サンクメタル List of Products and Services

■Device Overview This machine has been developed for the production of electrode plates for batteries and capacitors. It is a machine that accurately applies a slurry-like compound, referred to as active material, onto aluminum foil, copper foil, and resin film. Metal material thickness: from 10μm to a maximum of approximately 300μm Viscosity of the coating liquid: compatible with 1,000mPa·s to 20,000mPa·s.

■Device Overview This machine is a device that allows for the easy application of coating solutions, such as battery materials, onto metal foils using direct coating. The coating thickness varies depending on the conditions, but it is widely used for the application of materials for testing lithium-ion battery cathodes and anodes. ■Device Dimensions With dimensions of W1090 x D993 x H1800 (for a drying oven length of 300 mm), it is very compact, making it a space-saving option that does not require a specific installation location.

■Features - Under the same conditions, anyone can achieve uniform coating. - The coating platform uses a glass plate, making it easy to clean. - The film thickness can be selected based on the applicator used.

Device Overview This device is a machine that precisely rolls thin foils such as aluminum foil and copper foil to increase the filling amount of the coated active material. ★Please contact us if you wish to request a test.

■Device Overview This device is a machine that precisely rolls thin foils such as aluminum foil and copper foil to increase the filling amount of the coated active material.

■Device Overview This device is a machine that accurately rolls thin foils such as aluminum foil and copper foil to increase the filling amount of the coated active material. ★ A demo unit is permanently installed at our factory, so please contact us if you would like to request a test.

■Device Overview This machine is designed to accurately slit thin foils such as aluminum foil and copper foil that have been coated with active materials, as well as other metal foils.

The "Roll Press" is used by the coater to compress the applied composite material on the substrate to increase its density. This product has a standardized pressing force ranging from 1 ton to 50 tons. Depending on the pressing force, there are three types of pressing methods: mechanical, air-hydraulic, and hydraulic. Additionally, we offer a compact air-hydraulic heating roll press "R-THCH1516," designed for use even when a 200V power supply is not available at the installation site. 【Features】 ■ Used to compress the applied composite material on the substrate to increase its density ■ Standardized pressing force ranging from 1 ton to 50 tons ■ Three types of pressing methods: mechanical, air-hydraulic, and hydraulic *For more details, please refer to the PDF materials or feel free to contact us.

This product is a small vacuum stirrer developed for LIB (Lithium-ion Battery). Available in 1-liter, 3-liter, and 6-liter types. The planetary blade has one unit with a revolution speed of up to 100 rpm and a rotation speed of up to 240 rpm, while the high-speed blade has one unit with a revolution speed of 10 to 100 rpm and a rotation speed of 300 to 3000 rpm. 【Specifications (partial)】 ■ 1-liter type ■ 3-liter type ■ 6-liter type ■ Options: jacket tank, hot water circulation (cold water circulation) *For more details, please refer to the PDF document or feel free to contact us.

The "Coter" is a device that accurately applies a coating material to copper foil, aluminum foil, and films at a consistent thickness. The "Small Precision Coating Machine 2-Roll Coter" is a standard type of direct coater, featuring an exchangeable coating head. The roll width ranges from 200mm to 500mm (in 50mm increments), and the drying oven is 800mm x 1 unit (hot air type). There are many options available, and depending on your requirements, you can select the necessary options to provide the appropriate coating device. 【Specifications (partial)】 ■ Coating method: Direct coat ■ Coating head: Exchangeable structure ■ Roll width: 200mm to 500mm (in 50mm increments) ■ Drying oven: 800mm x 1 unit (hot air type) ■ Power supply voltage: AC200V/50A *For more details, please refer to the PDF document or feel free to contact us.

The "Coter" is a device that accurately applies a coating of a certain thickness to copper foil, aluminum foil, and films. The "Small Precision Coating Machine 3-Roll Coter" allows you to choose between direct coating and transfer coating (intermittent application) methods. The coating head has an exchangeable structure, and the drying oven is 1000mm x 2 ovens (hot air method). There are plenty of options available, and depending on your requirements, you can select the necessary options to provide a suitable coating device. 【Specifications (partial)】 ■ Coating method: Direct coat / Transfer coat (intermittent application) ■ Coating head: Exchangeable structure ■ Roll width: 250mm to 500mm (in 50mm increments) ■ Drying oven: 1000mm x 2 ovens (hot air method) ■ Power supply voltage: AC200V/60A *For more details, please refer to the PDF document or feel free to contact us.

The "Coter" is a device that accurately applies a coating of a certain thickness to copper foil, aluminum foil, and films. The 'TH-C type Coter' is a precision type three-roll coater, with coating methods including direct coat and transfer coat (intermittent application). There are plenty of options available, and depending on your requirements, you can select the necessary options to provide the suitable coating device. 【Specifications (partial)】 ■ Coating method: Direct coat, transfer coat (intermittent application) ■ Coating head: Replaceable structure ■ Roll width: 350mm to 600mm (in 50mm increments) ■ Drying oven: 1000mm X 1 to 4 ovens (hot air method) ■ Power supply voltage: AC200V/100A *For more details, please refer to the PDF document or feel free to contact us.

The "Roll Press" is used by the coater to compress the applied composite material on the substrate to increase its density. The "Mechanical 1-Ton Roll Press" is cost-effective and operates mechanically, equipped with a digital clearance display device. With a roll diameter of Φ160 and a roll width of 150mm, it has a maximum heating capability of 150°C (optional). 【Specifications (partial)】 ■ Pressing capacity: 1 ton ■ Roll diameter: Φ160 ■ Roll width: 250mm ■ Power supply voltage: AC200V three-phase/10A *For more details, please refer to the PDF document or feel free to contact us.

The "Roll Press" is used by the coater to compress the applied composite material on the substrate to increase its density. The "Air-Hydro Type 10t Roll Press" is compact and high-pressure due to its air-hydro design. Its dimensions are W950 x D1250 x H1840 mm, and it weighs approximately 2000 kg. It has a pressing capacity of 2 to 10 tons, and the heating capability is up to 180°C (optional). 【Specifications (partial)】 ■ Pressing capacity: 2 to 10 tons ■ Roll diameter: Φ250 ■ Roll width: 250 mm (MAX 350 mm) ■ Heating capability: MAX 180°C (optional) ■ Power supply voltage: AC200V/40A * For more details, please refer to the PDF document or feel free to contact us. * A demo unit is available.

The "Roll Press" is used by the coater to compress the applied composite material on the substrate to increase its density. The "Air-Hydraulic 20t Roll Press" has a pressing capacity of 5 to 20 tons, with a roll diameter of Φ350 and a roll width of 350mm (MAX 500mm). We offer a variety of options, including the "Roll Heating System," "Roll Widening (in 50mm increments)," "Area Sensor (Entrance)," and "Load Distribution Plate," so please choose according to your application. 【Specifications (partial)】 ■ Pressing capacity: 5 to 20 tons ■ Roll diameter: Φ350 ■ Roll width: 350mm (MAX 500mm) ■ Heating capacity: MAX 180℃ (optional) ■ Power supply voltage: AC200V/50A *For more details, please refer to the PDF document or feel free to contact us.

The "Roll Press" is used by the coater to compress the applied composite material on the substrate to increase its density. The "Hydraulic 30t Roll Press" can handle up to 30 tons and a maximum roll width of 600mm. The roll diameter is Φ400, and the heating capacity is up to 180℃ (optional). We offer a variety of options, including the "Roll Heating System," "Roll Widening (in 50mm increments)," "Area Sensor (Entrance)," and "Load Distribution Plate," so please choose according to your application. 【Specifications (partial)】 ■ Pressing capacity: 6–30 tons ■ Roll diameter: Φ400 ■ Roll width: 350mm (MAX 600mm) ■ Heating capacity: MAX 180℃ (optional) ■ Power supply voltage: AC200V/50A *For more details, please refer to the PDF document or feel free to contact us.

The "Roll Press" is used by the coater to compress the applied composite material on the substrate to increase its density. The "Hydraulic 50t Roll Press" can handle up to 50 tons and a maximum roll width of 600mm. It comes with a digital clearance display device and a roll load indicator, with dimensions of W1800 x D2490 x H1920mm and a weight of approximately 6000kg. 【Specifications (partial)】 ■ Pressing capacity: 10 to 50 tons ■ Roll diameter: Φ360 ■ Roll width: 350mm (MAX 600mm) ■ Heating capacity: MAX 180℃ (optional) ■ Power supply voltage: AC200V/125A *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Slitter & Cutter." This machine can perform both slitting and cutting, with the slitting blade being a shear blade and the cutting blade a guillotine blade. It is driven by a variable-speed motor, and the material width ranges from 350 to 600mm. 【Specifications (partial)】 ■ Material width: 350–600mm ■ Slitting blade: Shear blade ■ Cutting blade: Guillotine blade ■ Slitting width: From 20mm ■ Drive: Motor-driven (variable speed) *For more details, please refer to the PDF document or feel free to contact us.

The "CH-40100-3R" is a compact precision coater that uses an integrated unit of heat source and blower in a drying oven. It accurately coats low to medium viscosity materials on various metal foils and films, then dries the coated materials and laminates a film on top. 【Equipment Configuration】 ■ Unwinding Device: Tension control mechanism ■ Coating Head: Direct coat, transfer coat (intermittent, back coating possible) / Gravure coat (optional) ■ Drying Device: Integrated unit of heat source and blower in the drying oven Effective oven length: 1000mm × 3 ovens (optional) Drying capacity: 40℃ to 180℃ ■ Winding Device: Air chuck type, maximum load capacity 50kg ■ Laminating Mechanism: Film laminator *For more details, please download the PDF or feel free to contact us.