芙蓉ビデオエイジェンシー List of Products and Services

The "ALH201A" is a 16-port HUB device compatible with ARC NET LAN, designed for 1U rack mounting. The power supply supports redundancy. The combination of ports can be set using a rotary switch in increments of 4 ports (up to a maximum of 4x4=16 ports). If there is no 75Ω termination, it may cause network reconstruction, so please terminate the cable with 75Ω on the ports where cables are connected without nodes. 【Features】 ■ 1U rack mount specification compatible with ARC NET LAN ■ Power supply supports redundancy ■ Communication speed (2.5Mbps/10Mbps) can be set using DIP switches ■ The HUB controller has a built-in PLL circuit, allowing for LAN signals with minimal jitter accumulation due to an increase in the number of nodes *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "ALH101M" is a 4-port HUB device compatible with ARC NET LAN that can be installed with four units in a 1U rack mount. The communication speed (2.5Mbps/10Mbps) can be set using JP1 and JP2. Since the HUB controller has a built-in PLL circuit, it provides LAN signals with minimal jitter accumulation due to an increase in the number of nodes. 【Features】 ■ The HUB controller has a built-in PLL circuit, allowing for LAN signals with minimal jitter accumulation due to an increase in the number of nodes. ■ The communication speed (2.5Mbps/10Mbps) can be set using JP1 and JP2. ■ ARCNET distribution. ■ 1U 1/4 size. ■ AC/DC adapter. *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "RCP3700A" is an assign panel that switches the crosspoints of the MTX switcher in a control system built with ARCNET/ETHERNET. Its dimensions are W:425(482)mm H:43.7mm D:80mm, and it allows for the assignment of any material and control bus to 16 buttons. Additionally, it is equipped with an LCD that can display up to 8 characters for material names, etc. 【Features】 ■ Allows assignment of any material and control bus to 16 buttons ■ Assignments can be set not only on the main unit but also via PC ■ The INH button can be pressed to prohibit selection via the panel ■ Display of device names ■ AC/DC adapter *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "RCP3115A" is a 16-button assign box device that switches the crosspoints of an MTX switcher in a control system built on ARCNET/ETHERNET (POE compatible). It complies with the ETHERNET (POE compatible) IEEE802.3a standard, supporting full-duplex communication and auto-negotiation. You can assign any material or control bus to the 16 buttons. 【Features】 ■ Complies with ETHERNET (POE compatible) IEEE802.3a standard ■ Allows assignment of any material or control bus to the 16 buttons ■ Supports full-duplex communication and auto-negotiation ■ Equipped with an LCD that can display material names and other information up to 8 characters ■ Assignments can be set not only on the device itself but also from a PC *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "RCP3600A" is an assignment panel that switches the crosspoints of the MTX switcher in a control system built on ARCNET/ETHERNET. Bus control is possible with the upper buttons, and material switching can be done with the lower buttons. It can control up to 32 buses. Additionally, by pressing the INH button, selection via the panel can be prohibited. 【Features】 ■ Bus control with the upper buttons and material switching with the lower buttons ■ Control of up to 32 buses ■ Equipped with an LCD that can display material names and other information up to 8 characters ■ Assignments can be set not only on the main unit but also from a PC *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "RCP3100A" is a 16-button assign panel that switches the crosspoints of an MTX switcher in a control system built on ARCNET/ETHERNET. It features an LCD that can display material names and other information up to 8 characters. Assignments can be set not only on the unit itself but also via a PC. It can control up to 12 buses. 【Features】 ■ Capable of controlling up to 12 buses ■ Control system built on ARCNET/ETHERNET ■ Switches the crosspoints of the MTX switcher ■ The INH button can be pressed to prohibit selection via the panel *For more details, please refer to the PDF materials or feel free to contact us.

• Other image-related equipment

The "RCP3000A" is an 8-button assign panel that switches the crosspoints of an MTX switcher in a control system built on ARCNET/ETHERNET. It can control up to 4 buses and is equipped with an LCD that can display material names and other information with a maximum of 8 characters. Assignments can be configured not only on the unit itself but also from a PC. 【Features】 ■ Capable of controlling up to 4 buses ■ Equipped with an LCD that can display material names and other information with a maximum of 8 characters ■ Assignments can be configured both on the unit and from a PC ■ The INH button can be pressed to prohibit selection via the panel *For more details, please refer to the PDF documentation or feel free to contact us.

• Other image-related equipment

The "RCP2301" is a remote panel that switches the crosspoints of the MTX switcher in a control system built on ARCNET/ETHERNET. It allows the selection of one output from all output rows for each input row. The search for control target input/output materials can be operated using either the up/down switches or the 10-key. 【Features】 ■ Allows the selection of one output from all output rows for each input row ■ The search for control target input/output materials can be operated using either the up/down switches or the 10-key ■ Input materials can be assigned to the crosspoint switching buttons ■ Control system built on ARCNET/ETHERNET ■ Display of device names *For more details, please refer to the PDF materials or feel free to contact us.

• Other image-related equipment

The "RCP2200" is a 16-button assign panel that switches the crosspoints of an MTX switcher in a control system built on ARCNET/ETHERNET. It can display input material names and BUS names in color, with display colors provided by backlight LEDs (red, blue, green) allowing for 64 colors. Additionally, the displayable characters include half-width alphanumeric, half-width katakana, and full-width (JIS Level 1 and 2), with character limits of 8 half-width characters or 4 full-width characters for single-line display, and 16 half-width characters for double-line display. 【Features】 ■ Allows assignment of input materials to crosspoint switch buttons ■ Displays input material names and BUS names in color ■ Displayable characters: half-width alphanumeric, half-width katakana, full-width (JIS Level 1 and 2) ■ Display colors: 64 colors using backlight LEDs (red, blue, green) ■ Character limits: single-line display (8 half-width characters, 4 full-width characters), double-line display (16 half-width characters) *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "RCP320A" is a routing switcher control panel with 32 fixed buttons. The dimensions are W: 431.4 (482) mm H: 39.7 mm D: 98.7 mm (excluding protrusions). The button assignments for output and input can be changed according to usage. Additionally, control can be selected from serial control (RS232C), ARCNET, or Ethernet. 【Features】 ■ Ethernet control ■ ARCNET control ■ AC/DC adapter ■ Ability to change button assignments for output and input according to usage ■ The INH button can be pressed to prohibit selection via the panel *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The RCP310A is a routing switcher control panel with 16 fixed buttons. The power input is DC12V ±10%, and the power consumption is below DC12V 0.2A. Control can be selected from serial control (RS232C), ARCNET, or Ethernet. Depending on the application, the button assignments for output and input can be changed. 【Features】 ■ The INH button can be pressed to prohibit selection via the panel. ■ Control can be selected from serial control (RS232C), ARCNET, or Ethernet. - RS232C/RS422: 9600/38400bps (internal switching) D-SUB 9P female - ETHERNET: 10Base-T/100Base-TX 10Mbps/100Mbps RJ-45 - ARCNET: 75Ω BNC RS485 2.5Mbps/10Mbps * For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "RCP300A" is a routing switcher control panel with 8 fixed buttons. Depending on the application, the assignment of output and input buttons can be changed. Additionally, control can be selected from serial control (RS232C), ARCNET, or Ethernet. By pressing the INH button, you can disable selection via the panel. 【Features】 ■ The assignment of output and input buttons can be changed depending on the application. ■ Control can be selected from serial control (RS232C), ARCNET, or Ethernet. ■ Pressing the INH button allows you to disable selection via the panel. *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "DSR9376A" is a routing switcher designed for switching HD-SDI and 3G-SDI signals, equipped with AVDL. It has a maximum of 8 input channels and 4 output channels, and switching is performed in synchronization with the reference signal. The power supply unit is configured in a redundant setup, ensuring that operations are not affected even if one power supply unit fails. 【Features】 ■ Input phase pulling for 5H buffer and 1H buffer is possible ■ Maximum of 8 input channels and 4 output channels ■ Switching is performed in synchronization with the reference signal ■ Power supply unit is configured in a redundant setup ■ Operations are not affected even if one power supply unit fails *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "DSR9360" is a 256x256 digital video routing switcher that switches SDI video signals. Each INPUT/OUTPUT unit consists of 16 inputs and 16 outputs, and with a maximum of 16 additional units, a 256x256 matrix configuration is possible. Preset settings during system operation can be easily configured using a PC application. 【Features】 ■ Setting for prohibited input materials ■ Configuration of switcher switching points ■ Configurable for each output bus ■ Alarm monitoring available via NMP ■ Equipped with contact output alarms *For more details, please refer to the PDF materials or feel free to contact us.

• Other image-related equipment

The "DSR9040" is a 72x72 digital serial routing switcher compatible with 3G/HD/SD-SDI signals. The signal formats comply with the SMPTE 424 (3G), SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI) bit-serial interface standards. When using this product, it is essential to supply power from the "PSU1100." 【Features】 ■ Short depth allows for mounting at the back of a rack ■ Alarms are indicated by LED display and output contacts from the rear of the unit ■ External control can be done via serial control (RS232C/RS422) or Ethernet ■ Serial control is set at the factory ■ Compatible with 3G/HD/SD-SDI signals *For more details, please refer to the PDF documentation or feel free to contact us.

• Other image-related equipment

The "DSR9030" is a 32x32 digital serial routing switcher compatible with 3G/HD/SD-SDI signals. Due to its short depth, it can be mounted at the back of a rack. Additionally, alarms are output via LED display and contact Ethernet from the rear of the unit. The power supply is configured with redundancy, ensuring that operations are not disrupted even if one power supply fails. 【Features】 - The signal formats comply with SMPTE 424 (3G), SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI) bit-serial interface standards. - It has 32 channels for input and 32 channels for output, switching during the V blanking period of the reference signal. - The reference signal can accept either an NTSC black burst signal or a high-definition three-value sync signal. *For more details, please refer to the PDF documentation or feel free to contact us.

• Other image-related equipment

The DSR2616 is a 16x16 digital serial routing switcher that supports HD/SD-SDI signals as well as DVB-ASI signals. External control can be performed via serial control (RS232C/RS422), ETHERNET, ARCNET LAN, or parallel control. The signal formats comply with the BTA S-004B (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI) bit-serial interface standards. 【Features】 - It has 16 channels for input and 16 channels for output, switching in sync with the reference signal. - The reference signal can accept either NTSC black burst signals or high-definition three-value sync signals. - A manual panel is standardly implemented on the front of the device. - Local control of the router can be performed independently. - The power supply unit has a redundant configuration. *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The "DSR1808" is an 8x8 digital serial routing switcher that supports HD/SD-SDI signals as well as DVB-ASI signals. It has 8 channels for input and 8 channels for output, and it switches in synchronization with the reference signal. The reference signal can accept either NTSC black burst signals or high-definition three-value sync signals. 【Features】 ■ The signal formats comply with the bit-serial interface standards of SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI). ■ External control is possible via serial (RS232C/RS422), ETHERNET, ARCNET LAN, and parallel control. ■ A manual panel is standardly implemented on the front of the device, allowing for local control of the router independently. *For more details, please refer to the PDF materials or feel free to contact us.

• Other image-related equipment

The "DSR9300" is a 4x4 digital serial routing switcher that supports HD/SD-SDI signals as well as DVB-ASI signals. The signal formats comply with the bit-serial interface standards of SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI). It has 4 channels for input and 4 channels for output, and it switches during the V blanking period of the reference signal. 【Features】 ■ The reference signal can accept either NTSC black burst signals or high-definition three-value sync signals. ■ External control is possible via serial control (RS232C/RS422) or Ethernet. ■ Serial control is set at the factory. ■ A manual panel is standardly implemented on the front of the device. ■ Local control of the routing switcher can be performed independently. *For more details, please refer to the PDF documentation or feel free to contact us.

• Other image-related equipment

This device is a serial digital switcher designed for selecting between HD/SD-SDI signals and DVI-ASI signals. Each input is equipped with an active through output, allowing it to be used as a monitor output for input materials. 【Features】 ■ Two types available: 2:1 dual-channel switching type "DSW0202A" and 2:1 single-channel type "DSW0202B" ■ 1U half-size ■ Input serial cable compensation for HD-SDI 100m/SD-SDI 100m *For more details, please refer to the PDF materials or feel free to contact us.

• switch

This device is a 4:1 direct switcher that can select and switch between 4-input 3G/HD/SD-SDI signals. It is equipped with an INHIBIT function, allowing external control from the switch on the front panel or the REMOTE connector on the rear panel. 【Features】 ■ The INHIBIT function allows you to disable input switching control from the front panel for each system by turning ON the INH switch on the front panel. ■ Equipped with reclocking function. ■ Input cable compensation: 3G-SDI 100m / HD-SDI 100m / SD-SDI 300m * For more details, please refer to the PDF document or feel free to contact us.

• switch

This device is a 4:1 direct switcher that can select and switch between 4-input 3G/HD/SD-SDI signals. External control is possible from the switch on the front panel of the main unit or from the REMOTE connector on the rear panel. When the power is OFF, it bypasses input 1 and output 1. 【Features】 ■ Equipped with INHIBIT function ■ By turning ON the INH switch on the front panel, it is possible to prohibit input switching control from the front panel for each system. *For more details, please refer to the PDF document or feel free to contact us.

• switch

This device is an 8:1 direct switcher that can select and switch between 8 inputs of 3G/HD/SD-SDI signals. Control can be done via the switches on the front panel of the main unit or through the REMOTE connector on the rear panel. It is equipped with an INHIBIT function, allowing you to disable input switching control from the front panel for each channel by turning ON the INH switch on the front panel. 【Features】 ■ Equipped with reclocking function ■ Input cable compensation: 3G-SDI 100m / HD-SDI 100m / SD-SDI 300m *For more details, please refer to the PDF document or feel free to contact us.

• switch

The "DSW081NRB" is an 8:1 direct switcher compatible with 3G-SDI. Its dimensions are W: 210mm, H: 42mm, D: 300mm (excluding protrusions), and it can select and switch between 8 inputs of 3G/HD/SD-SDI signals. When the power is OFF, it bypasses input 1 and output 1. 【Features】 ■ External control from the switch on the front panel or the REMOTE connector on the rear panel ■ Equipped with INHIBIT function ■ By turning ON the INH switch on the front panel, it is possible to prohibit input switching control from the front panel for each system. *For more details, please refer to the PDF document or feel free to contact us.

• switch

The "DSW082A" is an 8:2 direct switcher. It selects and switches 8 inputs of HD/SD-SDI signals. It features a reclock function and input cable compensation. Control can be done via the switch on the front panel or from the REMOTE connector on the rear panel. 【Features】 ■ Select and output HD/SD-SDI signals from 8 inputs by system ■ Equipped with INHIBIT function ■ By turning ON the INH switch on the front panel, it is possible to prohibit input switching control from the front panel for each system ■ Equipped with reclock function ■ Input cable compensation: HD-SDI 100m/SD-SDI 100m *For more details, please refer to the PDF document or feel free to contact us.

• switch

The "DSW161B" is a 16:1 direct switcher compatible with 3G-SDI. It allows you to select and switch one input from 16 inputs of 3G/HD/SD-SDI video signals. Control can be done via the switch on the front panel, the REMOTE connector on the rear panel, or through an external control using the serial communication connector (RS232C/RS422). 【Features】 ■ Select and switch one input from 16 inputs of 3G/HD/SD-SDI video signals ■ Equipped with an INHIBIT function that allows you to disable input switching control from the front panel by turning ON the INH switch on the front panel ■ Includes a reclock function ■ Can retain the switching point at power-up as the setting during power interruption (resume function) *For more details, please refer to the PDF document or feel free to contact us.

• switch

The "UGBS100Q" is a gearbox that supports 12G-SDI and Quad Link 3G-SDI signals. It allows for mutual conversion between Quad Link 3G-SDI and 12G-SDI (however, only 2SI). It is equipped with a reclock function, and the power supply voltage is DC input at DC+12V ±10% and AC adapter at AC100V ±10%. 【Features】 ■ Equipped with reclock function ■ Mutual conversion between Quad Link 3G-SDI and 12G-SDI is possible (however, only 2SI) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The UGBS144Q is a direct switcher compatible with 12G-SDI, 3G-SDI, and HD-SDI signals. It has 4 channels for input and 4 channels for output. The power consumption is DC +12V 1.8A for DC input and 50VA for the AC adapter. Additionally, it features a reclock function, allowing for local control of the unit via the front panel switch. 【Features】 ■ Equipped with reclock function ■ 4 channels for input and 4 channels for output ■ Local control of the unit via the front panel switch *For more details, please refer to the PDF document or feel free to contact us.

• Switching Power Supply

The "UDDA104Q/UDDA108Q" is a signal distribution device compatible with 12G-SDI, 3G-SDI, HD-SDI, and SD-SDI signals. The UDDA104Q has 1 input and 4 outputs, while the UDDA108Q has 1 input and 8 outputs. The operating temperature ranges from 0°C to +40°C. Additionally, it features a reclocking function, with dimensions of W105mm × H38mm × D200mm and a weight of 0.8kg. 【Features】 ■ UDDA104Q: 1 input, 4 outputs ■ UDDA108Q: 1 input, 8 outputs ■ Equipped with a reclocking function *For more details, please refer to the PDF document or feel free to contact us.

• others

The "UDSR1616A" is a multi-rate serial routing switcher that supports 12G-SDI, 3G-SDI, and HD-SDI signals. The alarm features LED display and contact output from the rear. It also supports SNMP. The power supply unit has a redundant configuration, including the AC line, allowing operation even if one of the power supply units fails, and external control via Ethernet is possible. 【Features】 ■ The alarm features LED display and contact output from the rear ■ Supports SNMP ■ External control via Ethernet is possible ■ It has 16 channels for input and 16 channels for output, allowing switching synchronized with the reference signal *For more details, please refer to the PDF document or feel free to contact us.

• Switching Power Supply

The "UDSR0808A" is a multi-rate serial routing switcher that supports 12G-SDI, 3G-SDI, and HD-SDI signals. Local control of the unit can be performed using the front panel switch, allowing standalone operation. It has 8 channels for input and 8 channels for output, and switching can be synchronized with the reference signal. Additionally, the power supply unit is configured with redundancy, including the AC line, so operation is possible even if one of the power supply units fails. 【Features】 ■ External control via Ethernet is possible ■ Local control of the unit can be performed using the front panel switch ■ Alarms are indicated by LED display and contact output from the rear ■ SNMP compatible *For more details, please refer to the PDF document or feel free to contact us.

• Switching Power Supply

The "ADA142T" is a 1-input/4-output analog audio signal distribution amplifier board designed to be mounted on the MPF2000 shelf. It uses Phoenix Contact connectors (MC1.5/10-GF-3.5) for input and output. Level adjustment can be easily made on the front panel of the unit. Additionally, due to its transformerless design, it offers a wide dynamic range, low distortion, and low noise. The output level can be roughly adjusted in six steps using internal jumper pins. 【Features】 ■ Easy level adjustment on the front panel of the unit ■ Output level can be roughly adjusted in six steps using internal jumper pins ■ Wide dynamic range due to transformerless design, achieving low distortion and low noise ■ Uses Phoenix Contact connectors (MC1.5/10-GF-3.5) for input and output *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VDA161T" is a distribution amplifier board for NTSC video signals with 1 input (loop-through) and 6 outputs (75Ω), designed to be mounted in the MPF2000 rack. Level and equalization adjustments are easy to make on the front of the unit. The signal input supports loop-through. Additionally, by using 5C2V coaxial cable, approximately 300 meters of cable compensation is possible. 【Features】 ■ Easy level and equalization adjustments on the front of the unit ■ Signal input supports loop-through ■ Front EQ volume allows for compensation of approximately 300 meters of cable loss with 5C2V coaxial cable *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MPF2000" is a multi-shelf (2U rack mount size) developed for analog video distribution and analog audio signal distribution, aimed at facilitating system construction. It supports the installation of up to 10 units. Since there are no designated installation locations for the units, flexible system construction is possible. Additionally, there are two power slots with individual AC inputs, providing two types: VIDEO 5V and AUDIO 24V, which can be operated either individually or in redundancy (parallel operation). 【Features】 ■ Up to 10 units can be installed in a 2U rack mount ■ Two power slots with individual AC inputs ■ Rear FAN adopts a detachable method ■ Two types available: VIDEO 5V and AUDIO 24V, which can be operated individually or in redundancy (parallel operation) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MOB101A" is a device that receives and decodes the compressed signal IP for monitoring the IP-GATEWAY unit (IPG20x) implemented in the IPG3000 or IPG2000 shelf. It supports uncompressed audio (LPCM) with up to 16 channels output. Ancillary data is superimposed and output at the same SDI line position as the transmitting side (4 lines). Additionally, video output selection can be performed from the front panel or Ethernet port, and it is equipped with 4 SDI output channels. 【Features】 ■ Equipped with 4 SDI output channels ■ Separated video is expanded using TICO ■ Supports uncompressed audio (LPCM) with up to 16 channels output ■ Video output is in SDI format (HD-SDI), with a video format of 1080/59.94i *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MOB100A" is a device that receives and decodes the compressed signal IP for monitoring the IP-GATEWAY unit (IPG20x) implemented in the IPG3000 shelf or IPG2000 shelf. Depending on the settings, it receives a specific 1GbE IP stream (SMPTE2022-1/2), converts it to an SDI signal, and outputs it. The video output is in SDI format (HD-SDI), and the video format supports 1080/59.94i. Additionally, the selection of output video can be done from the front panel or via the Ethernet port. 【Features】 ■ The received 1GbE (IEEE 802.3ab) IP stream format is SMPTE2022-1/2 ■ The separated video is expanded using TICO ■ Uncompressed audio (LPCM) supports up to 16 channels output ■ Equipped with 1 SDI output and 1 DisplayPort output *For more details, please refer to the PDF documentation or feel free to contact us.

• others

The "IPG205X/IPG208X" is a unit designed for the IPG3000 or IPG2000 shelves, serving as an SDI-10GbE Ethernet converter equipped with both uncompressed and compressed systems for base stations. It features an implementation of a compression system with encoding capabilities for monitoring, compressing the input SDI signal's video using TICO, and converting it into a TS signal along with audio (uncompressed) and ancillary data, which is then multiplexed and converted into an IP stream for 10GbE output. Additionally, it supports in-band network control, allowing for the retrieval and control of unit information over the same 10GbE as the video. 【Features】 - Compresses the video of the SDI signal using TICO - The number of transmission channels for the compressed system corresponds to four channels of the input SDI - For audio in FS asynchronous mode, sample rate conversion is always performed - Supports up to 16 channels per SDI channel - The 10GbE-IF can be selected in two configurations: redundant mode and individual mode *For more details, please refer to the PDF documentation or feel free to contact us.

• Converters and Transducers

The "IPG2100" is a system frame developed to accommodate an IP-GATEWAY unit that converts 3G/HD/SD-SDI signals into Ethernet IP signals. It houses units for SDI to IP conversion, IP to SDI conversion (bidirectional and unidirectional), monitor system IP/SDI conversion, and multi-channel FS, among others. Additionally, it supports dual AC power input and power unit redundancy, allowing for hot-swapping while powered on. 【Features】 ■ 1U rack mount size, capable of housing up to 2 units ■ USB mini-B connector on the front shelf for maintenance ■ Access to each unit is possible ■ Supports dual AC power input and power unit redundancy ■ Hot-swappable while powered on *For more details, please refer to the PDF documentation or feel free to contact us.

• VPN/Wide Area Ethernet

The "IPG104X" is an SDI to 10Gbit Ethernet uncompressed conversion device with input/output selection FS functionality compatible with SMPTE2022-6, designed for the IPG3000 rack. The SDI signal supports 3G/HD-SDI and can process up to 4 channels simultaneously. This unit can perform both SDI to 10GbE conversion and 10GbE to SDI conversion at the same time. Additionally, it supports in-band network control, allowing for the retrieval of unit information and control over the same 10GbE as the video. Furthermore, it is equipped with two 1GbE ports, enabling transmission of both 10GbE and 1GbE over the available bandwidth. 【Features】 ■ Supports up to 16 channels per SDI channel ■ IP conversion method: Compliant with SMPTE2022-6A (uncompressed) ■ FEC coding: Compliant with SMPTE2022-5 (conditional) ■ 10GbE-IF can be selected in either redundant or individual mode ■ Audio in FS asynchronous mode will always undergo sample rate conversion *For more details, please refer to the PDF documentation or feel free to contact us.

• Converters and Transducers

The "IPG101X" is an SDI to 10Gb Ethernet uncompressed conversion device compatible with SMPTE2022-6, featuring input/output selection with FS functionality for IPG3000 shelves. It is possible to add FS to either the input or output, such as synchronizing asynchronous resources or providing co-phase output for SDI. This unit can simultaneously convert from SDI to 10GbE and from 10GbE to SDI. Additionally, it supports in-band network control, allowing for information retrieval and control of the unit over the same 10GbE as the video. 【Features】 ■ IP conversion method: Compliant with SMPTE2022-6A (uncompressed) ■ FEC coding: Compliant with SMPTE2022-5 (conditional) ■ The 10GbE interface can be selected in two modes: redundant and individual ■ Unified output of base clock is possible with IEEE1588V2 protocol ■ BB output is possible according to SMPTE2059 standards (IN/OUT switching method) *For more details, please refer to the PDF document or feel free to contact us.

• Converters and Transducers

The "FSV3000" is a management server that controls the IP router (IVR3000). It can manage and control up to 16 IP routers (IVR3000) simultaneously with a single unit. It can be configured with up to 2 PCI cards, allowing it to also be used as a general-purpose system server. Additionally, the fan is located at the front of the shelf, enabling the replacement of the FAN block without lowering the shelf board. 【Features】 ■ 1U rack mount size ■ The device control OS is configured with RAID5 using three 2.5-inch SSDs ■ Even if one SSD fails, it can be replaced while powered on ■ It automatically recovers, so there is no impact on operations ■ Supports dual power supply units, allowing for hot-swapping from the back of the shelf while powered on *For more details, please refer to the PDF document or feel free to contact us.

• server

The "IVR3000" is a device that routes 3G/HD/SD signals converted to Ethernet IP signals. It allows for HD equivalent video routing of 192×192 with a single IP router. It can simultaneously handle IP packetized video streams, control signals, files, and more. Additionally, the device control OS is configured with three 2.5-inch SSDs in RAID 5, allowing for the replacement of one SSD while powered on, with automatic recovery, ensuring no disruption to operations. 【Features】 ■ 1U rack mount size ■ Supports dual power supply units, allowing for hot-swapping from the back of the rack ■ Has BB input to lock the internal clock ■ USB 2.0 connector on the front panel for maintenance *For more details, please refer to the PDF document or feel free to contact us.

• VPN/Wide Area Ethernet

The "IPG3000" is a system frame developed to accommodate an IP-GATEWAY unit that converts 3G/HD/SD-SDI signals into Ethernet IP signals. It is a 3U rack mount size, capable of implementing up to 10 units. Units for SDI to IP conversion, IP to SDI conversion (bidirectional, unidirectional), monitor system IP/SDI conversion, and multi-channel FS are housed, with units designed for easy front insertion and removal. Each unit is configured in pairs with the rear unit based on its application. 【Features】 ■ 3U rack mount size, capable of implementing up to 10 units ■ Fans are located at the front of the shelf, allowing for FAN block replacement without lowering the shelf ■ A USB mini-B connector is available on the front of the shelf for maintenance ■ Access to each unit is possible *For more details, please refer to the PDF document or feel free to contact us.

• VPN/Wide Area Ethernet

The "PMP100" is a device that connects to a professional multimedia drive via USB and allows you to preview video clips stored on the drive using a dedicated application. The monitor output is HDMI, and it is equipped with various features such as timecode display and slide bar movement functions. 【Features】 ■ Video preview function (full-size display, clip selection mode (proxy playback)) ■ Normal playback and continuous clip playback functions ■ Timecode display function ■ Slide bar movement function ■ Various trick play operations (fast forward, rewind, slow playback, frame-by-frame) can be controlled with a single mouse *For more details, please refer to the PDF document or feel free to contact us.

• Video Recorder

The "DDA1000" is a device that outputs 3G/HD/SD-SDI signals to 12 distribution outputs. It features waveform shaping and reclocking functionality, with 12 distribution outputs. The power input is AC 100V to 240V ±10% (50/60Hz), and the power consumption is below 50VA. 【Features】 ■ Equipped with waveform shaping and reclocking functionality ■ 12 distribution outputs ■ Cable compensation for 3G-SDI 100m / HD-SDI 100m / SD-SDI 100m (when using Canare L-5CFB) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements