Lapp Japan List of Products and Services

The "UNITRONIC BUS EIB / KNX" is a cable designed for use in building management (for example, distributed control of lighting, heating, ventilation, energy management, blinds, time management, locking systems, etc.). The cable can be installed in various environments, including above or below plaster, within pipes, and in cable ducts, whether dry or wet. 【Features】 ■ Serial data communication ■ EIB cable tested at 4 kV (for 1 minute) in a tank *For more details, please refer to the PDF document or feel free to contact us.

• Communications

We would like to introduce the fixed-use INTERBUS cable 'UNITRONIC BUS IBS Yv COMBI' handled by Lapp Japan Co., Ltd. The IBS cable is designed for outdoor use or direct burial, and the remote bus cable + installed remote bus cable boasts UV resistance. It is a product compliant with DIN EN 61158. 【Features】 ■ Certified by INTERBUS CLUB ■ 500 kbit/s = maximum 400 m ■ Flame retardant (compliant with IEC 60332-1-2) ■ For outdoor/direct burial use *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS FF" is a FOUNDATION fieldbus cable for process automation. The characteristic impedance is 100 ± 20 Ω at 31.25 kHz. The test voltage is 1500V. It complies with the requirements of ISA/SP50 and FOUNDATION fieldbus for cable type A. 【Features】 ■ UV resistance ■ Wide temperature range ■ For process automation ■ UL/CSA listed certification *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "EPIC DATA CAN Sub-D PRO" is a CAN bus connector for cables with a maximum diameter of 10mm. It boasts high flexibility due to an expanded cable clamp range, allowing for quick and easy connections. With a robust housing material designed for harsh environments, it meets the stringent EMC requirements of challenging conditions. 【Features】 ■ Wide temperature range ■ High mechanical strength (200 contact resistance) ■ Reduced transmission loss ■ Built-in bus termination *For more details, please refer to the PDF document or feel free to contact us.

• Communications

We would like to introduce our CAN bus connector, the 'EPIC DATA CAN Sub-D'. With the built-in connectable termination resistor, it allows for termination or connection of the CAN bus. The 90° version of the cable outlet includes an additional 24 V DC output for powering external devices. 【Features】 ■ Maximum transfer rate of 1 Mbit/s (theoretical value) ■ Termination resistor "ON" - cuts the output side bus cable ■ Switchable termination resistor (built-in) ■ Sensor/actuator ■ No loose parts *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS CAN TRAY" is a CAN bus cable designed for exposed wiring. No additional installation protection for the cable is required. It consists of seven twisted bare copper wires, with a special PE insulation and a copper braided shield. 【Features】 ■ Maximum bit rate: 1 Mbit/s (segment length 40m) ■ UV resistance UL SUN RES ■ Oil resistance, compliant with UL OIL RES I ■ Flame retardant (compliant with CSA FT4): UL vertical tray burning test *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The product is a flame-retardant CAN bus cable. "UNITRONIC BUS CAN" is intended for fixed installation. "UNITRONIC BUS CAN FD P" is designed for high-mobility applications and is halogen-free. The maximum bit rate is 1 Mbit/s (segment length 40m). 【Product Composition (UNITRONIC BUS CAN)】 ■ 0.22, 0.34, 0.5mm²: 7 strands twisted with bare copper wire 0.75mm²: fine wire twisted with bare copper wire ■ Special PE insulation ■ Color code compliant with DIN 47100 ■ Copper braided shield ■ PVC outer sheath Outer sheath color: purple (RAL 4001) *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PA" is a PROFIBUS cable for process automation. The maximum cable length varies depending on multiple factors such as power supply voltage and current demand. We offer a lineup of "standard cable assemblies" and "Fast Connect cable assemblies (UL/CSA CMG certified)." The Fast Connect type is treated for oil resistance and UV resistance. 【Features】 ■ Bit rate = 31.25 kbit/s transmission technology RS485 is also possible, but the bit rate is limited to 1.5 Mbit/s. ■ Maximum cable length varies depending on multiple factors. ■ Flame retardant (compliant with IEC 60332-1-2). *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "EPIC DATA PB M12T" is a PROFIBUS connector suitable for industrial applications. It offers a cost-effective and efficient wiring solution for PROFIBUS installations. Its compact design saves space while ensuring robustness. The operating ambient temperature for the plug/socket is -25°C to +80°C. 【Features】 ■ For PROFIBUS stubs ■ Shielded version ■ Ideal for industrial applications *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "EPIC DATA PB Sub-D FO" is a PROFIBUS connector with a built-in bus termination. It easily supports long distances (PCF 250m/POF 65m) and achieves high cost-effectiveness through rapid installation. With the integration of repeater functionality, it can regenerate data signals such as slope, output, and mark/space ratio. 【Features】 ■ Maximum Distance ■ POF Fiber: 65 m ■ PCF Fiber: 250 m ■ Diagnostic LED (blue, green, red, yellow) ■ Built-in Bus Termination ■ Standard Current Consumption: 100 mA ■ Power Supply Voltage: 5.0 V DC (supplied from terminals) *For more details, please refer to the PDF materials or feel free to contact us.

• Communications

The "UNITRONIC BUS PB FD P FC" is a halogen-free cable for movable applications designed for PROFIBUS. It complies with UL/CSA type CMX, UL 444, and CSA C22.2 no. 214. This cable is suitable for high-mobility applications such as cable chains and moving machine parts, and it features flame resistance and oil resistance. 【Features】 ■ Flame resistance (compliant with IEC 60332-1-2) ■ Oil resistance ■ UL/CSA listed certification ■ Halogen-free for movable applications *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PB FD P A" is a halogen-free cable for movable use in PROFIBUS applications. It is suitable for typical twisting applications such as loops in wind turbines (WTG). It can be used in applications that require an outer sheath that is flame-retardant and halogen-free, with characteristics similar to PUR. 【Features】 ■ Halogen-free ■ Flame-retardant (compliant with IEC 60332-1-2) ■ Oil-resistant ■ UL/CSA listed certification *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PB FD P" is a halogen-free cable for movable applications designed for PROFIBUS. It is suitable for installation in areas with electromagnetic interference due to its double shielding. The cable can be used with PROFIBUS-DP, PROFIBUS-FMS, and FIP, and is suitable for applications requiring a flame-retardant and halogen-free outer sheath with characteristics similar to PUR. 【Features】 ■ Halogen-free ■ Flame-retardant (compliant with IEC 60332-1-2) ■ Oil-resistant *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PB Y 7-W FC BK" is an outdoor PROFIBUS cable. It boasts resistance to acids, alkalis, and certain oils at room temperature, as well as UV resistance and weather resistance. It can be used with PROFIBUS-DP, PROFIBUS FMS, and FIP. It features seven twisted wires made of bare copper, with a special PE insulation, copper braid, and aluminum laminated film for shielding. 【Features】 ■ UV resistance and weather resistance ■ Resistance to acids, alkalis, and certain oils at room temperature ■ FastConnect (FC) cable design ■ The cable can be used with PROFIBUS-DP, PROFIBUS FMS, and FIP *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PB BURIAL FC" is a PROFIBUS cable suitable for outdoor use and direct burial. It can be used with PROFIBUS-DP, PROFIBUS-FMS, and FIP. The characteristic impedance is 150±15Ω, and the temperature range is -40°C to +60°C. 【Features】 ■ Double sheath ■ High durability, UV resistance, weather resistance ■ The cable can be used with PROFIBUS-DP, PROFIBUS-FMS, and FIP ■ Ideal for outdoor use and direct burial *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PB YY" is a PROFIBUS cable designed for outdoor/direct burial use. It complies with PROFIBUS DP (DIN 19245 and EN50170, such as SIEMENS SIMATIC NET), making it suitable for FIP (Factory Instrumentation Protocol) as well. The temperature range for movable use is -5°C to +50°C, and for fixed use, it is -40°C to +80°C. 【Features】 ■ Double sheath ■ High durability, UV resistance, weather resistance ■ The cable can be used with PROFIBUS-DP, PROFIBUS-FMS, and FIP ■ Suitable for outdoor use and direct burial *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS PB ARM" is a PROFIBUS armored cable that can be used in harsh industrial environments for PROFIBUS-DP or FIP. It complies with PROFIBUS DP (DIN 19245 and EN50170, such as SIEMENS SIMATIC NET), making it also suitable for FIP (Factory Instrumentation Protocol). The characteristic impedance is 150±15Ω, and the temperature range is -40°C to +70°C. 【Features】 ■ EMC optimized design ■ Flame retardant (compliant with IEC 60332-1-2) ■ UV resistant *For more details, please refer to the PDF document or feel free to contact us.

• Communications

We would like to introduce our PROFIBUS cable, 'UNITRONIC BUS PB HEAT 180'. No additional cable protection against high temperatures is required, and it can be used in high-temperature areas up to 180 °C. It features a shielding structure made of copper braid and aluminum laminated film. 【Features】 ■ High oil resistance ■ No additional cable protection against high temperatures is required ■ Heat resistance *For more details, please refer to the PDF document or feel free to contact us.

• Communications

We would like to introduce our PROFIBUS cables, 'UNITRONIC BUS PB 105 / UNITRONIC BUS PB 105 plus'. The 'UNITRONIC BUS PB 105' is designed for environments with a maximum temperature of 105°C, while the 'UNITRONIC BUS PB 105 plus' is heat-resistant and does not require additional cable protection against high temperatures. It features a shielding structure made of copper braid and aluminum laminated film. 【Features (UNITRONIC BUS PB 105)】 ■ Heat resistance ■ Flame retardant (compliant with IEC 60332-1-2) ■ Oil resistance ■ Maximum temperature 105°C *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "UNITRONIC BUS ASI FD" is an AS-INTERFACE bus cable designed for continuous movable use. It is composed of ultra-fine stranded wire made of tin-plated copper, offering high oil resistance. Data and power are transmitted from a geometrically coded two-core flat cable (without shielding), protecting against polarity reversal. Sensors are connected to the ASI module (coupling module) using round cross-section cables (connection cables). 【Features】 ■ The PUR version is halogen-free and complies with IEC 60754-1 ■ Flame retardant (compliant with IEC 60332-1-2, UL FT-2 combustion test) ■ Polarity reversal protection ■ Conductors make contact through "perforation technology" within the ASI module ■ Sensors are connected to the ASI module using round cross-section cables *For more details, please refer to the PDF document or feel free to contact us.

• Communications

"OLFLEX HEAT 650 SC" is a power control cable with excellent conductivity even at high temperatures, thanks to its nickel-stranded wire. It is suitable for use in ambient temperatures ranging from -50°C to +700°C. It can be applied in heating modules, electric heating devices, heating ovens, heavy industry, steel processing, casting, glass and ceramic processing, and the chemical industry. 【Features】 ■ Combustion characteristics ・ Flame retardant ■ Halogen-free ■ Suitable only for use in dry conditions ■ OLFLEX HEAT 1565 SC is recommended when the peak temperature of the application exceeds 700°C for a short time. *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 1565 SC" is a power control cable suitable for use in dry environments. It is resistant to temporary contact with molten metals or glass and has low conductor resistance due to nickel-plated copper conductors. It can be applied in places such as smelters, coke plants, refineries, and glass products, as well as aluminum and iron. 【Features】 ■ Short-term: up to +1565℃ ■ Combustion characteristics ・Flame retardant ■ Suitable only for use in dry conditions *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 350 SC" is a power control cable suitable for use in ambient temperatures ranging from -50°C to +350°C. It can be applied in various industries, including smelting furnaces and glass manufacturing, as well as in chemical and power plant construction, and in the construction of motors and smelting furnaces. It features low conductor resistance due to nickel-plated copper conductors. 【Features】 ■ Combustion characteristics - Flame retardant ■ Halogen-free ■ Suitable only for use in dry conditions ■ OLFLEX HEAT 650 SC and OLFLEX HEAT 1565 SC are recommended for applications where peak temperatures exceed +350°C. *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 260 SC" is a power control cable that is resistant to contact with various chemical media. It has a small outer diameter, maximizing space and weight savings. It possesses stress crack resistance against frequent temperature fluctuations. It is suitable for use in environments with high operating temperatures, frequent use of chemicals, or limited space. 【Features】 ■ Combustion characteristics ・Flame retardant ■ Made of OLFLEX HEAT 260 PTFE ・High insulation resistance and high abrasion resistance ・Low water absorption ・Microbial resistance *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 205 SC" is a power control cable that can be used in both high and low temperature requirements. It is resistant to contact with various chemical media and maximizes space and weight savings with its small outer diameter. It is suitable for use in environments with high operating temperatures, heavy use of chemicals, or limited space. 【Features】 ■ Combustion characteristics ・Flame retardant ■ Made of OLFLEX HEAT 205 FEP ・High insulation resistance and high abrasion resistance ・Low water absorption *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEXR HEAT 180 SiF/GL" is a power control cable with fiberglass protective braiding. Proper ventilation is required. It has insulating properties after the combustion of SiO2 ash remaining on the conductor. In addition, we also offer the separable twin conductor "OLFLEX HEAT 180 SiZ" and the 10kV high voltage ignition wire "OLFLEX HEAT 180 FZLSi." 【Features】 ■ Halogen-free in accordance with IEC 60754-1 ■ Combustion characteristics ■ Resistance to various oils, alcohols, vegetable and animal fats, and chemicals ■ Proper ventilation is required *For more details, please refer to the PDF materials or feel free to contact us.

• cable

"OLFLEX HEAT 180 SiD" is a single-core silicone electric wire cable that is resistant to various oils, alcohols, plant and animal fats, and chemicals. Proper ventilation is required. After the combustion of SiO2 ash remaining on the conductor, it has insulating properties and is suitable for areas with high ambient temperatures where conventional insulating materials quickly become brittle. 【Features】 ■ Combustion characteristics ■ Halogen-free (compliant with IEC 60754-1) ■ Resistance to various oils, alcohols, plant and animal fats, and chemicals ■ Proper ventilation is required ■ The mechanical properties of silicone cables decrease from +100°C in the absence of air *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 180 SiF A" is a silicone single-core cable with an extended temperature range and UL-AWM certification. It is certified for manufacturers of machinery, equipment, and devices for export to the United States and Canada. It has insulating properties after the combustion of SiO2 ash remaining on the conductor. It is suitable for areas with high ambient temperatures where conventional insulating materials quickly become brittle. 【Features】 ■ Combustion characteristics - Non-corrosive combustion gases (compliant with IEC 60754-2) - Low smoke emission (compliant with IEC 61034-2) ■ Halogen-free (compliant with IEC 60754-1) ■ Resistance to various oils, alcohols, plant and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 180 SiF" is a multi-purpose electrical cable with an extended temperature range. It is suitable for areas with high ambient temperatures where conventional insulation materials quickly become brittle. It boasts resistance to various oils, alcohols, plant and animal fats, and chemicals, and retains insulation properties after the combustion of SiO2 ash remaining on the conductor. 【Features】 ■ Combustion Characteristics - Non-corrosive combustion gases (in accordance with IEC 60754-2) - Flame retardant (in accordance with IEC 60332-1-2) ■ Halogen-free (in accordance with IEC 60754-1) ■ Resistance to various oils, alcohols, plant and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 125 SC" is a VDE-tested cable that complies with EN 50525-3-41 (H05Z-K & H07Z-K) for more demanding requirements. It is suitable for wiring during the assembly of cable harnesses and the installation of switchgear panels. It helps to suppress damage to buildings and equipment caused by the formation of toxic acidic fumes during a fire, ensuring safety in crowded places. 【Features】 ■ Wear and tear resistance ■ UV resistance compliant with ISO 4892-2 ■ Combustion behavior - Fire resistance (IEC 60332-1-2) - Halogen-free (IEC 60754-1) - No generation of corrosive gases (IEC 60754-2) *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 1565 MC" is a fiberglass cable suitable for use in dry environments. It boasts low conductor resistance due to nickel-plated copper conductors and is resistant to temporary contact with molten metal or glass. It is suitable for use at ambient temperatures ranging from -195°C to +400°C. 【Features】 ■ Combustion characteristics ■ Halogen-free ■ Suitable only for use in dry conditions *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 350 MC" is a fiberglass cable suitable for use in dry environments. It has a voltage rating of 230/400V and features low conductor resistance due to nickel-plated copper conductors. With a wide operating temperature range, the product can be used in applications with a heat resistance class of C (>180°C). 【Features】 ■ Combustion characteristics ■ Halogen-free ■ Suitable only for use in dry conditions *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 260 GLS" is a cable certified by the German Lloyd's Register for use in marine diesel engines. It is suitable for applications that require special insulated cables and protective gear, where high temperatures and significant mechanical stress are present. Protected from mechanical damage by finely woven galvanized steel braiding. 【Features】 ■ Combustion characteristics ■ Stress crack resistance against frequent temperature fluctuations ■ High insulation resistance and high abrasion resistance ■ High elongation resistance and tear strength ■ Suitable for use only in dry conditions *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 260 C MC" is a copper-shielded polytetrafluoroethylene cable designed for extreme high-load applications. It boasts resistance to acids, alkalis, solvents, lacquers, gasoline, oils, and many other chemical media, making it suitable for sensor technology due to its appropriate electrical and mechanical properties. The copper braid in the shielded version complies with EMC requirements, protecting the cable from electromagnetic interference. 【Features】 ■ High insulation resistance and high abrasion resistance ■ Low water absorption ■ Microbial resistance ■ Copper braid in the shielded version complies with EMC requirements ■ Protects the cable from electromagnetic interference *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 260 MC" is a polytetrafluoroethylene cable designed for harsh load conditions. Its small cable diameter allows for space-saving installation, and its appropriate electrical and mechanical properties make it suitable for sensor technology. It is an efficient solution proven in harsh environments such as painting factory lines. 【Features】 ■ Flame retardant ■ High insulation resistance and high abrasion resistance ■ Low water absorption ■ Microbial resistance ■ Non-stick insulating material ■ Weather and ozone resistance *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 205 MC" is a fluorinated ethylene propylene cable designed for harsh applications. It boasts resistance to acids, solvents, lacquers, gasoline, oils, and many other chemical media, making it suitable for space-saving and lightweight applications due to its small cable diameter. Additionally, a 4-core version with PTFE insulation and special core identification code, "OLFLEX HEAT 205 C MC PTFE/FEP," is also available. 【Features】 ■ Flame retardant ■ High dielectric strength and high abrasion resistance ■ Low water absorption ■ Microbial resistance ■ Non-stick insulating material ■ Weather and ozone resistance *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 180 GLS" is a steel-armored silicone cable designed to withstand increased mechanical stress. It boasts a longer resistance than conventional silicone cables in harsh applications and is protected from mechanical damage by a finely woven galvanized steel braid. This product is suitable for use in dry conditions. 【Features】 ■ Combustion characteristics - Non-corrosive combustion gases (compliant with IEC 60754-2) - Flame retardant (compliant with IEC 60332-1-2) ■ Halogen-free (compliant with IEC 60754-1) ■ Suitable only for use in dry conditions *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 180 EWKF C" is a shielded silicone cable with enhanced mechanical properties. It boasts a longer lifespan than conventional silicone cables in demanding applications, reducing mechanical damage with an outer sheath material that offers notch resistance and tear resistance. The copper braid shields the cable from electromagnetic interference. 【Features】 ■ EWKF: Resistance to initial tear propagation and breakage ■ Combustion properties - Non-corrosive combustion gases (in accordance with IEC 60754-2) - Flame retardant (in accordance with IEC 60332-1-2) ■ Halogen-free (in accordance with IEC 60754-1) ■ Excellent resistance to hydrolysis and UV ■ Resistance to various oils, alcohols, vegetable and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 180 EWKF" is a power control cable made from a silicone compound that has notch resistance and tear resistance, reducing damage caused by mechanical stress. It boasts a longer lifespan than conventional silicone cables in demanding applications, and because it uses special additives in the EWKF silicone, a cable version protected by protective gear is unnecessary. Its flexibility allows for easy installation even in tight spaces. 【Features】 ■ EWKF: Resistance to initial tear propagation and breakage ■ Combustion characteristics - Non-corrosive combustion gases (in accordance with IEC 60754-2) - Flame retardant (in accordance with IEC 60332-1-2) ■ Halogen-free (in accordance with IEC 60754-1) ■ Excellent hydrolysis resistance and UV resistance ■ Resistance to various oils, alcohols, vegetable and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 180 C MS" is a flexible power control cable that can be easily installed in narrow spaces. It is certified for manufacturers of export machinery, instruments, and equipment in the United States and Canada. The copper braid shields the cable from electromagnetic interference. 【Features】 ■ Combustion characteristics - Non-corrosive combustion gases (compliant with IEC 60754-2) - Flame retardant (compliant with IEC 60332-1-2, CSA FT-1) - Low toxicity combustion gases (compliant with EN 50305) ■ Halogen-free (compliant with IEC 60754-1) ■ Excellent hydrolysis resistance and UV resistance ■ Resistance to various oils, alcohols, vegetable and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 180 MS" is a power control cable designed for use in the United States and Canada. The thick cable design meets the requirements of the FT-1 frame test and is approved for external connections to devices and equipment. Additionally, its flexibility allows for easy installation in tight spaces, and it retains insulating properties after the combustion of SiO2 ash remaining on the conductor. 【Features】 ■ Combustion Characteristics - Non-corrosive combustion gases (compliant with IEC 60754-2) - Flame retardant (compliant with IEC 60332-1-2, CSA FT-1) - Low toxicity combustion gases (compliant with EN 50305) ■ Halogen-free (compliant with IEC 60754-1) ■ Excellent hydrolysis resistance and UV resistance ■ Resistance to various oils, alcohols, plant and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 180 H05SS-F EWKF" is a silicone connection cable standardized across Europe. It reduces damage from mechanical stress with a silicone compound that has notch resistance and tear resistance. It is more durable than conventional H05SS-F standard cables for harsh environmental conditions. Additionally, it has insulating properties after the combustion of SiO2 ash remaining on the conductor. 【Features】 ■ EWKF: Resistance to initial tear propagation and breakage ■ Combustion characteristics - Non-corrosive combustion gases (compliant with IEC 60754-2) - Flame retardant (compliant with IEC 60332-1-2) ■ Halogen-free (compliant with IEC 60754-1) ■ Excellent hydrolysis resistance and UV resistance ■ Resistance to various oils, alcohols, vegetable and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 180 SiHF" is a silicone cable with an extended temperature range. Due to its flexibility, it can be easily installed in narrow spaces and retains insulating properties after the combustion of SiO2 ash remaining on the conductor. It is resistant to various oils, alcohols, plant and animal fats, and chemicals. 【Features】 ■ Combustion characteristics - Non-corrosive combustion gases (compliant with IEC 60754-2) - Flame retardant (compliant with IEC 60332-1-2) ■ Halogen-free (compliant with IEC 60754-1) ■ Resistance to various oils, alcohols, plant and animal fats, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "OLFLEX HEAT 125 C MC" is a power control cable that can meet harsh application requirements due to its electron beam cross-linked polymer construction. It reduces flame propagation and the density and toxicity of smoke gases during a fire, thereby minimizing damage to buildings and equipment caused by the formation of toxic acidic fumes. The copper braid shields the cable from electromagnetic interference. 【Features】 ■ Combustion characteristics ■ Halogen-free ■ No flame propagation, compliant with IEC 60332-3-22, IEC 60332-3-24, IEC 60332-3-25 ■ Oil resistance, compliant with IEC 60227-1 (ST9) and EN50264-1 (EM104) ■ UV resistance compliant with ISO 4892-2 ■ Ozone resistance (compliant with EN 50396) *For more details, please refer to the PDF document or feel free to contact us.

• cable

"OLFLEX HEAT 125 MC" is a power control cable that ensures safety in densely populated areas. It reduces flame propagation during a fire, as well as the density and toxicity of smoke gases, thereby minimizing damage to buildings and equipment caused by the formation of toxic acidic fumes. The electronic cross-linked polymer cable meets harsh application requirements. 【Features】 ■ Combustion characteristics ■ Halogen-free ■ No flame propagation, compliant with IEC 60332-3-22, IEC 60332-3-24, IEC 60332-3-25 ■ Oil resistance, compliant with IEC 60227-1 (ST9) and EN50264-1 (EM104) ■ UV resistance compliant with ISO 4892-2 ■ Ozone resistance (compliant with EN 50396) *For more details, please refer to the PDF document or feel free to contact us.

• cable