日本ポリマー Product Lineup

In restaurants, it is important to provide customers with a comfortable space. Especially in winter, measures against the cold in seating areas are required. The escape of heating due to the opening and closing of doors and the intrusion of cold air not only diminishes customer comfort but also leads to increased utility costs. Our magnetic vinyl curtain "MAGLEN" automatically closes with a special magnet, effectively preventing the intrusion of outside air and maintaining the temperature in the seating area. 【Usage Scenarios】 - Installation at entrances or terrace seating - Partition between seating areas and kitchens - Dividers for private rooms or semi-private rooms 【Benefits of Implementation】 - Maintains a constant temperature in seating areas, improving customer satisfaction - Increases heating efficiency and reduces utility costs - Reduces employee burden (eliminates the hassle of opening and closing)

In the supermarket industry, it is important to maintain the freshness of products and reduce food waste. In particular, temperature management in refrigerators is key to preserving freshness. Temperature changes caused by opening and closing doors can accelerate the deterioration of product quality, which may ultimately increase the amount of waste. MAGLEN automatically closes with a special magnet, minimizing the escape of cold air and keeping the internal temperature constant. 【Usage Scenarios】 - Refrigerator entrances - Backroom sorting spaces - Product delivery entrances 【Benefits of Implementation】 - Reduction of food waste through freshness preservation - Cost savings through energy efficiency - Improved work efficiency

In the car dealership industry, it is important to maintain the aesthetic appeal of display vehicles and create a positive impression on customers. In particular, outdoor display vehicles are susceptible to the effects of dust, rain, and wind, which can diminish the value of the cars. Additionally, frequent opening and closing of doors can worsen air conditioning efficiency and increase energy costs. MAGLEN achieves smooth opening and closing through special magnets, protecting display vehicles from dust and outside air. It also contributes to maintaining air conditioning efficiency and leads to energy savings. 【Usage Scenarios】 - Entrance to the display area - Entrance to the service workshop - Painting booth 【Benefits of Implementation】 - Maintains the aesthetic appeal of display vehicles - Improves air conditioning efficiency - Energy-saving effects

At event venues, it is necessary to create divisions in exhibition spaces and secure temporary areas. In particular, ensuring visitor flow and space configuration that matches the event content is important. Traditional partitions can be cumbersome to set up and may not allow for flexible responses. MAGLEN can be easily installed in the required locations and allows for smooth opening and closing, contributing to the efficient use of space at event venues. 【Usage Scenarios】 - Dividing exhibition spaces - Securing temporary break areas - Dividing reception and backroom areas 【Benefits of Implementation】 - Effective use of space - Flexible layout changes - Improved comfort for visitors

In recycling facilities, work efficiency and employee health management are important. In particular, the cold of winter can lead to decreased performance and increased health risks for workers. Temperature changes caused by opening and closing doors can worsen heating efficiency and lead to increased utility costs. Maglen closes tightly with special magnets, preventing the intrusion of outside air and maintaining indoor temperature. 【Usage Scenarios】 - Entrance areas - Dividers in work areas - Places requiring temperature control 【Benefits of Implementation】 - Improved comfort for workers - Cost reduction due to increased heating efficiency - Contribution to energy-saving measures

In food factories, foreign matter contamination is a serious issue that can compromise product quality and safety. Particularly in areas with high foot traffic or frequent door openings, the risk of foreign matter entering through gaps increases. MAGLEN reduces the risk of contamination by using special magnets to ensure that curtains adhere closely together, minimizing gaps. This contributes to maintaining product quality. 【Usage Scenarios】 - Entrances and corridors of food factories - Entrances to refrigerated and frozen storage - Partitions on manufacturing lines 【Benefits of Implementation】 - Reduced risk of foreign matter contamination - Improved product quality - Enhanced work efficiency

In hospitals, infection control is extremely important to ensure the safety of patients and healthcare workers. In particular, it is necessary to reduce the risk of airborne infections in patient rooms and isolation areas, and to maintain a clean environment. Efficient operation of air conditioning systems is also essential for balancing infection control and energy conservation. Our magnetic vinyl curtain "MAGLEN" addresses these challenges. 【Usage Scenarios】 - Entrances and exits of patient rooms - Dividers in isolation areas - Examination rooms - Testing rooms 【Benefits of Implementation】 - Reduction in electricity costs due to improved air conditioning efficiency - Suppression of outside air intrusion, maintaining a constant indoor temperature - Reduction of gaps in curtains, lowering infection risks - Usable even in environments as low as -20°C - Can be passed through even when both hands are occupied

For car dealers, maintaining the aesthetic appeal of display vehicles is extremely important. Outdoor displays can face issues such as deterioration from rain, wind, and UV rays, as well as dust accumulation, which can negatively impact customer impressions. Additionally, in indoor displays, inadequate air conditioning management can compromise customer comfort. 'MAGLEN' contributes to the protection of display vehicles and the creation of a comfortable space by shielding them from external environments and enhancing air conditioning efficiency. 【Usage Scenarios】 - Outdoor and indoor display spaces for vehicles - Entrance of service workshops 【Benefits of Implementation】 - Suppression of vehicle deterioration - Reduction in electricity costs due to improved air conditioning efficiency - Provision of a comfortable space for customers

In logistics centers, temperature management is crucial for maintaining the quality of packages. It is necessary to prevent the intrusion of cold air or heat from the outside and to keep the internal temperature constant. Additionally, in areas with frequent loading and unloading of packages, reducing the hassle of opening and closing doors and improving work efficiency is a challenge. MAGLEN closes gaps tightly with special magnets, enhancing air conditioning efficiency and contributing to reduced electricity costs. 【Usage Scenarios】 - Warehouse entrances - Loading docks - Refrigerated and frozen warehouses 【Benefits of Implementation】 - Improved temperature management - Preservation of package quality - Increased work efficiency - Reduced electricity costs

In restaurants, it is important to prevent the intrusion of insects in order to provide customers with a comfortable space. Especially in establishments that handle food, the presence of insects can cause hygiene issues and potentially undermine customer trust. Additionally, insects can reduce employee work efficiency. MAGLEN closes gaps with special magnets, thereby suppressing the entry points for insects and maintaining a clean environment. 【Usage Scenarios】 - Entrances and loading docks - Partitions between kitchens and dining areas - Entrances to terrace seating 【Benefits of Implementation】 - Suppresses insect intrusion and maintains a hygienic environment - Provides customers with a comfortable space - Improves employee work efficiency

In the machine tool industry, the durability of parts that can withstand long periods of operation is essential. Particularly in areas subject to high loads or prone to wear, the selection of parts significantly affects the overall performance and lifespan of the machinery. Appropriate material selection and precise processing are indispensable. Our products support all processing technologies and contribute to improving the durability of machine tools by providing comprehensive services from material procurement to assembly. 【Usage Scenarios】 - Machine tool parts requiring high precision - Parts prone to wear - Parts that can withstand long periods of operation 【Benefits of Implementation】 - Streamlining of parts procurement operations - Stable supply of high-quality parts - Increased reliability of the entire machine

In the semiconductor manufacturing equipment industry, high-precision components significantly influence the overall performance of the equipment. In particular, fine processing technology and advanced surface treatment are required, and the stability of quality is crucial. Selecting processing partners that can meet the specifications, procuring multi-process products, and thorough quality management are challenges that need to be addressed. Japan Polymer's metal and resin processed components solve these challenges. 【Usage Scenarios】 - Precision components for semiconductor manufacturing equipment - Components requiring high precision - When thorough quality management is desired 【Benefits of Implementation】 - Increased efficiency through the unification of procurement operations - Stable supply of high-quality components - Potential for cost reduction

In the agricultural machinery industry, there is a demand to reduce the effort involved in parts procurement and management, aiming for labor-saving solutions. Particularly in agricultural machinery that requires a wide variety of parts, challenges arise in selecting suppliers, managing multiple processes, and ensuring quality control. Japan Polymer's metal and resin processed parts address these challenges. 【Usage Scenarios】 - Parts procurement departments of agricultural machinery manufacturers - Repair and maintenance service providers for agricultural machinery - Agricultural workers considering labor-saving measures 【Benefits of Implementation】 - Improved operational efficiency through the consolidation of procurement channels - Stable supply of high-quality parts - Potential for cost reduction

In the medical device industry, precise machining of parts is required to ensure product reliability and safety. Particularly for components that demand intricate shapes and high precision, the level of machining technology significantly affects product quality. Parts with low machining accuracy can lead to equipment malfunctions or performance degradation. Our products support the precision of medical devices by accommodating all machining technologies and consolidating procurement channels. 【Application Scenarios】 - Precision medical devices - Surgical instruments - Inspection equipment 【Benefits of Implementation】 - Streamlined procurement operations through consolidation of machining sources - Stable supply of high-quality parts - Potential for cost reduction

In factories, there is a demand to enhance heating efficiency and reduce utility costs. Particularly in areas with high foot traffic or where spaces are divided, heating tends to escape easily, making temperature management challenging. Magren helps to close gaps tightly with special magnets, making it difficult for heat to escape and contributing to energy savings. 【Usage Scenarios】 - Areas with high foot traffic - Divided spaces - Areas requiring temperature management 【Benefits of Implementation】 - Improved heating efficiency - Reduced utility costs - Enhanced working environment

In the logistics industry, it is essential to ensure smooth loading and unloading of goods. Particularly in the movement between the warehouse and the outside, there are challenges such as time loss due to door opening and closing, as well as temperature management issues. Maglen supports smooth loading and unloading of goods by automatically closing with a special magnet. This contributes to improved work efficiency. 【Usage Scenarios】 - Warehouse entrances and exits - Truck loading docks - Refrigerated and frozen warehouses 【Benefits of Implementation】 - Reduction in work time - Improvement in temperature management - Energy-saving effects

In the food processing industry, the durability of conveyor belts in high-temperature environments is a significant challenge. In particular, degradation and damage due to heat increase the risk of reduced production efficiency and foreign matter contamination. Our fluororesin/aramid fabric excels in heat resistance and can be used over a wide temperature range of -100 to +180°C. This ensures a longer lifespan and stable operation of conveyor belts in food processing. 【Application Scenarios】 * Food transport at high temperatures * Heating and drying processes * Parts for food processing machinery 【Benefits of Implementation】 * Improved durability of conveyor belts * Increased production efficiency * Reduced risk of foreign matter contamination

In the pharmaceutical industry, high cleanliness in the manufacturing process is required. In particular, to ensure the quality of pharmaceuticals, it is important that components such as conveyor belts remain clean at all times without being contaminated by drugs or solvents. The use of inappropriate materials can lead to product contamination and quality degradation. Our fluororesin/aramid cloth is chemically stable and resistant to most drugs and solvents. This helps maintain high cleanliness and contributes to the improvement of pharmaceutical manufacturing quality. 【Usage Scenarios】 - Conveyor belts in pharmaceutical manufacturing lines - Components in clean rooms - Environments using drugs and solvents 【Effects of Implementation】 - Maintenance of high cleanliness - High resistance to drugs - Improvement of product quality - Stabilization of the manufacturing process

In the automotive industry, reducing weight of components is a crucial challenge for improving fuel efficiency and minimizing environmental impact. Particularly for parts used in high-temperature environments or electrical systems, there is a demand for lightweight materials that also possess high durability and insulation properties. Fluororesin/aramid fabric addresses these challenges by being lightweight while usable in a wide temperature range of -100 to +180°C, demonstrating excellent insulation characteristics. 【Application Scenarios】 - Reinforcement material for conveyor belt ears 【Benefits of Implementation】 - Improved fuel efficiency through weight reduction - Enhanced safety due to high insulation properties - Increased durability due to heat resistance

In the chemical plant industry, materials that can withstand corrosive chemicals and solvents are required. The ear reinforcement material of conveyor belts often comes into frequent contact with chemicals, and if it has low chemical resistance, it can lead to early deterioration and the risk of operational shutdown. Our fluororesin/aramid fabric is resistant to most chemical substances and solvents, making it chemically stable and ideal for use as ear reinforcement material for conveyor belts. 【Usage Scenarios】 - Plants handling chemical substances - Manufacturing lines using solvents - Conveyor belts in corrosive environments 【Benefits of Implementation】 - Extended lifespan of conveyor belts - Reduced risk of operational shutdown - Cost savings

In the textile industry, the flexibility of conveyor belts is a crucial factor that affects the efficiency of product transport. Particularly, as manufacturing lines become faster, there is a demand for both durability and flexibility of the belts. The edge reinforcement materials of the belts require high tear strength, abrasion resistance, and flexibility. Our fluororesin/aramid fabric has been developed to meet these challenges. 【Usage Scenarios】 * Edge reinforcement of conveyor belts * Industrial fabrics requiring flexibility * Applications needing chemical resistance 【Benefits of Implementation】 * Extended lifespan of belts * Stabilization of product transport * Improved production efficiency

In the electronics industry, as products become smaller and more high-performance, insulation materials are required to have high reliability and stability. In particular, for electronic components used in high-temperature environments and high-frequency ranges, the degradation of insulation performance can lead to product failures. Our fluororesin/aramid cloth exhibits excellent insulation characteristics across a wide frequency range and temperature range, contributing to the reliability of electronic devices. 【Application Scenarios】 * Electronic circuit boards * Cable insulation * Insulation for various electronic components 【Benefits of Implementation】 * Improved product reliability due to high insulation performance * Stable performance over a wide temperature range * High resistance to chemicals and solvents

In the mining industry, the durability of conveyor belts in harsh environments is crucial. Materials that can withstand wear, chemicals, and temperature changes are required. Damage to the belts can lead to decreased production efficiency and significant losses. Our fluororesin/aramid fabric excels in chemical resistance, heat resistance, and bending resistance, supporting the mining sites as a reinforcement material for conveyor belts. 【Usage Scenarios】 - Transportation of earth and sand in mines - Conveying minerals at processing plants - Material transportation within plants 【Benefits of Implementation】 - Extended lifespan of conveyor belts - Reduced maintenance costs - Increased productivity through stable operations

In the power generation industry, materials that can maintain performance even in high-temperature environments are required for stable equipment operation. In particular, the ear reinforcement material for conveyor belts must withstand heat and friction while functioning effectively over long periods. Proper material selection is essential for extending equipment lifespan and reducing maintenance costs. Our fluororesin/aramid fabric excels in heat resistance and contributes to the reliability of power generation equipment. 【Application Scene】 - Ear reinforcement material for conveyor belts 【Benefits of Implementation】 - Extended equipment lifespan - Reduced maintenance costs

In the chemical industry, there is a demand for adhesive tapes that have high resistance to chemicals and are strong against temperature changes. Particularly in high-temperature environments or areas where there is a possibility of contact with chemicals, the degradation or peeling of the tape can become a problem. Our adhesive tape/GTT can be used in a wide temperature range from -100 to +240 degrees and is also resistant to chemicals. This contributes to improved safety and work efficiency in environments handling chemical substances. 【Usage Scenarios】 - Chemical plants - Research facilities - Chemical storage rooms 【Benefits of Implementation】 - Suppression of degradation due to chemicals - Strong against temperature changes, maintaining stable adhesion - Improved work efficiency

In the home appliance industry, the miniaturization and high performance of products are advancing, and high reliability is required for the fixation of components. In particular, areas exposed to temperature changes and vibrations may experience a decrease in adhesive strength or peeling, which can lead to product failures. Our adhesive tape/GTT can be used in a wide temperature range from -100 to +240 degrees and has excellent thermal conductivity, making it ideal for securing components in home appliances. 【Usage Scenarios】 - Fixing components inside microwave ovens - Securing insulation materials inside refrigerators - Fixing components inside toaster ovens - Securing components inside air conditioners 【Benefits of Implementation】 - Improved product reliability due to high heat resistance - Maintenance of component performance due to thermal conductivity - Contribution to space-saving through a slim design - Achieving long-term fixation due to high strength

In the food processing industry, product protection under high-temperature conditions during the packaging process is required. Particularly in thermal sealing and lamination, heat resistance and adhesion are crucial. The improper use of tape can lead to packaging damage and quality deterioration. Our adhesive tape/GTT can be used in temperature ranges from -100 to +240 degrees, has excellent thermal conductivity, and good strength. This supports the packaging process in high-temperature environments. 【Application Scenarios】 - Heat pressing - Surface coating of heat sealer crimping areas 【Benefits of Implementation】 - Stabilization of packaging in high-temperature environments - Preservation of product quality - Improvement of work efficiency

In the electronics industry, as the miniaturization and high density of electronic devices progress, heat dissipation measures have become an important issue. Particularly in electronic components subjected to high temperatures or high loads, proper heat dissipation is essential for maintaining product performance and longevity. Insufficient heat dissipation can lead to component failure or performance degradation. Our GTT adhesive tape features excellent thermal conductivity and heat resistance, solving heat dissipation problems in electronic devices. 【Usage Scenarios】 * Heat management for electronic components * Fixing heat sinks * Securing thermal conductive sheets 【Benefits of Implementation】 * Improved reliability of electronic devices * Extended product lifespan * Suppression of performance degradation

In the medical device industry, the reliability of sterilization processes is essential. Particularly in sterilization processes conducted under high temperature and pressure, the heat resistance and adhesion of the materials used are crucial. Inappropriate materials can lead to reduced sterilization effectiveness and damage to the equipment. Our GTT adhesive tape can be used in temperature ranges from -100 to +240 degrees, addressing various challenges in the sterilization process. 【Application Scenarios】 - Fixing parts of medical devices - Sealing sterilization bags - Label fixation in high-temperature environments 【Benefits of Implementation】 - High heat resistance ensures reliable support for sterilization processes - Good thermal conductivity promotes uniform heating - Excellent strength prevents peeling after sterilization

In the automotive industry, durability and thermal conductivity in high-temperature environments are crucial for engine protection. It is necessary to efficiently dissipate heat from within the engine and prevent component degradation. GTT adhesive tape can be used in a wide temperature range from -100 to +240 degrees and excels in thermal conductivity, contributing to engine protection. 【Usage Scenarios】 * Heat management in the engine compartment * Protection from heat sources * Surface coating for heat press and heat sealer crimping areas 【Benefits of Implementation】 * Maintenance of engine performance * Prolonged lifespan of components * Reduction of heat-related issues

In the energy industry, high durability and improved thermal efficiency are required for insulation applications in high-temperature environments. It is particularly important to manage heat efficiently and minimize energy loss. Inadequate insulation materials can lead to decreased energy efficiency and increased costs. Our adhesive tape/GTT can be used in temperature ranges from -100 to +240 degrees, has good thermal conductivity, and offers strong durability. This contributes to the improvement of energy efficiency. 【Usage Scenarios】 * Insulation of heat exchangers * Protection of high-temperature piping * Fixing of insulation materials 【Effects of Implementation】 * Reduction of energy loss * Extension of equipment lifespan * Reduction of operating costs

In the packaging industry, maintaining product quality and ensuring safe transportation are the top priorities. Particularly in the sealing process under high-temperature conditions, the performance of adhesive tape significantly affects the protective capability of the product. Improper use of adhesive tape can lead to product damage due to poor sealing and deterioration of quality during transportation. Our "Adhesive Tape/GTT" is designed to withstand a wide temperature range from -100 to +240 degrees, making it ideal for heat sealing processes. The combination of fluororesin-impregnated glass cloth and silicone-based pressure-sensitive adhesive achieves high heat resistance and strength, ensuring reliable protection for products. 【Usage Scenarios】 * Sealing packaging materials with heat press * Surface coating for heat sealer crimping sections * Product protection in high-temperature environments 【Benefits of Implementation】 * High heat resistance allows for stable sealing even in high-temperature conditions * Thin material with good thermal conductivity enables efficient work * Good strength firmly protects the product * Improves product quality retention and safety during transportation

In the semiconductor manufacturing industry's clean rooms, it is crucial to prevent the intrusion of fine dust and particles to maintain product quality. Temperature control is also essential, as it significantly affects product performance, requiring strict temperature management. GTT adhesive tape can accommodate a wide temperature range from -100 to +240 degrees and can be utilized for various applications within clean rooms. Its thin material and excellent thermal conductivity make it ideal for areas where temperature management is necessary. 【Usage Scenarios】 - Heat pressing - Surface coating of heat sealer crimping areas 【Benefits of Implementation】 - Improved efficiency in temperature management - Enhanced product quality

In the aerospace industry, high impact resistance and stable performance over a wide temperature range are required. In particular, the reliability of materials is crucial in areas exposed to harsh environments, such as aircraft components and spacecraft. Fluororesin/aramid fabric excels in impact resistance and can be used over a wide temperature range of -100 to +180°C. It also has high insulation properties, making it ideal for aerospace applications. 【Application Scenarios】 * Aircraft interior materials * Insulation materials for spacecraft * Protective materials for electronic devices 【Benefits of Implementation】 * Improved impact resistance * Ensured insulation properties * Stable performance over a wide temperature range