スタッフ List of Products and Services

The "Conductive Hinge / Open-Close Hinge" is a hinge that not only has a free-stop function to hold the casing at any angle and a suction function but also possesses a conductive function. The resistance value is stable at 0.1Ω or less, even after durability testing. It features a multi-contact structure to prevent chattering and is developed with the intention of being used for grounding connections and signal lines. Since wiring is unnecessary, it offers various benefits such as eliminating concerns about disconnection due to opening and closing actions, optimizing space, and improving aesthetics. 【Features】 ■ Stable conductive function ■ Compact and highly durable *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Double Function Multi-Band Antenna" is a suitable mechanical component for laptops and foldable mobile phones. It features a hinge with antenna functionality, contributing to space-saving by combining two parts into one. The antenna characteristics support multi-band operation from 800MHz to 2GHz. Additionally, to ensure that the hinge function is not compromised and the antenna performance is maintained, we also propose installation and power supply methods. 【Features】 ■ Combination of hinge and antenna ■ Supports dual-band ■ Installation and power supply methods proposed ■ RoHS compliant *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• antenna

The "One-Touch Open Hinge" is a hinge that automatically opens the casing fully when the button located at the tip is released. It features a mechanism that allows the casing to open with a single push, while maintaining a size that is only about 13mm longer than a standard hinge. It can be used for foldable mobile phones and dual-screen smartphones. 【Features】 ■ Full open with one push ■ Compact ■ Suitable for applications such as foldable mobile phones *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

At Staff Corporation, we handle the "360° Rotating Flat Hinge." It moves while avoiding the rounded corners of the housing when opened, allowing the upper and lower housings to be flat in a fully open position, enabling the use of a foldable device like a tablet. By combining our unique conductive hinge with a hinge antenna, we contribute to space-saving and propose various usage methods. 【Features】 ■ Moves while avoiding the rounded corners of the housing when opened ■ Allows the upper and lower housings to be flat in a fully open position ■ Enables the use of a foldable device like a tablet ■ Proposes routing for cables and flex connecting the upper and lower housings ■ Safe to use in terms of conductivity *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

This product is a hinge for folding devices equipped with a flexible display. It adopts a link mechanism that connects two hinge axes, achieving stable operation. During the opening and closing actions, it traces a motion path that does not apply stress to the flexible display, preventing it from being pulled or wrinkled. It features a suction function in both closed and open states, as well as a free-stop function to hold the device at any desired opening angle. 【Features】 ■ Equipped with a flexible display ■ Hinge for folding devices ■ Designed to avoid stress on the flexible display ■ Capable of holding at any opening angle ■ Wiring is possible *For more details, please refer to the PDF document or feel free to contact us.

• LCD display
• Other electronic parts

The "hinge for laptops" allows users to freely adjust the angle of the display to maintain a comfortable viewing angle and working posture. It also enables the laptop to be folded compactly, making it convenient for transport and storage. Additionally, it features a "one-hand open" function that allows the laptop to be easily opened with one hand, even in situations where one hand is unavailable. 【Features】 ■ Achieves one-hand opening with a unique mechanism ■ Provides holding torque that withstands touch panel operations *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "small axis hinge" is an ultra-small flip hinge. It is a hinge used in remote controls for water heaters and toilets, capable of generating suction force near the fully closed and fully open positions. 【Features】 ■ Ultra-small and ultra-lightweight *For more details, please refer to the PDF document or feel free to contact us.*

• Other electronic parts

The "Grease-less High Torque Hinge" is a high torque grease-less hinge. Since it does not generate metal powder and does not use lubricants such as grease, it can be used in various environments. Additionally, it supports high torque, allowing heavy enclosures to be held at any desired angle. It employs a unique technology to prevent stick-slip, achieving smooth and seamless opening and closing actions. 【Features】 ■ Usable in various environments ■ High torque and high durability ■ Smooth and seamless opening and closing actions *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "hinges for large doors" utilize our expertise in spring design to provide stable torque and durability. Taking into account the moment of objects such as doors, they consistently generate appropriate torque in the closing direction. They can be used for applications such as commercial refrigerators, display cases, and doors for large electrical appliances. 【Features】 ■ Automatic closing ■ High torque ■ Stable durability *For more details, please refer to the PDF document or feel free to contact us.

• others

The "monitor hinge" allows the stand to follow the monitor's upright angle. It can hold the monitor at any desired upright angle, and even after tilting the monitor back, the stand will adjust to the monitor's upright angle when raised again. This eliminates the need to manually adjust the stand located at the back of the monitor. It can be used for TV monitors, medical monitors, and large monitors. 【Features】 ■ The stand follows the monitor's upright angle ■ No need to adjust the stand at the back ■ Usable for TV monitors and medical monitors, among others *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Rotating (Cycloid) Hinge" can perform rotational movements along an arbitrary trajectory, rather than the conventional rotation centered around an axis. This allows for rotation while avoiding interference with the housing and surrounding objects. To ensure strength, it is made of metal, but the surfaces where the metals rub against each other have been specially processed to achieve smooth operation and high durability. 【Features】 ■ Rotational movement along an arbitrary trajectory ■ Smooth operation and high durability ■ Enhanced conductivity and antenna performance ■ Various suggested applications *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Dual Rotation Monitor Hinge" allows the monitor to rotate along any desired trajectory, rather than the conventional rotation centered around an axis. When rotating on a desk, the traditional axis-centered structure requires the monitor to be slid upward before rotation to prevent interference. However, this product can draw any trajectory, enabling rotation in one action while avoiding interference. The monitor can rotate both clockwise and counterclockwise, providing users with various usage scenarios. It is suitable for applications such as TV monitors, medical monitors, and large monitors. 【Features】 ■ The monitor can rotate in both vertical and horizontal orientations. ■ Various usage scenarios can be provided to users. ■ The monitor can move to a designated position while drawing any trajectory. *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "swivel hinge" features two rotation axes, one vertical and one horizontal, allowing for dual-axis rotational movement. By combining it with our proprietary conductive hinge and hinge antenna, it contributes to space-saving and offers various usage suggestions. It is suitable for applications such as digital cameras, video cameras, and laptops. 【Features】 ■ Dual-axis rotational movement ■ Enhanced conductive and antenna performance ■ Well-suited for applications like digital cameras and video cameras *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Slide Hinge" is a hinge that allows for smooth sliding and high durability by applying resin to the surfaces that rub against each other. It is designed to be thinner and lighter while allowing for a greater sliding range. Additionally, we also propose the routing of cables and flex that connect the upper and lower housings, so you can use it with confidence regarding connectivity. 【Features】 ■ Thin, light, and allows for a large sliding range ■ Smooth and highly durable ■ Wiring considerations included ■ Proposal for routing cables and flex that connect the upper and lower housings *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Slide Flat Hinge" is a hinge that slides to move from a closed state, allowing the device to become flat like a tablet. We also propose the routing of cables and flex that connect the upper and lower housings, so you can use it with confidence regarding continuity. It is suitable for dual-screen mobile devices and dual-screen gaming consoles. 【Features】 ■ Can slide to become fully flat ■ Wiring considerations included ■ Proposals for routing cables and flex that connect the upper and lower housings *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Gear-Type Slide Hinge" is a hinge designed to be thinner and lighter while allowing for a greater sliding width. By applying resin to the surfaces that come into contact, it slides smoothly and has high durability. Additionally, we will also propose the routing of cables and flex that connect the upper and lower housings, so you can use it with confidence regarding connectivity. 【Features】 ■ Thin, light, and with a large sliding amount ■ Smooth and highly durable ■ Consideration for wiring ■ Proposal for routing cables and flex that connect the upper and lower housings *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "ball joint," like a standard ball joint, can move flexibly in all directions up to a certain angle. Additionally, it is designed with wiring considerations in mind, making it suitable for many electrical appliances. Moreover, it can be stopped at any desired angle, preventing disconnection due to rotational movement. 【Features】 ■ Flexible movement and consideration for wiring ■ Usable for many electrical appliances ■ Stops at any position ■ Designed to prevent disconnection due to rotational restrictions *For more details, please refer to the PDF document or feel free to contact us.

• joint

We do not have a catalog, but we have sent many antennas, hinges, and various other components into the world so far. With the rapid changes in the world, we will utilize new equipment and work hand in hand with our customers to create better products. We will also develop products that solve challenges that have not been addressed until now. By leveraging the high-frequency technology and precision mechanism technology we have cultivated, we will respond quickly and flexibly to the evolving voices of our customers regarding antenna hinges, terminals, and more. *For more details, please refer to the PDF materials or feel free to contact us.

• antenna

At Staff Corporation, we conduct considerations and prototypes tailored to our customers' requests from the planning stage, ultimately providing consistent support all the way to mass production. We always propose how to meet various customer needs, such as required specifications, shapes, quantities, schedules, and costs, while keeping the end user in mind. Additionally, after mass production, we will continue to offer proposals that lead to further cost reductions and value enhancements, such as VA and VE. *For more details, please refer to the PDF document or feel free to contact us.

• antenna

At Staff Corporation, we have provided a variety of products and parts to many customers both domestically and internationally. The products that have been proposed from the planning stage to mass production include over 1,000 achievements, including derivative products. Sometimes, projects may end at the planning stage, but without fearing that outcome, we listen to our customers' voices and make proposals from the upstream stages of development with the spirit of "let's try it." *For more details, please refer to the PDF materials or feel free to contact us.

• antenna

(We are currently suspending responses to inquiries via Ipros. Please contact us through our website. https://www.staf.co.jp/contact/) This product is a standard MIMO type external antenna for various IoT/M2M devices, compatible with 3G/LTE. Despite housing two antennas in a single compact case, our antenna technology minimizes mutual radio interference. (Refer to the PDF document) When installed on a metal surface, the antenna structure is designed to keep the antenna section away from the metal surface, minimizing the impact on antenna characteristics! With low-loss cables, it offers good antenna performance and can be used for wireless devices both indoors and outdoors. 【Features】 ■ Usable for various IoT/M2M devices - Supports 3G, LTE, 920MHz, etc. ■ Antennas can be installed in areas with good radio environments - Extremely low cable loss allows for routing the antenna to a clear line of sight ■ Waterproof/Dustproof - Complies with IP56, ensuring safe use outdoors Please check the registration status with the communication module before use.

• antenna

We received an inquiry from a major manufacturer regarding the consideration and development of a compact and lightweight millimeter-wave antenna for base stations that supports the 71-76GHz and 81-86GHz (E-Band) frequency bands, as well as the establishment of a system capable of supplying a substantial quantity. We anticipate that the demand for products compatible with the millimeter-wave frequency band will increase, so we promptly introduced the necessary equipment and developed and commercialized the product, sometimes seeking cooperation from external organizations. Ultimately, to accommodate mass production while keeping costs down, we successfully transitioned from producing waveguides through cutting and wire cutting to manufacturing them as metal molded products, thus meeting the customer's required costs and supply system. [Case Overview] ■ Issues - Consideration of a compact and lightweight millimeter-wave antenna for base stations - Desire to establish a system capable of supplying a substantial quantity ■ Results - Achieved the customer's required costs and supply system *For more details, please refer to the PDF document or feel free to contact us.

• antenna

We received a request from a major manufacturer to develop an antenna for millimeter-wave radar that is compatible with a new development IC. To achieve maximum gain performance within the requested size, we proposed and developed a vehicle-mounted millimeter-wave radar antenna tailored to the distance: a lens type for long-range applications and a patch type for short-range applications. Subsequently, this vehicle-mounted millimeter-wave radar was exhibited at an international trade show in early 2018, and our antenna was also displayed alongside it. [Case Summary] ■ Issues - We would like you to develop an antenna for millimeter-wave radar that is compatible with the new development IC. ■ Proposal - We proposed and developed a vehicle-mounted millimeter-wave radar antenna tailored to the distance: a lens type for long-range applications and a patch type for short-range applications. *For more details, please refer to the PDF document or feel free to contact us.

• antenna

1. Good antenna characteristics The antenna element has been optimized and designed for the 920MHz band and GNSS L1 (1575.42MHz). It boasts excellent antenna characteristics due to the use of low-loss cables. (Antenna radiation efficiency for 1019-076A: 922–928MHz: -4.1 to -4.5dB, 1575.42MHz: -2.6dB) The structure separates the antenna surface from the installation surface by approximately 30mm, reducing the impact of the installation surface in practical use. 2. Additional antenna certification for ELTRES communication module CXM1501GR The antenna has been additionally certified. It can be used immediately with ELTRES terminals. 3. Waterproof/Dustproof Designed for various indoor and outdoor applications and installations, it meets IP56 standards (excluding the connector part). It uses weather-resistant PC material (-30 to +90°C) and has a flame retardancy rating of V-0. 4. Supports various installation methods The main unit has mounting holes for screw fastening. It also supports the installation of adhesive tape (included). The GNSS cable is tagged to prevent installation errors during construction.

• antenna

The "magnetic charging cable" is a charging cable with a short-circuit prevention structure that only conducts electricity when attached. By using a round shape and magnets, it can be easily attached and detached by children and the elderly, even in dark places. Additionally, there is no concern about damage caused by twisting during attachment and detachment, which can occur with existing connectors. 【Features】 ■ Smooth attachment and detachment with magnets ■ No worry about damage from twisting during attachment and detachment with existing connectors ■ Short-circuit prevention structure that only conducts electricity when attached *For more details, please refer to the related link page or feel free to contact us.

• cable

The "Shock Sensor" is a sensor that functions simply by being fixed to a product (the object to be detected). It changes color in response to shock, allowing anyone to verify it on the spot. Additionally, because it employs a mechanical structure, it does not require electricity and operates even when the product's power is OFF. 【Features】 ■ Changes color in response to shock ■ Can be verified on the spot by anyone ■ Does not require electricity due to its mechanical structure ■ Functions even when the product's power is OFF ■ Works simply by being fixed to the product (the object to be detected) *For more details, please refer to the related link page or feel free to contact us.

• Sensors

The "Compact Current Sensor" is designed to be small, thin, and lightweight, achieving space-saving installation. It can be held in place where it is attached to the wire and can be easily installed and removed with a single touch. It can be used in combination with measuring instruments to measure the power consumption of electrical devices. 【Features】 ■ Compact, thin, and lightweight ■ Achieves space-saving installation ■ Can be easily attached and removed from the wire with a single touch ■ Can be held in place where it is attached to the wire *For more details, please refer to the related link page or feel free to contact us.

• Sensors

The "BtoB connector" eliminates the need for coaxial cable routing, thereby enhancing the freedom of circuit design and allowing for a simpler circuit configuration. It can be easily verified by just crimping, which improves evaluation, feasibility, and productivity, making it easy to handle. Additionally, since cables are unnecessary, it contributes to weight reduction, space-saving, and simplification of assembly. 【Features】 ■ Crimp connection ■ Simplification of circuit design ■ Lightweight, space-saving, and easy assembly ■ Compatible with SMT (Surface Mount Technology) and reflow *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• connector

The "Cordless Phone Antenna" is an antenna that allows for the orientation (rotation direction) to be set as desired after installation. The connector uses U.FL/H.FL and can be easily attached to the circuit board with a single touch. Additionally, we can customize the color tone, operational specifications, installation specifications, and more to match your device. 【Features】 ■ Customizable to match your device ■ Orientation (rotation direction) of the antenna can be set as desired after installation ■ Connector uses U.FL/H.FL and can be easily attached to the circuit board *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "1901-001A" is a bracket designed for our standard external antennas. It can be used in conjunction with extension and conversion cables. Additionally, it can be used as a ground (GND). It is suitable for devices that do not have a place to install an external antenna or when the signal is weak and you want to extend the antenna. 【Features】 ■ Compatible with our standard external antennas ■ Can be used with extension and conversion cables ■ Usable as a ground (GND) *For more details, please refer to the related link page or feel free to contact us.

• bracket

The "Wideband Multi-Frequency Antenna" is an antenna that supports the 700MHz band. The installation method can be adapted to meet your needs, achieving a wideband VSWR for both Low Band and High Band. It can be used for applications such as wireless devices and evaluation antennas worldwide. 【Features】 ■ Antenna that supports the 700MHz band ■ Can also accommodate frequencies from 699MHz ■ Achieves a wideband VSWR for Low Band and High Band ■ Installation method can be adapted to meet your needs *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Wideband Multi-Frequency Vehicle Antenna" is an antenna designed for vehicles, featuring waterproof and wind-resistant design. It can be tilted to any angle for evaluation purposes, and the height from the vehicle body can be adjusted. It can be used for applications such as LTE field testing (vehicle-mounted compatible). 【Features】 ■ Waterproof and wind-resistant design for vehicle use ■ The antenna can be tilted to any angle for evaluation purposes, and the height from the vehicle body can be adjusted *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "LTE_3G External Antenna" supports five frequencies with just one unit. It ensures performance across multiple frequency bands such as the 800MHz band, 900MHz band, GSM 1.8GHz band, GSM 1.9GHz band, and 2GHz band. Even when installed on a metal surface, it experiences minimal degradation in characteristics, and it is usable for LPWA as it also covers the 920MHz band. 【Features】 ■ Supports five frequencies with one unit ■ Minimal degradation in characteristics even when installed on a metal surface ■ Designed for screw mounting and double-sided tape fixation ■ Usable for LPWA as it covers the 920MHz band *For more details, please refer to the related link page or feel free to contact us.

• antenna

Our company manufactures a wide variety of "wireless communication antennas." We provide high-performance antennas tailored to your needs across various frequency bands and communication methods, including 5G Sub6, millimeter waves, 4G/LTE, 920MHz band (LPWA), Wi-Fi, and NFC, from standard products to custom designs. Our standard antennas are registered with technical compliance for many major communication module manufacturers, so compatible products are readily available for use. With a proven track record of over 100 million mobile phones, we possess numerous facilities necessary for antenna design, such as anechoic chambers and electromagnetic field simulators. We are committed to fully supporting you with our meticulous response capabilities, having mass-produced over 1,000 custom products! *Please refer to the PDF document for our product lineup.

• antenna

The "terrestrial DTV antenna" can rotate and move in all directions to match the reception environment, allowing for optimal signal reception. To ensure antenna characteristics in the frequency bands used for terrestrial television and lower frequency bands, a certain length of the antenna is necessary. Since the start of terrestrial digital broadcasting, our company has developed an antenna that can be made thinner and shorter when stored, to fit the space of devices. 【Features】 ■ Thinner and shorter when stored ■ Direction adjustment possible to match the reception environment *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "920MHz patch antenna" has achieved miniaturization and high gain. The operating frequency is 915 to 928 MHz, and the type is a patch planar antenna. Additionally, the external dimensions are L150 x W150 x T (25) mm. It can be used for RFID applications and IoT/M2M devices. 【Features】 ■ Miniaturization ■ High gain *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Multi-Frequency Built-in Antenna II" can be used for smartphones/mobile phones, as well as tablet devices and small gaming consoles. It allows for the consolidation of multiple required antennas into one, contributing to space-saving. Additionally, it significantly helps in cost reduction. It ensures performance characteristics for multiple frequency bands, including 800MHz (900MHz), 1.5GHz, 1.8GHz, 1.9GHz, and 2GHz, all within a single antenna. 【Features】 ■ Supports multiple frequencies ■ Ensures performance characteristics of multiple frequency bands with one antenna ■ Contributes to space-saving ■ Significantly aids in cost reduction *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Multi-Frequency Built-in Antenna I" supports multiple frequencies. It ensures performance characteristics for various frequency bands, including the 800MHz band, 900MHz band, GPS band, GSM 1.8GHz band, GSM 1.9GHz band, 2GHz band, 2.4GHz band, and 5GHz band, all in one antenna. By consolidating multiple antennas into one, it contributes to space-saving and significantly reduces costs. 【Features】 ■ Supports multiple frequencies ■ Ensures performance characteristics for multiple frequency bands in one antenna ■ Contributes to space-saving ■ Significantly reduces costs *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Millimeter Wave Band Sensor Antenna (Horn + Lens)" achieves high-precision detection compared to conventional sensors such as infrared by utilizing millimeter waves. It operates in the millimeter wave frequency bands of 24GHz, 60GHz, and 70GHz. Through electromagnetic field simulation, we propose optimal lens shapes tailored to your desired distance, achieving high-precision sensing in a compact size of approximately 50mm (vertical) × 50mm (horizontal). 【Features】 ■ Combines lens and horn to achieve high precision and miniaturization ■ Utilizes millimeter wave frequency bands of 24GHz, 60GHz, and 70GHz ■ Compact and high gain ■ Realizes high-precision sensing *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "High-Capacity High-Speed Wireless Transmission E-band Cassegrain Type" has successfully manufactured a waveguide, which plays a very important role in antenna characteristics, using metal forming. By repeatedly conducting electromagnetic field simulations and actual measurements, we have achieved mass production of a compact parabolic antenna compatible with the E-Band (70G/80G). While conventional E-Band products weighed about 7 kg, we have reduced the weight to approximately 1.6 kg, making installation in high or narrow spaces easier. 【Features】 ■ Achieved mass production of a compact parabolic antenna ■ Reduced weight to approximately 1.6 kg, facilitating installation in high or narrow spaces ■ Successfully manufactured the waveguide using metal forming (molds) ■ Cost-effective, enabling mass production ■ Control of detection range *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Lens + Patch for Vehicle-Mounted Radar (Long Range) in the 76-77GHz Band" is an antenna that can detect with high precision even at long distances by utilizing a lens shape. It uses the millimeter wave band from 76GHz to 81GHz. By utilizing electromagnetic field simulation, we can propose an optimal lens shape tailored to your desired distance. 【Features】 ■ Achieves high-precision detection over long distances ■ Utilizes the millimeter wave band from 76GHz to 81GHz ■ Employs electromagnetic field simulation ■ Proposes an optimal lens shape according to your desired distance *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "transparent film antenna" can be flexibly bent, allowing it to be attached to curved shapes and surfaces. Unlike conventional FPCs, where the antenna pattern is inevitably visible, this product has a special manufacturing method that makes the antenna pattern almost invisible. Additionally, because it uses highly transparent materials, it can be applied to visible areas without compromising aesthetics or obstructing the field of view. 【Features】 ■ Antenna pattern is not visible ■ Uses highly transparent materials ■ Does not compromise aesthetics or obstruct the field of view ■ Can be flexibly bent ■ Can be attached to curved shapes and surfaces *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Conversion and Extension Cable" can convert an SMA-BJ connector to SMA-P, MHF, and MS-156C connectors. The extension cable is made from low-loss materials. It can be used in various applications, including vending machines, equipment covered in metal, and areas with weak signals. 【Features】 ■ Converts SMA-BJ connector to SMA-P, MHF, and MS-156C connectors ■ Extension cable is made from low-loss materials *For more details, please refer to the related link page or feel free to contact us.

• antenna
• cable
• Other cable related products

The "Standard Wi-Fi/BLE/Bt External Antenna" is designed for outdoor use and is made of weather-resistant ASA material. It complies with flame-retardant grade V0. With an IP67 rating, it can be safely used outdoors. Additionally, due to its 1/2 wavelength design, good characteristics can be achieved with the antenna alone. 【Features】 ■ Good characteristics can be achieved with the antenna alone due to its 1/2 wavelength design ■ Made of weather-resistant ASA material for outdoor use ■ Complies with flame-retardant grade V0 ■ Safe for outdoor use with an IP67 rating *For more details, please refer to the related link page or feel free to contact us.

• antenna

The "Standard Wi-Fi Dual λ/2 External Antenna" provides good characteristics due to its 1/2 wavelength design. It is safe to use outdoors as it is IP67 rated. Designed for outdoor use, it is made of weather-resistant ASA material and complies with flame retardant grade V0. 【Features】 ■ Good characteristics achieved with the antenna alone due to the 1/2 wavelength design ■ Made of weather-resistant ASA material for outdoor use ■ Complies with flame retardant grade V0 ■ Safe for outdoor use due to IP67 rating *For more details, please refer to the related link page or feel free to contact us.

• antenna