マツキ List of Products and Services

The "P5-2500A" can be used as an engine starting booster, start booster, and battery auxiliary power supply. The cranking current is approximately 850A maximum, and the cranking time is up to 6 seconds. It comes standard with an AC/DC charger, cigarette lighter charging, and cable specifications, with a total cable length of 143cm with clamps. 【Features】 ■ Equipped with LED ■ Weight: 6.7kg ■ Dimensions (cm): W31 x D16.5 x H36.5 ■ Standard accessories (AC/DC charger, cigarette lighter charging, cable specifications) *For more details, please refer to the PDF document or feel free to contact us.

• Other energy equipment
• Other work tools
• Other Auto Parts

The "RMH-72" is a rubber hammer that utilizes a special rubber that is elastic but hardens during use. By using a hexagonal head, the force is evenly distributed. The special rubber is soft under normal conditions but becomes hard when struck. It is used for pressing and securing vehicle door weather strips, fender arch moldings, outside door moldings, and interior clip parts. 【Features】 - Utilizes a special rubber that is elastic but hardens during use - Used for pressing and securing vehicle door weather strips, fender arch moldings, outside door moldings, and interior clip parts - The hexagonal head evenly distributes force - The ergonomically designed handle ensures efficient force transmission - The special rubber is soft under normal conditions but becomes hard when struck *For more details, please refer to the PDF document or feel free to contact us.

• hammer

The "CRS-154" is a craft scissors with a rust-resistant stainless steel blade. The serrated edge allows for cutting without missing the target. It is suitable for use with double-sided tape and has a Teflon coating, making it capable of cutting cardboard, tablecloths, plastic, CDs, cards, paper, and more. 【Features】 ■ Dimensions: 154mm ■ Rust-resistant stainless steel blade ■ Teflon coating on the blade makes it ideal for use with double-sided tape ■ Serrated edge allows for cutting without missing the target ■ Can cut cardboard, tablecloths, plastic, CDs, cards, paper, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

At Matsuki Co., Ltd., we handle the bending tool 'ABD-145N'. Using a pre-folding hand tool, the bent part is pressed down about 1 cm at a time at an angle of approximately 50°. Since resin is attached to the parts that come into contact with the panel surface and edges, it is less prone to scratches. 【Specifications】 ■ Overall length: 223mm ■ Weight: 1.08Kg ■ Air consumption: 0.51m3/min ■ Noise level: 82/(93)dBA ■ Vibration value: a/k: <2.5m/s2 *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig

The "ACF-160" is a coolant funnel with a semi-transparent main body and connecting pipes, allowing for visual confirmation of the injection status. It comes with one straight connecting pipe and two angled at 135 degrees, making it versatile for various situations. After injection, removing the main body prevents excess coolant leakage with its spring function. 【Features】 ■ Compatible with various vehicle models using three types of attachments ■ Equipped with a one-touch valve to prevent LLC spillage ■ Injection status can be visually confirmed ■ Usable in various situations ■ Prevents excess coolant leakage with a spring function *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The MIA505 checks the balance between cylinders simply by placing it on the coil. You can see which cylinder has a problem and whether the balance is properly maintained. It offers four types of measurement methods and displays, and the color LCD makes it easy to read. 【Features】 ■ Checks all vehicles in stock to prevent troubles in advance with preventive maintenance ■ Increases sales by replacing all plugs and coils ■ Allows you to see which cylinder has a problem and whether the balance is properly maintained ■ Four types of measurement methods and displays *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "WTRDC-5140" is a 5-position torque wrench specifically designed for wheel nuts. It is a dedicated product designed to tighten automotive wheel nuts at torque values of 85, 103, 108, 120, and 140 N·m. It is now compatible with the new Prius model. There is also a "WTRDC-5140S" that comes with dedicated sockets for wheel nuts in 19 and 21 mm. Additionally, we offer a 1/2" DR. socket specifically for wheel nuts. 【Features】 ■ Specifically for wheel nuts ■ Designed to tighten automotive wheel nuts at torque values of 85, 103, 108, 120, and 140 N·m ■ Adjust the set torque by pulling the end part and turning it clockwise to 85, 103, 108, 120, or 140 N·m *For more details, please refer to the PDF document or feel free to contact us.

• Torque wrench

One kit can accommodate approximately 100 installations. The kit contains 22 items necessary for the installation. It is the latest window seal repair system. For more details, please download the catalog or contact us.

• Calibration and repair

The AHS-185 is a heavy-duty scissor that is lightweight, easy to hold, and has a non-slip grip. The serrated edge ensures that the cutting target is securely held, and the sharp blades allow for a wide range of uses from aluminum sheets to tissue paper. The lock lever features a nylon cap for easy one-handed operation. 【Features】 - Stainless steel blades are sharp and durable - Lightweight and easy to hold with a non-slip grip - Serrated edge prevents cutting targets from slipping - Sharp blades allow for a wide range of uses from aluminum sheets to tissue paper - Spring-loaded for easy opening *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "AES-160" is an electric scissors with a special serrated blade design that allows for smooth cutting without missing the material being cut. Since the grip and blade are integrated, there is no problem with gripping the outside of the grip firmly. Additionally, it features a wire stripper function for 1.5mm² and 2.5mm² wires. 【Features】 ■ Rust-resistant stainless steel blade ■ Wire stripper function for 1.5mm² and 2.5mm² ■ Can crimp terminals on the inside of the grip ■ Serrated blade allows for smooth cutting without missing the material ■ Easily cuts wires (such as VVF) with light force ■ Convenient compact size for portability, comes with a storage case *For more details, please refer to the PDF document or feel free to contact us.

• Office supplies and stationery

"EZ Blast" is a blasting method that uses a magic powder primarily made from baking soda as its main ingredient, boasting over 50 years of history and consideration for the environment. It offers higher cost-effectiveness compared to traditional methods, while being safe and non-toxic, making it suitable for the future. With a uniquely developed nozzle, it can shoot baking soda media in both dry and wet shots, and it is also capable of water-only spraying. 【Features】 ■ Blasting using magic powder derived from baking soda ■ Usable in both dry shot and wet shot ■ Unique finish and usability of baking soda media ■ The base material is less prone to rust after work *For more details, please refer to the PDF materials or feel free to contact us.

• Other consumables

The "46302M" is a portable type two-tier bearing drawer toolbox equipped with a carefully selected set of tools, featuring a 9.5mm drive size starter tool kit. It comes standard with a smart head ratchet (MHR-3). It's even smarter than the conventional compact head! Achieving a slim design and high torque. The EVA resin tray adopts a luxurious black color. It is elastic and features size markings, making tool management very convenient. 【Features】 ■ Drive size: 9.5mm ■ 9-piece ball point key wrench set with extractor function: - Adopts a three-flat shape (exhibits great power when dealing with stripped screws) ■ Bearing-type drawer: Light and smooth sliding ■ Two-tier toolbox ■ Round magnetic tray *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

The "51402M" is a 1/2" drive tool kit suitable for maintenance of medium to large vehicles that require powerful work, as well as for servicing components like the suspension. It comes standard with a reinforced long flex handle. The long type, measuring 450mm in total length, is recommended for easier torque application. The EVA resin tray features a luxurious black color. It is elastic and has size markings, making tool management very convenient. 【Features】 ■ Drive square: 12.7mm ■ 9-piece ball point hex wrench set with extractor function: - Adopts a tri-flat shape (provides great power when dealing with stripped screws) ■ Bearing-type drawer: Light and smooth sliding ■ Reversible gear wrench: The socket part has a ring to securely hold nuts - Can accommodate go-through sockets, and there are no issues with long protruding bolts *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

The "AW-783 SILENCE" is a quiet type 12.7mm square impact wrench. Despite being lightweight and compact, it delivers a high power of up to 450Nm. It features a reverse lever on the back and a regulator that can be adjusted in four stages, and it also has a built-in silencer. 【Features】 ■ Lightweight and compact ■ High power of up to 450Nm ■ Reverse lever on the back ■ Four-stage adjustable regulator ■ Built-in silencer *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

Our original brand "AUTOBAHN" offers the 'MR-237S', a stubby socket and bit set stored in a lightweight and sturdy compact case. The stubby sockets are compact in both height and outer diameter, making them highly functional even in narrow and tight spaces. Additionally, the micro head ratchet and stubby micro bit ratchet feature top-class compact heads with 72 teeth. 【Features】 ■ Lightweight and durable compact case ■ Compact size, ideal for use in narrow and tight spaces ■ Achieves a compact head design *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

【Features】 - Equipped with 21 LED lights to ensure visibility in the work area. - Made of durable EVA material. - Lightweight, can be folded into three parts for compact and convenient portability. - Gently protects the back, knees, and feet with cushioning material during work. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "MAG-160" is an air blow gun that can blow away dust, dirt, and moisture generated during work, keeping machines and equipment clean. Additionally, this product is lightweight and easy to use. We also offer a safety nozzle "MAGR-01" with a rubber cover at the tip to protect painted surfaces and areas that are prone to scratches. 【Features】 ■ Blows away dust, dirt, and moisture generated during work ■ Keeps machines and equipment clean ■ Lightweight and easy to use *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

The "Air Blower & Movable High Volume Air Nozzle" blows away dust, dirt, and moisture generated during work with air, keeping machines and equipment clean. It is lightweight and easy to use, with a maximum air pressure of 1.17 MPa. The exhaust volume when using the high volume air nozzle is three times that of a standard nozzle. 【Features】 ■ Keeps work machines and equipment clean ■ Lightweight and easy to use ■ Maximum air pressure of 1.17 MPa ■ Exhaust volume three times that of a standard nozzle (when using the high volume air nozzle) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "FMHS312S" is a flex socket set that demonstrates its power in tasks in narrow and recessed areas. It offers a full range of sizes from 8 to 19mm. [Features] ■ For work in narrow and recessed areas ■ Full range of sizes from 8 to 19mm *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Flex Flare Cross Wrench" is convenient for brake bleeding due to its 75-degree deep offset. With its flexible mechanism, it can be easily used in tight engine spaces. 【Features】 ■ 75-degree deep offset ■ For bleeding air in 8mm light vehicles ■ Equipped with a flexible mechanism ■ Can be easily used around the engine *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "LRS-280A" is a telescopic scraper that is useful for removing stickers from windshields and bumpers. It features a three-stage telescopic design that allows it to reach recessed areas conveniently. The blade can be easily replaced. Replacement blades can be stored inside the hollow handle. 【Features】 ■ Effective for sticker removal ■ Three-stage telescopic design ■ Conveniently reaches recessed areas ■ Easy blade replacement *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "MR-225B" is a 25-piece mini ratchet set with a short bit of 16mm in length, making it highly convenient for use in tight spaces. 【Features】 ■ Excellent usability in narrow spaces ■ Case dimensions: 78×132×40mm ■ Weight: 270g *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "MWH315" is a wrench holder equipped with a powerful magnet that is convenient for organizing and storing wrenches. It can hold 15 sockets and can be used anywhere that magnets stick, such as inside a tool chest. You can choose from two colors: black and red. 【Features】 ■ Equipped with a powerful magnet for convenient organization and storage ■ Usable anywhere that magnets stick ■ Can hold 15 sockets ■ Color variations: red, black *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Diamond Oil Filter Wrench" can be powerfully held with its three claws that are replaceable and removable, featuring a diamond coating. It is held in place on the oil filter with a strong magnet, allowing for easy centering with just a light turn. It can be easily removed by turning it in the opposite direction. There are two types available: 3/8”DR (9.5mm) type and 1/2”DR (12.7mm) type. 【Features】 ■ Removable and replaceable claws ■ Strongly held with three claws coated in diamond ■ Centering is possible just by turning it with a strong magnet ■ Easy to remove *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

The "P-E305A" is a 5-piece insulated tool set that has passed compliance standards such as EN60900 and IEC60900, making it suitable for the maintenance of HV (hybrid vehicles) and EV (electric vehicles). It features a strong single-layer coating that is resistant to wear and peeling. Compared to rubber-based insulating materials, the special coating process achieves a thin design. Usability in tight spaces has also been improved. 【Features】 ■ Complies with EN60900 and IEC60900 standards ■ Hard injection molding (strong single-layer coating) ■ Special coating process achieves a thin design ■ Improved usability in tight spaces ■ Enhanced durability *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

The "RGW-4S" is a 4-piece reverse gear wrench set that improves work efficiency by adopting a gear with 72 teeth for the wrench part, allowing for precise tightening. With its unique spline shape, it can accommodate various screws with just one size. After removing the tray, it can also be used as a storage case by inserting the upper tray into the lower one. 【Features】 ■ Wrench part with 72 teeth (5-degree engagement angle) ■ Excellent workability ■ Unique spline shape ■ Accommodates various screws with just one size *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

The "WH-2S" is a wheel hanger set used to improve work efficiency during wheel changes. It prevents the diagonal placement of wheel nuts, allowing for accurate torque management. Since there is no need to lift the tire when hand-tightening the wheel nuts, heavy tire change work can be done safely and easily. *There is also a version available for steel wheels. Please contact us separately for more information. 【Features】 ■ Makes heavy tire change work easy ■ Allows hand-tightening of wheel nuts without lifting the tire ■ Prevents diagonal placement of wheel nuts ■ Enables accurate torque management *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets

The "SHL7713A" features a COB strip light, enabling a flat and brighter illumination. It comes standard with high-brightness COBs in two locations: the front and the top, allowing for versatile use depending on the purpose. The body can move 180° back and forth and rotate 360° left and right, making it suitable for any work environment. It also has a convenient foldable hook on the back. Equipped with a battery indicator! You can easily see the charging status and remaining battery level at a glance. 【Features】 ■ Durability + Shock Resistance ■ Special Rubber Coating ■ COB Strip Light Adoption ■ Increased Work Efficiency with Magnets on the Bottom and Back ■ Waterproof Level IP65 Compliance ■ Battery Indicator Included *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "MR-2043S" is a set of 43 pieces, including bits and short sockets. It features a compact body approximately 120mm long with a 1/4" bit drive, a push-release 1/4" square drive, and a spinner wheel for quick rotation, along with a 180° flexible function. With its tight body and thin head with 72 gears, it excels in tasks with limited clearance. 【Features】 ■ Excellent usability in tight spaces ■ 72 gear teeth ■ Spinner hole for quick rotation ■ Slides to hold bits *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "78303M Series" is a 3/8" & 1/4" DR. 78PC. tool kit from the automotive maintenance tool brand "Autobahn." The tray is made of flexible and durable EVA resin, making it very convenient for tool management with a size chart included. Choose from four colors: red, black, silver, and orange. 【Features】 ■ Convenient side handles for easy portability ■ Bearing-type drawers for light and smooth sliding *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "ZRV Series" is a high-pressure hot water cleaning machine that employs a short-frame burner in a high-efficiency boiler, enabling continuous supply of high-temperature water. It condenses the know-how of cleaning machines into an environmentally friendly, compact, and lightweight body. Despite its small size, it boasts exceptional cleaning power, performance, and durability. Additionally, it uses ZAM steel plates that are resistant to rust, except for the front panel. The lineup includes the "ZRV-1000," which has a discharge pressure of 3 to 9 MPa (approximately 90 kgf/cm²), as well as the "ZRV-1200" and "ZRV-1700." 【Features】 ■ Condenses the know-how of cleaning machines into an environmentally friendly, compact, and lightweight body ■ Exceptional cleaning power, performance, and durability despite its small size ■ Employs a short-frame burner in a high-efficiency boiler ■ Capable of continuous supply of high-temperature water ■ Uses rust-resistant ZAM steel plates (except for the front panel) *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

The "Autobahn Professional Tool" is the comprehensive catalog of Matsuki Co., Ltd., which specializes in wholesale sales of automotive mechanical tools. It features essential ADAS calibration toolkits for specific maintenance, as well as jump starters and wheel balancers. We introduce the tool brand "Autobahn," which runs alongside the future of the automotive maintenance industry, focusing on cost performance, ease of use, and safety. [Contents] ■ ADAS Calibration Tool Kit ■ Millimeter Wave Radar Reflector Set ■ Jump Starter ■ Wheel Balancer ■ Tire Changer ■ Tool Kit, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "b9100" is a wheel balancer that boasts high reliability and accuracy, offered at an affordable price. With a compact design that saves installation space, it features a textured surface finish that promises excellent durability. To ensure stability even with heavy wheels, it employs a 40mm shaft. 【Features】 ■ High reliability and accuracy ■ Affordable price ■ Optimization function for tires and wheels ■ RPI technology ■ Compact design ■ Excellent durability with textured surface finish *For more details, please download the PDF or contact us.

• Power tools

The "T-2500" is a tilt-back tire changer. Equipped with a pressure limiter, air filter, and oil reservoir, it ensures safe operability and durability. By adopting a specially designed tilt-back body, it minimizes tension even when mounting or dismounting hard tires. 【Features】 ■ High durability ■ Reliable operability ■ Quick and user-friendly operation ■ Ergonomically considerate design ■ Safety ■ Accurate work *For more details, please download the PDF or contact us.

• Other work tools

"ABD-145" is a bending tool that can be used while checking, handled by Matsuki Co., Ltd., which specializes in wholesale sales of automotive machine tools. To use it, bend the panel at about a 45-degree angle using the base and hammer, and then press the panel left and right using the white line as a guide. Additionally, we offer other automotive machine tool products such as wheel balancers and tire changers. [Features] ■ Easy to use ■ Reduces work time for tasks like attaching batten *For more details, please download the PDF or contact us.

• Other work tools