OLFA CORPORATION Product Lineup

The blade has a sharp angle of 30 degrees, allowing for a clear view of the cutting edge and enabling precise pinpoint cuts where intended. It uses a snap-off blade design, so when the sharpness dulls, you can simply snap off the blade and continue working without interruption. With its auto-lock mechanism, there is no worry of the blade moving while cutting. 【Features】 ■ Replaceable blade ■ Auto-lock mechanism ■ Ambidextrous ■ Suitable for detailed work

• cutter
• Work tools
• Cutter/Scissors

A professional craft art knife with a rubber grip that reduces hand fatigue even after long hours of use. In addition to the included straight blade, curved blade, and flat blade, it can also accommodate separately sold plastic cutting blades (for plastic), scraping blades, and narrow flat blades, expanding the range of tasks you can perform. Its cylindrical shape includes a non-roll feature, and it comes with a protective cap, allowing for safe use both in terms of work surface and management. 【Features】 ■ Replaceable blades ■ Ambidextrous

• cutter
• Paper and pulp products
• Cutter/Scissors

This is a cutting knife with an adjustable blade length due to its screw lock mechanism. The blade is sliding, allowing it to be stored inside the main body when not in use. The grip and blade are made of stainless steel, making it suitable for outdoor use. Minor dirt can be washed off with water. It is convenient to hang it by threading a cord through the hole at the back of the main body. 【Features】 ■ Stainless steel blade ■ Single blade ■ Replaceable blade ■ Screw lock mechanism

• cutter
• Other food factory equipment and parts
• Cutter/Scissors

Fabric and paper. Can cut materials like film into circles with a diameter of 4 to 22 cm. For patchwork, handicrafts, DIY, and design work. You can cut by holding the black grip and rotating it clockwise to draw a circle. *When cutting small circles, repeat "twist the handle slightly and then return it slightly." 【Features】 ■ Replaceable blade ■ Handle with ratchet mechanism ■ Blade cover/needle cover included

• cutter
• Cutter/Scissors
• Nonwoven

Have you ever thought about just carrying a cutter while working? With a waist pouch, you can carry various tools, which can sometimes get in the way during work. In such cases, carrying just a cutter can make your work easier. The quick holder has a locking feature, so it securely locks in place just by inserting it when storing. The holder can move 30 degrees to the left and right, allowing for smooth insertion and removal. The belt loop is made of soft elastomer resin, which is less likely to get in the way even when crouching. 【Features】 ■ Comes with a Hyper AL type cutter ■ A holder without a cutter is also available for sale (246B) ■ Equipped with a mounting hole for attaching a fall prevention cord ■ Made of reinforced polypropylene with excellent strength, durability, and solvent resistance, containing glass fibers.

• cutter
• Other work tools
• Other factory equipment and parts

Have you ever packaged a cutter while it was still inside a cardboard box? There have been instances where the cutter itself ended up in the cardboard box, and it was packaged without anyone noticing. If the box is opened and the cutter is still exposed, it could lead to injuries. To prevent the cutter from being included in the packaging, you can solve this issue by attaching a "fall prevention cord" while working. Please feel free to inquire about cutters that can be equipped with a fall prevention cord. 【Recommended for】 - Those troubled by foreign object contamination - Those who want to improve cutter management - Those looking to reassess their work environment for safety.

• cutter
• Cutter/Scissors
• Work tools

We regularly deliver the latest information to our newsletter subscribers. ■ Product information including new products ■ Useful information and case studies ■ Exhibition and media information and more. Registration is free, so why not take this opportunity to sign up? The registration process is simple! You can either "Contact us via the web" or download the catalog and register from the "Registration" section within the catalog. We look forward to your registration!

• cutter
• Cutter/Scissors
• Work tools

A large cutter with excellent sharpness featuring a specially made black blade with a sharp angle two-stage grind and a fluorine coating on the cutting surface. It significantly reduces resistance during cutting, allowing for smooth operation and a light cutting feel. Ideal for packaging, unpacking, and cutting Harepane (hollow panels). The tool's claws are convenient for opening paint can lids and bending cardboard. The X-design rubber grip prevents slipping when held, ensuring a firm cut. 【Features】 - Auto-lock mechanism that can be locked with one touch - Replaceable blade - Compatible with separately sold wavy blades (ideal for slippery materials). *For more details, please contact us.

• cutter
• Other factory equipment and parts
• Cardboard

A scraper suitable for tasks such as peeling and scraping. The head is strong against impact, allowing for hard work by striking the grip end. With a length of 600 mm, it is suitable for high-altitude work and tasks that require both hands. The blade is a thick type with a thickness of 0.8 mm. You can also attach a separately sold 0.5 mm thick blade, a flexible blade that transmits force appropriately, or a replacement blade (large) for a utility knife. When not in use, it can be managed with a clip-type blade cover. We will provide you with a collection of "Near Miss Case Studies - Scraper Edition." Please download and make use of it. 【Features】 ■ Replaceable blade type ■ Usable for both left and right hands ■ A fall prevention cord can also be attached *For details, please contact us.

• cutter
• Other cleaning tools
• paint

A variable head with an adjustable blade angle. The head can be oriented in 11 different patterns. It can be used for tasks like scraping or cutting leather during leathercraft. You can use it at an angle that makes work easier. When not in use, it comes with a cover for safe storage. 【Features】 ■ Screw lock type ■ Replaceable blade type ■ Ambidextrous ■ A fall prevention cord can be attached to the hole at the rear of the main body *For more details, please contact us.

• cutter
• Cutter/Scissors

The small cutter with a screw lock mechanism is back, making it easy to hold and use. For delicate cutting work like paper cutting, hold it like a pencil, and when you want to cut firmly, place your index finger or thumb on the side to transfer force for easier cutting. Since it has a screw lock mechanism, you can adjust the blade length yourself. 【Features】 ■ Replaceable blade type ■ Compatible replacement blades: Small replacement blade (attached blade), special black blade (small), stainless replacement blade (small) ■ A fall prevention cord can be attached to the hole at the back of the main body ■ The grip area is wide, making it easy to hold *For more details, please contact us.

• cutter
• Cutter/Scissors
• Office supplies and stationery

This is a perforation cutter that is convenient for making tickets, paper crafts, and scrapbooking. With a regular cutter, you would cut through to the paper underneath, but since it has perforated lines, you can easily tear off only the necessary parts by hand. Cutting the edges of planners or magazines can also serve as a marker. Additionally, when not in use, you can return the black lever to cover it, making it safe for storage. 【Features】 ■ For paper, film, vinyl, etc. ■ Replaceable blade type ■ Compatible replacement blade: Perforation rotary blade 28 ■ Can also be attached to the separately sold 233B rotary cutter 28. ■ Ambidextrous *For more details, please contact us.

• cutter
• Work tools
• Cutter/Scissors

OLFA, a pioneer of utility knives, supports those in need on-site. You can download the following materials from 【Download Catalog】: - 【How to Use a Utility Knife】 document * Videos (in Japanese and English) are also available. If you need them, please feel free to contact us. - 【Near Miss Case Studies】 - 【Leaflet for Solving Injuries and Foreign Object Contamination】 - 【Leaflet for Preventing Cutting Accidents】 - 【Safety Product Series】 leaflet - 【OLFA Comprehensive Catalog 2024 Edition】 We also accept inquiries about product samples, other materials, and product videos. Please feel free to reach out to us. 【Recommended for】 - Those who want to reduce cutting accidents - Those troubled by foreign object contamination - Those looking for safe cutters - Those who want to review their work environment for safety.

• cutter
• Cutter/Scissors
• Other factory equipment and parts

We would like to introduce the "Compass Cutter" that we handle. This convenient cutter allows you to cut thin materials such as paper and vinyl film into circular shapes, using the same technique as a compass. It can cut diameters ranging from 1 cm to 15 cm, and when using the hole-preventing plate, it can cut diameters from 4 cm to 15 cm. *The hole-preventing plate has a needle attached to the black axis in the center of the plate, which prevents a hole from being made in the center of the material being cut. 【Features】 ■ Replaceable blade type ■ Usable for both left and right hands ■ Compass cutter replacement blades ■ 5 replacement blades built into the protective cap ■ Comes with a hole-preventing plate *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• Work tools
• cutter

We would like to introduce our "Ratchet Compass Cutter" for cutting circles. With a ratchet mechanism on the handle, you can easily cut circles with a diameter of 1.6 to 22 cm without straining your wrist. Additionally, it comes with a hole prevention plate, allowing you to cut circles with a diameter of 4 to 22 cm when using the plate. *By inserting the black axis needle in the center of the hole prevention plate, you can avoid making holes in the material being cut. 【Features】 ■ Comes with a hole prevention plate ■ Replaceable blade type ■ Includes 10 replacement blades *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• cutter
• Work tools

We would like to introduce the "Marucutter 45 C-type" that we handle. It is designed to minimize damage to the underlying surface and the contents of packages, featuring a 45mm diameter circular blade that allows for safe scooping cuts with minimal blade exposure. It can be used for cutting various sheets, such as carpets and air caps. 【Features】 ■ Replaceable blade ■ Ambidextrous ■ 45mm circular replacement blade *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• Cushioning material
• Other safety and hygiene products

We would like to introduce the "Hobby Rotary" that we handle. This rotary cutter is equipped with a small 18mm diameter stainless steel blade that can easily cut small curves. It can cut difficult materials such as fabric, paper, thin rubber sheets, and films. The circular blade allows for smooth cutting of both straight lines and curves, making it suitable for cutting fabric. 【Features】 ■ Replaceable blade type ■ Ambidextrous ■ Stainless steel blade ■ 18mm circular replaceable blade (installed blade) ■ Can also accommodate perforated rotary replacement blades (sold separately) *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• Rubber
• Work tools

We would like to introduce the "Rotary Cutter 45/28" that we handle. It is a rotary cutter equipped with a circular blade, featuring a replaceable blade system that is ambidextrous and allows for easy one-touch blade replacement. Additionally, it can effortlessly cut through difficult materials such as fabric, paper, thin rubber sheets, and films. Since the blade is circular, it can cut both straight lines and curves, making it suitable for cutting fabric. 【Features】 ■ Replaceable blade system ■ Ambidextrous ■ One-touch blade replacement 【Model Numbers】 ■ Rotary Cutter 28 (233B) ■ Rotary Cutter 45 (234B) *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• Rubber
• Nonwoven

We would like to introduce our "Rotary Compass Cutter." This rotary cutter is equipped with a 60mm diameter circular blade suitable for cutting thick materials and multiple layers. It can easily cut through difficult materials such as fabric, paper, rubber sheets, and films. 【Features】 ■ Replaceable blade ■ Ambidextrous ■ 60mm circular replacement blade *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• Nonwoven
• Rubber

We would like to introduce our "Rotary Compass Cutter." This is a circular blade cutter with a ratchet mechanism handle, capable of cutting circles with a diameter of 4 to 22 cm. Additionally, it allows you to easily and neatly cut fabric, paper, film, etc., in a circular shape by drawing a circle. 【Features】 ■ Replaceable blade ■ Stainless steel blade ■ 18mm circular blade replacement *For more details, please download the PDF or feel free to contact us.

• Cutter/Scissors
• Nonwoven
• cutter

**Overview** The "Hyper L Type Gray," a large cutter knife from Olfa Corporation's X Design Hyper Series, boasts exceptional sharpness and durability with its specially designed black blade as standard. Its design pursues a shape that prevents slipping when held and allows for easy application of force, ensuring comfortable work. **Features** * X Design: Designed for easy grip and force application, making it less tiring to use for extended periods. * Specially Designed Black Blade: A unique Olfa blade that combines sharpness and durability. * Large Blade: Easily cuts through thick materials. * Safety Design: Equipped with a safety mechanism that allows the blade to be retracted for safe use. * Gray Color: A calm color that blends well in any work environment.

• cutter
• Cutter/Scissors
• Work tools

**Overview** The "Hyper L Type Gray," a large cutter knife from Olfa Corporation's X Design Hyper Series, boasts exceptional sharpness and durability with its standard equipped special black blade. Its design pursues a shape that prevents slipping when held and allows for easy application of force, ensuring comfortable work. **Features** * X Design: Designed for easy grip and force application, making it less tiring to use for extended periods. * Special Black Blade: A unique blade from Olfa that combines sharpness and durability. * Large Blade: Easily cuts through thick materials. * Safety Design: Equipped with a safety mechanism that allows the blade to be retracted for secure use. * Gray Color: A calm color that blends well in any work environment.

• cutter
• Cutter/Scissors
• Work tools

**Overview** The "Hyper AL Type Gray," a large cutter knife from Olfa Corporation, is confidently introduced as part of the X Design Hyper Series. It comes standard with a special black blade, boasting exceptional sharpness and durability. **Features** * Ergonomic X Design for easy grip and force application - Its shape minimizes fatigue even during prolonged use. * Large blade for smooth cutting of thick materials - It can cut through thick materials like cardboard and heavy paper with ease. * Special black blade for outstanding sharpness and durability - Olfa's unique technology achieves a sharp and long-lasting blade. * Safety design for secure use - It features a safety mechanism that retracts the blade, preventing accidental contact with the blade.

• cutter
• Cutter/Scissors
• Work tools

This document introduces examples of near-miss incidents that occurred while using a utility knife. It includes cases such as leaving the blade extended while placing it on a box, which nearly caused injury when someone else touched it, and instances where the blade broke and flew off while working with it extended too far. By raising awareness and changing tools, potential injuries during work can be prevented, so please make use of this information. [Contents (partial)] ■ Blade left extended (1) ■ Blade left extended (2) ■ Blade extended too far ■ When replacing the blade ■ Getting carried away ■ Placing fingers in the direction of the blade *For more details, please download the PDF or feel free to contact us.

• cutter
• Cutter/Scissors

To ensure that our products are used safely and correctly, we continue to provide information on the proper use of utility knives and the introduction of safety cutters. Please choose a cutter with an appropriate blade thickness and width for the material you are cutting, such as a small blade for thin paper and an M-thick blade or thicker for cardboard. Selecting the right cutter can enhance safety and work efficiency. Additionally, it is very dangerous to place your hand in the direction the blade is moving. Please be cautious about the position of your hand while holding. 【Timing for Blade Replacement】 ■ When you feel it is difficult to cut ■ When the blade is rusty ■ When the blade is chipped *For more details, please download the PDF or feel free to contact us.

• cutter
• Cutter/Scissors

The "SAFETY FIRST Series" is a series of utility knives designed with safety in mind. It includes the "Kaikon," which allows for safe and easy unpacking, the "All Metal Safety Cutter" with a highly cleanable all-stainless steel body, and the "Hyper L-Type and AL-Type," known for their ease of grip. This is a proposal from Olfa for safe working tools to address injuries and foreign object contamination. 【Kaikon Features】 ■ The blade is difficult to touch with fingers ■ Minimizes the risk of damaging contents ■ The tip of the body features a convenient tape slitter ■ Smooth cutting performance with a high-hardness stainless steel blade ■ Holder with excellent resistance to wear and solvents ■ Attaching a cord reduces the risk of dropping the body or contamination of items *For more details, please download the PDF or feel free to contact us.

• cutter
• Other safety and hygiene products
• Cardboard

This document summarizes the correct use of a utility knife. It explains 18 items, starting with checking and confirming the utility knife to be used, organizing the workspace, handling it in optimal physical condition, using a utility knife suitable for the material being cut, and using a utility knife that matches your dominant hand. After finishing your work, please do not leave the utility knife unattended; make sure to put it away. It is reassuring to always store it in a designated place. 【Contents (partial)】 ■1. Checking and confirming the utility knife to be used ■2. Organizing the workspace ■3. Being in optimal physical condition ■4. Using a utility knife suitable for the material being cut ■5. Using a utility knife that matches your dominant hand ■6. Using a cutting mat *For more details, please download the PDF or feel free to contact us.

• cutter
• Cutter/Scissors

This is a portable blade breaker that allows you to easily snap the blade when it becomes dull during use, and the broken blades can be stored inside. It has a high degree of freedom in how the blade is inserted, making it easy to insert the blade by sliding the tip in. When the container for broken blades is full, you can simply dispose of the contents. It is solvent-resistant, so you can clean off any residues like oil with thinner (do not soak it). 【Features】 ■ Improved workability and safety ■ Slim size that fits easily in a tool pouch ■ Please fold in the direction of the mountain fold against the blade's break line ■ Compatible with snap-off blade utility knives (some bodies are not compatible) ■ Dispose of the blades inside the breaker when full (follow your local municipality's instructions for blade disposal).

• cutter
• Other work tools
• Cutter/Scissors

We offer "Art Knives" that reliably support tasks such as model making, crafts, and design work with precision cutting. Our lineup includes the pen-type "Designer's Knife," suitable for cutting thin materials and tiny parts, and the "Limited SK," a folding blade craft knife with a 30° sharp angle that allows for clear visibility of the cutting edge, making it ideal for detailed work. All of these knives feature replaceable blades and are ambidextrous. Please contact us if you have any inquiries. 【Features】 ■ Designer's Knife/Designer’s Knife (Stationery Only) - The grip firmly secures the blade, preventing wobbling and ensuring comfortable precision work. ■ Art Knife/Art Knife (Stationery Only) - A pen-type knife suitable for fine work. ■ Limited SK - The body has a glossy silver finish, while the blade holder features a semi-gloss black baked coating that is characterized by its elegant beauty. *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Work tools

We would like to introduce our "Blade Breaker," which safely breaks blades. We offer a wide range of professional-grade products, including the "Poki PRO," which can be attached to a waist pouch or belt, and allows for easy blade breaking without fear using a light force with the blade break lever, as well as the "Poki Station," and the "Safe Blade Disposal Device Poki," which ensures the proper disposal of broken blade-type utility knives. Please choose your preferred type according to your application and environment. 【Features】 ■ Poki PRO - Designed for easy insertion into the slit area, allowing for smooth blade breaking. - Broken blades can be disposed of collectively through the blade disposal opening at the top of the main unit. ■ Poki Station/Poki Station (Stationery Only) - Blades break inside the unit, eliminating the worry of blades flying out accidentally. - Can be used as both a tabletop model and a handheld model. *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Office supplies and stationery

We would like to introduce our "Professional Interior Cutter Knife" that we handle. The auto-lock long type cutter knife allows you to use a new blade edge 21 times with just one blade, including the "Special Long," "Special Long 038," and "Special M Type Long," as well as the compact "Special A Type" equipped with a special black blade (small). Additionally, we offer the medium-sized cutter knife "Special M Type" equipped with the ultra-thin special black blade (medium) with a blade thickness of 0.25mm, which minimizes the visibility of the cut edge. 【Features】 ■ Developed for the purpose of cutting wallpaper ■ Replaceable blade type ■ Auto-lock *For more details, please refer to the related links or feel free to contact us.

• cutter
• Other work tools
• Cutter/Scissors

The "DA-1" is a compact cutter knife with an integrated blade breaker that allows for easier blade handling regardless of location. The blade breaker can be easily removed and attached with a single touch. It can store approximately two blades, allowing for bulk processing. Please contact us if you have any inquiries. 【Product Overview】 ■Model Number: 208B ■Replaceable Blade Type ■Auto Lock ■Ambidextrous *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Work tools

The "MZ-S Type/Limited MA" is a rapid-fire compact cutter knife that can hold up to 5 blades built into the main body. This design eliminates the hassle of blade replacement, allowing for efficient continuous use. Additionally, it comes with 2 replacement blades pre-installed at the time of shipment. Please contact us if you have any requests. 【Features】 ■ Blades can be easily set from the back ■ Auto-lock ■ The body has a silver paint finish with a one-point design (Limited MA) *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

We would like to introduce our compact blade-type utility knives, each featuring a unique design and functionality. Starting with the "A Plus," which emphasizes ease of use down to the finest details, we also offer the "Hyper A Plus" from the X Design Hyper Series, and the "Silver," made of stainless steel with a slim design that resists rust even when wet, among other products that excel in various scenarios. Please contact us if you have any inquiries. 【Features】 ■ A Plus / A Plus (Stationery Only) - A slim shape that is easy to hold in hand, allowing for comfortable work. ■ Hyper A Type - Double injection molded rubber grip. ■ Limited FA - Features a unique one-way lock mechanism that securely locks during use and is designed for safety, allowing the blade to easily return to the holder even if dropped. *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Office supplies and stationery

The "Hyper M Thick Type / Universal M Thick Type" is a cutter knife that, despite its slim form, is equipped with a blade thickness of 0.45mm, combining the strength of a large blade with the convenience of a small blade. The "Hyper M Thick Type" features a hole for attaching a fall prevention cord and has a claw that is useful for unpacking tasks and opening paint can lids. Additionally, the "Universal M Thick Type" is designed in a compact size that is easy to handle, even for those who are not accustomed to using large cutter knives. 【Features】 ■ Auto-lock type that securely locks with one touch ■ M thick type blade that combines the advantages of large and small blades ■ Hole for attaching a fall prevention cord and a claw that is useful for unpacking tasks and opening paint can lids (Hyper M Thick Type) ■ Easy-to-handle compact size (Universal M Thick Type) ■ For replacement blades, please purchase "Olfa Cutter Replacement Blade (M Thick)." *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "LL Type" is a large cutter knife with a screw lock mechanism, convenient for cutting thin plywood, rubber sheets, thick paper, and more. Since the main body of the cutter knife can be securely held with both hands, it allows for more powerful cutting. This product is part of a large blade series designed for professional use, emphasizing not only sharpness but also grip stability and blade strength, ensuring reliable cutting and processing in various situations. 【Product Overview】 ■Model Number: 1B ■Screw Lock Mechanism ■Replaceable Blade Type ■Accessories: Includes 2 replacement blades *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "DL-1" is a large blade series product that integrates a blade breaker and an auto-lock large cutter knife. The blade breaker can be easily removed and attached with one touch. It can store approximately two blades, allowing for bulk processing. Blade disposal can be done more easily without worrying about the location. 【Features】 ■ Integration of a blade breaker and an auto-lock large cutter knife ■ The blade breaker can be easily removed and attached with one touch ■ Can store approximately two blades for bulk processing *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "MZ-AL type" is a large cutter knife that can hold up to 6 blades internally in a continuous firing mechanism. It eliminates the hassle of blade replacement, allowing for efficient work as it can be used continuously. The blades are easily set by inserting them from the back. To replace a blade, pull it out until the slider stops, and then return the slider fully to set the next blade. 【Features】 ■ Blades are inserted from the back (can hold up to 6 blades) ■ Comes with 3 replacement blades (large) included at shipment ■ Awarded the Good Design Award *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

Introducing the large cutter knife 'OL type' with a special blade shape that minimizes blade wobble and allows for cutting with a long blade length. It can be used for cutting carpets and is also convenient for holding down the edges of carpets with its claw feature. This product from the large blade series is designed for professional use, focusing not only on sharp cutting performance but also on grip stability and blade strength to ensure reliable cutting and processing in various situations. 【Product Overview】 ■ Model Number: 5B ■ Replaceable blade type ■ Screw lock *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "Super L-Type" is a large utility knife equipped with a convenient claw for opening craft tape, bending cardboard, and opening paint can lids. It features a screw lock mechanism that securely holds the blade in place. Additionally, a case is also available. Please contact us if you are interested. 【Product Overview】 ■Model Number: 174B ■Replaceable Blade ■Screw Lock ■Rubber Non-Slip Grip *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Work tools

The "Limited NL/AL" is a large blade series cutter knife designed for professional use, emphasizing not only sharpness but also grip stability and blade strength, ensuring reliable cutting and processing in various situations. It features a rubber grip that fits comfortably in the hand. You can choose between a screw lock type that securely fixes the blade to the tip and an auto-lock type that locks firmly with a single touch. 【Features】 ■ The refined design and form of the Limited series ■ Equipped with a special black blade ■ Screw lock type that securely fixes the blade to the tip (Limited NL) ■ Auto-lock type that locks firmly with a single touch (Limited AL) *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "Crank Hyper AL Type" is a large cutter knife from the X Design Hyper Series, which pursues a shape that is easy to grip and apply force without slipping. The M-shaped claw at the back of the main body can be used for tasks such as "prying open," "scoring," and "unpacking," and it can also assist in removing screws that are spinning freely. Additionally, it features a crank shape that makes it easy to insert into gaps. It has an auto-lock mechanism that securely locks with a single touch. 【How to Remove a Spinning Screw (Gypsum Board, Plywood)】 (1) Slide the claw under the screw head. (2) While pressing the claw against it, turn the screw with a screwdriver. *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "Speed Hyper L-Type/AL-Type (Hardware/DIY)" is a large blade series cutter knife designed for professional use, focusing on grip stability and blade strength. It features a specially treated black blade with a fluorine coating, providing an incredibly light cutting experience, equipped with a speed blade suitable for cutting cardboard and styrene boards. The "Speed Hyper L-Type" has a screw lock mechanism that securely fixes the blade to the tip, while the "Speed Hyper AL-Type" features a one-touch auto-lock mechanism for secure locking. 【Features】 ■ A large cutter knife from the X (X) Design Hyper Series, designed to prevent slipping and allow for easy application of force when held. ■ Equipped with a claw for convenience in packaging/unpacking tasks and opening paint can lids. *For more details, please refer to the related links or feel free to contact us.

• cutter
• Other work tools
• Cardboard

The "X Hyper L Type/AL Type" is a large blade series cutter knife designed for professional use, emphasizing not only sharpness but also grip stability and blade strength, ensuring reliable cutting and processing in various situations. It features a double injection molded rubber grip. There are also versions specifically designed for stationery. The large drop prevention cord attachment hole at the rear of the main body is compatible with various fittings, helping to prevent drops and loss, as well as aiding in storage, making it suitable for work environments where safety management is strictly required. 【Features】 ■ X Hyper L Type - Screw lock type that securely fixes the blade to the tip. ■ X Hyper AL Type - Auto lock type that securely locks with a single touch. *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools

The "Hyper L Type/AL Type" is a large cutter knife from the X Design Hyper Series, which pursues a shape that is easy to grip without slipping and allows for easy application of force. It features a double injection molded rubber grip and comes with a claw that is convenient for packaging and unpacking tasks, scoring cardboard, and opening paint can lids. The "Hyper L Type" uses a screw lock system that securely fixes the blade tip, while the "Hyper AL Type" employs a one-touch auto-lock system for secure locking. 【Features】 ■ A design that pursues a shape that is easy to grip without slipping and allows for easy application of force ■ Double injection molded rubber grip ■ Comes with a claw that is convenient for packaging and unpacking tasks and opening paint can lids *For more details, please refer to the related links or feel free to contact us.

• cutter
• Cutter/Scissors
• Other work tools