ソーキ List of Products and Services

It is a first-class level with a standard deviation of 0.2mm for a 1km round trip.

• Distance measuring device

It remembers data for 16 types of trees, and by calling up the sample number of the target, it can be measured directly without conversion. 【Features】 ■ Direct measurement of 16 types of wood. It stores data for 16 species of trees. By calling up the sample number of the target, it can be measured directly without conversion. ■ Upper limit alarm setting. It can be set to emit an alarm sound when the moisture value exceeds the management upper limit. The setting range is between 10% and 39%. ■ Moisture value correction. The displayed moisture value can be corrected between -9.9% and +9.9% to match the actual conditions. ■ Temperature correction function. When there is a significant temperature difference, such as between the room temperature of the measurement location and the freshly dried wood, it affects the measurement values. This is automatically corrected. ■ Auto power-off function. If no operation is performed for about 5 minutes, the power will automatically turn off.

• Other environmental analysis equipment

■It records vibrations using an electronic system with a 3-axis accelerometer. ■No battery replacement is required for up to 60 days. *Recorded data can be imported into the standard attached software using USB.

• Other security and surveillance systems

- The static penetration resistance of the soil is measured to assess its hardness or softness, as well as the composition of the soil layers, and is used for preliminary investigations or supplementary surveys such as boring for weak layers within a depth of 10 meters. - It is based on the JIS draft of the Japanese Geotechnical Society and is applicable to all soil layers excluding gravel as an auxiliary method for standard penetration tests.

• Soil testing

■ Standard equipped with high-speed response DO sensor ■ No cables needed with large-capacity built-in memory ■ Built-in rechargeable lithium-ion battery ■ Capable of vertical observation with a minimum pitch of 10cm ■ Short-term temporal observation possible ■ Compact and lightweight, approximately 2.0kg in air and about 1.0kg in water

• Water quality testing

■Measurement range: -99.9 to 99.9 Pa ■Compact, lightweight, and pocket-sized. ■Can switch between four units and display maximum/minimum values, with a HOLD function to freeze the value for viewing.

• Other measurement, recording and measuring instruments

■Continuous changes in measurement values can be calculated, displayed, and output as flow rates. ■Equipped with a data memory function that can record measurement values, calibration results, and multiple unit masses. ■Includes a display hold function that can also accommodate animal weighing.

• Scale

■Water level measurement work can be performed without grounding. ■Due to the use of a small cross-section and thick material (fiberglass), it is less likely to stick to the inner surface of the pipe. ■Sensitivity can be adjusted, allowing for good performance across a wide range of water qualities. ■The test function can determine if there is a disconnection.

• Other environmental analysis equipment

■ Inspections of bridge piers, under the girder, and support areas can be conducted from the bridge deck. ■ Easy operation with a tablet PC. ■ Capable of capturing still images while recording video. ■ Lightweight and compact, making it convenient to carry. * With a 30x optical zoom, even small damages can be detected from a distance. * Contrast correction, image stabilization, and fog removal functions allow for accurate inspections even under poor conditions.

• Industrial Endoscope

■Automatically adjusts optimal sensitivity according to flow rate ■Compact, lightweight, and low power consumption ■Capable of measuring average flow rates at 1 second / 3 seconds / 5 seconds / 10 seconds / 20 seconds / 40 seconds / 60 seconds ■Easy to read with a large LCD display ■Detector compatibility through coefficient settings

• Flow Meter

■Compatible with various refrigerants Supports almost all types of refrigerants including new refrigerants, conventional refrigerants, and HC refrigerants. *Excludes R12 ■Easy identification of leak locations The gas sampling method is suction-based, making it easy to identify leak locations. ■Compact and lightweight Designed to be compact, making it easy to hold and fits in your pocket. ■Equipped with automatic pump stop function In case of accidental water suction or when the attachment tip is blocked, if a temporary pump error occurs, pressing the switch will return to normal gas detection. ■Automatic gas exhaust mode If gas remains in the device when turning off the power, it automatically enters 'automatic gas exhaust mode' and will turn off the power once the gas has been expelled from the device. (Up to 60 seconds) ■Protection rating IP22 (equivalent to JIS C 0920) Prevents malfunctions due to rainwater intrusion. *When using the leather case

• Odor Testing

■ For self-management of harmful chemicals. Ideal for the safe management of chemicals subject to mandatory risk assessment. It can measure multiple types of gases with one unit, effectively improving work efficiency. ■ Display available in Japanese/English Supports multilingual display including Japanese, making it easy to change settings and perform operations. The full dot display makes both text and numbers easy to read. ■ Screen automatically flips with movement The screen automatically rotates 180 degrees in response to movement. It can also be fixed with an ON/OFF switch. ■ Equipped with an LED light to illuminate the front The LED light can be easily turned on by pressing and holding a button. The screen also has a backlight, enhancing work efficiency in dark environments.

• Odor Testing

■Self-management of harmful chemicals Ideal for the safe management of chemical substances subject to mandatory risk assessment. Capable of measuring multiple types of gases with one unit, effectively improving work efficiency. ■Display available in Japanese/English Supports multilingual display including Japanese, making it easy to perform operations such as setting changes. The full dot display makes both text and numbers easy to read. ■Screen automatically flips with movement The screen automatically rotates 180 degrees in response to movement. It can also be fixed with an ON/OFF switch. ■Equipped with an LED light to illuminate the front Feel secure even in dark places with the LED light! The LED light can be easily turned on by pressing and holding a button. The screen also has a backlight, enhancing work efficiency in dark environments!

• Odor Testing

■Film Thickness Measurement Range The measurement range for thick films up to 15mm can be digitally displayed with a resolution switch of 0.1mm/0.01mm, enabling high-precision measurements. ■Limit Alarm Function The film thickness of the measurement target can be set with upper and lower limits. An alarm sound will warn if the measurement is below or above the target value. ■Key Lock Function Pressing the lock button during measurement locks all keys except the OFF key, preventing erroneous operations and safely maintaining the main functions. ■CVD Magnetic Pole The magnetic pole of the single-point constant pressure probe uses a super wear-resistant CVD-treated magnetic pole, maintaining initial characteristics and high reproducibility even under hard specifications for extended periods. ■Easy-to-Read Digital Display A large LCD display with an enlarged lens has been added for better visibility. The digital display allows for quick and accurate readings. ■Compact Size With a slim, lightweight body, it is easy to operate. This compact size is user-friendly, condensing excellent functionality.

• Coating thickness gauge

■Intrinsic safety explosion-proof structure (Exia2 CT4X) ■Protection level equivalent to IP67, ensuring safety for outdoor work ■Simultaneous display of two-component gas concentrations (hydrogen sulfide/H2S and sulfur dioxide/SO2) on a large LCD screen ■Equipped with clock display and data logging function ■Ideal for ensuring the safety of each worker in their surroundings

• Odor Testing

■Direct reading of surface salinity concentration using four methods - Water-soluble salinity concentration display (PSPC compatible) - Water-soluble salinity concentration display (using conversion formula from ISO 8502-9) - Sodium chloride concentration display - Electrical conductivity display ■Easy measurement The measurement cell is fixed by magnetic force, and by simply injecting measurement water (pure water), the surface salinity concentration can be measured. There is no need for the cumbersome operation of wiping the surface of the measurement target and extracting it into a solution. ■Measurement cell fixed by magnetic force Unlike the Bresle method, it does not dirty the surface with adhesive. *The measurement target is a flat magnetic material. ■The main unit and measurement cell are compact and lightweight for easy portability.

• Other environmental analysis equipment

■ Direct reading of surface salinity concentration using four methods - Water-soluble salinity concentration display (PSPC compatible) - Water-soluble salinity concentration display (using conversion formula from ISO 8502-9) - Sodium chloride concentration display - Electrical conductivity display ■ Easy measurement The measurement cell is fixed by magnetic force, and by simply injecting the measurement water (pure water), the surface salinity concentration can be measured. There is no need for the cumbersome operation of wiping the surface of the measurement target and extracting it into a solution. ■ Measurement cell fixed by magnetic force Unlike the Bresle method, it does not dirty the surface with adhesives. *The measurement target is a flat magnetic material. ■ The main unit and measurement cell are compact and lightweight, making them easy to carry.

• Other environmental analysis equipment

■Heating drying and mass measurement method most similar to the standard drying method ■Adoption of high-precision aluminum integrated mass sensor "Uniblock" ■Adoption of a new auto tare mechanism ■Use of medium-wavelength infrared quartz heater as the heat source ■Provision of six measurement modes to meet various measurement requirements ■Ability to register and save ten types of measurement conditions (drying temperature and measurement mode) ■Display of moisture change amount (△M) over 30 seconds in numerical and scale format ■Can be connected to a printer *Printer VZ-330 is an optional item.

• Other environmental analysis equipment

■Carefully selected necessary functions In addition to the basic functions needed on-site, we have condensed additional features that expand the scope of work. This enables efficient surveying operations without waste. ■Easy operation with fewer keys The number of keys is kept to a minimum. The key layout prevents mispressing, allowing for smooth operation even with gloves on, thanks to the 'Back' key for when you're in trouble and the large, easy-to-press 'Distance Measurement' key. ■Convenient simple manual A handy manual that covers basic operations, making it easy to check the operating procedures on-site. ■Easy-to-understand display section The display is in Japanese, with a clear font and large characters, allowing for instant judgment on-site and improving work efficiency. ■High-speed distance measurement High-speed distance measurement of approximately 1.6 seconds for both initial and continuous measurements. This reduces stress during work and significantly improves efficiency. ■Nikon lens The telescope's field of view is bright and clear, making a noticeable difference, especially during evening work. ■Wide distance measurement range Using a mini prism allows for distance measurement up to 1,000 meters, making it highly effective even on large construction sites. ■Convenient AA battery-type battery Powered by four AA Ni-MH batteries, it can be used continuously for 6 hours. A fully charged set of AA batteries can sufficiently cover a day's work.

• Distance measuring device

■Flow velocity values from microflow to high flow can be obtained through digital output. ■Handling and maintenance are very simple. ■Equipped with a memory function. ■Can be used in the field at a water depth of 3 cm or more. ■Data from up to 255 measurement points can be recorded along with calendar information. ■Data processing is possible using a computer.

• Flow Meter

■ Measures resistance with weak electric current, allowing non-destructive verification of steel material quality ■ Can store up to 200 measurement data ■ Two types of sample pieces are included as standard, allowing for accuracy verification at any time ■ Sandpaper and file are also included as standard, enabling immediate inspection preparation ■ Can measure in locations without power supply using the built-in battery

• Flaw detection testing

■Range: 0.001 to 3.999 mg/m³ ■Measurement Method: Light Scattering Method

• Particle Counter

■Outstanding Visibility High-brightness LEDs are used to provide exceptional visibility even during outdoor work. Additionally, the use of three colors of LEDs to indicate the status of the grade allows for intuitive judgment. Furthermore, it is equipped with a four-level detection accuracy switching function, making it suitable for all types of work from dozers to excavators. ■Reliable Environmental Performance The sensors installed on dozers and excavators are subjected to more stress than one might imagine. They are equipped with vibration resistance performance that ensures safe use even under intense vibrations. The sensors are also designed with front screws for easy and secure fastening. Additionally, they have an IP66 environmental performance rating, making them resistant to harsh natural environments. ■Incredible Long Operating Time The automatic brightness switching function adjusts the LED brightness according to the ambient light at the work site. This has successfully reduced power consumption significantly, achieving an astonishing 100 hours of operation on dry batteries.

• Distance measuring device

■Wavelength range: approximately 305 to 2,800 nm ■Sensitivity: 5 mW (KW/m²)

• Other environmental analysis equipment

■Heat flow sensor connection One heat flow sensor (TR2-B) is included as standard. (We also offer rental options for low heat flow sensors (TM1-B) and surface type high heat flow sensors (T500B-B).) ■Compact and lightweight for easy portability ■Display switching allows for toggling between heat flow values in W/m², kcal/m²h, and temperature in °C. ■Internal memory Data memory can be set for 20 groups, storing a total of 100 sets. ■Uses two power sources: two AA batteries and an AC adapter.

• Flow Meter

■Japanese display ■Equipped with memory function for up to 500 data ■Simply pour the sample into the measuring container and set it on the instrument for digital display of results ■Calculation measurement using scattered light and transmitted light at 90℃

• Water quality testing

■Built-in statistical functions All memory data, as well as data by group, block, and session, can be statistically analyzed on the LCD screen. ■Easy-to-understand guide display Messages are displayed on the LCD screen, providing simple and clear guidance on the operation steps. ■Upper and lower limit functions For each registered calibration line, a set of limit values can be configured. If the measurement value falls outside the upper or lower limit range, the set limit values will flash and an alarm will sound. ■Slim body design reduces fatigue during handheld operation ■Calibration line registration function ■Large-capacity measurement value memory function

• Coating thickness gauge

■ Continuous hardness measurement possible from the soil surface to a depth of 1 meter ■ Measurement possible even in gravelly soil layers and consolidated soil layers (approximately 5 times at S value 0.1) ■ Handy type makes it easy to read, allowing measurements to be taken by one person ■ The included graphing software "Penetrodia Graph" allows for clear graphing of measured data, enabling immediate assessment of soil hardness quality

• Soil testing

■Measurement possible in about 3 seconds after inserting the sensor into the soil ■Built-in data logger function ■Compact and lightweight for easy portability ■Comes with dedicated software for managing data on a computer

• Soil testing

■ The goal is to detect defects in the coating and lining films for rust and corrosion prevention without damaging the films. ■ Measurements are taken at low frequencies to avoid high frequencies that are prone to thermal destruction. ■ By reducing power consumption and enabling battery operation, portability in a compact form is achieved. ■ Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively minimize the application time of high voltage. ■ Discharge current is suppressed to avoid impacts on the human body and damage to the coating. ■ The structure allows for the confirmation of voltage applied to the coating and voltage adjustment.

• Flaw detection testing

■The goal is to detect defects in the coating and lining films for rust and corrosion prevention without damaging the films. ■Measurements are taken at low frequency to avoid high frequencies that are prone to thermal destruction. ■Achieving a compact portable design by reducing power consumption and enabling battery operation. ■Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively minimize the application time of high voltage. ■To avoid impacts on the human body and damage to the coating, the discharge current is suppressed. ■The structure allows for confirmation of the voltage applied to the coating and voltage adjustment.

• Flaw detection testing

■ The goal is to detect defects in the coating and lining films related to rust and corrosion without damaging the films. ■ Avoid high frequencies that are prone to thermal destruction and conduct measurements at low frequencies. ■ Achieve miniaturization for portability by reducing power consumption and enabling battery operation. ■ Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively reduce the application time of high voltage. ■ To avoid impacts on the human body and damage to the coating, the discharge current is suppressed. ■ The structure allows for confirmation of the voltage applied to the coating and voltage adjustment.

• Flaw detection testing

- The goal is to detect defects in the anti-corrosion and anti-rust properties of the coating and lining films without damaging the films. - Avoid high frequencies that are prone to thermal destruction and measure at low frequencies. - Achieve miniaturization for portability by reducing power consumption and enabling battery operation. - Considering the degradation of the coating, a high-voltage pulse method is adopted to relatively reduce the application time of high voltage. - The discharge current is suppressed to avoid impacts on the human body and damage to the coating. - The structure allows for the confirmation of the voltage applied to the coating and voltage adjustment.

• Flaw detection testing

■ Battery-operated, allowing for field measurements ■ You can choose reagents that suit your purpose from a diverse range of reagents. ■ Easy and quick measurement ■ Equipped with data memory function

• Water quality testing

- Equipped with a battery level meter function that allows you to see the battery remaining at a glance. - By simultaneously recording instantaneous water levels and rainfall, fluctuations in water levels due to rainfall can be easily assessed. - Wave damping function that averages wave data. - Simple menu operation with just three buttons.

• Other environmental analysis equipment

■It is a rebar detection system using electromagnetic induction. ■It can quickly and easily scan large areas of concrete. ■It displays 2D or 3D images of reinforcement on a tablet, allowing for structural analysis and cover thickness verification on-site. ■The included PC software allows for individual specification and analysis of the rebar diameters in both vertical and horizontal directions.

• Flaw detection testing

■Adjustments after power-on can be easily made with the span adjustment button. ■Equipped with a large and easy-to-understand LCD screen. ■Intrinsic safety explosion-proof structure i3aG4.

• Odor Testing

The tipping bucket rain gauge consists of a receiving section and a recording section of the self-recording electric counter. The receiving section is placed outdoors, while the recording section is installed indoors in the observation room, and both are connected by wires through a battery to operate.

• Other environmental analysis equipment

■ It can be easily measured with anchors on ceilings and walls. ■ It can also accommodate anchors at the base. ■ Using the included tools, measurements of up to 100 kN (10.2 tf) can be taken. ■ The following measurements can be made: Since the load and displacement in 2 channels are always displayed, you can continuously monitor the load and displacement until the confirmation load during the test. - Load can be switched between kN and tf - Displacement is measured in mm - Maximum load can be switched to kN or tf - Displacement at maximum load is in mm

• Flaw detection testing

■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily by themselves. ■Clearly displays maximum value during testing The peak hold function retains the maximum displayed value. The lamp at the top right of the button lights up while peak hold is active. ■Easy to read in dark places or at night The backlight can be turned on/off with the power switch, making it easy to read in dark areas or at night. ■Print measurement data on the spot Pressing the print switch will print the date, time, set value (SET), measured value (MAX), and unit (kN). *Recording paper will be sold starting from the first roll. ■No power cord needed It operates on batteries, so it can be used anywhere without needing a power source. (Uses 4 AA batteries)

• Flaw detection testing

■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily on their own. ■Clear display of maximum values during testing The peak hold function retains the maximum displayed value. The lamp at the top right of the button lights up while peak hold is active. ■Easy to read in dark places or during nighttime work The backlight can be turned on or off with the power switch, making it easy to read in dark areas or at night. ■Print measurement data on the spot Pressing the print button will print the date, time, set value (SET), measured value (MAX), and unit (kN). *Recording paper is sold starting from the first roll. ■No power cord needed It operates on batteries, eliminating the need for a power source, so it can be used anywhere (uses 4 AA batteries).

• Flaw detection testing

■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily on their own. ■Clear display of maximum values during testing The peak hold function retains the maximum displayed value. The lamp in the upper right of the button lights up while the peak hold is active. ■Easy to read in dark places or at night The backlight can be turned on and off with the power switch, making it easy to read in dark areas or at night. ■Print measurement data on the spot Pressing the print button will print the date/year, time, set value (SET), measured value (MAX), and unit (kN). *Recording paper is sold starting from the first roll. ■No power cord needed It operates on batteries, eliminating the need for a power source, so it can be used anywhere (uses 4 AA batteries).

• Flaw detection testing

■Ultra high brightness with maximum output in its class ■High precision ±1mm/10m ■2WAY power supply with dry batteries and AC adapter ■Strong electronic leveling method for vibration-prone sites ■Can be mounted on a dedicated tripod

• Distance measuring device

■ Direct drive with ultrasonic motor ■ A super compact body that re-evaluates the platform from scratch ■ Achieves 5.7 kg despite being a motor-driven total station ■ Automatic sighting function ■ Automatic tracking function ■ Bright and easy-to-see guideline

• Distance measuring device

■The ultrasonic sensor detects people and objects within the detection area, issues a voice warning from the speaker, and simultaneously alerts the operator with an electronic sound. ■Each part can be easily attached and detached using a powerful magnet. ■The volume can be adjusted according to the working environment. (Maximum 95dB) ■The detection distance can be switched according to the application. (600mm, 1500mm) ■When a person or other obstacles enter the detection area, a voice warning is issued: "Please do not enter the restricted area." ■Simultaneously with the detection, the operator is alerted with an electronic sound: "Beep beep beep." ■Dustproof and drip-proof structure.

• Other security and surveillance systems