ソーキ List of Products and Services

From civil engineering and construction work to interior design and finishing work, you can easily level everything by yourself.

• Distance measuring device

From civil engineering and construction work to interior design and finishing work, you can easily level everything on your own.

• Distance measuring device

From civil engineering and construction work to interior design and finishing work, you can easily level everything by yourself.

• Distance measuring device

It complies with the needle penetration test method outlined in the Japan Society of Civil Engineers' "Guidelines for Investigation and Testing of Soft Rock." The main body is equipped with a correlation chart of needle penetration gradient [NP] (N/mm) and unconfined compressive strength (kN/m²), allowing for immediate determination of the unconfined compressive strength of soft rock and stabilized consolidated soil without sampling.

• Soil testing

The soil salinity meter PNT3000 uses stainless steel metal electrodes, allowing for easy insertion directly into the soil to measure the salinity concentration.

• Soil testing

This is an instrument for measuring soil hardness, which is one of the indicators representing the physicochemical properties of soil. A cone is pressed vertically into a flatly cut cross-section, and both the penetration depth and the corresponding soil reaction (spring compression) are simultaneously measured as variables, from which the theoretical value of hardness (kg/cm²) is calculated.

• Soil testing

This is a gas leak detector that detects gas leaks from city gas (13A), LPG, etc., and alerts you to gas leaks with a buzzer and lamp when it reaches a pre-set gas concentration, helping to prevent gas leak accidents. 【Features】 ■ Gas leaks can be detected with the push of a single switch ■ Low battery voltage, pump, and sensor are indicated by a lamp

• Odor Testing

You can measure alternating current while the power line is live, without disconnecting it. (This is an optional sensor for the Clamp Logger LR5051.)

• Other measurement, recording and measuring instruments

The electrical conductivity indicates how easily electricity passes through water, and the more electrolytes present in the water, the more current flows. 【Features】 ■ Electrical resistivity and salinity conversion display options available ■ General-purpose, high-functionality type

• Water quality testing

This is an anemometer that can measure the air volume of vents and intake openings in ceilings and walls.

• Wind Speed/Volume Meter

This is an analog type thickness gauge capable of measuring film thickness up to 5mm on a bare metal surface. It may also be referred to as a two-point or three-point contact method.

• Coating thickness gauge

This is an analog thickness gauge capable of measuring film thickness up to 15mm on a steel substrate.

• Coating thickness gauge

Applicable standard: JGS 1431 (Portable Cone Penetration Test Method, Standards (Draft) by the Japanese Geotechnical Society)

• Soil testing

This is a mud density meter for easily measuring the density of mud on-site. The measurement range is 1.00 to 2.30, with a minimum scale of 0.01.

• Soil testing

It can measure low-frequency sounds (1 to 500 Hz). It can measure low frequencies (1 to 100 Hz) that are difficult for humans to hear (or inaudible). 【Features】 - Equipped with G-weighting frequency characteristics and real-time analysis function for 1/3 octave bands. - Simultaneously measures low-frequency sound pressure levels (1 Hz to 100 Hz), G-weighted sound pressure levels, and 1/3 octave band levels (FLAT). - G-weighted frequency characteristics, RMS detection circuits, and 1/3 octave band filters utilize digital calculations via DSP. - Data can be imported to a computer through serial communication, allowing for editing in spreadsheet software.

• Vibration Testing

It emits low-frequency pulses and measures the time it takes for the pulse to travel from one transducer, through the test specimen, to the other transducer. It is applied in various diagnostics of concrete.

• Flaw detection testing

Typically, it uses an AC100V power supply, but it can also be used outdoors with the optional battery power adapter. 【Features】 ■Large, easy-to-read LCD display ■Count mode ■Percent mode ■Limit function

• Scale

In addition to standard weighing, it also features functions such as quantity setting and percentage setting. It can be used for purposes other than transaction proof for process management and research. 【Features】 ■ Quantity Setting By measuring the unit mass of the sample, it allows for quantity display (unit is PCS). The reference quantity for measuring the unit mass can be selected from 10, 20, 50, or 100, with greater quantities resulting in better accuracy. ■ Percentage Setting By setting the reference sample to 100%, it enables percentage display.

• Scale

In addition to standard weighing, it also features functions such as quantity setting and percentage setting. It can be used for purposes other than transaction proof for process management and research. 【Features】 ■ You can register the necessary mode from three types of modes: g (gram mode), PCS (piece mode), and % (percentage mode) for weighing. ■ Piece Mode By measuring the unit mass of the sample, it allows for quantity display (unit is PCS). ■ Percentage Mode By setting a reference sample to 100%, it allows for percentage display.

• Scale

It reduces the impact energy compared to a standard Schmidt hammer and estimates the compressive strength in the range of 5 to 30 N/mm².

• Flaw detection testing

The ultrasonic testing machine Panzit Lab can measure not only propagation time but also propagation speed, measurement length, and crack depth.

• Flaw detection testing

The thickness of the coating is measured by measuring the propagation time of ultrasonic waves. It is possible to measure even if the substrate is concrete, but measurements may not be possible due to conditions such as surface irregularities.

• Coating thickness gauge

It is an ultrasonic thickness gauge that can measure the thickness of homogeneous metals and non-metals that allow ultrasonic waves to pass through.

• Flaw detection testing

This is a machine that detects internal defects (voids, cracks, foreign objects) in metals using ultrasound. *The probe and probe cable are not included. Please prepare them yourself.

• Flaw detection testing

This is a machine that detects internal defects (voids, cracks, foreign objects) in metals using ultrasound. *The probe and probe cable are not included. Please prepare them yourself.

• Flaw detection testing

This is a machine that detects internal defects (voids, cracks, foreign objects) in metals using ultrasound. *The probe and probe cable are not included. Please prepare them yourself.

• Flaw detection testing

The ultrasonic sensor detects people and objects within the detection area and issues a voice warning from the speaker. At the same time, it alerts the operator with a rotating light. 【Features】 ■ Detection method: Ultrasonic reflection wave ■ Detection range ■ Distance: 5m ■ Vertical direction: 1.5m ■ Horizontal direction: 2.5m (varies depending on the surrounding environment)

• Other security and surveillance systems

When an obstacle enters the area set for the ultrasonic sensor, it issues a warning through an electronic sound to alert the driver. *Optionally, it can be used with a battery, without drawing power from the vehicle. ■ The ultrasonic sensor detects overhead structures and prevents collisions in advance. ■ The detection distance can be switched between three levels: 1m, 1.5m, and 2m. ■ Installation, removal, and angle adjustment of the ultrasonic sensor are easy. ■ The electronic sound is divided into three levels, allowing the type of sound to indicate the remaining distance when an obstacle enters the set detection range. ■ The controller comes with a magnet for easy attachment and detachment from the inside side of the basket. ■ In addition to sound, there is also an option for a rotating light.

• Other security and surveillance systems

This is an improved ultrasonic thickness gauge for measuring the thickness of castings. It can measure the thickness of castings made of iron, aluminum, and their products.

• Flaw detection testing

It can record surface changes caused by landslides and output an alarm if a change of 2mm or 4mm occurs within one hour. ■Alarm settings: 1-hour movement alarm switchable between 2mm/4mm.

• Other environmental analysis equipment

It is possible to record surface changes caused by landslides and output an alarm if a change of 2mm or 4mm occurs within one hour. ■Alarm Settings: 1-hour movement alarm switchable between 2mm/4mm.

• Other environmental analysis equipment

It is possible to measure four items: turbidity, color, residual chlorine, and transparency. The display, featuring a 3.5-inch color LCD, offers excellent visibility, and the displayed items can be set as desired. 【Features】 ■ Simultaneous measurement of turbidity and color in accordance with the Water Supply Act and drinking water testing methods ■ Equipped with a 3.5-inch LCD color display ■ Data can be saved to an SD card and displayed in Excel, etc. ■ Option to choose between one-shot measurement and real-time measurement ■ Compact and convenient for portability

• Water quality testing

It displays the noise level on a large digital display. It is easy to hold and reset the maximum value, making it ideal as a loudness meter. It can be used for events such as loud voice contests in neighborhoods or companies. 【Features】 ■Easy to operate ■Large digital display for easy visibility

• Vibration Testing

With a durable structure and robust IP66 protective casing, along with a newly developed shock-absorbing handle and receiver holder, it provides reliable performance even in harsh worksite environments. Additionally, by using it with an automatic tripod, complete solo operation can be achieved.

• Distance measuring device

A rigid loading plate with a diameter of 30 cm is installed on the target ground surface, and the load is applied in stages. From the loading weight at that time and the amount of ground settlement, the ultimate bearing capacity of the ground and the ground reaction coefficient can be determined.

• Soil testing

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

This is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

This is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Distance measuring device

It is an automatic level that accommodates various scenes from surveying to civil engineering and construction.

• Distance measuring device