サンインスツルメント Product Lineup

Manufacturer: Advanced Photonic Sciences (USA) The MicroGreen from Advanced Photonic Sciences is the smallest laser module in the world among commercial green lasers. It is a 5.6mm TO-can type, 532nm microchip laser. It features a power range of 5 to 80mW, complies with CDRH Class 3A (<5mW), and has a beam close to the diffraction limit.

• Laser Components

Manufacturer: PriTel (USA) This is a femtosecond laser module that enables a wavelength range of 1.5um and a pulse width of less than 100fs. It is compact in size and can be easily integrated into devices.

• Laser Components

Manufacturer: AdValue Photonics (USA) This is a compact amplifier module for 1µm band lasers. It can be used not only for short pulse lasers such as nanosecond, picosecond, and femtosecond lasers but also for CW lasers. The average power after amplification reaches up to 120W, with a peak power of 1.5MW and a gain of 23dB. The seed laser is input through a single-mode fiber, and the amplified light is output spatially. The compact body measures 217mm x 30mm x 17mm and manages heat through conduction cooling. This product is also capable of amplifying single-frequency lasers.

• Amplifier

Manufacturer: Intellego Technologies (Sweden) There are various UV irradiation devices effective for sterilizing the novel coronavirus (COVID-19) using 254nm UV light, and you can easily measure the UV dose with this card. The color changes in three stages (25, 50, 100 mJ/cm²) according to the dose. Recent studies have shown that at 254nm, a dose of 22 mJ/cm² can inactivate 99.9% of the novel coronavirus. Why not check the dose of your current equipment with this card?

• Lamps and light emitting devices

Manufacturer: CNI Laser (China) This is a continuous wave laser with a long coherence length, ideal for holography applications. It offers 600mW at 639nm, 50mW at 656.5nm, 20mW at 660nm, and up to 2.5W at 671nm. It has numerous achievements in the domestic market.

• Laser Components

Manufacturer: CNI Laser (China) This is a continuous wave laser with a long coherence length, ideal for holography applications. It offers 20mW at 515nm, 100mW at 523.5nm, 100mW at 526.5nm, 50mW at 530nm, 10W at 532nm, 100mW at 543nm, 100mW at 552nm, 100mW at 556nm, and 80mW at 561nm. It has numerous achievements in the domestic market.

• Laser Components

Manufacturer: CNI Laser (China) This is a CW laser with a long coherence length, ideal for holography applications. It can offer up to 2W at 457nm and up to 100mW at 473nm. It has a proven track record in the domestic market.

• Laser Components

Manufacturer: CNI Laser (China) We offer a lineup of DPSS (Diode-Pumped Solid State) lasers and diode lasers. The laser heads are equipped with a cooling system that performs precise temperature control and are driven by laser power supplies that feature protective functions such as overcurrent and overheating prevention. CNI lasers are characterized by stable power, ease of operation, reliable performance, and long lifespan. You can choose from four models: "High Power," "High Stability," "Low Noise," and "Single Frequency." Both spatial output and fiber output are available.

• Laser Components

Manufacturer: CNI Laser (China) We offer a lineup of DPSS (Diode-Pumped Solid State) lasers and diode lasers. The laser heads are equipped with a cooling system that performs precise temperature control and are driven by laser power supplies that include protective features such as overcurrent and overheating measures. CNI lasers are characterized by stable power, ease of operation, reliable performance, and long lifespan. You can choose from five models: "High Energy," "High Power," "High Stability," "Low Noise," and "Single Frequency." Both spatial output and fiber output are available.

• Laser Components

Manufacturer: CNI Laser (China) We offer a lineup of DPSS (Diode-Pumped Solid State) lasers and diode lasers. The laser heads are equipped with a cooling system that performs precise temperature control, and they are driven by laser power supplies that include protective features such as overcurrent and overheating prevention. CNI lasers are characterized by stable power, ease of operation, high reliability, and long lifespan. You can choose from five models: "High Energy," "High Power," "High Stability," "Low Noise," and "Single Frequency." Both spatial output and fiber output are available.

• Laser Components

Manufacturer: CNI Laser (China) We offer a lineup of DPSS (Diode-Pumped Solid State) lasers and diode lasers. Our laser heads are equipped with a cooling system that provides precise temperature control and are driven by laser power supplies that include protective features such as overcurrent and overheating prevention. CNI lasers are characterized by stable power, ease of operation, reliable performance, and long lifespan. You can choose from five models: "High Energy," "High Power," "High Stability," "Low Noise," and "Single Frequency." Both spatial output and fiber output are available.

• Laser Components

Manufacturer: CNI Laser (China) In addition to a wide range of products, we also provide detailed support for custom requests. Please let us know your required specifications. CW: From 1mW to a maximum of 80W Pulsed: Picosecond, nanosecond, microsecond, up to a maximum of 200W Narrow linewidth: < 5 MHz

• Laser Components

Manufacturer: Access Laser (USA) This is the best-selling model in the lineup of wavelength-variable models. It can achieve a power of 200 mW at the maximum oscillation line. It can output any wavelength using a micrometer. It is used in many applications such as optical element evaluation and measurement light sources.

• Laser Components

Manufacturer: Access Laser (USA) Until the development of the L3 family, it was considered impossible to create a low-power, high-performance ultra-compact sealed RF-excited CO2 laser. The L3 achieves both low power and high performance with dimensions of 190mm x 50mm x 63mm. The beam quality is a perfect M2=1.1. The output stability of the standard model L3 is ±20%, but for applications requiring more precision, the L3S can reduce output fluctuations to ±2%, making it suitable as an ultra-compact precision reference light source. As an additional special option, the L3 and L3S can be manufactured as Class IIIb. This allows them to be used in environments where Class 4 is not permitted. If you have any other special requests, please feel free to consult us. Engineers from the manufacturer with high technical expertise will consider the possibilities.

• Laser Components

Manufacturer: Access Laser (USA) Until the development of the L3 family, it was considered impossible to create a low-power, high-performance ultra-compact sealed RF-excited CO2 laser. The L3 achieves both low power and high performance with a size of 190mm x 50mm x 63mm. The beam quality is a perfect M2=1.1. The output stability of the standard model L3 is ±20%, but for applications requiring more precision, the L3S can reduce output fluctuations to ±2%, making it suitable as an ultra-compact precision reference light source. As an additional special option, the L3 and L3S can be manufactured as Class IIIb. This allows them to be used in environments where Class 4 is not permitted. If you have any other special requests, please feel free to consult us. Engineers from the manufacturer with high technical expertise will consider the possibilities.

• Laser Components

Manufacturer: American Ultraviolet (USA) The mobile ultraviolet (UV) sterilization device is characterized by its high efficiency, effectiveness, and cost performance. The 'MRS33-8' is equipped with eight 33-inch (84cm) sterilization lamps (wavelength 253.7nm) and is powerful. This strong UV-C sterilizing ultraviolet light allows for the disinfection of indoor spaces in a short time. [MRS33-8 Features] ■ Equipped with eight 33-inch (84cm) sterilization lamps ■ Powerful UV-C ultraviolet light disinfects in a short time, reducing cleaning time and improving efficiency ■ Automatic shut-off feature with a 360-degree motion sensor and thermal sensor ■ Contributes to reducing cleaning time before and after use in operating rooms and patient rooms ■ Approximately 12,000 hours of long-lasting HV lamp ■ Easy to move with casters *For more details, please refer to the PDF document or feel free to contact us.

• Ultraviolet irradiation equipment

Manufacturer: American Ultraviolet (USA) The mobile ultraviolet (UV) sterilization device designed to achieve zero secondary infections in the patient's surrounding environment is characterized by high efficiency, effectiveness, and excellent cost performance. The 'MRS45-12' is equipped with 12 sterilization lamps of 45 inches (114 cm) in size (wavelength 253.7 nm) and is powerful. This strong UV-C sterilizing ultraviolet light can disinfect indoor spaces in a short time. [MRS45-12 Features] - Equipped with 12 sterilization lamps of 45 inches (114 cm) in size - Disinfects quickly with powerful UV-C ultraviolet light, reducing cleaning time and improving efficiency - Automatic shut-off function with 360-degree motion sensor and thermal sensor - Contributes to reducing cleaning time before and after use in operating rooms and patient rooms - Long-lasting HV lamp with approximately 12,000 hours of lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Ultraviolet irradiation equipment

Manufacturer: Chromacity (Scotland) The Chromacity 520 femtosecond laser system is a laser with a minimum pulse duration of 150 fs and a maximum power of 1.5W. The wavelength is 520 nm, making it suitable for a wide range of multiphoton and SHG imaging applications. Its high average power is also ideal for the pump laser of OPOs that generate mid-infrared light.

• Laser Components

Manufacturer: Chromacity (Scotland) The Chromacity 1040 femtosecond laser system is a laser with a minimum pulse duration of 150 fs and a maximum power of 4 W. The wavelength is 1040 nm, making it suitable for a wide range of multiphoton and SHG imaging applications. The high average power is also ideal for the pump laser of OPOs that generate mid-infrared light.

• Laser Components

Manufacturer: Chromacity (Scotland) The Chromacity Mid-IR OPO is a broadband, high-brightness coherent light source that covers the important 5-12µm fingerprint region.

• Laser Components

Manufacturer: Chromacity (Scotland) The Chromacity OPO boasts excellent wavelength tunability and power in the near-infrared region, making it an ideal laser for a wide range of applications, from multiphoton microscopy to spectroscopy. Chromacity's optical parametric oscillator technology generates light from 1.48 µm to 4.0 µm. Using a proprietary pumping technology that is patent pending, it produces signal and idler light with high reliability and power. Additionally, pump laser light that is useful for CARS microscopy can also be extracted and utilized.

• Laser microscope

We are a manufacturer of 3D micro optics. We offer a variety of products including micro lens arrays, diffractive optical elements, beam splitters, diffusers, and homogenizers. As solutions for 3D sensing and imaging, we also provide ToF diffuser packages, CMOS sensor chips, and ToF camera modules. Additionally, we can propose various modules, including VICSEL and others.

• Other optical parts

Manufacturer: OPTOMAN (Lithuania) Why use standard electron beam evaporated mirrors when you can obtain IBS mirrors with a reflectivity of >99.95% at almost the same price? Cost-effective IBS-coated dielectric mirrors perform well in all laser applications where losses at specific wavelengths and angles of incidence are critical. Compared to other coatings such as electron beam or ion-assisted deposition, IBS-coated mirrors are denser, more robust, and exhibit lower scattering and absorption. To prevent thermal absorption effects, they are coated on high-purity fused silica substrates. OPTOMAN's IBS-coated mirrors can achieve specifications of maximum reflectivity >99.998% and total losses (absorption, scattering, transmission) <15ppm at specific wavelengths and angles of incidence. They are coated on high-purity quartz glass (flat, spherical, or wedge-shaped) and polished to a roughness of <2Å (0.2nm). The dense coating, close to bulk density, shows very little performance degradation due to environmental factors such as temperature and humidity. Complex coatings with very high reflectivity can achieve R>99.95% for GTI laser mirrors and Tp/Ts >10000:1 for thin-film polarizers.

• mirror

Manufacturer: Necsel IP (USA) The LuxxMaster Compact Raman Boxx LML series is an award-winning laser light source stabilized by volume Bragg grating (VBG) technology. It features a robust housing and is suitable for applications requiring narrow linewidths, such as Raman spectroscopy. With its compact body and turnkey ease of operation, this Raman Boxx is an ideal laser for industrial and military/defense applications.

• Laser Components

Manufacturer: Necsel IP (USA) The single longitudinal mode solution, SLM series, is a high-stability, high-power laser. It is a perfect light source as an alternative to HeNe lasers. The economical turnkey compact model, SLM-632, operates at 632.8 nm with a maximum power of 50 mW. The operating temperature range of the SLM-632 is 0 to 40°C. It has a compact body with a volume of 86 cm³ and weighs 135 grams, with low power consumption of 3.3V/2A.

• Laser Components

Manufacturer: OtO Photonics (Taiwan) This is the smallest model in OtO's lineup. There are two types of input ports: flat type and 90° type, allowing for selection based on the design of the device being equipped. It has a spectral resolution of 3–10nm, a wavelength range of 330–850nm, and an SMA905 connector. The UM2380 and UM2390 models have built-in lenses to enhance sensitivity. OtO's standard software "SpectraSmart" uses easy-to-read icons for intuitive operation. Users can easily perform basic measurements such as reflection and transmission, as well as time-specified measurements. The software also supports the Japanese language. Demo units are available, so please give it a try!

• Laser Components
• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is a near-infrared model equipped with an InGaAs sensor. It has a wavelength range of 900 - 1700 nm and 2500 nm, developed for applications in food, pharmaceuticals, and biotechnology.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is a near-infrared model equipped with a low-noise InGaAs sensor with TEC cooling. It has a wavelength range of 900 - 1700 nm or 900 - 2500 nm and is developed for applications in food, pharmaceuticals, and biotechnology. The sensitivity can be switched by selecting the gain mode. The cooling of the sensor allows for the detection of fine signals. -------------------------------------------------------------- Specifications -------------------------------------------------------------- ■ Spectral resolution: 5.2 nm or more (depending on slit width) ■ Wavelength range: 900 - 1700 nm / 900 - 2500 nm ■ Dimensions: 110 (W) x 86 (D) x 32 (H) mm ■ Exposure time: 0.1 ms - 15 seconds ■ Drive mode: Low gain or high gain ■ Fiber optic input port: SMA905

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is the most flexible flagship model of OtO Photonics, the "SmartEngine" series. The minimum resolution is 0.2 nm, allowing for high-precision measurements. Depending on the application, you can select the optimal grating and customize the wavelength range and resolution.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is the ultra-compact spectroscopic module "Red Sparrow." It offers an easy-to-integrate size and performance, and is compatible with near-infrared wavelengths.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) The "PKG-SE12-DH/BA" is a standard kit set necessary for spectral measurement. It includes a series of tools required for measurement, such as the SE series spectrometer, light source, platform, ND filters, and cuvettes. This kit allows for easy spectral experiments from high school to university level. The included software "SpectraSmart" can be set to measure in various modes such as reflection, transmission, and absorbance.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is the "PocketHawk," a model with a good balance of size, performance, and cost. It features a Czerny-Turner optical configuration, is palm-sized, and there are also ultraviolet to near-infrared models available.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is the "PocketHawk," a model with a good balance of size, performance, and cost. It features a Czerny-Turner optical configuration, is palm-sized, and there is also a near-infrared model available.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) Introducing the high-performance "HummingBird" in a compact size. It features a Czerny-Turner design and supports a wide range of specifications through various combinations. There is a broad choice available for both wavelength range and resolution.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) This is a low-noise model equipped with a TE cooler. It is the ideal model for Raman-related applications. You can customize it according to your needs by selecting the grating and slit width.

• Spectroscopic Analysis Equipment

Manufacturer: OtO Photonics (Taiwan) The Camera Module series consists of a back-illuminated TEC sensor with a resolution of 2048 x 64 pixels and a high-performance 32-bit RISC controller. Its cooling system is designed to effectively reduce dark noise by lowering the temperature by up to 25°C from the ambient temperature, providing a stable low-temperature environment suitable for applications requiring long-term measurements. The CM series features excellent performance, including outstanding sensitivity, high SNR, high dynamic range, low thermal noise, and fast spectral response. It is suitable for measurements in the Raman band and across the entire wavelength range (180–1100 nm).

• Spectroscopic Analysis Equipment

Manufacturer: art photonics (Germany) The FlexiRay series from art photonics is a high-quality fiber bundle that can accommodate a wide range from 0.2 to 18µm. The FlexiRay fiber bundle converters are designed to meet a wide range of customer needs with various core diameters and protective tubes. Round-to-Round (R/R) and Round-to-Line (R/L) fiber bundles are likely the most popular and necessary products, as they are used with a wide range of optical sensors and probes. Art offers straight and branching design optical fiber bundles. For spectroscopic applications, they provide a unique metal-coated fiber bundle that blocks crosstalk between fibers. This bundle achieves a higher signal-to-noise ratio than polymer-coated competing bundles. Art's silica fiber bundles offer SMA905, FC/PC, ST, or custom optical connector bundles for the 0.2 to 2.2µm range.

• LAN/Optical cable

Manufacturer: art photonics (Germany) art photonics offers the FlexiRay fiber cable in the mid-infrared range of 3 - 18µm. It is used in a wide range of applications such as mid-infrared light transmission, spectroscopy, and remote temperature sensing. Various options for core diameter, optical connectors, and protective tubes are available even in standard models. art's technology has achieved precise positioning within the connector ferrule and perfect quality of the fiber end face. Each fiber is shipped after undergoing detailed quality inspection.

• LAN/Optical cable

Manufacturer: art photonics (Germany) art photonics offers the FlexiRay chalcogenide infrared fiber cable in the mid-infrared range of 1.1 - 6.5µm. It is used in a wide range of applications, including optical transmission for quantum cascade lasers and flexible infrared imaging systems. Various options for core diameter, optical connectors, and protective tubes are available even in standard models. art's technology has achieved precise positioning within the connector ferrule and perfect quality of the fiber end face. Each fiber is shipped after undergoing thorough quality inspection.

• LAN/Optical cable

Manufacturer: art photonics (Germany) The new design of the PEEK shaft infrared fiber ATR probe is a cost-effective perfect solution for applications in small reactors in the lab. All FlexiSpec ATR probes are compatible with any type of FTIR, other infrared spectrometers, spectrophotometers, and sensors.

• probe
• Other inspection equipment and devices

Manufacturer: art photonics (Germany) The FlexiRay fiber cable is ideal for high-brightness, high-quality beam laser transmission. The robust design of the FlexiRay ensures long-term use in industrial and medical applications. Its greatest feature is its ability to withstand high temperatures of up to 600°C for high-power and high-vacuum applications. The metal-coated bundle allows for the combination of multiple lasers in the power range of several kW. art photonics' technology achieves precise fiber positioning within the connector ferrule and perfect quality of the fiber end face. With art's quality control and equipment, including digital fiber microscopes, infrared cameras, power meters, beam profilers, and 100W diode lasers, we conduct pre-shipment inspections to ensure that we deliver the best cables to our customers.

• LAN/Optical cable

Manufacturer: art photonics (Germany) The sterilizable ATR fiber probe is art's new product, FlexiSpec. This series is compatible with all types of ATR (Attenuated Total Reflection) elements and can be used with any FTIR spectrometer. The unique Shaft-in-Shaft design makes FlexiSpec the ideal tool for bioprocesses that require sterilization while taking advantage of the benefits of mid-infrared FTIR spectroscopy.

• probe

Manufacturer: art photonics (Germany) The ATR fiber optic probe for harsh environments can be used in process spectroscopy to monitor inline reactions over a wide temperature range from -100°C to +250°C, as well as in the near-infrared and mid-infrared ranges. It can also withstand pressures of up to 200 Bar and is suitable for use with FTIR or other infrared spectrometers and automatic process control spectral sensors.

• probe

Manufacturer: art photonics (Germany) The FlexiSpec series is the latest generation of products for total reflection measurement methods. This near-infrared and mid-infrared fiber ATR probe can be used with all types of FTNIR, FTIR, and other infrared spectrometers, spectrophotometers, as well as sensors for infrared LEDs or quantum cascade lasers. The patent-pending ATR immersion optical fiber probe is ideal for reaction monitoring in laboratories, pilot plants, and fully automated process control.

• probe

Manufacturer: Active Fiber Systems (Germany) This is a femtosecond laser that has been commercialized and boasts one of the highest power levels in the world. It can offer a maximum average power of 2kW and a maximum pulse energy of 20mJ.

• Laser Components