多田プラスチック工業 List of Products and Services

The "VIP Insulation Board" has been adopted for cargo COOL containers. This technology places vacuum insulation material at the center of high-insulation polyurethane. By enhancing the insulation properties of the entire wall, it is distributed as an "eco container." It improves the space utilization rate of insulated transport containers and has the benefit of reducing the power required to cool the container. 【Features】 ■ High-insulation polyurethane coated with vacuum insulation material ■ Industry-leading insulation performance ■ Protection of fragile vacuum insulation material ■ Utilizes the self-adhesive properties of polyurethane, eliminating the risk of peeling and gaps between the vacuum insulation material and polyurethane, making it less likely to degrade in performance. *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we have applied rigid urethane molding to wine cellar doors. By combining double glazing with high-insulation urethane, we can block outside temperatures and maintain a constant temperature inside the cellar. Additionally, we prevent heat bridges and can separate the interior into two temperature zones. 【Features】 ■ Combination of double glazing and high-insulation urethane ■ Blocks outside temperatures and maintains a constant temperature inside ■ Prevents heat bridges ■ Can separate the interior into two temperature zones *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we have filled the window frames with rigid urethane. By blocking heat conduction from the outside, we suppress condensation in the window frame area, keeping the window area always clean. Please feel free to contact us when you need assistance. 【Specifications】 ■Materials ・Resin ・Urethane ・Thermosetting resin ■Lot: 1,000 to 10,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

Rigid polyurethane insulation materials with higher thermal insulation performance and technology have become widely used. To promote environmental harmony, our company was one of the first in the country to introduce cyclopentane foaming equipment in 1994 (using materials with an ozone depletion potential of zero and an extremely low global warming potential). Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. 【Specifications】 ■Materials - Polyurethane - Thermosetting resin - Assembled products *For more details, please refer to the PDF document or feel free to contact us.

We offer "insulated bath covers" with handles. We use polyurethane that balances lightness and insulation (thermal conductivity of 0.021 W/mK), taking environmental considerations into account. Our long-standing technology and strong commitment to "using foamed polyurethane to create the bath covers our customers desire!" have led to the birth of insulated bath covers that achieve both high insulation and high rigidity. We have also established an insulated bath cover laboratory and received factory registration and type certification from the Product Safety Association (SG Mark). Currently, we are actively responding to customer needs, including the development of "deformable insulated bath covers" that fit the curved shapes of bathtubs. We have also worked on research and development to prevent warping and other deformations. 【Features】 - Uses polyurethane that balances lightness and insulation (thermal conductivity of 0.021 W/mK) - Achieves both high insulation and high rigidity - Factory registration and type certification from the Product Safety Association (SG Mark) *For more details, please refer to the PDF document or feel free to contact us.

Our company has established an insulation bath cover laboratory and has received factory registration type certification from the Product Safety Association (SG Mark). Currently, we have successfully developed a "deformed insulation bath cover" that conforms to the curved shape of bathtubs, actively responding to customer needs. Additionally, for further improvements, we are working on research and development aimed at "lightweighting bath covers" while maintaining current performance. 【Features】 ■ Established insulation bath cover laboratory ■ Received factory registration type certification from the Product Safety Association (SG Mark) ■ Successfully developed a "deformed insulation bath cover" that conforms to the curved shape of bathtubs ■ Engaged in research and development aimed at "lightweighting bath covers" while maintaining current performance *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce our quality assurance facilities for the bathtub lid testing laboratory. Simultaneous testing (such as heat resistance tests) can be conducted on four bathtubs at once. Equipped with a refrigeration unit that can control temperatures up to 80°C, we can conduct experiments at ambient temperatures ranging from room temperature to 5°C. This allows for accurate warping performance tests and more. 【Features】 ■ Simultaneous testing (such as heat resistance tests) on four bathtubs ■ Refrigeration unit capable of controlling temperatures up to 80°C ■ Experiments can be conducted at ambient temperatures from room temperature to 5°C ■ Enables accurate warping performance tests *For more details, please refer to the PDF document or feel free to contact us.

We propose a delivery box for cool deliveries that addresses global warming (CO2 reduction) issues. For example, since it is a cool delivery service, we offer unique solutions such as insulation (rigid urethane and refrigeration) and design to tackle problems like re-delivery issues where packages cannot be received in a delivery box. Our delivery box can solve the issues related to the proliferation of delivery boxes due to changes in lifestyle, maintaining a temperature below 30°C for up to 10 hours. 【Features】 ■ Customizable size specifications ■ No need for expensive mold investments ■ Maintains a temperature below 30°C for up to 10 hours ■ Other specifications: compatible with security locks, theft prevention chains, and logo printing available *For more details, please refer to the PDF document or feel free to contact us.

We propose a cool delivery box that can accommodate the increase in online shopping and the rise of dual-income households, which makes daytime deliveries difficult. One of its features is the extended time it can maintain a temperature below 30°C inside the delivery box under direct sunlight. It is easy to make specification changes, such as adjusting the thickness of the insulation material to meet the required thermal performance, and other sizes can also be developed. Additionally, it can be equipped with security locks and anti-theft chains, and various design options, including logo printing, are available. 【Features】 ■ Customizable size specifications ■ No need for significant mold investment ■ Maintains temperature below 30°C for up to 10 hours *For more details, please refer to the PDF document or feel free to contact us.

For those who are resistant to face-to-face delivery, we would like to introduce a suitable cool delivery box as a measure for infection prevention. It maintains a temperature below 30°C for up to 10 hours. Since there is no need for expensive mold investment, it is easy to make specification changes such as adjusting the thickness of the polyurethane to match the required insulation performance. By using this product, we can promote the reduction of redelivery and encourage contactless delivery. 【Features】 ■ Customizable size specifications ■ No need for expensive mold investment ■ Maintains a temperature below 30°C for up to 10 hours *For more details, please refer to the PDF document or feel free to contact us.

We will develop a delivery box with cooling functions that can receive cool delivery. Since there is no need for a high-cost mold investment, it is easy to change specifications such as the thickness of the urethane to match the required insulation performance. We can also accommodate various designs, including logo printing, colors, and wood grain patterns. Additionally, we can support specifications for security locks and anti-theft chains. 【Features】 ■ Specification changes in size are possible ■ No need for high-cost mold investment ■ Maintains a temperature below 30°C for up to 10 hours *For more details, please refer to the PDF document or feel free to contact us.

Our rigid polyurethane does not undergo hydrolysis due to water absorption. Since the cells are mostly independent bubbles, it is difficult for water to pass through. However, due to the presence of impurities and hydrolysis from radical reactions, as well as the effects of NOX, degradation can occur, albeit in trace amounts. 【Specifications】 ■Material - Resin - Polyurethane - Thermosetting resin *For more details, please refer to the PDF document or feel free to contact us.

Our company manufactures and sells synthetic resin products, rigid polyurethane foam products, pumps, plastic household goods, and more. We also conduct tests in our soundproof room. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

We will introduce the differences between general-purpose plastics, engineering plastics, and super engineering plastics. "General-purpose plastics" tend to be inexpensive and are used in a wide range of applications, from everyday goods to automotive parts. "Engineering plastics" have a heat resistance of over 100°C and offer superior heat resistance, durability, and mechanical strength (over 50 MPa) compared to general-purpose plastics. "Super engineering plastics" are resins that can withstand temperatures of over 150°C and can be used for extended periods in high-temperature environments. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

At Tada Plastic Industry, we handle "PP + lubricant + antibacterial agent." We add silicone (lubricant) to PP to make it slippery. Additionally, we incorporate an antibacterial agent into the PP. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need our services. *For more details, please refer to the PDF materials or feel free to contact us.

At Tada Plastic Industry, we handle washable partitions. As a measure against infectious diseases, they can be sprayed with water and thoroughly washed. The surface is made of resin board, and the frame is made of elastomer resin, allowing for cleaning with disinfectant spray to keep it hygienic. 【Features】 ■ Size: 750mm × 1800mm × 24mm (maximum size) * For heights exceeding 1800mm, please consult separately. ■ Weight: Approximately 7kg (maximum size) * Made of rigid polyurethane, lightweight. ■ Made of PP, can be wiped clean when dirty or wet. ■ Can be cleaned with disinfectant spray to maintain hygiene. * For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we have applied rigid urethane molding to the insulation material (periphery and lid) of water heater storage tanks. By placing urethane without gaps between the tank, we can suppress the decrease in water temperature inside the storage tank. Additionally, by using non-combustible paper, we have achieved a fire-resistant performance while still utilizing urethane. 【Features】 ■ Insulation of the outer periphery and top surface of the storage tank ■ Urethane shaped to fit the tank using non-combustible paper as the surface material - By placing urethane without gaps between the tank, we can suppress the decrease in water temperature inside the storage tank (energy-saving) - Space-saving compared to conventional glass wool - Achieved fire-resistant performance while using urethane by employing non-combustible paper *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we assist with issues such as re-delivery problems and provide insulation for maintaining low temperatures in delivery boxes. Are you worried that "you can't receive COOL deliveries in a delivery box"? We offer unique proposals for insulation (rigid urethane and cold retention) and design. Since there is no need for expensive mold investments, it is easy to make specification changes, such as adjusting the thickness of the urethane, to meet the required insulation performance. 【Features】 ■ Customizable size specifications ■ No need for expensive mold investments ■ Maintains temperatures below 30°C for up to 10 hours ■ Compatible with security locks ■ Compatible with anti-theft chains ■ Logo printing available *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we are working in collaboration with chemical manufacturers on injection molding using biodegradable polymers as part of our efforts to address the global issue of microplastics. We manufacture plastic products that decompose in nature, contributing to the global environment. Please feel free to contact us when you need our services. *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce "Rigid Urethane (Cyclopentane)" handled by Tada Plastic Industry. It is highly resistant to chemicals, with the exception of strong acids and some solvents. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. 【Chemical Resistance (Partial)】 ■ Seawater: Stable ■ Methylene Chloride: Swelling ■ MEK: Swelling ■ Concentrated Sulfuric Acid: Dissolution ■ Vegetable Oil: Stable *For more details, please refer to the PDF materials or feel free to contact us.

This product is an insulated deformation floor cover designed to fit the shape of the bathtub. At Tada Plastic Industry, we propose products that utilize the properties of urethane, and we offer suggestions for shapes and molding methods tailored to our customers' needs based on their intended use and environment. We have established a development environment in-house to meet customer requests and are also focusing on the development of molding techniques to prevent warping and deformation. *For more details, please refer to the PDF materials or feel free to contact us.

Efforts are being made to replace conventional foaming agents for urethane with non-fluorinated options that have a lower environmental impact. Non-fluorinated urethane foaming agents include water-blown, cyclopentane, and HFO, among others. Water-blown foaming agents have inferior insulation performance compared to alternative fluorocarbons, requiring greater thickness to maintain equivalent performance, which increases costs. However, cyclopentane and HFO do not have performance drawbacks compared to alternative fluorocarbons, and they are expected to accelerate the transition to non-fluorinated options in the future. To continue this progress, it is necessary for companies to maintain the profits required for their operations, but we believe it is also essential to recognize our role as a more socially responsible entity and to continue our activities accordingly. As part of this commitment, our company supports the United Nations' "SDGs (Sustainable Development Goals)" and will work towards the realization of a sustainable society. *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we have applied rigid urethane molding to the insulation material (outer circumference and lid) of hot water storage tank heaters. By placing urethane without gaps between the tank, we can suppress the drop in water temperature inside the storage tank. Additionally, by using fireproof paper, we have achieved a fire-resistant performance while still utilizing urethane. 【Features】 ■ Insulation for the outer circumference and top surface of the storage tank ■ Urethane shaped to fit the tank, using fireproof paper as the surface material - By placing urethane without gaps between the tank, we can suppress the drop in water temperature inside the storage tank (energy-saving) - Space-saving compared to conventional glass wool - Achieved fire-resistant performance while using urethane by incorporating fireproof paper *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we perform urethane foam molding tailored to specific shapes. We use high-performance urethane (cyclopentane material) that excels in thermal insulation and environmental properties. The thermal conductivity is 0.021 W/mk (initial value), which is approximately 30% more efficient compared to conventional foamed PS (0.034 W/mk). We have a proven track record in producing high-performance cooler boxes and insulated lids. [Advantages compared to conventional foamed PS (expanded polystyrene) attachment] - Prevention of condensation due to temperature differences - Improved thermal insulation performance - Enhanced adhesion of insulation materials - Design and proposals tailored to the specifications required by customers *This contributes to the improvement of product quality. *For more details, please refer to the PDF materials or feel free to contact us.

At Tada Plastic Industry, we conducted a comparative experiment on the water absorption properties of rigid urethane and glass wool. Fiber-based insulation materials (glass wool) have high vapor permeability and moisture retention, and they absorb water and sink when placed in water. The intrusion of water into insulation materials can lead to a significant decrease in insulation performance, as well as the growth of mold and mites, and issues arise due to the weight of the moisture causing them to fall. *For more details, please refer to the PDF document or feel free to contact us.

At Tada Plastic Industry, we handle "Insulated Bath Covers." Our technology has achieved high thermal insulation performance with a temperature drop of only 2.0°C after 6 hours, thanks to innovative support structures for energy-efficient bathtubs and the dual insulation layer that overcomes the strength weaknesses of high-performance insulation materials. This has led to high expectations for widespread adoption due to controlled cost increases. We have also established an Insulated Bath Cover Laboratory and received factory registration type certification from the Product Safety Association (SG Mark). 【Features】 - Uses high-performance urethane (cyclopentane material) with excellent insulation and environmental properties - Thermal conductivity: 0.021 W/mk (initial value) - Approximately 30% higher performance compared to typical foamed PS (0.034 W/mk) - Non-fluorine formulation - Ozone depletion potential is "zero," resulting in an extremely low global warming potential *For more details, please refer to the PDF materials or feel free to contact us.

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with the order of thermal conductivity being "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mK (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mK) *For more details, please refer to the PDF document or feel free to contact us.

Our company is engaged in contract manufacturing of molded products using Kaneka's biodegradable biopolymer "Green Planet." This product is a 100% plant-based biopolymer developed by Kaneka Corporation and has obtained the certification "OK Biodegradable MARINE," which means it biodegrades in seawater. It exhibits excellent biodegradability in a wide range of environments. Our company supports the proliferation of this product through injection molding technology that we have refined over more than 70 years. 【Features】 ■ 100% plant-based biopolymer ■ Obtained the certification "OK Biodegradable MARINE" for biodegradation in seawater ■ Excellent biodegradability in a wide range of environments *For more details, please refer to the PDF document or feel free to contact us.