小松鋼機 List of Products and Services

The "SV-Elephant Series" is a sludge and floating oil recovery device that resolves issues caused by sludge and floating oil. By introducing this product, you can suppress corrosion and rust that occur on the workpiece. It reduces clogging through cyclone recovery with high-speed dewatering. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Processing accuracy is unstable due to sludge ■ Fine sludge infiltrates, shortening tool life ■ Frequent machine downtime is problematic ■ Processing heat rises during machining ■ Concerns about processing quality and cleaning quality *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a sludge and floating oil recovery device that resolves issues caused by sludge and floating oil. By introducing this product, it is possible to suppress processing heat. It uses a powerful diaphragm pump with a capacity of 50 liters per minute to suction casting sludge from the back of the tank. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Worries about processing quality and cleaning quality ■ Concerns about filter load ■ Want to address the foul odor of cutting fluid ■ Machines and workpieces are sticky ■ Cleaning machine tools takes time and costs *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a vacuum-type coolant cleaner and sludge recovery device that addresses issues caused by sludge and floating oil. By implementing this product, you can recover foundry sludge and resolve the frequent machine stoppages that are causing you trouble. There are benefits such as quality improvement, environmental enhancement, and cost reduction. Please feel free to contact us when you need assistance. 【Some of the concerns (partial list)】 ■ Increase in processing heat during machining ■ Concerns about machining quality and cleaning quality ■ Concerns about filter load ■ Want to eliminate the foul odor of cutting fluid ■ Machines and workpieces are sticky *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a vacuum-type coolant cleaner that resolves issues caused by sludge and floating oil. By introducing this product, you can reduce ultra-fine sludge and improve tool life. There are benefits such as quality improvement, environmental enhancement, and cost reduction. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Frequent machine stoppages causing trouble ■ Increased machining heat during processing ■ Concerns about machining quality and cleaning quality ■ Worries about filter load ■ Wanting to address the foul odor of cutting fluid *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a vacuum-type coolant cleaner that resolves issues caused by sludge and floating oil. By introducing this product, the recovery of ultra-fine sludge improves machining accuracy. There are benefits such as quality improvement, environmental enhancement, and cost reduction. Please feel free to contact us when you need assistance. 【Some of the concerns (partial list)】 ■ Fine sludge is getting into tools, shortening their lifespan ■ Frequent machine downtime is causing problems ■ Machining heat is rising during processing ■ Concerns about machining quality and cleaning quality ■ Concerns about the load on filters *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a sludge and floating oil recovery device that resolves issues caused by sludge and floating oil. By introducing this product, you can suppress corrosion and rust that occur on the workpiece. It reduces clogging through cyclone recovery with high-speed dehydration. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Processing accuracy is unstable due to sludge ■ Fine sludge contaminates tools, shortening their lifespan ■ Frequent machine stoppages are causing problems ■ Processing heat rises during machining ■ Concerns about processing quality and cleaning quality *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a sludge and floating oil recovery device that resolves issues caused by sludge and floating oil. By implementing this product, you can reduce industrial waste costs and contribute to the SDGs. It uses a powerful diaphragm pump with a capacity of 50L/min to suction the cast iron sludge from the back of the tank. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Corrosion and rust on workpieces that need to be addressed ■ Processing accuracy is unstable due to sludge ■ Fine sludge getting into tools, shortening their lifespan ■ Frequent machine downtime causing issues ■ Increase in processing heat during machining *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a sludge and floating oil recovery device that resolves issues caused by sludge and floating oil. By implementing this product, you can reduce equipment clogging and failure rates. It uses a powerful diaphragm pump with a capacity of 50L/min to suction the cast iron sludge from the back of the tank. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Worrying about industrial waste volume and disposal costs ■ Wanting to address corrosion and rust on workpieces ■ Processing accuracy is unstable due to sludge ■ Fine sludge getting into tools, shortening their lifespan ■ Frequent machine stoppages causing problems *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a vacuum-type coolant cleaner that resolves issues caused by sludge and floating oil. By introducing this product, you can reduce the time and costs associated with cleaning machine tools. There are benefits such as improved quality, environmental enhancement, and cost reduction. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Clogging or malfunction of machinery ■ Worries about industrial waste volume and disposal costs ■ Wanting to address corrosion and rust on workpieces ■ Processing accuracy is unstable due to sludge ■ Fine sludge infiltrates, shortening tool life *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a vacuum-type coolant cleaner and sludge recovery device that resolves issues caused by sludge and floating oil. By introducing this product, you can reduce the stickiness of machines and workpieces. It offers benefits such as improved quality, environmental enhancement, and cost reduction. Please feel free to contact us when you need assistance. 【Some concerns (partial list)】 ■ Cleaning machine tools takes time and costs money ■ Clogging or malfunction of machinery ■ Concerns about industrial waste volume and disposal costs ■ Want to address corrosion and rust on workpieces ■ Processing accuracy is unstable due to sludge *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

The "SV-Elephant Series" is a vacuum-type coolant cleaner and sludge recovery device that resolves issues caused by sludge and floating oil. By introducing this product, we can alleviate concerns about the foul odor of cutting fluid by suppressing unpleasant smells. There are benefits such as quality improvement, environmental enhancement, and cost reduction. Please feel free to contact us when you need assistance. 【Some of the concerns (partial list)】 ■ Machines and workpieces are sticky ■ Cleaning of machine tools takes time and costs money ■ Clogging or malfunction of machinery ■ Concerns about industrial waste volume and disposal costs ■ Want to address corrosion and rust on workpieces *For more details, please download the PDF or feel free to contact us.

• Other environmental equipment

SV-Elephant MAG: Dewatering and recovery of casting sludge using vacuum collection and magnetic separation with a powerful magnet separator. Floating sludge and floating oil are also collected with a suction float. SV-Elephant 101: Vacuum collection only. This type does not have a magnetic separator. General sludge, non-magnetic sludge, and floating sludge and floating oil are also collected with a suction float. SV-Elephant R: Comes with one SUS mesh cage of the 101 model. SV-Elephant MM: Collects floating oil through vacuum recovery and a two-chamber separation tank. A dual-purpose machine for sludge and floating oil recovery. SV-Elephant E: Floating oil recovery using a three-stage separation tank. Suitable for cleaning machines and painting booths. Liquid temperature 90°C, oil recovery rate 95%. SV-Elephant M: Floating oil recovery using a two-stage separation tank. Suitable for machine tools. Liquid temperature 70°C, oil recovery rate 95%.

• Oil-water separator

Komatsu Steel's recommended product, "Raku-Rant," is an automatic dilution and supply device for cutting fluids that creates cutting fluid by diluting water-soluble cutting oil to a specified concentration (0-10%) with water. The cutting fluid stored in the internal tank of the device is supplied to the machine tools through piping. It maintains a constant amount of cutting fluid in the coolant tank on the machine tool side. It is capable of automatically supplying multiple machine tools. It can dilute the concentrate and water to the specified concentration. (For small machines, there are connection records of about 40 units.) 【Features】 ■ Automatic supply to multiple machine tools ■ Dilution of concentrate and water to the specified concentration ■ Full compliance with the Water Supply Act through water quality certification ■ Calendar timer function allows for setting supply and stop times by day of the week ■ Leakage sensor function automatically stops the device in case of liquid leakage 【Benefits of Implementation】 ■ Eliminates non-operating hours of equipment and eradicates unnecessary tasks that anyone can do, creating a foundation for employees to "think and act" ■ Achieves unmanned continuous operation during nights and holidays ■ Cost reduction of about 20% annually just from the raw material costs of cutting oil ■ Zero tool breakage due to uniform management of cutting oil concentration *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

We would like to introduce the equipment we have at our company. We possess a "3D laser processing machine" that can handle all types of steel pipes and is capable of both single-item and mass production with excellent processing speed, as well as a "3D plasma processing machine" produced by our system engineering division and a "drill band saw" manufactured by Daito Seiki. Additionally, we also have a "diagonal saw cutting machine" that can accommodate a variety of small lots. Please feel free to consult us when you need assistance. 【Equipment Owned (Partial)】 ■ 3D laser processing machine ■ 3D plasma processing machine ■ Drill band saw ■ Diagonal saw cutting machine *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic processing machines (cutting and rolling)

We would like to introduce our Steel Materials Division's "Manufacturing Support." We handle approximately 4,000 tons of inventory and provide in-house services for standard lengths, cutting, and a wide variety of shape processing. If there are areas where we can assist between processes, we can also accommodate cutting requests, and we carry out all processing. We supply to customers in various industries, including construction machinery, buses, trucks, textile machinery, machine tools, and food machinery. We coordinate with partner companies while considering the customer's specifications and situation (operation). 【Manufacturing Process (Part)】 ■ In-house Processing - Creation of part drawings - Material procurement - Part processing *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Is the machine not stopping due to insufficient cutting fluid? Are you coming in on Saturdays and Sundays to refill the cutting fluid for machine operation? Leave it to "Raku-Rant"! 1. Prepare coolant by diluting water-soluble cutting oil to the specified concentration (0-10%) with water. 2. Supply the coolant stored in the internal tank of the device to the machine tools via piping. 3. An automatic dilution supply device that maintains the coolant level in the coolant tank on the machine tool side. Automatic supply to multiple machine tools is possible. Dilute the concentrate and water to the specified concentration. [Features] ■ Automatic supply to multiple machine tools ■ Dilution of concentrate and water to the specified concentration ■ Complete compliance with the Water Supply Act through water quality certification ■ Calendar timer function allows for setting supply and stop by day of the week ■ Leakage sensor function automatically stops the system in case of any liquid leakage on the main unit side *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Leave it to Rant! Do you have any of these issues? 1) Spending too much time on "refilling" Measuring ⇒ Diluting ⇒ Measuring ⇒ Transporting ⇒ Supplying 2) Not being "properly" diluted Incorrect dilution order, separate addition of water and oil results in residue and incompatibility with the cutting fluid in use! 3) There is "variation" in concentration Concentration varies by person in charge, leading to increased oil costs and affecting the quality of machine tools and processed products. 4) Transporting "heavy" pails Burden on the body 5) "Spills" during transport causing "mess" Additional tasks like cleaning arise, leading to a dirty work environment.

• Other cutting tools

Aren't there any issues like this? Leave it to Raku-Rant! 1) Spending too much time on "replenishment" Measuring ⇒ Diluting ⇒ Measuring ⇒ Transporting ⇒ Supplying 2) Not being diluted "appropriately" Incorrect dilution order, adding water and oil separately, etc. 3) There is "variation" in concentration Concentration varies by person in charge, leading to increased oil costs and affecting the quality of machine tools and processed products. 4) Transporting "heavy" pails Burden on the body 5) "Spills" during transport causing "mess" Additional tasks like cleaning arise, leading to a dirty work environment.

• Other cutting tools

<Features and Functions> 1) Capable of automatic supply to multiple machine tools, expecting significant effects. 2) The coolant tank on the machine side is always full. 3) Notification when the original liquid in the drum runs out. 4) Constant water pressure for stable dilution and mixing concentration. 5) Can be supplied directly from the oil supply gun. 6) With a leakage sensor function, it automatically stops in case of any liquid leakage from the main unit, and alerts with a patrol light and buzzer. 7) Connection to water supply piping is possible due to compliance with "Water Supply Law Performance Standards." 8) Can be activated and stopped at set times using a calendar timer.

• Other cutting tools

1) "Supplementation" takes a lot of time Weighing ⇒ Dilution ⇒ Measurement ⇒ Transport ⇒ Supply 2) Not diluted "appropriately" Incorrect dilution order, adding water and oil separately, etc. 3) There is "variation" in concentration Concentration varies depending on the person responsible for preparation, leading to increased oil costs and affecting the quality of machine tools and processed products. 4) Transporting "heavy" pails Burden on the body 5) "Spills" during transport causing "dirt" Additional cleaning tasks such as wiping arise, leading to a dirty work environment Leave it to "Raku-Rant"! "Raku-Rant" will solve it!

• Other cutting tools

We would like to share feedback from companies that have introduced "Raku-Ranto," handled by Komatsu Seiki Co., Ltd. - Comment from Company L in Ishikawa Prefecture: "We used to replenish cutting fluid every other day, but now it is automatically supplied, allowing employees to focus on processing tasks." - Comment from ISS Yamazaki Machinery's Mizuguchi Factory in Shiga Prefecture: "It has become much easier as there is no need to manage cutting fluid, reducing the burden on operators and minimizing non-operating time for machine tools. It has also contributed to reducing costs for cutting tools and the amount of cutting fluid purchased." 【Reduction Effects from the Introduction of Raku-Ranto at ISS Yamazaki Machinery's Mizuguchi Factory】 ■ Decrease in tool breakage - Approximately 100 tools, resulting in an annual reduction of about 5 million yen in product damage costs. ■ Annual reduction of about 1 million yen in the purchase of cutting fluid concentrate. *For more details, please refer to the related links or feel free to contact us.

• Other cutting tools

We would like to introduce the mechanism and features of "Raku-Ranto," handled by Komatsu Steel Co., Ltd. This product operates at a voltage of 100V, eliminating the need for voltage construction. Additionally, it can be easily installed by simply connecting to the water supply, and we have a track record of simultaneous connections of up to about 40 units with small machines. - Concentration adjustment (adjusted with a knob inside the Raku-Ranto main unit) Dilution at the set concentration - Through piping to each machine tool - Automatic supply through the ball valve float installed in the tank on each machine tool side 【Features】 ■ Operates at 100V ■ Easy installation ■ Multiple connections possible ■ Can be connected to water supply piping due to compliance with "Water Supply Law Performance Standards" ■ Awarded the Good Ishikawa Brand in 2018 ■ Won the Humor Naming Award at the 30th Reader's Choice "Naming Award" *For more details, please refer to the related links or feel free to contact us.

• Other cutting tools

We would like to introduce the features of "Raku-Ranto," handled by Komatsu Steel Co., Ltd. Water and concentrated solution are mixed at a specified concentration, and the processes of dilution, stirring, and replenishment are fully automated. The automatically produced cutting fluid is supplied to machine tools through piping. Additionally, without the need for electricity, the cutting fluid water level in the machine's coolant tank is managed to be always full, and for small equipment without piping, cutting fluid can be extracted using an oil gun. [Features] - Automatic dilution creation of cutting fluid - Complies with water supply law performance standards - Automatic supply to a maximum of 40 machine tools (for small machines) - The water level in the machine's coolant tank is always full - Notification when the concentrated solution in the drum is depleted - Dilution at a stable concentration with constant water pressure - Equipped with a main unit leakage sensor that automatically stops in case of liquid leakage - Calendar timer included - Cutting fluid can be extracted with an oil gun for equipment without piping *For more details, please refer to the related links or feel free to contact us.

• Other cutting tools

Excerpt from the Q&A about 'Raku-Ranto' handled by Komatsu Steel Co., Ltd. - Q1: Is there only one type of Raku-Ranto? A1: Currently, there are two types available. The difference is whether or not there is an LCD panel display. (The functions are the same) ICS-3100: No LCD panel display ICS-3200: Has an LCD panel display (can be adjusted while monitoring concentration, etc.) - Q2: Is there anything else needed besides purchasing the Raku-Ranto main unit? A2: You will need a ball tap for adjusting the tank on the machine side for each unit of the machine. - Q3: Is there a warranty? A3: There is a one-year manufacturer warranty after purchase. (We will respond based on the warranty certificate regulations) - Q4: Can various types of oils be used? A4: It only supports water-soluble oils. Oil-based oils cannot be used. - Q5: How many machines can be connected to one Raku-Ranto unit? A5: It depends on the area of use, but there are examples of connecting up to 40 small machines. - Q6: Can the concentration settings be done for each machine? A6: One Raku-Ranto unit can only have one concentration setting. (Adjustment of concentration is possible) *For more details, please feel free to contact us.

• Other cutting tools

We will introduce the process leading up to the introduction of 'Raku-Rant' handled by Komatsu Seisakusho Co., Ltd. 【Flow from consideration to introduction】 1) Understanding the current situation regarding the dilution and supply of cutting fluid (time and cost estimation) 2) Consideration of the number of target machine tools, oil types, and request for estimates 3) Sampling tests of the target oil 4) Selection of the Raku-Rant model 5) Order arrangement 6) Consideration of factory piping 7) Installation of factory piping facilities (ball tap installation) 8) Delivery of Raku-Rant 9) Installation inspection, operation confirmation, and maintenance explanation *For more details, please feel free to contact us.

• Other cutting tools

We would like to introduce feedback from customers who have implemented "Raku-Ranto," handled by Komatsu Steel Co., Ltd. - Comment from Company O in Shizuoka Prefecture: "The fact that the replenishment of cutting fluid has been reduced to zero has had a more significant effect than expected, creating new time for operators." - Comment from a diesel engine pump parts manufacturing company in Osaka Prefecture: "Currently, everything is running smoothly without any troubles. The replenishment of cutting fluid, which was a significant burden for workers, has now been reduced to just checking the concentration, which we believe will lead to a decrease in turnover rates in the future." [Implementation Effect Topics] - Eliminating non-operating hours of equipment and eradicating unnecessary tasks that anyone can perform - Achieving unmanned continuous operation during nights and holidays - A cost reduction of approximately 20% annually just from the raw material costs of cutting oil *For more details, please refer to the related links or feel free to contact us.

• Other cutting tools

Introducing the reasons why 'Raku-Ranto,' handled by Komatsu Steel Co., Ltd., is chosen. This product was born from improvement activities in the parts processing industry and developed by processing professionals. It is actually compliant with the little-known Water Supply Act, allowing for direct connection to water supply. [Concerns regarding the use of cutting fluids] ■ It takes a lot of time to dilute the cutting fluid. ■ The cutting fluid is not properly diluted. ■ The concentration varies depending on the person in charge, making it difficult to manage the processing conditions. ■ Cutting fluid is spilled on the floor, causing mess. It has been certified by Ishikawa Prefecture as a Good Ishikawa Brand. [Value created by Raku-Ranto] ■ Contributes to the constant operation of equipment. ■ Solves labor shortages. ■ Reduces consumption of cutting oil concentrate. ■ Stabilizes tool life. ■ Reduces product defects. *For more details, please refer to the related links or feel free to contact us.

• Other cutting tools

"Raku-Rant" is an automatic coolant dilution supply device that: 1. Prepares coolant by diluting water-soluble cutting oil agents with water at a specified concentration (0-10%). 2. Supplies the coolant stored in the internal tank of the device to the machine tools via piping. 3. Maintains the coolant level in the coolant tank of the machine tools. It can automatically supply multiple machine tools and can dilute the concentrate with water at the specified concentration. 【Features】 ■ Capable of automatic supply to multiple machine tools ■ Dilutes concentrate and water at the specified concentration ■ Fully compliant with the Water Supply Act through water quality certification ■ Calendar timer function allows for setting supply and stop times by day of the week ■ Leakage sensor function automatically stops the system in case of liquid leakage *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Raku-Rant" is an automatic dilution and supply device for cutting fluids that prepares cutting fluid by diluting water-soluble cutting oil at a specified concentration (0-10%) with water. The cutting fluid stored in the internal tank of the device is supplied to the machine tool through piping. It maintains a constant amount of cutting fluid in the coolant tank on the machine tool side. It is capable of automatically supplying multiple machine tools. It can dilute the concentrate and water at the specified concentration. (For small machines, there are records of connections with approximately 40 units.) 【Features】 ■ Capable of automatic supply to multiple machine tools ■ Dilutes concentrate and water at the specified concentration ■ Fully compliant with the Water Supply Act through water quality certification ■ Calendar timer function allows for setting supply and stop by day of the week ■ Leakage sensor function automatically stops in case of any liquid leakage *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

We conducted an interview with ISS Yamazaki Machinery Co., Ltd. (formerly known as Yamazaki Machinery Manufacturing Co., Ltd.), which has introduced the automatic dilution supply device for cutting fluid "Raku-Ranto" handled by Komatsu Steel Co., Ltd. At the company, the equipment frequently stopped for replenishing cutting fluid for machining. The combined task of diluting and replenishing cutting fluid took about 30 minutes each time, resulting in a waste of 450 minutes, or 7.5 hours, per day. Although it is a job that anyone can do, someone had to do it. After the introduction, the purchase cost of cutting oil decreased by about 20%, amounting to approximately 1 million yen per year. In addition, they have realized "unmanned continuous processing" by combining various automation devices, including a device for compressing chips, temperature management, and of course, devices for retrieving from lathes and storing in shelves using stacker cranes. "We cannot achieve automation without the automatic dilution supply device 'Raku-Ranto,'" was the feedback we received. *For more details, please refer to the PDF document or feel free to contact us.*

• Other cutting tools

We conducted an interview with Yamazaki Manufacturing Co., Ltd., who has introduced our automatic cutting fluid supply system "Raku-Rant." The company frequently experienced downtime due to the need to refill cutting fluid for their machining equipment. The process of diluting and refilling the cutting fluid took about 30 minutes each time, resulting in a waste of 450 minutes, or 7.5 hours, per day. After the introduction of the system, the cost of purchasing cutting oil has decreased by about 20%. In addition, they have combined various automation devices, such as a chip compactor, temperature management systems, and of course, robots for retrieving from lathes and stacker cranes for storing in shelves, to achieve "unmanned continuous processing." "We cannot achieve automation without the 'Raku-Rant' automatic cutting fluid supply system," was their feedback. *For more details, please refer to the PDF document or feel free to contact us.*

• Other cutting tools

"Raku-Rant" is an automatic supply device for cutting fluid that creates cutting fluid by diluting water-soluble cutting oil to a specified concentration (0-10%) with water. It supplies the cutting fluid stored in the internal tank of the device to the machine tools via piping. It maintains and manages the amount of cutting fluid in the coolant tank on the machine tool side. It can automatically supply multiple machine tools. It can dilute the concentrate and water to the specified concentration. 【Features】 ■ Capable of automatic supply to multiple machine tools ■ Dilutes concentrate and water to the specified concentration ■ Fully compliant with tap water due to water quality certification ■ Supplies and stops at set times with a calendar timer function ■ Automatically stops in case of liquid leakage with a leakage sensor function *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

"Raku-Rant" is a coolant server that fully automates the production, transportation, and supply of cutting fluids. This product dilutes water-soluble cutting oil to a specified concentration to create cutting fluid, supplies the cutting fluid stored in the internal tank of the device to the machine tools via piping, and automatically maintains and manages the water level in the coolant tank on the machine tool side. [Features] - Capable of automatic supply to multiple machine tools - Dilutes concentrate and water to a specified concentration - Fully compliant with tap water standards through water quality certification - Supplies and stops at set times using a calendar timer function - Can supply directly from the oil supply gun - Automatic shutdown in case of liquid leakage with a leakage sensor function *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Raku-Rant ICS-3100" is an automatic supply device for cutting fluid that realizes the automation of "generation" and "supply" of cutting fluid. This product was born from improvement activities in the parts processing industry and was developed by professionals in machining. In fact, it complies with the little-known Water Supply Act, allowing it to be directly connected to the water supply. It contributes to "productivity improvement," which is crucial for our customers' survival. 【Features】 ■ Increases productivity by transforming the replenishment work of cutting fluid ■ Improves machine operating rates ■ Reduces the amount of concentrate used ■ Enhances workplace safety *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools

At Komatsu Steel Co., Ltd.'s Steel Materials Division, we mainly handle sheet products, round bars, shaped steel, and steel pipes. We provide a one-stop service from material procurement to processing and delivery, ensuring stable supply of component quality and offering at stable prices, which contributes to reducing total costs and shortening delivery times for our customers. Additionally, with the introduction of the FG-CAD CAM system and 3D CAD, we can perform high-precision 3D notch processing. Our staff can assist you with proposals from materials to processing based on CAD drawings. 【Handled Steel Materials】 ■ Steel plates ■ Special steel plates ■ Flat, square, and round steel ■ Drawn (polished) ■ Special steel, etc. *For more details, please download the PDF or feel free to contact us.

• Processing Contract