サンインスツルメント List of Products and Services

Manufacturer: Eblana Photonics (Ireland) Eblana Photonics develops narrow linewidth lasers in the range of 650-2400nm for sensing, telecom, and measurement applications. Eblana's consistent performance and high-quality products greatly contribute to simplifying customers' product development.

Manufacturer: Access Laser (USA) This is a CO laser with a mid-infrared wavelength, featuring a model that allows for variable wavelengths through a grating. It supports a wide range of variable wavelengths for various applications. In addition to a maximum power of 2W, it boasts a stability of less than 2%.

Manufacturer: Cycle (Germany) The "SOPRANO-15," released by Cycle in Germany, is a high-power femtosecond laser developed for industrial applications, operating at 1550nm. With specifications including a pulse width of 350fs, average power of 4.5W, pulse energy of 4.5μJ, and peak power of 50MW, it boasts an unparalleled power level for femtosecond lasers in the 1.5μm range. Designed for continuous operation for 24 hours, it is suitable for industrial applications such as material processing, as well as for scientific applications like spectroscopy and OPO pump light sources. There is also a low-power model called "SOPRANO-15 Mini."

Manufacturer: PriTel (USA) PriTel's low-noise optical amplifier "LNFA" series can amplify weak light with low noise through a tandem configuration of a preamplifier and power amplifier. The noise figure of the 33dBm (2W) model is a low noise of "<4.5dB @0dBm input." Output between stages after preamplification is also available as an option. It is widely used in applications such as research and development, 1550nm optical communication, fiber lasers, and optical switches.

Manufacturer: Sacher Lasertechnik (Germany) The Serval Plus amplifier system is a system that can amplify the Littman/Metcalf master laser from 500 to 2500mW using a taper amplifier. It allows the high-performance Littman/Metcalf laser to be used at high power. The 'TEC-420-0785-1500-FC' is a model equipped with a polarization-maintaining fiber output option, featuring a high-power model with 1.6W before the fiber and 800mW after the fiber. The built-in seed laser is an external cavity laser of the Littman type, and the wavelength after amplification can be varied from 780 to 800nm. This model is ideal for applications requiring high output, such as Raman spectroscopy.

Manufacturer: Korean Laser Technology (South Korea) Korean Laser Technology (KLT) offers a variety of VCSEL modules. The wavelengths range from 808nm to 1550nm, with power from 5mW to 800W, featuring top-hat beams and various packaging options. It is also possible to integrate VCSELs with diffusers or photodiodes. We select the appropriate chip based on the required range, such as for close-range (10-20cm), proximity (up to 2m), or mid-range (up to 5m) applications. These modules are widely used in applications such as machine vision, gas, smoke, and dust detection, LIDAR, laser curtains, and optical communication. KLT designs the optimal module according to the specifications requested by our customers. All products are custom-made.

Manufacturer: Pantec Biosolutions (Liechtenstein) This is an Er:YAG laser with a wavelength of 2.94µm and an average power of 50W. It boasts a compact size of 60 x 120 x 75 mm while delivering high power of 50W. Control is managed via command from a computer, making it suitable for OEM applications. The pulse width can be set between 40 to 600µs, and the repetition rate is variable from 5 to 1000Hz. It achieves 50W of power with a pulse width of 400µs and a repetition rate of 250Hz. It is used in applications such as esthetics, dermatology, dentistry, otolaryngology, orthopedics, laser processing, and defense.

Manufacturer: CNI Laser (China) This is a high-energy DPSS laser with a wavelength of 266nm. It has a short pulse duration of 5ns, a variable repetition rate of 1Hz to 1kHz, and a pulse energy of 100µJ. Control is performed via a dedicated software on a computer or by connecting an included display. The air-cooled, compact housing makes this laser suitable not only for research but also for OEM applications.

Manufacturer: CNI Laser (China) This is a high-energy nanosecond blue laser with a fiber output at a wavelength of 447nm. It features a pulse energy of 40µJ, a pulse width of <5ns, and a repetition rate of 10kHz with an AO Q-switch. This model supports both internal and external trigger drive, is air-cooled, and is ideal for applications requiring high energy in the blue wavelength range. Its compact design and air-cooled specifications make it suitable for a wide range of uses, including research and OEM applications.

Manufacturer: CNI Laser (China) This is a high-power CW blue laser with a wavelength of 444nm. It couples with a 400µm core multimode fiber, and the power from the SMA905 connector is 25W. Modulation options up to 30kHz (analog and digital), guide light options, and collimated output are also available. It is an easy-to-use high-power diode laser with a compact body and air cooling.

Manufacturer: CNI Laser (China) This is a custom specification mode-locked fiber laser characterized by a narrow linewidth in the picosecond pulse range. It achieves an average power of 1W, a repetition rate of 100MHz, a pulse width of 17ps, and a narrow linewidth of 125pm with linear polarization. Control is operated via dedicated software from a computer. With high beam quality and stability, and a compact air-cooled housing, this fiber laser is suitable for both research and OEM applications.

Manufacturer: CNI Laser (China) This is a high-energy nanosecond model that emits an intensely strong light at a wavelength of 556nm, so bright that it is difficult to keep your eyes open. It has an average power of 25W, pulse energy of 5mJ, pulse width of <570ns, and a repetition rate of 1–4kHz, making it a Q-switched laser. It operates on AC220V, with both internal and external trigger capabilities, and is water-cooled. This model is ideal for applications requiring high energy in the yellow-green wavelength range. It can be proposed up to a maximum of 50W.

Manufacturer: PriTel (USA) PriTel's compact and reasonably priced femtosecond laser "FFL-FR-HP" series is a 100mW model with a built-in EDFA. It emits pulses as short as 72fs with a 25cm PM patch cord. The standard FFL series allows for variable pulse width and wavelength tuning by exchanging bandpass filters, while the FFL-FR series reduces costs by fixing the pulse width and wavelength. It is widely used in applications such as research and development, optical switching, optical frequency combs, and terahertz wave generation.

Manufacturer: Access Laser (USA) Access Laser's CO2 laser "SLX" is a model developed for OEMs with a compact and user-friendly design. Any wavelength within the range of 9.2 to 10.7 µm can be set at the time of manufacturer shipment (wavelength variable option available). The resonator uses an inverter with a low thermal expansion coefficient, and is equipped with a standard resonator adjustment mechanism called "Line Tracker," which maintains a constant housing temperature and actively controls the resonator length. Specifications such as an average power of 1W (at the strongest oscillation line), a narrow linewidth of 100kHz, high beam quality with M2 < 1.2, and output stability of ±3% make it an optimal laser for infrared spectroscopy light sources.

Manufacturer: Access Laser (USA) The Access Laser CO2 laser "DL500" is a model developed for dental applications. The wavelength of 9.3µm has good absorption in dental enamel, and with a high energy of 12mJ and a high peak power of 500W, it enables minimally painful treatment of hard tissues. It can also be used for procedures such as hemostasis in soft tissues. Being air-cooled, it is easy to integrate into devices and is user-friendly.

Manufacturer: CNI Laser (China) This is a high-power CW yellow laser with a wavelength of 589nm. It is a model with a spatial output beam of 4.5W. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW orange (orange) laser with a wavelength of 607nm. It is a model with a spatial output beam of 200mW. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW red laser with a wavelength of 660nm. It is a 3W model with fiber output beam. Analog and digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a nanosecond short pulse laser with a wavelength of 355nm. It is a high-energy model with a pulse energy of 2mJ. It can be synchronized with external signals.

Manufacturer: CNI Laser (China) This is a CW UV (ultraviolet) laser with a wavelength of 360nm. It is a single longitudinal mode model with a spatial output beam of 50mW. Fiber output is available as an option.

Manufacturer: CNI Laser (China) This is a CW purple (violet) laser with a wavelength of 375nm. It is a model with a spatial output beam of 100mW. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW blue-purple (blue-violet) laser with a wavelength of 405nm. It is a model with a spatial output beam of 3W. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a nanosecond short pulse laser with a wavelength of 1064nm. It is a high-energy model with a pulse energy of 500mJ. It can be synchronized with external signals.

Manufacturer: CNI Laser (China) This is a CW green (green) laser with a wavelength of 532nm, ideal for embedded applications with a compact body. It is a 5W model with a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 980nm. It is a 100W model with fiber output beam. Analog and digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW single-frequency DPSS blue (blue) laser with a wavelength of 457nm. It is a model with a spatial output beam of 1W. The coherence length exceeds 50m.

Manufacturer: CNI Laser (China) This is a CW single-frequency DPSS red laser with a wavelength of 639nm. It is a model with a spatial output beam of 400mW. The coherence length exceeds 50m.

Manufacturer: CNI Laser (China) This is a CW single-frequency DPSS blue (blue) laser with a wavelength of 473nm. It is a model with a spatial output beam of 100mW. The coherence length exceeds 50m.

Manufacturer: CNI Laser (China) This is a CW single-frequency DPSS green (green) laser with a wavelength of 532nm. It is a model with a spatial output beam of 1W. The coherence length exceeds 50m.

Manufacturer: CNI Laser (China) This is a CW laser with a wavelength of 1064nm. It is a model with a single longitudinal mode and a spatial output beam of 500mW. The coherence length is over 50m. Fiber output is available as an option.

Manufacturer: CNI Laser (China) This is a high-power CW diode laser with a wavelength of 785nm. It has a spatial output beam power of 2.5W and a power of 2W with a 400um core diameter fiber. Analog and digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a high-power CW diode laser with a wavelength of 808nm. It has a power output of 5W with a 400um core diameter fiber. Analog and digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a single-frequency nanosecond laser with a wavelength of 1064nm. It is a model with a pulse energy of 200µJ and a peak power of 8kW.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 680nm. It has a power output of 800mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 730nm. It has a power output of 100mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 1380nm. It has a power output of 100mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 2200nm. It has a power of 50mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) CNI Laser's line laser module "MDL-XL" offers a wide range of wavelengths from 375nm to 980nm. The drivers are built-in, making it easy to integrate into your equipment. It features adjustable focus and can operate in a temperature range of -10℃ to +50℃. Customers input and control the electrical signals for laser operation. This laser is ideal for applications such as 3D scanning measurement, welding position lighting, dimensional measurement, and rail inspection.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 1310nm. It has a power output of 200mW with a core diameter of 400um multimode fiber. Analog and digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW LD pumped solid-state laser with a wavelength of 1177nm. It has a power output of 150mW in spatial output. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW LD pumped solid-state laser with a wavelength of 1122nm. It has a power output of 300mW in spatial output. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW red laser with a wavelength of 660nm. It is a model with a fiber output beam of 100mW. It features a linewidth of <0.06nm.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 635nm. It has a power output of 200mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 1060nm. It has a power of 1W in a spatial output beam. Fiber output and analog/digital modulation are available as options.

Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 852nm. It has a power of 20mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.