五幸商事 List of Products and Services

●Remote monitoring and control can be done anywhere using iPad and iPhone. ●The top screen can be viewed from Windows and smartphones. ●It can support all types of machinery and plant equipment. ●Simple operations can be performed based on the top screen. ●Customization can be easily done based on the basic screen.

• Other water treatment equipment
• Other process controls
• Other environmental equipment

Traditionally, ball valves and butterfly valves have been widely used as compressed air-operated automatic valves that can open and close quickly with low fluid flow resistance. However, they have had drawbacks in terms of "durability and high-speed operation." While these issues are rarely problematic under normal usage conditions, they can become significant in the switching valves for cooling water in the hot rolling lines of steel mills, where high frequency and high-speed opening and closing are required. Because the valve seat is equipped with a dynamic seal or metal seat, the repeated operations lead to wear and damage of the valve seat, making it difficult to maintain good sealing performance over a long period. The limit for the number of open and close cycles was around 100,000 to 200,000 times (or 10,000 to 20,000 times if the internal fluid is gas). Additionally, in cases of short opening and closing times (high-speed operation), the rapid stopping can cause a sudden pressure rise upstream of the valve due to water hammer phenomena, which adversely affects the seat packing and the valve body support bearings. This can lead to damage to the seat packing and support bearings, resulting in valve operation failure. To address these issues, we began the development of a cylinder valve as an automatic operating valve. As a result, we were able to not only solve the aforementioned problems but also complete the valve with various additional features.

• valve

Indoor Deodorizing Device Reflos Features Strong ozone breeze for powerful deodorization and disinfection The airflow is 3.7㎥/min. It deodorizes the room quickly with an upward airflow. With an ozone generation rate of 1,000mg/hour, it can also disinfect in small spaces. It effectively deodorizes areas of concern, such as hotel guest rooms and restaurants, where odors from tobacco and cooking are present, using the power of ozone. Easy operation, just wait for clean air By connecting the included cord to an outlet and pressing the button, the device starts a warm-up operation to prepare for ozone generation. After just a few minutes of waiting outside, the air will be refreshed. Class's lightest weight for easy portability Weighing only 4kg, it is the lightest in its class. Its easy portability allows for concentrated deodorization by placing it in areas where odors are a concern.

• Other water treatment equipment

Spot Deodorization Direct deodorization with ozone can be applied to the source of odors. Since it is a mist, it can deodorize specific areas that smell. Instant deodorization, Wide range of deodorization possible The mist maximizes the effectiveness of ozone. Ozone mist decomposes quickly, making it safe to enter the room during the deodorization process. Highly effective Deodorizes ingrained odors It is possible to deodorize odors that have penetrated into fabric products like curtains. Lightweight and compact Weighing only 7 kg, it is lightweight and comes with a shoulder strap, making it easy to move during use. Safe design

• Other water treatment equipment

You can utilize the excellent effects of ozone water. Generally, ozone water is said to have strong oxidative power, not only for deodorization but also for its tremendous effectiveness in disinfecting viruses and bacteria such as influenza virus, norovirus, and O-157. - Strong disinfecting power - No resistant bacteria formation - No impact on internal composition - No need for rinsing or washing - Strong deodorizing effect - Excellent freshness preservation ability Adopting a patented complete circulation discharge method, ozone gas is circulated, allowing for the efficient use of oxygen without generating waste ozone, achieving a high concentration of ozone water at 5.0 mg/L and a supply rate of 20 L/min. Due to its high concentration, it is also capable of disinfecting heat-resistant spores, mold, and yeast. This technology has enabled the excellent disinfecting, cleaning, and deodorizing power of ozone water to be utilized in a wider range of fields such as agriculture, food processing, and welfare. Environmentally and cost-friendly, the adoption of the complete circulation discharge method results in a running cost of about 10 yen per ton of ozone water. Ozone water can be used with the same sense as tap water. Additionally, the reduction in the amount of raw oxygen used makes this device environmentally friendly.

• Other water treatment equipment

Ozone Water Generator Goodbye Bacteria 20 Features Utilizes the excellent effects of ozone water Ozone water is generally known for its strong oxidizing power, which not only deodorizes but also has tremendous effectiveness in disinfecting viruses and bacteria such as influenza virus, norovirus, and O-157. Strong disinfection power No resistant bacteria develop, no impact on internal composition, no need for rinsing or rinsing, strong deodorizing effect, excellent freshness preservation ability. Speedy disinfection and easy cleaning with high-concentration ozone water Goodbye Bacteria 20 generates high-concentration ozone water of up to 6.0 mg/L, enabling quick disinfection. Ozone water safely decomposes into oxygen and water, and no rinsing is required after use. Quick installation and instant ozone! With just a power source and water supply, you can easily use ozone water by simply turning on the tap. It is also possible to convert hot water directly from the tap into ozone water. Convenient mobility with casters Equipped with casters, it allows for smooth movement between rooms. It is suitable for frequent movement during tasks such as floor cleaning.

• Other water treatment equipment

Easy to start without effort, even for women!

• Other pumps

It can be used by three people simultaneously, alleviating toilet congestion at event venues and similar places. It achieves loading efficiency and space-saving, making it easy to handle in terms of operation.

• others

We have resolved all the important aspects related to road construction, such as compliance with laws and regulations, mobility, safety, comfort, and design. The "design that doesn't look like a toilet" is also an attractive feature.

• others

Equipped with the "Smart Attach" mechanism that allows for the replacement of Western-style toilets, urinals, and hand wash basins with a single main unit. With a variety of optional settings such as a double waste tank that allows for insertion of the fork while remaining on the forklift, customization according to usage is also possible. Cleaning method

• others

Despite its compact appearance, it achieves both design and comfort. It offers a rich lineup, and its reasonable price is also appealing.

• others

We have created a high-quality space filled with a spacious indoor area and well-equipped specifications. The design aims to optimize cost, construction time, and space efficiency while also considering constructability.

• others

Features of Purecrete The revolutionary flooring material Purecrete, developed with the latest technology, has seven outstanding features. We confidently recommend it as a flooring material that meets all stringent safety standards, such as HACCP for food production facilities. Quick installation, moisture-resistant, odorless, mold-resistant, heat-resistant, impact-resistant, abrasion-resistant, acid-resistant, chemical-resistant.

• Coating Agent

Image Difference Comparison System Using AI Image Recognition This is a system that compares two different data types, such as documents, drawings, and photos, and extracts differences. With automatic correction using feature point recognition technology, any image can be corrected and compared. It has been implemented in over 400 companies, primarily in the construction and automotive manufacturing industries.

• Other image-related equipment
• Other services

In a large space, making each individual comfortable. With the compact air conditioner "MULTI CUBE," born from such needs, it is now possible to adjust the temperature for each unit according to the individual, even in large spaces like factories where air conditioning has been challenging compared to buildings and offices. We provide an air environment where everyone present can feel comfortable.

• Other air conditioning equipment
• air conditioning

Single-person spot cooler

• air conditioning

Waterproof and heat-insulating paint that is effective against "leaks" and "indoor temperature rise." Roof paint "EC-100PCM" protects buildings from leaks with a coating that stretches approximately 600%. Furthermore, it possesses high functionality with heat insulation that suppresses indoor temperature rise and weather resistance that continues to protect buildings for a long time.

• Chemicals
• paint

Energy Saving Contributes to significant reduction in electricity costs compared to previous blowers. Also greatly reduces CO2 emissions. Uses only the necessary air volume with a built-in inverter, avoiding unnecessary electricity usage. The payback period for initial costs due to replacement is as short as 2 years. (Based on specific specifications, we will provide proposals.) Low Maintenance Daily maintenance consists only of filter cleaning. Being oil-free keeps the working environment clean. Easy operation with a touch panel. Space Saving When replacing existing equipment, the current foundation can be utilized. Compact facilities lead to reduced construction costs. Low Noise Low noise allows for cost savings on soundproofing equipment. The working environment in the blower room is also good and friendly to people.

• Pneumatic Equipment

This is a dynamic product that forms a membrane of ETFE in the liquid-contact part through thick film lining by rotational molding. Unlike conventional coatings, it has high adhesion strength, is difficult to penetrate, and can be connected to ISO standards.

• valve

Features ◆ Creates a comfortable outdoor space It blows cool air in four directions—front, back, left, and right—with a large airflow, creating a comfortable area up to about 3 meters away from the unit. ◆ Can be installed in any location Since the indoor and outdoor units are integrated, no refrigerant piping work is required. *Electrical work and drain piping work are necessary. ◆ Simple design that does not stand out in outdoor spaces Adopts a tower-shaped design that harmonizes with the open atmosphere of outdoor environments.

• air conditioning

Rotating Machinery Simple Monitoring System

• Other safety equipment

This is an all-Teflon membrane filter. It not only excels in chemical resistance and heat resistance, but also ensures a high surface area through our unique pleating technology, achieving high flow rates, low pressure loss, and long life. It is suitable for the filtration of concentrated acids and high-temperature acids. We conduct integrity tests on all products, so you can use them with confidence. A pre-wet type is also available.

• filter

This is a membrane filter that uses polypropylene with a PTFE support in the filter media. It is suitable for tank air vent filters and the filtration of chemicals. All products undergo integrity testing, ensuring safe use. Additionally, we also offer a type that uses a hydrophilic PTFE membrane.

• filter

Due to its excellent hydrophilicity, no pretreatment with alcohol or other substances is necessary. It exhibits excellent filtration performance with organic solvents, high-temperature water, and alkalis. It has a large effective filtration area, achieving high flow rates, low pressure loss, and long life. All products undergo integrity testing, ensuring safe use.

• filter

This is an asymmetric polyether sulfone membrane filter. Due to its asymmetric structure, it achieves high porosity, high flow rate, low pressure loss, and long life. It has extremely low leachables, and a small amount of rinsing can restore the non-resistance value. It is suitable for ultra-pure water production applications and the sterilization of process water. A steam sterilization-compatible type is also available.

• filter

The filter media is a pleated type filter made of micro glass fiber. It effectively removes fine particles from liquids and gases. It is also suitable for high-viscosity fluids such as polymer products. A steam sterilization compatible type is also available.

• filter

This is a high-flow pleated filter. It can accommodate filter media from various series. A flow rate of 200 L/min can be achieved per unit. It helps to save space in the line. Manufactured in a clean room, all products undergo integrity testing, ensuring safe use.

• filter

An environmentally friendly cartridge filter has been introduced. It generates one-third the waste compared to conventional depth filters due to extended filtration life and other factors. The material composition consists of high-purity polypropylene, and in the DOE type, the sealing material is foamed polypropylene, which eliminates cost increases due to gasket material. Components that comply with food standards are used.

• filter

This is a pleated filter made of polypropylene. It is integrally molded, binder-free, and uses long fiber non-woven fabric, so there is no concern about fiber shedding or binder material leaching. With its unique multi-layer structure media, it achieves long life and can also remove gelled foreign substances. We also offer a high flow type with an outer diameter of 80mm and a steam sterilization compatible type. Additionally, there are nominal and absolute filtration precision options available.

• filter

This is a spool (wind type) filter. It features a diamond type with a density gradient. The media materials available are polypropylene and cotton types. Compared to conventional products, it is less likely to produce foam and offers a wide range of filtration precision, making it suitable for a variety of specifications.

• filter

This is an innovative cartridge filter. Advanced technology has fused depth filters and pleated filters, which were previously considered technically impossible. The hybrid, integrally molded Cosmo series has achieved unprecedented filtration. It is particularly suitable for filtering fluids that contain a mixture of gel-like foreign substances and hard particles. Additionally, lines that previously required two-stage filtration with a pre-filter and a final filter can now be handled with a single-stage filtration using the DFAH, leading to space and cost savings.

• filter

This is the absolute type of DFYP. It has a continuously variable density gradient in the internal structure of the media section, allowing for smooth filtration without any layers from the surface pleat to the final stage. During the manufacturing process, it is thoroughly cleaned with 100% pure water, making it an extremely clean depth filter. The flat type is equipped with a gasket made of foamed polypropylene, which improves sealing compared to conventional products.

• filter

This is a depth filter created using innovative melt-blown technology. It has a continuous three-layer density gradient, which allows for a long lifespan. The media section is composed of ultra-fine microfibers, providing precise filtration accuracy, and by eliminating the center core, it achieves initial pressure loss of less than one-third of that of conventional melt-blown filters. Additionally, since the manufacturing process does not use any additives or binders, it can be safely used in the production lines of electronic components, pharmaceuticals, and food.

• filter

This is a stainless steel metal type filter that is washable, heat-resistant, and available in three types: sintered fiber, sintered mesh, and sintered powder. For the sintered fiber and sintered mesh types, we offer two variations: pleated type and cylinder type.

• filter

Features ☆ If there is a water source such as a river, fire-fighting water, or pool water, it can quickly remove viruses and bacteria to provide safe "drinking water"!

• Other water treatment equipment

"NUKOTE Polyurea" is a lining material that possesses "strength" comparable to concrete and "flexibility" that allows it to follow the shape of the substrate without cracking, even when it changes. With spray application, it is possible to cover several hundred square meters per day. It cures quickly within seconds to minutes, allowing for foot traffic approximately one hour after application. It excels in waterproofing, chemical resistance, heat resistance, and weather resistance, protecting the substrate from a wide range of deterioration factors. It is available in heated curing, room temperature curing, and hand application types. [Features] ■ Follows cracks in the substrate to maintain waterproof performance ■ Grades with over 400% elongation are available ■ Layer composition can be selected according to application and substrate ■ Protects the substrate for long periods even in environments where various deterioration factors are combined ■ Solvent-free and has low environmental impact *For more details, please refer to the materials. Feel free to contact us. (You can view the materials from Kanamori Tōhei Trading Company. Gokō Trading Company is the sales agent for Kanamori Tōhei Trading Company.)

• others

Dust removal is possible from above using the ceiling-mounted blowout nozzle. It can accommodate various structures such as multi-connection types (tunnel type), L-shaped and T-shaped door positions, automatic doors, and built-in sheet shutters.

• Other clean room equipment and facilities

The MCB type is a clean booth that uses an aluminum frame. Aluminum materials are excellent in both strength and appearance, and can accommodate short delivery times. The clean booth can be manufactured to fit the installation location, maximizing the effective use of space. It can also accommodate special designs such as large sizes.

• Clean Booth

It is a kit that can be assembled by the customer themselves and does not require special tools. Due to the standardization of components, delivery can be made within one week after the order. The entrance and exit are zipper-type. Its simple structure allows for easy disassembly and relocation.

• Clean Booth

When the entrance to the warehouse or preparation room is opened, a large number of insects flow in. The insect-repellent air curtain is a device that prevents the intrusion of insects when the door is open. It is designed to match the door opening. Additionally, it can be integrated with a high-speed sheet shutter.

• Other clean room equipment and facilities

When the entrance to the warehouse or preparation room is opened, a large number of insects flow in. The insect-repellent air curtain is a device that prevents the intrusion of insects when the door is open. It is designed to fit the opening of the door. Additionally, it can be integrated with high-speed sheet shutters.

• Other clean room equipment and facilities

Traditionally, ball valves and butterfly valves have been widely used as compressed air-operated automatic valves that can open and close quickly and have low fluid flow resistance. However, they have had issues with "durability and high-speed operation." These issues are rarely problematic under normal usage conditions, but they can become significant in the switching valves for cooling water in the hot rolling lines of steel mills, which are used for high-frequency and high-speed opening and closing. Because the valve seat is made of a dynamic seal or metal seat, repeated operations lead to wear and damage of the valve seat, making it difficult to maintain good sealing performance over long periods. The limit for the number of open and close cycles was around 100,000 to 200,000 (about 10,000 to 20,000 cycles if the internal fluid is gas). Additionally, in cases of short opening and closing times (high-speed operation), the rapid stopping can cause a water hammer phenomenon, leading to a sudden pressure rise upstream of the valve, which adversely affects the seat packing and the valve body support bearings. This can damage the seat packing and support bearings, rendering the valve inoperable. To address these issues, we began the development of a cylinder valve as an automatic operation valve. As a result, we were able to not only solve the aforementioned problems but also complete the valve with various additional features.

• valve

This is a polyethylene tank molded as a single piece using the rotational molding method.

• tank

• Piping Materials

Similar to sand filtration, our unique filter media cleaning method (patented) allows for the prolonged maintenance of activated carbon's adsorption performance, significantly reducing running costs.

• Other environmental equipment