環境エネルギー List of Products and Services

A caliper with a high resolution of 1μm covers the measurement of six micrometers with just one unit. It can control and maintain a constant measuring pressure, allowing for stable measurements. The display unit is made in Switzerland, while the mechanical parts are made in Ukraine. High-precision caliper manufactured by Ukraine Microtech.

The M3 model electronic micrometer display, manufactured by France-Metro, is a compact, high-performance, and high-precision device. It can connect two channels and supports analog display, digital display, and simultaneous display of both channels. Despite being designed to be compact, it is equipped with many features such as automatic switching, simultaneous display, calculations, and MAX-MIN display.

When performing multi-point measurements with multiple sensors, each requires an amplifier and a display device, and connecting each to the PLC for data acquisition can create a heavy load and various issues. By using the M400 + M-Bus connection, many devices can be connected at once, and the M400 display analyzer can determine OK/NG status, sending only the OK/NG signals and measurement values to the PLC. This reduces the burden on the PLC and allows for simultaneous display of 32 channels, improving visibility and enabling management of two measurement stations using the group automatic switching function. It is a revolutionary display device.

Even after many years of use, it has a conversion structure that is resistant to changes in accuracy, allowing for stable use over a long period. The contact points can be easily replaced when worn, and they can also be used for an extended period after replacement. The repeatability precision is between 0.5 to 1 μm (depending on size), ensuring high reliability. You can choose from ordinary steel, carbide, and ruby for the contact points. For measuring aluminum materials, we recommend ordinary steel or carbide, while for measuring high-hardness products, we recommend using ruby. KT series for internal diameter splines/internal gear SS series for stop holes There are many variations for width measurement and O-ring groove measurement, and some items are not listed in the catalog, so please feel free to contact us.

The indicating plug gauge allows for quick and easy measurement of inner diameters while achieving high precision. The advantages gained by using an indicator are significant, enabling numerical management that was not possible with NO/GO plug gauges. Both dial gauges and indicator micrometers can be used, but by utilizing the M3 display from France-Metro, data management in the digital age becomes feasible. The indicating plug gauge PMK is manufactured individually to match the size of the hole being measured. The manufacturing ideas that achieve short delivery times and low prices are excellent, and it can accommodate a wide variety of hole diameters and tolerances. The PMK indicating plug gauge can also be designed in a shape that allows it to be mounted on a robot, thus automating and reducing manual measurement efforts. It is produced to ensure that the fit between the measuring hole and the plug corresponds to tolerance IT8, with a repeatability precision of less than 1μm. There are also plenty of options available, including holders and depth setting rings.

The standard model M3 is used as a standalone unit, but this M3P comes with a panel mounting attachment as standard. By connecting it to a 24V power supply, the power switch interlock function will operate. An 8-channel I/O unit is provided, making external control very easy.

Measuring plus and minus with zero at the center, gauge micrometer (comparator) with a reading of 0.001mm and centistats with a reading of 0.01mm. It can be used with bore gauges, cylinder gauges, indicating micrometers, indicating snap gauges, etc. ***The accuracy notation has been changed due to standard modifications.***

Even after being spun off from the old East German Carl Zeiss and merging with Steinmeyer, the Passameter continues to be produced. A digital Passameter has been added to the lineup. It allows for outer diameter measurements with a measurement range of 4mm and a display resolution of 0.0001mm, achieving high precision.

This is a high-precision M3-type electric micrometer manufactured by France-Metro, incorporating our technology to perform stable measurements in contact mode for materials such as film, rubber, thin films, and wire diameters, which are unstable when measured non-contact. We will select the optimal options for measurement probes and measurement pressure from a wide range of choices. Our experienced technicians are available to provide advice, so please feel free to contact us.

Contact / Non-contact three-dimensional measurement machine fixture system. SWA39 - Uses an easily exchangeable table to switch between small quantities of various types. SPANNFIX PRO/ECO - For large/small three-dimensional measurement machines. QUADEREIX - For vertical fixation. SCHIENENFIX - Dedicated to non-contact three-dimensional measurement machines. MICROFIX - Specifically for fixing extremely small workpieces. With a highly versatile clamp, it enhances the reproducibility of workpiece positioning. Fixing with heat guns or clay does not provide the desired reproducibility. The foundation of measurement starts with fixation.

The "BMG Series" is a length calibration device that can accurately calibrate measuring tools such as tape measures, straight rulers, metal rulers, and pipe tapes. Measuring tools used daily, such as tape measures and straight rulers, may experience changes over time, and non-metal products may have the potential for stretching or shrinking. Regular calibration ensures traceability to national standards, allowing for accurate length measurements. The device fixes items like tape measures and compares the reading position with the position of the built-in scale for measurement. 【Features】 ■ Variations of 2000mm, 3000mm, 5000mm, and 10000mm ■ Three types of reading mechanisms available: - Fully automatic scale auto-recognition / semi-automatic motor assist / manual scale alignment ■ Reading resolution is very high at 1μm ■ Clamps and supports tailored to each measurement target are included as standard *For more details, please refer to the PDF document or feel free to contact us.

The 『KNT-4050/01』 is a master that allows for easy and convenient verification of stylus checks that were previously very difficult. It enables the inspection of the stylus under the same conditions as actual measurements, which was primarily done through microscopic observation. During this process, it is processed as a digitally handled contour shape, allowing for the inspection of not only the stylus but also the performance of the equipment. The material is hard stainless steel with a hard chrome layer formed on it, making it resistant to rust and scratches. 【Features】 ■ Easy and convenient verification of stylus checks ■ Inspection of the stylus under the same conditions as actual measurements ■ Processed as a digitally handled contour shape ■ Performance of the equipment is also inspected ■ Material consists of hard stainless steel with a hard chrome layer *For more details, please refer to the PDF document or feel free to contact us.

The product "KNT-4070/03" is a master manufactured and sold by the German company HALLE, which reproduces the roughness range known as super fine. It is available in three types within the range of Ra: 20 to 100nm / Rz: 100 to 500nm. An inspection certificate from the PTB (Federal Institute of Physics and Technology) in Germany can be attached. Issuance of a certificate from the German Calibration Service DAkkS (DKD) is also possible. 【Features】 - Manufactured so that the same profile repeats for the measured length, allowing for the same results regardless of where measurement begins. - Produced using a special manufacturing method, a proprietary technology of HALLE. - Reproduces the roughness range known as super fine. - Available in three types within the range of Ra: 20 to 100nm / Rz: 100 to 500nm. *For more details, please refer to the PDF document or feel free to contact us.

The product "KNT-4080/03/6" features a shape with six trapezoidal grooves and is a step master with a flat-bottom wide groove that corresponds to JIS B 0659-1 (ISO 5436-1) Type A1. Traceability to the PTB (Federal Institute of Physics and Technology, Germany) is guaranteed. Issuance of certificates from the German Calibration Service DAkkS (DKD) is also possible. Since DAkkS is an organization accredited under ISO 17025/ILAC-MRA, it is effective in Japan as well. 【Features】 ■ The master has one type with six grooves - 6 grooves, 0.24/0.75/2.4/7.5/24/75 μm ■ Calibration certificate - PTB (Federal Institute of Physics and Technology, Germany) - DAkkS (DKD) ISO 17025 ILAC/MRA accredited organization - HALLE Corporation *For more details, please refer to the PDF document or feel free to contact us.

The "Passameter 3901" is a product that offers ease of use and high repeatability from the original manufacturer. Since the measuring surface can be set up without rotating, it can be set up while maintaining parallelism. The adjustable dial, similar to a standard dial gauge, has a relatively large scale interval of 0.8mm. Additionally, we also offer the "Digital Passameter 3902," which has a movable range of 4mm. 【Features】 ■ Built-in indicator with a resolution of 1μm/2μm, depending on the model ■ Indicator measurement range ±70μm (1μm reading) / ±140μm (2μm reading) ■ Measurement pressure 5-10N ■ Dial side measuring probe movement of 2.5mm *For more details, please refer to the PDF document or feel free to contact us.

The "3D Measuring Machine Calibration Equipment" is a product for 3D measuring machines from Kolb and Baumann. It uses optically superior ceramics and is adaptable for both optical and contact measurements. A KOBA calibration certificate is provided as standard, and an optional DAkkS (formerly DKD) calibration certificate is also available. 【Features】 ■ For 3D measuring machines ■ Uses optically superior ceramics ■ Adaptable for optical and contact measurements ■ KOBA calibration certificate (standard) ■ DAkkS (formerly DKD) calibration certificate (optional) *For more details, please refer to the PDF document or feel free to contact us.

This product is a ball bar type one-dimensional calibrator that determines the position of the sphere based on the length of the bar. The measuring sphere and distance tube are supported by a three-point support system under constant tension, ensuring high reproducibility despite being modular. The contact surfaces of the pipes are made of carbide, providing long-term stability. By connecting the spheres mounted in the axial direction, measurement uncertainty is minimized. The tube is detachable and can be assembled in a short time. 【Features】 - Standard sizes available up to 8 meters in three sizes - Custom sizes (sphere diameter, pitch, length) can also be produced - Uses corrosion-resistant ceramic spheres - Distance tubes made of steel (special stainless steel) or CFC material - Base made of aluminum for lightweight design, easy to handle even at a maximum length of 1,800 mm - Flexible support allows for easy adjustment of measurement height and angle *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "Step Gauge" for contact and non-contact three-dimensional measuring machines, made from materials with excellent corrosion resistance. The measuring surface can be selected from a high-brightness, high-reflective surface that has been lapped, or a surface with low reflectivity. The customized design for the system can be used over a wide range. 【Features】 ■ For contact and non-contact three-dimensional measuring machines ■ Choice of lapped high-brightness, high-reflective surface or low-reflectivity surface ■ Made from materials with excellent corrosion resistance ■ Customized design available for a wide range of applications *For more details, please refer to the PDF document or feel free to contact us.

The "Spherical Standard Calibration Sphere" is a product designed for laser scanners and video measurement systems, made from materials with excellent corrosion resistance. The measurement surface can be selected from a high-brightness, high-reflective surface that has been wrapped, or a surface with low reflectivity. The reference spheres are available in diameters of 50, 30, and 20 mm, and we also offer high-precision ceramic reference spheres (glossy surface) for contact measurement. 【Features】 ■ Choice of wrapped high-brightness, high-reflective surfaces or low-reflectivity surfaces ■ Made from materials with excellent corrosion resistance ■ Reference spheres available in diameters of 50, 30, and 20 mm ■ High-precision ceramic reference spheres (glossy surface) also available for contact measurement ■ Standard KOBA calibration certificate included *For more details, please refer to the PDF document or feel free to contact us.

Measuring high precision right angles is quite difficult, but it can be easily measured manually. Measurements are taken based on the right angle with the end face after machining the cylinder and using the surface plate as a reference.

We have changed the reading from 5μm to 1μm, allowing us to reduce the maximum permissible error (MPE) by half. The electronic unit is a reliable Swiss-made product, which is combined with hardware manufactured in-house by Microtech to create the final product. It undergoes 100% accuracy testing at the ISO17025 certified organization NAAU in Ukraine before shipment. This is a gear digital caliper with unwavering traceability. There are few companies manufacturing gear calipers, and we have started production in response to demand.

The main unit alone has 14 types across 4 categories, with over 3,000 combinations of various accessories. By selecting a dial gauge holder and a magnetic clamp, you can create a sturdy dial gauge stand. If you make the main unit a hygienic line, it can also be used in clean rooms. Whether it's for fixing cameras, clamping samples, securing cutting fluid hoses, or measuring, anything can be fixed depending on your ideas.