多田プラスチック工業 List of Products and Services

Introducing the 'Compact DC Centrifugal Pump' suitable for supplying water to electric kettles. The operating noise is below 50dB and complies with food sanitation laws. There are types available with flow rates of over 3.0L/min and over 3.7L/min. It is used in home and commercial coffee servers, water servers, and various other applications. 【Lineup】 <Compact DC Centrifugal Pump (Micro Pump) for Liquids> ■CP16P7K12000 ■CP16B7B24100 *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "Compact DC Centrifugal Pump" suitable for the water purification circulation of alkaline water purifiers. We can accommodate lot sizes from 1,000 to 10,000 units. This pump can be utilized in various industries, including the low-voltage and home appliance sectors, as well as the food machinery and medical device industries. In addition to complying with the Food Sanitation Act, we offer models with flow rates of 3.0L/min or higher and 3.7L/min or higher. 【Product Lineup】 <Compact DC Centrifugal Pump (Micro Pump) for Liquids> ■CP16P7K12000 ■CP16B7B24100 *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "Compact DC Centrifugal Pump" suitable for the distribution of sodium hypochlorite water generation systems. We offer models with a flow rate of 3.0 L/min or higher and 3.7 L/min or higher. The operating environment range is from 5°C to 50°C, and the operating noise is below 50 dB. It can be utilized in various industries, including the low-voltage and home appliance sectors, food machinery industry, and medical device industry. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "Compact DC Centrifugal Pump" suitable for the transfer of hot and cold water in cup vending machines. Ideal for the weak current and home appliance industries, as well as the food machinery and medical device industries. Compliant with the Food Sanitation Act. It is used in various applications such as home and commercial coffee servers, water servers, and more, with flow rates available in types of 3.0L/min or higher and 3.7L/min or higher. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Small DC Centrifugal Pump," suitable for supplying hot water for coffee extraction in coffee drip machines that we handle. We offer models with flow rates of 3.0L/min or more and 3.7L/min or more. It is well-suited for the weak current and home appliance industries, as well as the food machinery and medical device industries. It is used in various applications, including home and commercial coffee servers and water servers. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Painting Compressor Airbrush Small DC Diaphragm Pump (Micro Pump) for Gas." Despite its compact size, it boasts high suction and discharge power, achieving both pressurization and depressurization with a single unit. It can handle both air and liquids, designed to meet various requirements, providing a compact and suitable product. 【Features】 ■ Customized design tailored to applications - Compatible with both air and liquids - Designed to meet various needs, offering a compact and suitable product ■ Powerful performance achieving high vacuum - High suction and discharge power despite its compact size - Achieves both pressurization and depressurization with a single unit *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Small DC Diaphragm Pump and Small DC Centrifugal Pump" for heatstroke prevention cooling vests (water-circulating) that we handle. These are also used in various applications such as cooling (water-cooled) jackets and water-cooled pillows. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, Rubber, Assembled Product ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Compact DC Diaphragm Pump and Compact DC Centrifugal Pump," which are suitable for heatstroke prevention by cooling with water that we handle. They are used in various applications, including cooling (water-cooled) type jackets and water-cooled type pillows. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, Rubber, Assembled Product ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

Our rigid polyurethane does not undergo hydrolysis due to water absorption. Since the cells are mostly independent bubbles, it is difficult for water to pass through. However, due to the presence of impurities and hydrolysis from radical reactions, as well as the effects of NOX, degradation can occur, albeit in trace amounts. 【Specifications】 ■Material - Resin - Polyurethane - Thermosetting resin *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Small DC Centrifugal Pump (Micro Pump) H-Q." The lift (actual lift) indicates the height from the water surface to the discharge outlet. For example, when calculating the flow rate at a lift height of 1m, it is approximately 2.8L/min according to the characteristic curve. In addition to boasting a delivery record of 35 million units, it features a long lifespan and tough specifications that easily exceed a total durability time of 250 hours. 【Features】 - Achieves compactness, lightweight, and low cost through optimization of casing structure. - Adopts a magnetic coupling method utilizing magnetic force, eliminating the shaft section to maintain a consistently clean discharge. - Long lifespan and tough specifications that easily exceed a total durability time of 250 hours. *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "Air Purifier for Medical Devices - Compact DC Diaphragm Pump Type R27," suitable for liquid cleaning applications that our company handles. It features high pressure, low noise, compact size, and lightweight, as well as self-priming and no need for priming water. It is used in various applications such as ink transfer and spraying various liquids. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no need for priming water ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce our "Humidifier for Medical Devices - Compact DC Diaphragm Pump R27 Type," which features improved design (custom design) capabilities. It is compact, lightweight, and has high pressure and low noise characteristics. The rubber components are primarily made of EPDM. It is used in various applications such as ink transport and spraying of various liquids. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Air Purifier Compact DC Diaphragm Pump R27 Type." The rubber components are mainly made of EPDM. It features a compact size, lightweight, high pressure, and low noise. It can be used for liquid spraying applications such as hot water (boiling water) distribution, ink transportation, and cooling water circulation. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Air Purifier Small DC Diaphragm Pump Type R27." The rubber parts are mainly made of EPDM. It features a compact size, lightweight design, high pressure, and low noise. It can be used for various applications such as condensation water distribution, ink transportation, and spraying various liquids for liquid steam water supply. 【Features】 - High pressure, low noise - Compact and lightweight - Self-priming, no priming water needed - Motor with brushes: DC12V, 24V - Brushless motor: DC12V, 24V - Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Compact DC Diaphragm Pump R27 Type" that we handle. It is self-priming and does not require a priming water. Both the brushed motor and brushless motor are available in DC12V and DC24V. It is used for various applications including hot water (boiling water) distribution, spraying various liquids, and ink transportation. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Brushed motor: DC12V and DC24V ■ Brushless motor: DC12V and DC24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Antibacterial Inner Frame (Mask Frame)." By expanding the space inside the mask to prevent the lips from touching, it makes breathing and talking easier, and prevents lipstick from transferring onto the mask. With its antibacterial properties, it suppresses bacterial growth and can be used with both disposable and cloth masks. 【Features】 ■ Washable and reusable ■ Prevents makeup smudging and discomfort while breathing ■ Reduces moisture buildup while wearing a mask ■ Antibacterial properties to suppress bacterial growth ■ Usable with both disposable and cloth masks *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Antibacterial Inner Frame (Mask Frame)." It can be washed with detergent or disinfectant alcohol and reused multiple times. By expanding the space inside the mask to prevent the lips from touching, it makes breathing and talking easier. With a unique design that reduces moisture buildup while wearing the mask and minimizes the surface area that touches the skin, it alleviates discomfort during use. 【Features】 ■ Easy to breathe and talk ■ Washable with detergent or disinfectant alcohol for repeated use ■ Prevents lipstick from transferring to the mask as it does not touch the mouth directly ■ Unique design minimizes skin contact, reducing discomfort during wear ■ Prevents breathlessness *For more details, please refer to the PDF document or feel free to contact us.

Our company, which manufactures and sells synthetic resin products, rigid polyurethane foam products, pumps, and plastic household goods, handles "vibration testing equipment." This equipment is suitable for the automotive (mass production), office automation, and medical device industries, so please feel free to contact us when needed. *For more details, please refer to the PDF materials or feel free to contact us.

Our company manufactures and sells synthetic resin products, rigid polyurethane foam products, pumps, plastic household goods, and more. We also conduct tests in our soundproof room. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

Here is an introduction to the basics of injection molding. Injection molding is a process where heated and melted material is injected into a mold, and by cooling and solidifying, it becomes a molded product. It is suitable for mass production of products with complex shapes and constitutes a major field of molding processing. 【Injection Molding Process】 1. Clamping 2. Injection 3. Holding pressure 4. Cooling 5. Mold opening 6. Product removal *For more details, please refer to the PDF document or feel free to contact us.

We will introduce the differences between general-purpose plastics, engineering plastics, and super engineering plastics. "General-purpose plastics" tend to be inexpensive and are used in a wide range of applications, from everyday goods to automotive parts. "Engineering plastics" have a heat resistance of over 100°C and offer superior heat resistance, durability, and mechanical strength (over 50 MPa) compared to general-purpose plastics. "Super engineering plastics" are resins that can withstand temperatures of over 150°C and can be used for extended periods in high-temperature environments. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

At Tada Plastic Industry, we handle "PP + lubricant + antibacterial agent." We add silicone (lubricant) to PP to make it slippery. Additionally, we incorporate an antibacterial agent into the PP. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need our services. *For more details, please refer to the PDF materials or feel free to contact us.

Regarding units of pressure, the new measurement system uses Pa (Pascal), N/m² (Newton per square meter), and bar as SI units, while Torr is recognized as a non-SI unit for pressure within the body, and mmHg (millimeters of mercury) is recognized for blood pressure. There are two methods for expressing vacuum pressure. The vacuum industry uses absolute pressure, while other industries often use gauge pressure, so when looking at documents or catalogs, it is necessary to check which method is used to express pressure. [Notation of Vacuum Pressure] 1. Absolute pressure with absolute vacuum as 0 (zero) - Often abbreviated with "a" or "abs" after the unit (often omitted) 2. Gauge pressure with atmospheric pressure as 0 (zero) - Often abbreviated with "G" or "Gauge" after the unit (often omitted) *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we handle washable partitions. As a measure against infectious diseases, they can be sprayed with water and thoroughly washed. The surface is made of resin board, and the frame is made of elastomer resin, allowing for cleaning with disinfectant spray to keep it hygienic. 【Features】 ■ Size: 750mm × 1800mm × 24mm (maximum size) * For heights exceeding 1800mm, please consult separately. ■ Weight: Approximately 7kg (maximum size) * Made of rigid polyurethane, lightweight. ■ Made of PP, can be wiped clean when dirty or wet. ■ Can be cleaned with disinfectant spray to maintain hygiene. * For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we can accommodate dimensional tolerances of 0.005mm (down to 0.1 microns) for super engineering plastics (precision injection molding). The lot size ranges from 1,000 to 100,000 pieces, boasting an accuracy of less than 1/1000mm. 【Materials】 ■PPS ■PES ■PEEK ■PSF *For more details, please refer to the PDF document or feel free to contact us.

We handle small DC diaphragm pumps (micro pumps) of the R27 type for liquids. Rubber parts are mainly made of EPDM. They are compact, lightweight, and self-priming, eliminating the need for priming water. These pumps are used in various applications, including cooling water circulation, condensate water distribution, and ink transportation. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Brushed motor: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we assist with issues such as re-delivery problems and provide insulation for maintaining low temperatures in delivery boxes. Are you worried that "you can't receive COOL deliveries in a delivery box"? We offer unique proposals for insulation (rigid urethane and cold retention) and design. Since there is no need for expensive mold investments, it is easy to make specification changes, such as adjusting the thickness of the urethane, to meet the required insulation performance. 【Features】 ■ Customizable size specifications ■ No need for expensive mold investments ■ Maintains temperatures below 30°C for up to 10 hours ■ Compatible with security locks ■ Compatible with anti-theft chains ■ Logo printing available *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we are working in collaboration with chemical manufacturers on injection molding using biodegradable polymers as part of our efforts to address the global issue of microplastics. We manufacture plastic products that decompose in nature, contributing to the global environment. Please feel free to contact us when you need our services. *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce "Rigid Urethane (Cyclopentane)" handled by Tada Plastic Industry. It is highly resistant to chemicals, with the exception of strong acids and some solvents. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. 【Chemical Resistance (Partial)】 ■ Seawater: Stable ■ Methylene Chloride: Swelling ■ MEK: Swelling ■ Concentrated Sulfuric Acid: Dissolution ■ Vegetable Oil: Stable *For more details, please refer to the PDF materials or feel free to contact us.

At Tada Plastic Industry, we processed undercut shapes using injection molding with an undercut treatment in the mold. Typically, if a product has undercuts, it cannot be molded with a standard top-and-bottom mold. Usually, undercut shapes are designed using inclined pins, but in cases where cost is a concern or a slight height is acceptable, undercuts may be used. At our company, we may be able to offer solutions even with undercuts, so please feel free to contact us when needed. *For more details, please refer to the PDF materials or feel free to reach out to us.

At Tada Plastic Industry, we handle pumps that utilize centrifugal force and can operate high-temperature water with magnetic power, even from a distance. We have adopted a method that rotates the impeller in the water passage using magnetic force. Since the water passage and motor are separated, there is no need for a shaft seal, eliminating concerns about liquid leakage. Additionally, we offer an easy-to-maintain detachable type, allowing separation of the pump and motor units, which eliminates the need for drilling holes in the tank. This makes maintenance of the pump unit easier. 【Features】 ■ 35 million units delivered ■ Excellent cost performance ■ Utilizes a magnetic coupling method that harnesses magnetic force ■ High durability ■ Compact size (86g) *For more details, please refer to the PDF document or feel free to contact us.

Our company has a delivery record of 35 million units and offers small DC centrifugal pumps (micro pumps) that demonstrate excellent cost performance. They feature a highly reliable sealing mechanism and high durability. They are designed for compact liquid applications. By adopting a magnetic coupling method that utilizes magnetic force, we have eliminated the shaft, ensuring consistently clean discharge. 【Features】 - Achieves compact size, lightweight, and low cost through optimized casing structure - Utilizes a magnetic coupling method - Maintains consistently clean discharge by eliminating the shaft - Long lifespan and tough specifications that easily exceed a total durability time of 200 hours *For more details, please refer to the PDF document or feel free to contact us.

We manufacture disposable containers in a clean environment by converting our small precision factory (injection molding machines) into clean booths, and we propose dimensional tolerances of 0.005mm (down to 0.1 microns). We will respond with temperature management of precision molding machine molds, which is essential for improving the quality of injection molding (precision), along with equipment that includes sensors. Please feel free to contact us when you need our services. 【Features】 ■ Precision molding equipment in a constant temperature and humidity environment ■ Quality system ■ Essential precision molding machines for improving the quality of injection molding (precision) *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we can provide insulation boards with vacuum insulation panels (VIP). Our technology places vacuum insulation materials in the center of high-insulation polyurethane, which has been adopted for cargo COOL containers. Additionally, leveraging this technology, we have developed a cooling box with vacuum insulation materials. To reduce the power consumption for cooling the containers, we enhance the insulation properties of the entire wall, allowing it to be distributed as an "eco-container." 【Features】 ■ Industry-leading insulation performance ■ Protection of fragile vacuum insulation materials ■ Utilizes the self-adhesive properties of polyurethane, minimizing the risk of peeling and eliminating gaps between the vacuum insulation material and polyurethane, thus reducing performance degradation. *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we can accommodate general-purpose plastics (precision injection molding) with dimensional tolerances down to 0.005mm and 0.1 microns. We boast an accuracy of less than 1/1000mm, with production lots ranging from 1,000 to 100,000 pieces. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need our services. 【Materials】 ■ ABS: ASA, AES ■ PS (Polystyrene): HIPS, GPPS ■ PP (Polypropylene): PP (contains silicone + antibacterial agent) ■ PE (Polyethylene) ■ AS (Acrylonitrile-Styrene) *For more details, please refer to the PDF materials or feel free to contact us.

This product is an insulated deformation floor cover designed to fit the shape of the bathtub. At Tada Plastic Industry, we propose products that utilize the properties of urethane, and we offer suggestions for shapes and molding methods tailored to our customers' needs based on their intended use and environment. We have established a development environment in-house to meet customer requests and are also focusing on the development of molding techniques to prevent warping and deformation. *For more details, please refer to the PDF materials or feel free to contact us.

We will introduce the differences between horizontal and vertical injection molding machines. Injection molding machines come in two types: those that open and close the mold in a vertical direction (vertical type) and those that do so in a horizontal direction (horizontal type). The mold structure is almost the same, but the main difference lies in the space required for the installation of the injection molding machine. Vertical injection molding machines do not take up much width but require height, so they can only be installed in places with high ceilings. Horizontal injection molding machines can be installed even in places with low ceilings. In the past, vertical machines were the mainstream, but recently, due to space constraints, horizontal molding machines have been trending to become the mainstream. *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we handle small DC diaphragm pumps (micro pumps) for gases and liquids, boasting a delivery record of 10 million units. Rubber components are primarily made of EPDM. They are compact, lightweight, and self-priming, eliminating the need for priming water. For gas applications, they are used for internal pressurization/depressurization, detergent foaming, gas collection, and more. For liquid applications, they are utilized for hot water (boiling water) distribution, spraying various liquids, and other diverse uses. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we perform urethane foam molding tailored to specific shapes. We use high-performance urethane (cyclopentane material) that excels in thermal insulation and environmental properties. The thermal conductivity is 0.021 W/mk (initial value), which is approximately 30% more efficient compared to conventional foamed PS (0.034 W/mk). We have a proven track record in producing high-performance cooler boxes and insulated lids. [Advantages compared to conventional foamed PS (expanded polystyrene) attachment] - Prevention of condensation due to temperature differences - Improved thermal insulation performance - Enhanced adhesion of insulation materials - Design and proposals tailored to the specifications required by customers *This contributes to the improvement of product quality. *For more details, please refer to the PDF materials or feel free to contact us.

A pump is a device that mechanically imparts energy to a fluid, increasing its pressure and sending it out. In other words, it transports fluids to higher locations or distant places. 【Types of Pumps】 ■ Non-positive displacement pumps - Centrifugal pumps - Axial flow pumps - Mixed flow pumps ■ Positive displacement pumps - Reciprocating pumps - Rotary pumps ■ Special pumps *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we conducted a comparative experiment on the water absorption properties of rigid urethane and glass wool. Fiber-based insulation materials (glass wool) have high vapor permeability and moisture retention, and they absorb water and sink when placed in water. The intrusion of water into insulation materials can lead to a significant decrease in insulation performance, as well as the growth of mold and mites, and issues arise due to the weight of the moisture causing them to fall. *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we perform undercut processing on undercut-shaped parts using molds in injection molding. Typically, if a product has undercuts, it cannot be molded with a standard top and bottom mold. Usually, undercut shapes are designed using inclined pins, but in cases where cost is a concern or a slight height is acceptable, undercuts may be used. In our company, we may be able to offer solutions even with undercuts. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

In our company, we are capable of handling disposable molded products in the packaging field, including assembly. We have automated visual inspections, and after finishing assembly, we conduct sampling inspections for issues such as bridges and scratches, as well as torque management (for hinges and caps). We carry out consistent operations in a clean room (Class 10000). We strive to deliver high-quality products that ensure safety and traceability to everyone. *For more details, please refer to the PDF materials or feel free to contact us.

The mold is divided into convex and concave parts surrounding the molded product. The convex part is called the core, and the concave part is called the cavity; the core is referred to as the male mold, and the cavity as the female mold. When the cavity and core come together, a hollow space is created, and by injecting plastic into that hollow space, the molded product is completed. The cavity is designed with a slope to facilitate the easy removal of the molded product from the mold. Therefore, the moment the mold opens, the molded product will separate from the cavity. When the mold opens, the molded product sticks to the core. After the mold is fully opened, the molded product on the core side is pushed out by a pin that extracts it from the mold. Thus, when attaching the mold to the injection molding machine, the cavity must always be the fixed side, and the core must be the movable side. *For more details, please refer to the PDF materials or feel free to contact us.*

Our company is engaged in contract manufacturing of molded products using Kaneka's biodegradable biopolymer "Green Planet." This product is a 100% plant-based biopolymer developed by Kaneka Corporation and has obtained the certification "OK Biodegradable MARINE," which means it biodegrades in seawater. It exhibits excellent biodegradability in a wide range of environments. Our company supports the proliferation of this product through injection molding technology that we have refined over more than 70 years. 【Features】 ■ 100% plant-based biopolymer ■ Obtained the certification "OK Biodegradable MARINE" for biodegradation in seawater ■ Excellent biodegradability in a wide range of environments *For more details, please refer to the PDF document or feel free to contact us.