ソーキ Product Lineup

【Features】 ■ Anyone can start using it immediately with a simple registration application. ■ The 5W high power output covers a wide range. ■ It can be used in noisy environments with a loud volume of 700mW. ■ Instead of channel numbers, it can display up to 8 half-width characters (or 4 full-width characters) using kanji, alphanumeric characters, symbols, and custom characters. ■ Clear sound quality communication is possible through digital communication.

• Other environmental analysis equipment

■ License-free Anyone can use it immediately with a simple registration application. ■ High output The 5W high power covers a wide range. ■ Loud volume It can be used even in noisy environments with a loud volume of 700mW.

• Analytical Equipment and Devices

【Features】 ■ Can be used for approximately 33 hours with just one AA alkaline battery. ■ Compact card-style design that fits perfectly in your chest pocket, weighing only 130g. ■ Equipped with a BTL circuit and large-diameter speaker for clear sound even in noisy environments. ■ Includes a secret conversation feature to protect privacy, eliminating concerns about third parties overhearing calls. ■ Supports all frequencies with 20 channels for simplex and 27 channels for relay.

• Other electric meters

【Features】 ■ One-push call to the other party, hands-free calling available ■ Simultaneous calling with a phone-like experience using the included headset as per our specifications ■ Key lock to prevent accidental operation ■ Lightweight and compact design ■ Equipped with a monitoring mode to check work conditions ■ Secret conversation feature to protect privacy ■ Power-saving function to reduce battery consumption when not in a call ■ Power-saving function to minimize power consumption

• Testing Equipment and Devices
• Other electronic measuring instruments

【Features】 ■ Capable of measuring the strength of high-strength concrete. ■ The measuring device operates on four AA batteries. ■ Measurement results are displayed on the screen in about 1 second. ■ Approximately 500,000 measurement data can be recorded in the device along with waveform data. ■ If the number of impacts at the same measurement point exceeds 20, it will switch to the conventional point mode. * For more details, please refer to the PDF document or feel free to contact us.

• Other environmental analysis equipment

【Features】 ■ Easy to operate. ■ Complies with the Civil Engineering Research Institute's "Method for Determining the Application of Permeable Concrete Protective Materials (Draft)." * Please refer to the supplementary material of Independent Administrative Institution Civil Engineering Research Institute Document No. 4186, "Method for Determining the Application of Permeable Concrete Protective Materials (Draft)" when using. * For more details, please refer to the PDF document or feel free to contact us.

• Other environmental analysis equipment

■ 2 Measurement Point Function Simultaneous measurement of two different piping systems with a single unit. Side line measurement is also possible. ■ Heat Measurement Function Can be used as a portable calorimeter by connecting temperature resistance elements (Pt-100/up to 4 points). ■ Dust and Splash Proof Structure (IP65) Exhibits waterproof and dustproof capabilities equivalent to IP65 standards even during measurement. ■ Waveform Display Function Allows for visual understanding of the ultrasonic reception wave conditions, enabling quick assessment of the measurement status. ■ Data Transfer via USB Memory Log data (in CSV format) stored in the unit can be transferred to a PC via USB memory. ■ Standard Equipped with Thickness Measurement and Sound Velocity Measurement Functions Demonstrates effectiveness in measuring the thickness of piping and the sound velocity of fluids on-site.

• Other environmental analysis equipment

■ Easy operation and simple measurement The measurement chamber features a sliding cover, eliminating the need for attachment and detachment; you simply open and close it for easy operation. Measurements can be taken with minimal key operations. You can perform measurements through simple processes such as "zero point adjustment," "water color development," and "concentration measurement." ■ Memory for measurement values Up to 99 points of measurement values can be stored in the internal memory of the device. By switching to memory confirmation mode, you can also view the saved content on-site. ■ Equipped with a large, easy-to-read LCD that clearly displays the current mode status and battery level ■ Auto power-off function

• Water quality testing

■ Easy measurement of residual chlorine in tap water and other sources without reagents. ■ Water sampling and immersion measurement are possible. ■ Uses the polarographic method.

• Water quality testing

■ No reagents required, low running costs Adopts the polarographic method. No handling or processing of reagents is necessary. ■ Equipped with a memory function for 1000 data points.

• Water quality testing

■Compact and lightweight Adopting the latest electronics and digital signal processing technology, the size of the converter is 1/7 that of conventional products, and the weight is 1/5. ■High precision The accuracy is high precision ±1.0%. By adopting a new sound velocity measurement method, it can be applied to fluids with unknown sound velocities and is hardly affected by the temperature and pressure of the fluid. ■Improved bubble tolerance Digital signal processing has dramatically improved bubble tolerance. ■Fast response By using a high-speed microprocessor suitable for digital signal processing, the response time is less than 1 second. ■Easy setup with a large graphic LCD and a page selection method using a few keys.

• Other environmental analysis equipment

■ Salt conversion display can be switched. ■ Energy-saving design, rechargeable batteries are also usable.

• Water quality testing

■ Salt conversion display can be switched. ■ Energy-saving design, rechargeable batteries can also be used.

• Water quality testing

■ Large LCD screen for easy data display Font size can be changed, making it easy to check data in the field. ■ Easy operation with one hand Simple operation allows for measurement and data confirmation with one hand, making it easy to operate while immersing the sensor probe with the other hand. ■ Clear icon display ■ One-touch automatic calibration feature ■ Improved shock resistance with soft resin Designed for field measurements, the surface of the display is coated with soft resin to enhance shock resistance, allowing for focused measurements.

• Water quality testing

■ Simplification of blank measurement By reviewing the electrode material, it is freed from multiple blank measurements, making the measurement operation faster and more stable. ■ One-touch method for sliding the electrode holder with one hand The up-and-down motion of the electrode block is done with a one-touch method, resulting in smoother operation and improved work efficiency. ■ Safer and more reliable attachment and detachment of electrodes The electrode and lead wire are integrated, improving current efficiency and contact failure issues. Additionally, attachment and detachment to and from the electrode block can be done easily, safely, and reliably. ■ Pre-alarm timer set for oxidation decomposition time In addition to an alert sound that notifies the end of oxidation decomposition, the pre-alarm timer provides an audible warning as the end approaches, so you are not bound by waiting time. ■ Strong volumetric titration method for colored samples ■ High-precision measurement using the second derivative method for endpoint detection ■ User-friendly operation panel with touch keys and interactive method

• Water quality testing

■ Large LCD display screen that is easy to read Supports display in English, Chinese, German, and more ■ Compact handheld type ■ Equipped with heat consumption calculation function Measures temperatures T1 and T2 to calculate heat consumption. ■ Battery-operated for continuous 12-hour operation Can operate continuously for 12 hours after a full charge. ■ Measurement data storage with SD card Saves instantaneous values, cumulative values, and error information. ■ Convenient USB port for PC connection Transmits data saved on the SD card, such as instantaneous values and cumulative values, to a PC.

• Other environmental analysis equipment

■ Large LCD display screen for easy viewing Supports display in English, Chinese, German, and more ■ Compact handheld type ■ Equipped with heat consumption calculation function Measures temperatures T1 and T2 to calculate heat consumption. ■ Battery-operated for continuous 12-hour operation Can operate continuously for 12 hours after a full charge. ■ Measurement data saved on SD card Saves instantaneous values, cumulative values, and error information. ■ Convenient USB port for PC connection Transmits data saved on the SD card, such as instantaneous values and cumulative values, to the PC.

• Other environmental analysis equipment

■ Simultaneous analysis of various measurement items with three modules Measurement of pH, dissolved oxygen, electrical conductivity, turbidity, temperature, and salinity is possible with standard sensors. ■ Data sampling for up to 35 days Data can be collected for up to 35 days with a measurement cycle of 15-minute intervals. ■ Sensor module has a smart shape of φ45mm The standard sensor module has a diameter of 45mm, making it easy to insert into boring survey pipes (φ50mm), and it features a robust all-stainless steel construction.

• Water quality testing

■ Easy measurement at various locations with portable equipment It is a battery-operated handheld type, allowing measurements to be taken at necessary locations when needed. ■ Compact handheld type ■ Equipped with heat consumption calculation function Measures temperatures T1 and T2 to calculate heat consumption. ■ Battery-operated with continuous operation for 12 hours Can operate continuously for 12 hours after a full charge. ■ Measurement data storage with SD card Saves instantaneous values, cumulative values, and error information. ■ Convenient USB port for PC connection Transmits data saved on the SD card, such as instantaneous values and cumulative values, to a PC.

• Other environmental analysis equipment

■ Built-in bubble correction function ■ The probe body is made of highly durable SUS, and the surface polishing treatment makes it resistant to dirt. ■ To satisfy both turbidity and SS ranges, a unique detection system with two light sources and four detectors using infrared diodes has been introduced.

• Water quality testing

■ Easy to operate and compact ■ Can measure SS quickly and accurately with digital display ■ Capable of measuring both SS and turbidity with one device

• Water quality testing

■ Easy to operate for anyone. ■ Directly reads values in turbidity units (NTU), eliminating the need for calculations or calibration charts. ■ Averages multiple measurements taken within a certain time frame and displays the average signal, reducing noise. ■ Built-in self-diagnosis function (diagnostic mode can be executed by pressing just one key). ■ Can select one of three manual range modes (0-9.99/0-99.9/0-1000 NTU) for measurement. * However, for samples with significant turbidity changes, the auto range mode should be selected. ■ Automatic zero adjustment.

• Water quality testing

■ No sampling required The sensor is of the type that is directly immersed in the water to be tested, so sampling is not necessary. ■ Compact sensor Slimmed down to half the diameter and weight compared to conventional types. ■ Simultaneous measurement/display of turbidity and temperature Operation status, measurement values, units, etc., are displayed collectively on an LCD display. ■ Supports switching between NTU and mg/L units Measurements can be displayed in either unit by switching. ■ Data memory function for 100 measurements Data measured in the field can be checked in the office or other locations. ■ Correction factor setting function If you want to correct the turbidity measurement values to conventional data, you can set the turbidity span coefficient from 0.50 to 1.00 in increments of 0.01.

• Water quality testing

■ Real-time measurement is possible by throwing it into the water to be measured. ■ Improved reliability in low concentration areas. ■ Energy-efficient design. ■ Simple monitoring is possible with immersion measurement. ■ Waterproof structure (IP67) ensures safety for field measurements.

• Water quality testing

■ The custom LCD display has increased in size by approximately 1.2 times, making the screen easier to see. ■ Rechargeable nickel-metal hydride batteries are usable. ■ Comprehensive validation support features. ■ Energy-saving design. ■ Data memory function. ■ Approved model under the Measurement Law.

• Water quality testing

【Features】 ■ Adopts a large LCD display for easy visibility of detection results. ■ Seven detection modes selectable by material. ■ Equipped with an LCD backlight (brightness adjustable), making it convenient for work in dark places. ■ Accurately displays the depth and material of the target object. ■ Customizable for ease of use according to personal preferences. * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

【Features】 ■ Measurement data can be recorded on-site by the printer. ■ The measurement display and message display are separate, making it easy to read. ■ It has a built-in microcontroller, so operation is simple. ■ Equipped with a display hold function and automatic power-off function. * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

【Features】 By adopting a special circuit that responds only to chloride ions, it has high selectivity and is less susceptible to interference. The initial adjustment and measurement method is equipped with a built-in microcontroller, allowing for easy measurement without special skills or experience.

• Other environmental analysis equipment

Measurement method: Air meter method Measurement target: Fresh concrete *For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

■ Adopts a curved design that fits comfortably in the hand ■ Wide range from 1.5 to 10,000 r/min It has two modes: Low mode from 1.5 to 2,000.0 r/min and High mode from 15 to 10,000 r/min. The measurement unit for Low mode is 0.1 r/min, and for High mode, it is 1 r/min. ■ Dual-function type that can also measure peripheral speed By simply replacing the contact sensor with a disc-shaped peripheral speed ring, you can measure peripheral speed (m/min or mm/s). ■ Pocket for storing the peripheral speed ring To ensure you can measure peripheral speed at any time, one peripheral speed ring and one rotating contact sensor can be stored in the pocket inside the main unit. When using the peripheral speed ring, two rotating contact sensors can be stored. ■ Data hold function It automatically holds the final measurement value for about one minute, which is helpful for rechecking the measurement. ■ Battery replacement timing display To ensure accurate measurements at all times, it displays when the battery needs to be replaced. The "B" sign on the display indicates a low battery.

• Other environmental analysis equipment

【Features】 By using gravity molds, unlike conventional air meters, the molecular density of the special lightweight alloy is higher, eliminating air leakage from the material itself and resulting in a more beautiful surface.

• Other environmental analysis equipment

【Features】 ■ Easy to measure ■ Results can be checked in a short time ■ High precision of ±5kg/m3 ■ Water injection method that does not require leveling work ■ Uses a high-precision digital air meter (minimum reading value of 0.01%) ■ The initial pressure point of the air meter can be set arbitrarily between 95 and 120kPa

• Testing Equipment and Devices

【Features】 ■ Accurately measures by evaporating direct moisture ■ All measurements are performed automatically for easy operation, preventing personal errors and tampering ■ Significantly shortens drying time and allows for extended drying every minute to prevent insufficient drying ■ Can store records for 60 measurements on the internal hard disk and print all measurement results * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

【Features】 ■ Compact, lightweight, and easy to operate ■ Upper and lower limit alarm setting function ■ Capable of measuring temperature ■ Auto power-off function * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

【Features】 ■ Compact and lightweight ■ Adopts an electrical resistance method that minimizes the influence of unevenness, and is equipped with a conductive rubber sensor, allowing the sensor to closely adhere to uneven surfaces for improved accuracy. * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

【Features】 ■ The MC mode allows for moisture comparison of various objects. ■ Quick and easy checks can be performed by switching modes on the main unit. ■ With the optional deep electrode, measurements can be taken up to a depth of 100mm. * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

【Features】 ■ Can be measured easily and reliably with one hand ■ Equipped with a backlight ■ User memory creation function ■ In D mode measurement, moisture values and high-frequency capacitance can be displayed * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

■ Compact and lightweight body with a large LCD display ■ Capable of measuring in a wide range from 5 r/min to 10,000 r/min in 1 r/min increments (Hi range) ■ By switching to Lo range, it can measure from 0.5 r/min to 2,000.0 r/min in 0.1 r/min increments. ■ Convenient memory function for checking measurement results (can store up to 10 values) ■ Overrange display function that fixes the displayed value at the maximum when the measurement exceeds each range and shows the error mark "ERROR" ■ Two-in-one type that allows peripheral speed measurement by replacing the contact probe with the included peripheral speed ring ■ Final measurement value continues to be displayed for about 30 seconds after measurement is completed ■ Indicates when to replace the battery

• Other environmental analysis equipment

【Features】 ■ Measurement of various materials possible with a single dial ■ Alarm function that alerts with a buzzer when moisture exceeds the measurement value ■ Hold function that continuously displays the measurement value ■ Special moisture measurement for unique materials is possible using D.MODE ■ Temperature correction can be done automatically or manually via dial settings * For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment

■ The custom LCD display has increased in size by approximately 1.2 times, making the screen easier to see. ■ Rechargeable nickel-metal hydride batteries are available for use. ■ Comprehensive validation support features. ■ Energy-saving design. ■ Data memory function. ■ Approved model under the Measurement Law.

• Other environmental analysis equipment

■ Simultaneous analysis of 1/1 octave bands and 1/3 octave bands ■ Automatic analysis for each event using the trigger function ■ Built-in wideband white noise, pink noise, and 1/1 octave band noise (16Hz to 16kHz)

• Other environmental analysis equipment

■ The analysis results are displayed in frequency vs. level and time vs. level. The display of time variation allows for the estimation of reverberation time. ■ Instant data and stored data are displayed together, making it easy to see the level differences for each frequency band at a glance. ■ Memory is backed up by a battery. ■ Equipped with a pause function. ■ Equivalent noise levels and other measurements are automatically taken within a range of 1 to 59 seconds, 1 to 59 minutes, and 1 to 24 hours using an internal clock. ■ Warnings for out-of-measurement range include overload, underload, and low battery voltage alerts. ■ The trigger function automatically stores analysis results that exceed the set level. ■ Markers display the absolute values of any frequency band level. ■ In addition to noise levels, octave band analysis can be performed for equivalent noise levels, maximum values, and noise exposure levels. ■ A wide-range integration average type sound level meter with a measurement range of 50dB displays noise levels in numerical and bar graph form on a 55×55mm display area. ■ Up to 1500 screens of measurement, analysis, and calculation results can be stored. The storage cycle for noise levels can be set in 11 steps between 2ms and 10s.

• Noise Inspection

■ Equipped with a unique sensor that is less reactive to odorless gases and has excellent repeatability. ■ Measurement can be easily started with just base adjustment. ■ The "Peak Hold Function" displays the peak value (maximum value) of measurements, making it convenient for measuring fluctuating odor intensity. ■ Data accumulated in the device can be extracted to a computer using dedicated software (optional). ■ Designed with environmental considerations, it uses three AA alkaline batteries, one less than conventional models, providing a continuous usage time of 10 hours (at room temperature and humidity). ■ Weighing approximately 300g, it features a compact and lightweight design for easy portability.

• Other environmental analysis equipment

■ Compact and slim size that fits in your pocket It is a convenient compact and slim size for portability. ■ Uses red visible light, can measure any part of a rotating body The projection part uses a visible light type red LED. The projection state can be easily understood at a glance. Additionally, by simply sticking a reflection mark on the rotation axis, measurements can be quickly taken from any part of the rotating body. ■ Safety Measurements can be taken with the detection part and the reflective surface separated by 20 to 300 mm. ■ Data hold function The final measurement value is automatically held for about one minute, which is helpful for rechecking the measurement value. ■ 5-digit display measuring from 30 to 50,000 r/min The rotational measurement range is wide, from 30 to 50,000 r/min. Thanks to the 5-digit LCD display, it can be read at a glance. ■ Indicates when to replace the battery To ensure accurate measurements at all times, it indicates when to replace the battery. The "B" sign on the display indicates a low battery.

• Other environmental analysis equipment

【Features】 ■ Data transfer to a computer is possible. Data processing can be done with the included software. ■ Operation allows selection of language from five different languages.

• Other inspection equipment and devices