details, please refer to the PDF document or feel free to contact us.

• others