信栄物産 List of Products and Services

The 【Mirror Stand Base】 is an option for the Shinei Bussan garage mirror. It allows for easy installation of the mirror when there is no place to mount it or when drilling into the ground is not possible. It is suitable for checking the rear of the vehicle and for checking the car's lights. Not for outdoor use. Mirror sold separately. *For more details, please download the PDF or feel free to contact us.

The "gate post and ceiling mounting hardware" is an option for the Shinei Bussan garage mirror. It can be securely installed even on narrow gate posts. It is also useful when lowering it about 20 cm from the ceiling. It is suitable for store parking lots and general household parking lots. *Only the Shinei Bussan garage mirror can be installed. Mirror sold separately. *For more details, please download the PDF or feel free to contact us.

The garage mirror option SK-30 is a mounting bracket designed for poles with a diameter of 25 to 60 mm. It has a wide effective range (25 to 60 mm) and can be securely installed with just one wrench (for 13 mm). 【Features】 - Can be mounted on poles ranging from 25 mm to 60 mm *For more details, please download the PDF or feel free to contact us.

The H-beam dedicated mounting bracket is an option for the Shin-Ei Bussan convex mirror. It allows for easy and safe installation of mirrors without drilling holes, utilizing H-beams or I-beams in factories or self-propelled multi-story parking lots. <Features> - Compatible with Shin-Ei Bussan garage mirrors, acrylic mirrors, and stainless steel mirrors (small size). - The angle can be adjusted freely. - Can be installed on materials up to 16mm thick. (If you support us, we can accommodate thicker materials as well.) Mirrors are sold separately. Mirrors from other companies cannot be installed. *For more details, please download the PDF or feel free to contact us.

The curved mirror option U-band can be installed on a wall in places where it is not possible to erect a post due to embedding. It can be anchored to the wall in locations such as the rooftop of a self-propelled multi-story parking lot where digging into the ground is not possible. 【Features】 It is used when there is no space for a foundation and there is a solid wall. Available in five sizes: 34φ, 50.8φ (compatible with single pipes), 60.5φ, 76.3φ, and 89.1φ.

The Shin Ei Bussan curve mirror option [Front Mounting Bracket] is suitable when the extension is insufficient or when you want to install the bracket at a 90-degree angle. 【Features】 - Can extend approximately 27 cm forward. - Can be installed at a 90-degree angle.

The Shin Ei Bussan curb mirror option [Front Extension Free Bracket] is a bracket used when the extension is insufficient or when it needs to be limited. It is suitable for locations with site restrictions or where the mirror is obscured by foliage due to seasonal changes. 【Features】 - Can be attached to brackets with a diameter of 34 to 50.8 mm. - Available in three sizes: 15 cm, 25 cm, and 35 cm. - Can be installed at an angle.

The Shin-ei Bussan curved mirror bracket for two mirrors can be attached to a post by sandwiching the mirrors on both sides. It is suitable for T-junctions where you want to check both left and right. 【Features】 - Three types: 34Φ, 50.8Φ, 60.5Φ - Easy installation by simply sandwiching.

The Shin'ei Bussan curb mirror mounting bracket for utility poles is an option that can be installed on round or square poles with diameters ranging from 60 to 350 mm. It can be mounted on utility poles without drilling holes. 【Features】 - 60 to 350 mm - Can be wrapped around square poles for installation. Models S-1 (325 mm), S-2 (225×320 mm), and K-30 (315 mm) can accommodate dual-sided mirrors. *For more details, please download the PDF or feel free to contact us.

The Shin Ei Bussan curved mirror pole mounting bracket is an option that can be installed on round poles with diameters ranging from 100 to 370 mm using a two-sided mirror. It can also be mounted on utility poles and similar structures. 【Features】 - For diameters of 100–180 mm, 130–250 mm, and 195–370 mm - A bracket for mounting a two-sided mirror on round poles. *For more details, please download the PDF or feel free to contact us.

Shinei Bussan Curved Mirror Option [Special Bracket for Concrete Walls] This is an option for installing a small curved mirror on a wall. [Features] - Can be securely installed with anchor bolts. - Compatible with all sizes of small curved mirrors, whether single-sided or double-sided. *For more details, please download the PDF or feel free to contact us.

Shin Ei Bussan Curved Mirror Option [Includes Wall-Mounted Bracket Plate] is an option for installing a small curved mirror on a hollow wall mesh fence. [Features] - Can be installed by penetrating walls where anchors are difficult to secure, such as hollow blocks. - Can be installed by sandwiching between mesh fences or corner posts. *For more details, please download the PDF or feel free to contact us.

The curve mirror option [mirror stand] is useful when you want to use a mirror for a short period or in a simple manner. It can be easily installed with push bolts. It is suitable for safety checks at events or when you want to check while moving in factories. 〈Features〉 - The mirror can be easily installed. - It is portable. - No specialized construction work, such as digging, is required. *For more details, please download the PDF or feel free to contact us.

Curve Mirror Option [Ceiling Hanging Bracket] is a fixture used when you want to lower the mirror from the ceiling. If used upside down, it can be attached to a gate post. It can be fixed in various places using anchors or through bolts on H-beams, concrete, ceilings, etc. 〈Features〉 - Can be fixed to the ceiling with anchors, etc. - If used upside down, it can be attached to concrete gate posts, etc. *For more details, please download the PDF or feel free to contact us.

The curve mirror option [stainless steel mounting bracket] c-11 is a bracket for small curve mirrors, suitable for stainless steel and acrylic. It is ideal for those who want to use curve mirrors beautifully and for a long time, as it is made of rust-resistant stainless steel from Japan. 〈Features〉 - All components, including bolts and nuts, are made of stainless steel. - Made in Japan - Bracket for wall and post - Can be mounted on posts with a diameter of 34φ to 50.8φ. *For more details, please download the PDF or feel free to contact us.

Road Reflector Mirror Wall-Mount Bracket Option [D-1] is a bracket for installing large convex mirrors (road reflector mirrors) on walls. This option allows for the installation of road reflector mirrors (large convex mirrors) using wall surfaces in locations where it is not possible to erect a support pole. It can be installed at entrances and exits of apartments and factories, as well as on blocks, tiles, and ALC. <Features> - A bracket for mounting road reflector mirrors (large convex mirrors) on walls. - Can be installed on tiles, blocks, and ALC. - Custom sizes and adjustable angle brackets can also be manufactured (made to order). *For more details, please download the PDF or feel free to contact us.

Road Reflector Mirror Option for Utility Pole Bracket [D-2] is a bracket for installing large convex mirrors (road reflector mirrors) on utility poles or columns (200Φ to 370Φ). This option allows you to wrap the utility pole or column (200Φ to 370Φ) with a flexible band to install the road reflector mirror (large convex mirror). <Features> - A bracket for attaching road reflector mirrors (large convex mirrors) to utility poles or columns (200 to 370Φ). - It is possible to extend the flexible band. - Custom sizes and adjustable angle brackets can also be manufactured (made to order). *For more details, please download the PDF or feel free to contact us.

This is a bracket for a two-sided road mirror option. It is designed to attach a large curved mirror (road mirror) to a post, wall bracket, or utility pole bracket to create a two-sided mirror. <Features> - A bracket for attaching to posts, etc., to create a two-sided mirror. - Can be used to minimize protrusion or when extending forward. *For more details, please download the PDF or feel free to contact us.

The road reflector mirror option [front mounting bracket] is a bracket used when the projection is insufficient or needs to be reduced. It is suitable for locations with site restrictions or where the mirror is obscured by foliage depending on the season. [Features] - Can be used with poles of 76.3Φ, 89.1Φ, and 101.6Φ. - Can be installed at an angle. *For more details, please download the PDF or feel free to contact us.

The road reflection mirror option ceiling hanging bracket [D-3] is a fixture for installing large curve mirrors (road reflection mirrors). It can be installed with anchors on self-propelled multi-story parking lots, concrete eaves, or even upside down on gate posts. <Features> - It can be mounted by drilling holes in the ceiling or H-beams and using anchors, etc. - When used upside down, it can be mounted on gate posts and similar structures. *For more details, please download the PDF or feel free to contact us.

The road reflector mirror option for self-supporting fixed brackets [D-4] is a bracket for installing large curve mirrors (road reflectors). It allows for the construction of a pole in places where embedding is not possible or where a foundation cannot be installed. <Features> - Can be installed with anchors. - Can erect poles even in places where a foundation cannot be installed. - Can also be attached by drilling holes in H-beams and using bolts and nuts. *For more details, please download the PDF or feel free to contact us.

The curved mirror garage mirror mini is a small-sized mirror that provides a good reflection and is easy to install. Made of glass, it offers excellent visibility due to its convex shape, making it great for checking blind spots and ensuring safety. It is suitable for parking lot entrances and L-shaped passages. Features: - Being a glass mirror, it provides a good reflection and is highly weather-resistant, allowing for long-term use. - Shatterproof coating - It has a wide range of options available for installation without drilling holes, and it can also be mounted on fences (options sold separately). *For more details, please download the PDF or feel free to contact us.

Factory mirror catalog and case studies are currently available! Factory safety mirrors and security mirrors are made of acrylic, making them lightweight, shatter-resistant, easy to install, and adjustable in angle, which makes them very popular. Being acrylic, they are bright and ideal for indoor use. They are flexible, allowing for adjustable angles. We offer round, irregular, oval, and square shapes. *For more details, please refer to the PDF document or contact us.*

The factory entrance acrylic mirror uses a high-reflectivity acrylic mirror that is ideal for indoor use. Its long vertical and narrow horizontal shape makes it difficult to make contact. It is a safety measure to prevent contact accidents such as forklift entrapment and protrusion accidents.

The crime prevention and safety mirror [corner-specific mirror] can be easily installed on L-shaped corners using screws or magnets. It is an essential item for preventing collisions in L-shaped passages, preventing shoplifting in stores, and improving customer service. It is also used as a safety measure in offices and factories. [Features] - Installing it at L-shaped corners eliminates blind spots for both sides. - There are two types of installation methods: "screw type" and "magnet type." - It is lightweight and easy to install. - It fits perfectly in corners. *For more details, please download the PDF or feel free to contact us.

Various uses such as for security in private rooms like elevators, for store protection, and for verification in factories.

The Shin-ei Bussan factory safety and inspection mirror catalog features mirrors that are useful in various scenes within factories. It includes safety convex mirrors that help prevent collisions, full-length mirrors, and flat mirrors that reflect real images, all of which are adopted in factories, offices, and schools nationwide. *Case studies are currently available. 【Features】 - Wall-mounted and ceiling-mounted collision prevention safety mirrors - Easy-to-install collision safety mirrors with magnets - Inspection and full-length mirrors that do not distort and reflect brightly - Safe and secure curved mirrors for large truck entry and exit in factory parking lots *For more details, please download the catalog PDF or feel free to contact us.

The Shin-ei Bussan factory safety and inspection mirror catalog features mirrors that are useful in various scenes within factories. It includes safety convex mirrors that help prevent collisions, full-length mirrors, and flat mirrors that reflect real images, all of which are used in factories, offices, schools, and more across the country. *Case study collection is currently available.* 【Features】 - Wall-mounted and ceiling-mounted collision prevention safety mirrors - Easy-to-install collision safety mirrors with magnets - Non-distorting, brightly reflecting inspection and full-length mirrors - Safe and secure curved mirrors for large truck entry and exit in factory parking lots *For more details, please download the catalog PDF or feel free to contact us.*

The forklift rear confirmation wide mirror magnet is an aftermarket mirror that compensates for blind spots that are difficult to check with the original mirror, making it easier to see behind while driving. It helps eliminate blind spots when used in conjunction with the side rearview mirrors. Despite being magnetic, it is strong against bumps and there is no need to worry about it falling off. *Please handle with care as it contains a powerful magnet.

The "Half-Sphere Mirror Half" is a mirror that can be installed at intersections, allowing for simultaneous checking of both sides. It helps prevent collisions and avoid near-miss situations, and is also used as a safety mirror in mechanical multi-story parking lots to check for people's presence during operation. It is suitable for corridors at T-junctions and intersections in offices and factories. By installing it above eye level, it allows for visibility directly below and at a distance. <Features> - Made of acrylic, it is lightweight and resistant to breaking. - Excellent for checking directly below and to the sides, as well as at a distance. - Since it allows for checking from both sides, one mirror is sufficient for confirmation.

The curve mirror option "SK-21" [Fence Mount Type] is an option for Shinei Bussan's curve mirrors and garage mirrors. It can also accommodate lattice and louver-type fences, which have been frequently requested for installation, and features an easy installation that simply requires clamping.

Essential items for factories and workplaces. The collision prevention safety acrylic convex mirror is a safety mirror that helps improve safety measures and customer service in working environments such as factories, offices, and stores. It is easy to install and designed for various mounting locations, including walls, ceilings, columns, and steel frames. It is most effective indoors and lightweight, making installation simple. *For more details, please download the PDF or feel free to contact us.*

Collision prevention, shoplifting prevention, and improvement of customer service, etc. If you install them with a purpose, the effects are tremendous. I hope you find the following tips on choosing security mirrors helpful. - Why to install mirrors in stores - Convex mirrors vs. flat mirrors - Choosing based on installation location - Choosing based on visibility - Choosing based on material - Choosing based on shape *For more details, please download the catalog or contact us.*

The case study collection for factory mirrors can help prevent accidents and collisions by eliminating blind spots and improving customer service through the introduction of mirrors. Our mirrors are also being adopted by those involved in safety management and those designing factories and facilities. We have detailed drawings available, so please feel free to contact us. - For those considering safety measures - For those struggling with installation locations - For those who want to respond to customers more quickly For more details, please download the catalog PDF or feel free to contact us.

The Magical Mirror is a mysterious curved mirror that appears wide-angle despite being flat. While regular curved mirrors use a convex surface to achieve a wide field of view, the Magical Mirror provides a broad perspective while remaining flat. As a result, it can be installed at eye level without protruding, making it easier to check surroundings and enhancing safety. Additionally, by being installed lower than regular curved mirrors, it becomes easier to see small children and others. It is widely used not only in residential parking lots, condominiums, and office building parking lots but also for checking from pedestrians and bicycles. 【Features】 - Appears wide-angle despite being flat. - Minimal protrusion due to its flat design. - Less likely to compromise aesthetics due to no protrusion. - Can be installed at eye level. - Easy to install with adhesive methods (depending on the substrate).

The confirmation mirror for store operations is made of acrylic, making it lightweight and easy to install, as well as resistant to breaking, making it an essential mirror for areas with foot traffic such as stores, indoor spaces, and office corridors. The angle can be easily adjusted, and it provides a wide-angle view, allowing you to check a large area of the store. Being made of acrylic, it is bright and ideal for indoor use. It is a fixed type, so once you set the angle, it stays securely in place without wobbling. It is available in round shapes in small, medium, and large sizes. *For more details, please refer to the PDF document or contact us.*

■Glass Mirror Brightness (reflectivity) 85%, strong against weather conditions and can be used for a long time. ■Compact Lightweight and easy to install, no large-scale construction is required. It is highly effective in various situations, from general households to company entrances. ■Made in Japan We manage everything from components to materials in our own factory. We can also accommodate large orders. ■Shatterproof Processing We have measures in place in case of breakage. *For more details, please refer to the PDF document or feel free to contact us.

The hemispherical mirror half "R-100H" is a curved mirror that eliminates blind spots at intersections. With a width of approximately 1030 mm and a curvature radius of 600 mm, it reflects a wide area of blind spots and can magnify approaching objects. It is used in places where forklifts frequently operate, such as logistics centers, transportation companies, and factories. It is also ideal for walls, columns, and areas with high cargo that obstruct visibility at intersections with blind spots. - Allows for checking in both left and right directions. - Made with lightweight and bright acrylic mirror, safe in case of accidental falls. - Easy to check during the movement of forklifts and other vehicles. *For more details, please download the PDF or feel free to contact us.

The exterior mirror is a curved mirror that has a small protrusion and fits easily into the appearance. It is a stick-on type, so no mounting brackets are needed. It is ideal for rental properties where you cannot drill holes in the exterior walls, such as office parking lots. 【Features】 - Protrusion is approximately 2 centimeters. - Comes with double-sided tape. - Available in four designs. *For more details, please download the PDF or feel free to contact us.

**What is the Magical Mirror?** It is an innovative safety mirror that employs unique lens technology to ensure a wide-angle view equivalent to that of a standard convex mirror while keeping the protrusion to almost zero. **Features** - Ultra-thin design (protrusion nearly zero) - Wide-angle view: Achieves a broad field of vision like traditional convex mirrors! - Enhanced design: Harmonizes easily with exterior walls, eliminating the need for high-visibility colors like orange! - Reduced collision risk: Can be installed at eye level, improving safety! - Suitable for indoor and outdoor use: Can be widely utilized in companies, factories, apartments, parking lots, and more! *For installation inquiries or consultations, please feel free to contact us.* https://mono.ipros.com/inquiry/register/0/4556620 *For more details, please download the PDF or feel free to contact us.*

The "Forklift Gear Catalog" is a catalog aimed at the workplace that features carefully selected products that help prevent contact, ensure visibility, and enhance safety during on-site operations. It primarily includes mirrors, bumpers, visibility items, and essential safety equipment for forklift operations. The catalog is designed to reduce the effort of product selection and visualize accident risks at the workplace, leading to improvements. It is utilized in many logistics warehouses, manufacturing plants, commercial facilities, and construction sites. For more details, please download the PDF or feel free to contact us.