ダイコー Product Lineup

"Polyvinyl Chloride (PVC)" is a widely used material among general-purpose plastics. Through years of research, it has been further lightweighted, and it has many advantages such as chemical resistance, weather resistance, and flame retardancy, making it suitable for use in decorative materials, plumbing, signage, and more. Additionally, due to its excellent cost-effectiveness and durability, it is used in a wide variety of fields. 【Features】 ■ Plasticity ■ Hardness can be freely changed by adding chemicals, allowing for various applications ■ High durability and weather resistance, suitable for outdoor use ■ Excellent chemical resistance and flame retardancy ■ Good cost performance and low price ■ Maximum operating temperature: 65°C (varies depending on usage conditions) *For more details, please refer to the PDF document or feel free to contact us.

The "SGM Soft Teflon Gasket" is a revolutionary non-asbestos joint sheet gasket made of 100% PTFE, featuring excellent heat resistance and chemical resistance, as well as a combination of strength and flexibility. It possesses the required characteristics for gaskets in a well-balanced manner at a high level, allowing for versatile use without the need to differentiate gaskets for each process. 【Features】 ■ Excellent adaptability, easily sealing even on slightly uneven surfaces ■ Strong against stress fluctuations, providing stable sealing performance over a long period ■ Has the highest level of strength among non-asbestos joint sheets ■ Minimal creep relaxation, allowing for stable use over a long period even at the upper limit of the usable temperature *For more details, please refer to the PDF materials or feel free to contact us.

At Daiko Co., Ltd., we handle a variety of "Teflon-based gaskets." The "pure Teflon" is a gasket made from punched Teflon (PTFE). It has excellent chemical resistance and also features outstanding electrical insulation properties. In addition, we offer products such as "Teflon sand," which uses a heat-resistant millboard as the core material and has PTFE as the outer layer, providing excellent elasticity and flexibility, as well as "filled Teflon" and "soft Teflon." 【Features】 < Pure Teflon > ■ Gasket made from punched Teflon (PTFE) ■ Excellent chemical resistance and electrical insulation ■ Operating temperature range: -50 to 100℃ ■ Maximum operating pressure: 1MPa (10kgf/cm²) *For more details, please refer to the PDF document or feel free to contact us.

The Daiko D7000-ST is a PTFE sealing tape that can withstand temperatures from -100°C to 260°C. It is particularly suitable for sealing high-temperature areas and can be used with acids, alkalis, and chemicals, allowing for a clean and easy application without getting your hands dirty. Additionally, PTFE is a self-lubricating non-stick material, making it easy to screw in and remove without causing seizing. 【Features】 ■ Extremely easy to attach and detach ■ Improves work efficiency ■ Not affected by the fluid used, and does not cause contamination ■ Operating temperature: -100 to 260°C *For more details, please refer to the PDF document or feel free to contact us.

This catalog features products from Daiko Co., Ltd., which manufactures and sells various types of gaskets and industrial products. Our company processes gaskets and packing using a variety of machines, including one of Japan's largest water jet cutting machines. We also have a wide range of items such as joint sheets, rubber, sponge, and resins. Our original brand, the non-asbestos joint sheet "D-6000," is among our well-developed products. 【Featured Products】 ■ Non-asbestos Joint Sheet D-6000 ■ Graphite Spiral Gasket D-1000 ■ Teflon Cushion Gasket D-7000 ■ SGM Soft Teflon Gasket ■ Rubber Packing, etc. *This PDF is a digest version. Please feel free to contact us if you need the full version.

This catalog is a comprehensive catalog (digest version) featuring products from Daiko Co., Ltd., which manufactures and sells various types of gaskets and industrial products. Our company processes gaskets and packing using a variety of machines, including one of Japan's largest water jet cutting machines (hydro-cutting machines). We also have a wide range of items, including joint sheets, rubber, sponge, and resins. Our original brand, the non-asbestos joint sheet "D-6000," is among our well-developed products. Please utilize the fluid compatibility tables and necessary information for selecting piping and valves! 【Featured Products (Partial)】 ■ Non-asbestos joint sheet D-6000 ■ Graphite spiral wound gasket D-1000 ■ Teflon cushion gasket D7000 ■ SGM soft Teflon gasket ■ Rubber packing, etc. *This PDF is a digest version. If you need the full version, please feel free to contact us.

This catalog is a comprehensive catalog (digest version) featuring products from Daiko Co., Ltd., which manufactures and sells various types of gaskets and industrial products. Our company processes gaskets and packing using various machines, including one of Japan's largest water jet cutting machines (hydro cutting machines). We have a wide range of items, including joint sheets, rubber, sponge, and resins. We also offer our original brand non-asbestos joint sheet "D-6000" and other products tailored to domestic manufacturers such as Nichias and Bulker. Please utilize the fluid compatibility charts and necessary information for selecting piping and valves! 【Featured Products (Partial)】 ■ Non-asbestos joint sheet D-6000 ■ Graphite spiral wound gasket D-1000 ■ Teflon cushion gasket D7000 ■ SGM soft Teflon gasket ■ Rubber packing, etc. *This PDF is a digest version. If you need the full version, please feel free to contact us.

〇 Processing Features - This machine tool was developed for applications that perform machining impossible with conventional blades or cutting tools by utilizing laser light for cutting and machining. Since it processes without contact, the material does not deform due to stress or pressure during machining. By linking with image processing software and directly transferring data to the machining machine, the process of creating molds or casts, which was previously necessary, is eliminated, allowing for a variety of machining options. 〇 Processing Range - 1200W x 2400L 〇 Product Examples - Metal products (gaskets, packing) - Resin products (acrylic, etc.) - Wood products *Various material test machining is possible.

We would like to introduce the "resin products" that we handle. Our lineup includes "polyvinyl chloride," which excels in both cost and durability, "acrylic," which offers a balance of transparency and impact resistance, and "polycarbonate," which has top-class impact resistance among plastics. Additionally, we also offer "glass fiber epoxy resin," which possesses many excellent properties such as high strength, electrical insulation, heat resistance, and chemical resistance. 【Product Lineup】 ■ Polyvinyl Chloride ■ Acrylic ■ Polycarbonate ■ Monomer Cast Nylon ■ Glass Fiber Epoxy Resin ■ Polyoxymethylene (POM) Resin *For more details, please download the PDF or feel free to contact us.

The "MG Board" is an insulation material that excels in thermal insulation and sound absorption. It is made by adding heat-curing resin as a binder to rock wool and forming it into board shapes, available in JIS grades 1 to 3. Additionally, the surface material of MG Board 080 is treated with ALGC (aluminum glass cloth). 【Features】 ■ Excellent thermal insulation and sound absorption ■ Lightweight and highly flexible, making it easy to handle and process ■ Excellent heat resistance ■ Greatly contributes to energy conservation due to its superior insulation properties ■ Designated as a recycling wide-area contractor *For more details, please download the PDF or feel free to contact us.

The "MG Mighty Cover" is a thermal insulation tube that is lightweight, resistant to bending, and has excellent thermal insulation, heat resistance, and non-combustibility. It has low halogen content, making it excellent for preventing stress corrosion cracking in stainless steel. Please feel free to contact us when you need assistance. 【Features】 ■ Snap-on type for excellent installation workability ■ Uses rock wool as the base material ■ Possesses excellent thermal insulation performance and heat resistance ■ Non-combustible material ■ Products with ALGC coating on the exterior are also available *For more details, please download the PDF or feel free to contact us.

"I want to respond with higher reliability in piping lines that handle utility lines such as steam and oil at temperatures above 100°C, as well as chemical substances. I need gaskets that have excellent long-term stability and minimal creep (deformation) even under high temperatures." In extremely harsh environments such as chemical plants, semiconductor manufacturing, and pharmaceutical processes, there are situations where the performance of standard fluoropolymer (PTFE) gaskets falls short. To meet these top-level demands, Vulcan Corporation has developed the flagship model of high-performance fluoropolymer gaskets, "No.GF300," by consolidating years of sealing technology. This article will thoroughly explain why the GF300 is referred to as the "pinnacle," from its unique material technology that supports its performance to important precautions for safe use, from a professional perspective. *For detailed content of the column, please refer to the related link. For more information, please download the PDF or feel free to contact us.*

In ensuring the stable operation and safety of plants, the selection and handling of gaskets, which are sealing materials for piping flange sections, play an extremely important role. Among the diverse range of products available, this time we will focus on the fluoropolymer (PTFE) gasket "TOMBO No.9007-LC," which combines excellent chemical resistance with groundbreaking low creep characteristics, and thoroughly explain its details. This article aims to assist field engineers and maintenance personnel in solving the challenges they will face in their work starting tomorrow, delving deeply into practical aspects from the product features to the "precautions" that must be observed on-site. *For detailed content of the column, you can view it through the related links. For more information, please download the PDF or feel free to contact us.

We would like to introduce a case where we created original bookmarks from stainless steel and plastic sheets at the request of a customer. First, we precisely cut the shape of the bookmark using a laser cutting machine, and then we clearly engraved the specified text and design using a laser marker. By handling everything from cutting to marking in a consistent manner, we can produce high-quality original goods. If you have requests such as "I want to create an original bookmark" or "I want to engrave a name on a commemorative item," please feel free to consult with us. 【Case Overview】 ■ Material: Stainless steel and plastic sheets ■ Product: Original bookmarks ■ Work Details ・Precise cutting of the bookmark shape using a laser cutting machine ・Clear engraving of the specified text and design using a laser marker *For more details, please download the PDF or feel free to contact us.

We would like to introduce a processing example of producing mats and partitioning materials measuring 440mm × 1800mm from flexible polyvinyl chloride resin (2mm thick) that excels in flexibility and transparency. Flexible transparent PVC is a type of polyvinyl chloride resin that has been made flexible by adding plasticizers, combining high transparency and toughness. It is stable against acids, alkalis, and fats, making it resistant to degradation even in factory environments. The processing details include eight small diameter holes of φ3mm and specified slit processing. Using our plotter processing machine, we achieved high-precision cuts directly from CAD data without moving the material. 【Case Overview】 ■ Material: Flexible transparent PVC 2mm ■ Size: 440mm × 1800mm ■ Processing Details: Eight φ3mm small diameter holes, slit processing *For more details, please download the PDF or feel free to contact us.

From semiconductor manufacturing equipment to chemical plants and electrical insulation applications. As a reliable piping material in harsh environments, "TOMBO No.9003 Naflon PTFE Tube" has been chosen for many years. In the new semiconductor processes, ultra-high-performance grades like "PFA-UG" have also emerged, but for general industrial applications, the "PTFE Tube" still offers the best balance of cost and performance. We will thoroughly explain its specifications and reasons for being chosen. *For detailed content of the column, you can view it through the related link. For more information, please download the PDF or feel free to contact us.*

"I want to reduce the particles (micro-particles) in the chemical solution to the absolute minimum." "I want to shorten the piping cleaning (flushing) time and speed up the startup." "Since we use harsh chemicals, we need high durability." In the fields of semiconductor and liquid crystal manufacturing, where nano-level precision processing is required, the specifications demanded for piping tubes are becoming increasingly stringent year by year. The "TOMBO No.9003-PFA-HG Naflon PFA-HG tube" from Nichias meets these advanced requirements that cannot be achieved with standard PFA tubes. Why is it called "HG (High Grade)?" Let's unravel its overwhelming specifications. *For detailed content of the column, please refer to the related link. For more information, please download the PDF or feel free to contact us.*

In the design of industrial machinery and analytical instruments, selecting the right materials for "covers" and "windows" to ensure internal visibility is crucial. Glass poses a risk of breaking and is too heavy, while polycarbonate does not fit the budget. In such cases, "acrylic resin (PMMA)" becomes a balanced option. This time, we will introduce three technical features that make acrylic suitable for industrial equipment, as well as precision processing services provided by Daiko Co., Ltd. *For detailed content of the column, you can view it through the related links. For more information, please download the PDF or feel free to contact us.*

There are many types of plastic materials, but nothing surpasses "polyvinyl chloride (PVC)" in terms of cost-performance balance. From water pipes to industrial tanks and building materials. Why is PVC still chosen so consistently? Here, we will explain five technical features that are supported in design and construction. *For more detailed information, you can view the related links. For further details, please download the PDF or feel free to contact us.*

When selecting plastic materials, have you ever faced the challenge of wanting "transparency to see the contents, but being afraid of breaking with glass or acrylic"? A suitable answer is polycarbonate (PC). In this article, we will explain polycarbonate, which boasts top-class impact resistance among engineering plastics, including its incredible strength, advantages and disadvantages, and points to note during processing. *For detailed content of the column, please refer to the related links. For more information, please download the PDF or feel free to contact us.*

"Nylon (Polyamide)" is widely used as an engineering plastic with excellent wear resistance and heat resistance, ranging from automotive parts to everyday goods. However, are you accurately understanding and selecting the differences between the representative grades "Nylon 6 (PA6)" and "Nylon 66 (PA66)"? In this article, we will explain the two decisive differences (heat resistance, water absorption, impact strength) as well as "plant-based Nylon 11" and "low water absorption Nylon 12," which have recently attracted attention as 3D printer materials. *For detailed content of the column, you can view it through the related links. For more information, please download the PDF or feel free to contact us.