サンツール List of Products and Services

The "Spiral Spray" is a method of applying hot melt in a spiral fiberized form onto the substrate. It achieves beautiful spiral application with minimal scattering, regardless of low or high speeds. It is also possible to apply using a foaming machine for foamed spirals. 【Features】 ■ Soft finish with a pleasant texture and breathability ■ Reduces waste/loss of hot melt adhesives ■ Solvent-free/low-solvent for environmental/recycling measures ■ High-speed intermittent adhesion is possible. The spiral can accommodate up to 72,000 rotations per minute, with a width of approximately φ15–20mm. 【Features of the nozzle with secondary air】 ■ The guide air stabilizes the pattern, and the clean air protects the nozzle, significantly reducing maintenance without foreign matter adhesion. ■ Spiral application of high-viscosity hot melts, which was difficult with conventional methods, is now possible. * For more details, please refer to the PDF document or feel free to contact us. 【Applications/Examples of Achievements】 ■ Non-woven fabrics ■ Films ■ Filters

The "Curtain Spray" is a device that utilizes the cohesive force and viscosity of hot melt (adhesive) to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can also spray apply in one piece over a wide width. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability ■ Cost benefits through reduced usage of hot melt (adhesive) ■ Compatible with adhesives from high viscosity to low viscosity ■ Even application weight, beautifully coated uniformly ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Seals ■ Filters ■ Films ■ Spray lamination ■ Non-woven fabrics

This is a method for applying hot melt adhesive in a uniform width, over a surface, or in stripes. There are methods for applying it under tension between rolls and on-roll application, which can be continuous or intermittent (partial application) depending on the purpose. 【Features】 ■ Coater head for contact-type application ■ The application pattern can be arbitrarily set according to the shim pattern. ■ High-speed intermittent adhesion is possible, accommodating adhesives from high viscosity to low viscosity. ■ Beautiful coating with thin film adhesion. ■ There are measures to prevent winding during application and to address clumping of hot melt adhesives (using hot air). * For more details, please download the PDF or feel free to contact us.

The "Pattern Coat (Design Coat)" is a partial surface coating device. It enables clean pattern formation without stringing even at high speeds. The relief printing method allows for coating only in necessary areas, ensuring precise and fine characters and designs are reliably transferred. Additionally, since it uses hot melt adhesive for transfer, no drying process is required. 【Features】 ■ No drying process required. ■ Coating possible only in necessary areas. ■ Precise and fine characters and designs are reliably transferred. ■ Achieves clean patterns without stringing even at high speeds. ■ Partial coating, partial surface coating device. * For more details, please refer to the PDF document or feel free to contact us. 【Specifications】 ■ Pattern roll width: Max 500mm ■ Line speed: Max 200m/min ■ Coating thickness: 5 to 50 microns ■ Operating temperature: Room temperature to 200℃ 【Applications/Examples of Achievements】 * For more details, please refer to the PDF document or feel free to contact us.

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ In addition to beads, surface coating is also possible, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

**Features** - Provides high adhesive performance - Offers high retention power in the stretchable parts of thread rubber, reducing thread pull-out - Compatible with high-speed application and high-speed intermittent application - Adhesive capability from high viscosity to low viscosity - Structure that reduces lateral movement of hot melt adhesives - Accommodates knots and joints of materials such as threads, allowing for continuous application and minimizing material loss - Thoroughly coats all around - Reduces the amount of hot melt adhesive used *For more details, please download the PDF or feel free to contact us.* **Applications/Examples of Use** - Hygiene materials - Full circumference coating on thread-like materials - High-speed intermittent application

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

We offer nozzles ranging from Φ0.2 to Φ2.0. *Other special items are also available. 【Features】 ■ Compatible with adhesives from high viscosity to low viscosity ■ Capable of high-speed intermittent adhesion ■ Ideal for line drawing (bead) and dot pattern applications ■ Capable of multi-line intermittent coating ■ Allows for precise and stable coating with extremely fine pitch ■ Reduces product waste and improves productivity *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Filling ■ Molding ■ Filters ■ Automotive parts ■ Refrigerators ■ Building materials ■ Packaging ■ Bookbinding

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of foaming ratio. ■ Unique design by Santool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ Enables surface coating in addition to bead application, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

【Sample Distribution】We are currently distributing application samples. Please check the end of the article for details. The 'CF Series (Foam-Compatible Type)' is a touch panel type melter (applicator). Foam expansion ratios can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foam expansion ratios from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types 【Lineup】 ■ CF08 ■ CF30 ■ CF60 ■ CF120 【Applications/Examples of Achievements】 *For more details, please refer to the PDF materials or feel free to contact us. For a limited time, we will send application samples only to companies that inquire! Please feel free to contact us!

【Sample Distribution】We are currently distributing coating samples. Please check the end of the article for details. The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It allows for seamless and even application on wide materials, which is difficult with conventional spray coating, and also enables thin application. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials industries. *Uniform microparticle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Capable of uniform application of a small amount of hot melt ■ Excellent coating with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to coating ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. For a limited time, we will send coating samples only to companies that inquire! Please feel free to contact us!

The "S100NA" is a module that is optimal for applying bead patterns. It features a valve that opens and closes to discharge and stop the hot melt sent from the hose. It is suitable for intermittent application of hot melt and is used in various industrial machines. It is compatible with products from other manufacturers, making it easy to replace. 【Features】 ■ Intermittent application ■ Optimal for bead pattern application ■ Achieves precise intermittent patterns ■ Compatible with products from other manufacturers ■ Allows for intermittent application without stringing due to zero cavity ■ Adjustable discharge volume with the needle's up and down adjustment mechanism 【Applications / Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators ■ Building materials ■ Everyday goods *For more details, please download the PDF or feel free to contact us.

The "S100SP" is a compact type gun module for spiral applications. It features an open/close valve for the discharge and stop of hot melt sent from the hose. It is suitable for continuous/intermittent application of hot melt and is used in various industrial equipment. It is compatible with products from other manufacturers, making it easy to replace. 【Features】 ■ Compatible with other manufacturers' products ■ Continuous/intermittent application ■ Ideal for spiral spray pattern application *For more details, please download the PDF or feel free to contact us. 【Applications / Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators

The S100 is a compact standard-type gun module. It is a shut-off valve that controls the discharge and stop of hot melt sent from the hose. It is suitable for continuous application of hot melt and is used in various industrial equipment. It is compatible with products from other manufacturers, making it easy to replace. 【Features】 ■ Compatible with other manufacturers' products ■ Reasonably priced standard type for continuous coating * For more details, please download the PDF or feel free to contact us. 【Applications / Examples of Use】 ■ Diapers ■ Napkins ■ Filters ■ Automotive parts ■ Refrigerators

The "PL1" is a circulation-type gun module. It is suitable for continuous application of hot melt and is used in various industrial machines. 【Features】 ■ Gun module for continuous application ■ The return mechanism within the gun module allows the hot melt to circulate, stabilizing internal pressure even when the line is stopped, preventing insufficient internal pressure or pressure buildup at startup. * For more details, please download the PDF or feel free to contact us. 【Applications / Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators

By applying hot melt adhesive through high-speed transfer coating, patterns that were impossible with intermittent application using electromagnetic valves (solenoid valves) can be achieved! 【Features】 ■ High-speed intermittent coating: Allows for multiple applications relative to product length. ■ Low-temperature application: Reduces the temperature of the roll to prevent thermal damage to materials. ■ Low application weight: Enables low application weight by utilizing protrusions for coating. ■ Applicable to films and non-woven fabrics. ■ Use of iron roll plates: Allows for coating of curves, text, and dot patterns by engraving on iron rolls. *For more details, please download the PDF or feel free to contact us. 【Applications / Examples of Achievements】 ■ Non-woven fabrics ■ Films ■ Filters ■ Labels ■ Business form printing

The "PLW-2" is a circulation-type gun sack back module. It is suitable for intermittent application of hot melt and is used in various industrial equipment. 【Features】 ■ Generates negative pressure during OFF periods of intermittent operation, reducing dragging and stringing. ■ The return mechanism within the gun module circulates the hot melt, stabilizing internal pressure even when the line is stopped, preventing insufficient internal pressure or pressure buildup at startup. *For more details, please download the PDF or feel free to contact us. 【Applications / Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators

【Features】 ■ Various coatings are possible with head replacement ■ Simple mechanism for easy maintenance ■ Enhanced convenience with a wide range of options ■ Available for reactive hot melt (DP300P) ■ Compatible with adhesives from high viscosity to low viscosity ■ Commonly used for bonding and filling small boxes ■ Systems can also be manufactured for integration with robots ■ Weight: 3KG (DP300) * For more details, please download the PDF or feel free to contact us. * Options - Aluminum can preheater 【Applications/Examples】 ■ Packaging of small boxes ■ Coating on circuit boards ■ Electronic components

The "SB2" is a high-speed response type gun module that excels in the cutting performance of hot melt due to its sack-back mechanism. It is suitable for high-speed intermittent application of hot melt and is used in various industrial equipment. Additionally, it boasts excellent durability, with a proven track record of over 100 million open/close cycles. 【Features】 ■ High durability ■ Ideal for high production intermittent application ■ Reduced downtime ■ Lower running costs *For more details, please download the PDF or feel free to contact us. 【Applications / Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators

The "GB2000" is a gun module suitable for continuous application of spiral patterns. It allows for the application of different patterns with varying melt linearity simply by changing the nozzle. With a one-module, two-nozzle design, it can apply finer and denser patterns compared to our conventional product (S100SP), making it suitable for use in many industrial applications. 【Features】 ■ Continuous/Intermittent coating ■ Capable of creating fine and dense spiral patterns without gaps *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Filters ■ Automotive parts ■ Refrigerators

The "SB-2530-C" is a compact gun module with a sack-back mechanism that excels in the cutability of hot melt adhesives and features a high-speed response type. It is suitable for high-speed intermittent application of hot melt in slot coaters and is used in various industrial equipment. 【Features】 ■ High durability ■ Ideal for high production intermittent application ■ Reduced downtime ■ Lower running costs ■ Achieves high-speed and precise intermittent patterns *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators

The SB-2530-Z is a compact gun module of a high-speed response type that excels in the cutability of hot melt due to its sack-back mechanism. Various spray patterns (random, fiber, etc.) can be achieved simply by changing the nozzle. It is suitable for high-speed intermittent application of hot melt adhesives and is used in various industrial equipment. 【Features】 ■ High durability ■ Ideal for high production intermittent application ■ Reduced downtime ■ Lower running costs ■ Optimal for spray patterns (random, fiber, etc.) ■ Achieves high-speed and accurate intermittent patterns *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Diapers ■ Napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators

The "SB-2530-S" is a compact gun module with a sack-back mechanism that excels in the cutability of hot melt adhesives and features a high-speed response type. It is suitable for high-speed intermittent application of hot melt and is used in various industrial equipment. 【Features】 ■ Equipped with high durability, contributing to reduced running costs ■ Ideal for high production intermittent application, achieving high-speed and accurate intermittent patterns ■ Reduced downtime ■ Optimal for spiral spray pattern application *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Home appliances ■ Daily necessities

The hot melt supplied from the pump is transferred to the application gun unit at a constant temperature. It is compatible with various types of sensors and can be used with hoses from other manufacturers, making it suitable for a variety of industrial equipment. 【Features】 ■ Compatible with various sensors: PT/CA/IC ■ Maximum pressure: 10MPa *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Constant temperature transfer of hot melt adhesive

"Light Horse" is an energy-saving heating hose that reduces power consumption and has a high heat retention effect. It is a flexible hose that maintains the set temperature for transporting hot melt, combining high flexibility. Compared to our conventional product (2000 series hose), it achieves approximately 30% reduction in power consumption (compared to our products) and is adopted by many companies. 【Features】 ■ Approximately 30% reduction in power consumption ■ Reduces running costs through energy savings, contributing to the environment! ■ Compatible with various sensors: PT/CA/IC *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Constant temperature transport of adhesives such as hot melt

The "WAVE nozzle" is a non-contact, compact spray nozzle. By forming a coating pattern with overlapping thick lines, it achieves stronger adhesion. It has minimal hot melt scattering and excellent maintainability, making it suitable for various industrial equipment. 【Features】 - Reduces air consumption compared to curtain spray coating. - Capable of maintaining strength with thick lines. - Easy maintenance and excellent maintainability due to the ability to replace individual nozzles (25mm width). - Cost-effective, reduces running costs, and decreases maintenance labor. *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 - Diapers - Napkins - Breast pads - Filters - Automotive parts - Refrigerators - Building materials

The "TSM-G3/G4" is a non-contact small spiral spray nozzle. By forming a spiral pattern, it allows for thinner application. With a two-nozzle module design, it can apply a finer and denser pattern compared to our conventional products (TSM, TSF nozzles), making it suitable for many industrial applications. The secondary air protects the nozzle, preventing clogging from hot melt or paper dust, and minimizes air interference between nozzles, enabling uniform pattern application. 【Features】 - Capable of creating a fine and dense spiral pattern without gaps - Compatible with high-viscosity hot melt adhesives - Stable pattern with secondary air, providing a uniform and beautiful coating - Reduces maintenance labor and has excellent maintainability - Cost-effective, reduces downtime, and improves production efficiency *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 - Diapers - Sanitary napkins - Breast pads - Filters - Automotive parts - Refrigerators - Building materials

The "RBT Hose" is a heating hose designed for use in robotic devices and movable parts, with enhanced durability. The heating hose serves as a pipe that delivers pressurized hot melt to the application head. 【Features】 ■ Excellent durability *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Transporting hot melt adhesives and similar materials.

The "TSM" is a non-contact small spiral spray nozzle. By forming a spiral pattern, it allows for thinner application. Protecting the nozzle with secondary air significantly reduces maintenance frequency and improves productivity, making it widely used in various industrial machines. The protection from secondary air prevents nozzle clogging due to hot melt or paper dust, allowing for uniform application with minimal air interference between nozzles. 【Features】 ■ Compatible with high-viscosity hot melt adhesives ■ Stable pattern with secondary air, providing a beautiful and uniform coating ■ Reduced downtime and improved production efficiency ■ Reduced maintenance labor and excellent maintainability *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators ■ Building materials

The "TSF" is a non-contact small spiral spray nozzle. By forming a spiral pattern, it allows for thinner application. Protecting the nozzle with secondary air significantly reduces maintenance frequency and improves productivity, making it widely used in many industrial machines. The protection from secondary air prevents nozzle clogging due to hot melt or paper dust, allowing for uniform application with minimal air interference between nozzles. 【Features】 ■ Compatible with high-viscosity hot melt adhesives, stable patterns with secondary air ■ Uniform and beautiful coating, excellent maintainability ■ Cost-effective, reduces downtime ■ Improved production efficiency, reduced maintenance labor *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Diapers ■ Sanitary napkins ■ Breast pads ■ Filters ■ Automotive parts ■ Refrigerators ■ Building materials

The "bead nozzle" is a small nozzle suitable for applying thin lines (beads) and dot applications. It is manufactured with high precision, allowing for extremely low variation between nozzles even in multi-line applications, enabling stable coating, which is why it is used in many industrial machines. By bringing the nozzle closer to the substrate, high-cut multi-line intermittent application is also possible. 【Features】 - Ideal for line (bead) and dot patterns, capable of multi-line intermittent application - Achieves stable coating, providing a uniform and beautiful finish - Reduces product waste, improves productivity, and offers cost benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 - Filling - Molding - Filters - Automotive parts - Refrigerators - Building materials - Packaging - Bookbinding

The "NT Nozzle" is a compact nozzle suitable for applying thin lines (beads) of coating. It is manufactured with high precision, allowing for extremely low variation between nozzles even in multi-line applications, making it stable for use in many industrial machines. 【Features】 ■ Optimal for line drawing (bead) patterns, capable of responding to arbitrary patterns ■ Enables precise coating with extremely fine pitch, achieving stable application ■ Reduces product waste, improves productivity, and offers cost benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Filling ■ Molding ■ Filters ■ Automotive parts ■ Refrigerators ■ Building materials ■ Packaging ■ Bookbinding

The "Comb Head Knot Passing Specification (for Round Rubber)" is a nozzle designed for thread rubber adhesive that detects and controls the direction of knots, allowing them to pass through and thus enabling the continuous application of hot melt adhesive. By allowing the knots of thread rubber to pass without breaking, it contributes to reducing product loss and improving productivity. Additionally, it can apply with minimal adhesive quantity, making it suitable for various industrial equipment. 【Features】 ■ For round rubber, 3-piece construction, continuous/intermittent application ■ Achieves a soft texture, coating uniformly and beautifully ■ Reduces downtime, increases productivity ■ Contributes to reducing hot melt usage, aiding environmental conservation ■ Cost-effective benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Diapers ■ Napkins ■ Nylon ■ Synthetic fibers

The "Comb Head for Flat Rubber Compatible Specification" is our standard type nozzle for adhesive application on flat rubber. It is designed for flat rubber heads, applying hot melt adhesive to the outer circumference of elastic rubber. By using a high-speed intermittent gun module and a high-speed solenoid valve, it excels in intermittent application and cutting performance, making it suitable for various industrial equipment. 【Features】 ■ For flat rubber ■ Two-piece construction ■ Continuous/intermittent application ■ Achieves a soft texture ■ Uniform and beautiful coating *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Diapers ■ Sanitary napkins

The "Comb Head Knot Passing Specification (for Flat Rubber)" is a nozzle for adhesive application of thread rubber that detects and controls the direction of knots, allowing them to pass through and thus enabling the continuous application of hot melt adhesive. By allowing the knots of thread rubber to pass without breaking, it contributes to reducing product loss and improving productivity. Additionally, it can apply with minimal adhesive amount, making it suitable for various industrial equipment. 【Features】 ■ For flat rubber, two-piece structure, continuous/intermittent application ■ Achieves a soft texture, coating uniformly and beautifully ■ Reduces downtime, increases productivity ■ Contributes to reducing hot melt usage, aiding environmental conservation ■ Cost-effective benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Diapers ■ Sanitary napkins

The "Line Pump Gun Unit" is a gun unit equipped with a motor and gear pump. It excels in the responsiveness and stability of hot melt quantities during acceleration and deceleration on the production line. By quickly securing the internal pressure necessary for the required discharge amount, it reduces product waste and improves productivity, making it widely used in various industrial machines. 【Features】 ■ Stable supply of melt, ensuring the required amount linearly ■ Reduced downtime, improved production efficiency ■ Reduction of product waste, contributing to environmental conservation ■ Cost-effective benefits *For more details, please download the PDF or feel free to contact us.

The "Relay Manifold Unit" is a unit equipped with a motor and gear pump. It excels in the responsiveness and stability of hot melt quantities during acceleration and deceleration on production lines. By quickly securing the internal pressure necessary for the required discharge amount, it reduces product waste and improves productivity, making it widely used in many industrial machines. By installing it between the gun unit and the melter, it is possible to reduce the number of tanks and hoses, as well as shorten hose lengths. 【Features】 ■ Stable supply of melt ■ Linear securing of required amounts ■ Reduced downtime ■ Reduced product waste ■ Contribution to environmental conservation ■ Cost benefits ■ Improved production efficiency *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Diapers ■ Sanitary napkins ■ Breast pads

The "Comb Head" is our standard type nozzle for adhesive application of thread rubber. It is a nozzle for round rubber that applies hot melt to the outer circumference of the thread rubber. By using a high-speed intermittent gun module and a high-speed solenoid valve, it excels in intermittent application and cutting performance, making it suitable for various industrial equipment. 【Features】 ■ For round rubber ■ 3-piece construction ■ Continuous/intermittent application ■ Achieves a soft texture ■ Uniform and beautiful coating *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Diapers ■ Napkins ■ Nylon ■ Synthetic fibers

The "HB GUN Hybrid Gun" is a gun module that can simultaneously discharge two types of hot melt adhesives at nearly the same timing. It allows for a reduction in hot melt usage, solvent-free application, and improvements in adhesive strength, heat resistance, and weather resistance, making it a candidate for introduction into many industrial machines. 【Features】 ■ Cost benefits ■ Reduction in hot melt usage ■ Improved adhesive strength, heat resistance, and weather resistance ■ Shortened reaction time ■ Extended open time ■ Reduced running costs ■ Solvent-free application ■ Contribution to environmental conservation ■ Transition from temporary adhesives to structural adhesives *For more details, please download the PDF or feel free to contact us.

The "2020 Hose" is a heating hose that is compatible with hoses from other manufacturers, featuring excellent pressure resistance and heat resistance. It is a flexible hose that maintains the set temperature for transporting hot melt, while also offering high flexibility. Due to its compatibility with other hoses, ease of replacement, and low cost, it is adopted by many companies. 【Features】 ■ Compatible with other manufacturers ■ Supports various sensors: PT100/Ni120 ■ High pressure resistance: φ8: MAX 80Mpa, φ13: MAX 60Mpa ■ High heat resistance: MAX 230℃ *Special high heat resistance hoses are also available *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Constant temperature transport of adhesives such as hot melt

The "Tank Filter (for CV15S/15SS/45S/45SS)" is a filter for tanks. It is installed in small-capacity tanks of the CV series and is adopted in many systems. 【Features】 ■ Installed in small-capacity tanks of the CV series ■ Capable of filtering carbides ■ Prevents carbide contamination in hoses *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Filtering carbides in the tank ■ Preventing foreign matter from entering the pump interior

The "Inline Filter" is a simple filter that can be installed inside a hose nipple. Due to its simplicity and compact design, it is suitable for use in testing and small devices, and it is adopted in many systems. 【Features】 ■ Compact design ■ Capable of filtering carbides ■ Prevents carbide contamination in gun units ■ Can be installed inside a hose nipple ■ Ideal for use in small devices and testing equipment *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Filtering carbides in hoses

The "Filter Core (with Purge Valve)" is a filter that can be mounted on gun units. The filter and the fixing block are integrated, making it easy to attach and detach, which is why it is adopted in many systems. 【Features】 ■ Equipped with purge valve ■ Capable of filtering carbides ■ Prevents carbide contamination in gun units *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Filtering of carbides within gun units

The "Double Filter for Guns (Internal Path Integrated)" is a type of filter that is fixed using a SUP seat/spring seat (retaining hardware). It is widely adopted as a filter for gun units in many systems. 【Features】 ■ Filter fixed with SUP seat/spring seat (retaining hardware) ■ Capable of filtering carbides ■ Prevents carbide contamination in gun modules, gun heads/nozzles ■ Can be mounted within the gun unit *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Filtration of carbides within the gun unit