大阪高波 List of Products and Services

A "switching power supply transformer" is an important electronic device that significantly influences the performance of switching power supplies, alongside semiconductor devices. Its performance has a substantial impact on the high performance of power supplies. The performance of this transformer is determined by the magnetic materials used in it, which are generally referred to as ferrite (iron powder) magnetic materials. Due to their compact size and low cost, switching power supply transformers are used in household appliances such as inverter air conditioners, DVD players, and LCD TVs, and they are expected to be adopted in a wide range of electronic devices in the future. 【Features】 ■ Compact and lightweight design ■ Can operate at various voltage levels and frequencies, making it suitable for a wide range of applications ■ Operates in temperature ranges that are difficult for conventional transformers ■ Suitable for high-performance electronic systems *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers

The "high-frequency transformer" is a product designed to be compact and lightweight due to its small core and wire sizes. Operating at higher frequencies results in lower power loss and greater efficiency. With reduced V/I losses, less energy is lost as heat, minimizing waste and cutting costs. Additionally, it can operate more quickly and accurately, making it suitable for high-performance electronic systems. Its excellent separation and noise suppression functions enhance overall performance. 【Features】 ■ Compact and lightweight design ■ Capable of operating at various voltage levels and frequencies, making it versatile for a wide range of applications ■ Operates in temperature ranges that are difficult for conventional transformers ■ Suitable for high-performance electronic systems *For more details, please feel free to contact us.

• Transformers

The "WB Transformer" is a newly conceived transformer that incorporates a no-cut iron core into a newly developed coil bobbin. By developing a coil bobbin and iron core winding device, we have achieved efficiency and stability in the winding, insulation processing, and iron core winding operations. It is an ecological transformer that promotes resource conservation and energy efficiency. 【Features】 ■ Compact, lightweight, and thin ■ High reliability ■ Fully utilizes iron core performance ■ No cuts or gaps in the iron core ■ Uses coil bobbin *For more details, please refer to the PDF document or feel free to contact us.

• transformer

"FFX" is a transformer that uses a ferrite core. Models "ER-28L-BZ," "ER-35-BZ," and "ER-40-BZ" are available in the lineup. They are suitable for switching power supplies. Additionally, we offer a wide variety of options to meet diverse needs. We also have a range of special sizes available, so please feel free to consult with us. [Features] ■ Uses a ferrite core ■ Suitable for switching power supplies ■ Wide variety of options ■ A diverse range of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

"FVX" is a transformer suitable for switching power supplies, featuring a ferrite core. We offer models such as "ER-28-BZ," "ER-28L-BZ," and "ER-35-BZ" in our lineup. With a wide variety of options, we can meet a broad range of needs. Additionally, we have a diverse selection of special sizes available, so please feel free to consult us. [Features] - Utilizes a ferrite core - Ideal for switching power supplies - Abundant variations - A wide variety of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

"FHX" is a transformer that uses a ferrite core. It is suitable for switching power supplies. With a wide variety of options available, we can meet a broad range of requests. Additionally, we offer many different special sizes, so please feel free to consult with us. [Features] - Uses a ferrite core - Suitable for switching power supplies - Rich variety of options - Many different special sizes available *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "OIE" is a flat-type transformer that uses an OI core. We offer models such as the "00-08-DD" with a maximum capacity of 6.0VA, the "00-12-DD" with a maximum capacity of 9.0VA, and the "01-56-DD" with a maximum capacity of 130.0VA. The primary and secondary windings are separated, complying with international safety standards. 【Features】 ■ Uses OI core ■ OI core, flat type ■ Primary and secondary windings are separated ■ Complies with international safety standards ■ Safety standards: PSE UL CSA *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

We would like to introduce our wound core horizontal transformer 'WCQ'. We offer a wide range of models, including the "01-00-AA" with a maximum capacity of 80.0VA and the "15-00-AA" with a maximum capacity of 1,200.0VA. These are suitable for situations where height restrictions apply due to installation methods. Additionally, the transformer is designed with a clamp frame type to allow for the use of terminal blocks, and it utilizes a bobbin structure where the primary and secondary coils are separated, making it compliant with international safety standards. 【Features】 ■ Ideal for situations with height restrictions due to installation methods ■ Designed with a clamp frame (angle) type to allow for the use of terminal blocks ■ Utilizes a bobbin structure with separated primary and secondary coils ■ Compliant with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "WAQ" is a transformer finished in a clamp frame (angle) type to allow the use of terminal blocks. It uses a bobbin structure where the primary and secondary coils are separated, and it complies with international safety standards. It is suitable for situations where there are width restrictions in the installation method. Additionally, we offer models such as "01-00-AA" with a maximum capacity of 80.0VA, "01-50-AA" with a maximum capacity of 120.0VA, and "02-00-AA" with a maximum capacity of 160.0VA. 【Features】 ■ Suitable for situations where there are width restrictions in the installation method ■ Finished in a clamp frame (angle) type to allow the use of terminal blocks ■ Uses a bobbin structure where the primary and secondary coils are separated ■ Complies with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "WBQ" is a transformer suitable for situations where there are height restrictions due to installation methods. We offer models such as "01-00-AA" with a maximum capacity of 80.0VA, "01-50-AA" with a maximum capacity of 120.0VA, and "02-00-AA" with a maximum capacity of 160.0VA. Additionally, we use a bobbin structure where the primary and secondary coils are separated, ensuring compliance with international safety standards. 【Features】 ■ Ideal for situations with height restrictions due to installation methods ■ Uses a bobbin structure with separated primary and secondary coils ■ Complies with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

We would like to introduce our cut-core vertical transformer 'VCZ'. Since it uses a cut-core, it is smaller and lighter compared to EI-type transformers. Please choose the most suitable option from a wide variety of selections. Additionally, various terminals can be selected. 【Features】 ■ Uses a cut-core ■ Smaller and lighter compared to EI-type transformers ■ Choose from a wide variety of options ■ Various terminals available ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

"HCZ" is a transformer that uses a cut core, making it smaller and lighter compared to EI type transformers. We offer a wide lineup including "C6.3ZA," "C008ZA," "C010ZA," and "C16AZA." Please choose the most suitable option from our rich variety. Additionally, various terminals can be selected. 【Features】 ■ Uses a cut core ■ Smaller and lighter compared to EI type transformers ■ Ability to choose from a wide variety of suitable options ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "VBZ" is a transformer of the clamp frame (angle) type. It uses a layer paper coil with interlayer paper inserted between each layer. You can choose the most suitable option from a wide variety. Additionally, it comes with a terminal block for easy wiring with crimp terminals. 【Features】 ■ Clamp frame (angle) type ■ Uses a layer paper coil with interlayer paper inserted between each layer ■ Allows selection of the optimal option from a wide variety ■ Comes with a terminal block for easy wiring with crimp terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HBZ" is a transformer of the clamp frame (angle) type. It includes models such as the "4H-29-ZB" with a maximum capacity of 60.0VA, the "4I-40-ZB" with a maximum capacity of 100.0VA, and the "4K-50-ZB" with a maximum capacity of 210.0VA. It uses rare paper coils with interlayer paper inserted between each layer, allowing you to choose the most suitable option from a wide variety. Additionally, it comes with a terminal block for easy wiring with crimp terminals. 【Features】 ■ Clamp frame (angle) type ■ Uses rare paper coils with interlayer paper inserted between each layer ■ Options available from a wide variety ■ Comes with a terminal block for easy wiring with crimp terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

We would like to introduce the transformer "VNZ" that we handle. It features a rare paper type with interlayer paper inserted between each layer. We offer a wide variety of options, making it compatible with any terminal. Additionally, we have models available with a maximum capacity of 60.0VA ("4H-29-ZB"), 70.0VA ("4H-35-ZB"), and 100.0VA ("4I-40-ZB"), up to a maximum capacity of 440.0VA. 【Features】 ■ Rare paper type with interlayer paper inserted between each layer ■ Clamping frame (angle) type ■ Wide variety of options ■ Compatible with any terminal ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HNZ" is a layer-type transformer with interlayer paper inserted between each layer. It features a clamp frame (angle) type and offers a wide variety of options, making it compatible with any terminal. Additionally, we have a rich selection available, including the "4H-29-ZB" with a maximum capacity of 60.0VA, the "4H-35-ZB" with a maximum capacity of 70.0VA, and the "4K-50-ZB" with a maximum capacity of 210.0VA. 【Features】 ■ Layer-type transformer with interlayer paper inserted between each layer ■ Clamp frame (angle) type ■ Wide variety of options ■ Compatible with any terminal ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "VNR" is a transformer of the clamp frame (angle) type. It is available in models such as "4H-50-AB" with a maximum capacity of 80.0VA and "4I-50-AB" with a maximum capacity of 120.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. Additionally, an insulating cover is placed over the primary winding to ensure separation from the secondary winding, and it complies with international safety standards. However, the only terminals that can be used are lead wires. 【Features】 ■ Clamp frame (angle) type ■ Insulating cover over the primary winding to ensure separation from the secondary winding ■ Complies with international safety standards ■ Usable terminals are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

We would like to introduce our company's clamp frame (angle) type transformer "HNR." An insulating cover is placed over the primary winding to ensure separation from the secondary winding, making it compliant with international safety standards. However, only lead wires can be used as terminals. We also offer models with maximum capacities such as 80.0VA "4H-50-AB," 120.0VA "4I-50-AB," and 130.0VA "4I-55-AB." 【Features】 ■ Clamp frame (angle) type ■ Insulating cover over the primary winding for separation from the secondary winding ■ Compliant with international safety standards ■ Terminals available for use are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "VNQ" is a transformer of the clamp frame (angle) type. It is available in a lineup including the "4G-40-CB" with a maximum capacity of 40.0VA, the "4H-40-CB" with a maximum capacity of 70.0VA, and the "4H-50-CB" with a maximum capacity of 80.0VA. This is a two-layer type that complies with international safety standards, with the primary and secondary windings wound on separate bobbins, and the only terminals that can be used are lead wires. 【Features】 ■ Complies with international safety standards ■ Two-layer type with primary and secondary windings on separate bobbins ■ Only lead wires can be used as terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HNQ" is a transformer of the clamp frame (angle) type. It is a two-layer type with separate bobbins for the primary and secondary windings, compliant with international safety standards. Note that only lead wires can be used as terminals. We also offer models such as the "4G-40-AB" with a maximum capacity of 40.0VA, the "4H-40-AB" with a maximum capacity of 70.0VA, and the "4H-50-AB" with a maximum capacity of 80.0VA. 【Features】 ■ Compliant with international safety standards ■ Two-layer type with separate bobbins for primary and secondary windings ■ Terminals that can be used are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "VNI" is a transformer of the clamp frame (angle) type. It features a bobbin structure with the primary and secondary windings separated and an insulating cover, complying with international safety standards. However, only lead wires can be used for the terminals. 【Features】 ■ Primary and secondary windings are separated ■ Bobbin structure with insulating cover ■ Complies with international safety standards ■ Terminals can only use lead wires ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HNI" is a transformer of the clamp frame (angle) type. We offer the "4G-40-AB" with a maximum capacity of 40.0VA. The conditions for maximum capacity are 50/60Hz, with one circuit for input and output each. The primary and secondary windings are separated, featuring a bobbin structure with an insulating cover, and it complies with international safety standards. However, only lead wires can be used for the terminals. 【Features】 ■ Box-type bobbin, horizontal angle ■ Safety standards: PSE UL CSA EN ■ Primary and secondary windings are separated, with an insulating cover in a bobbin structure ■ Complies with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "VNE" is a transformer of the clamp frame (angle) type. Only lead wires can be used for the terminals. The primary and secondary windings are separated and comply with international safety standards. We offer models such as the "4G-30-AB" with a maximum capacity of 40.0VA, the "4G-35-AB" with 45.0VA, and the "4G-40-AB" with 50.0VA. 【Features】 ■ Split bobbin, vertical angle ■ Safety standards: PSE UL CSA ■ Primary and secondary windings are separated ■ Complies with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HNE" is a transformer of the clamp frame (angle) type. It separates the primary and secondary windings and complies with international safety standards. However, only lead wires can be used for the terminals. We offer models such as "4G-30-AB" with a maximum capacity of 40.0VA and "4H-50-AB" with a maximum capacity of 100.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Split bobbin, horizontal angle ■ Safety standards: PSE UL CSA ■ Separation of primary and secondary windings ■ Compliance with international safety standards ■ Terminals can only use lead wires *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "VNA" is a transformer that adopts a high-efficiency coaxial winding and a clamp frame (angle) type. It is available in maximum capacities ranging from 35.0VA to 320.0VA. There is a wide variety of product options, and terminals can also be freely selected. Additionally, it complies with the safety standard PSE. 【Features】 ■ Standard bobbin, vertical angle ■ Safety standard: PSE ■ Adopts high-efficiency coaxial winding ■ Wide variety of product options ■ Terminals can be freely selected *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HNA" is a transformer that employs a high-efficiency coaxial winding and features a clamp frame (angle) design. It complies with the safety standard PSE. There is a wide variety of product options available, and terminals can be freely selected. We offer models including the "4G-25-AB" with a maximum capacity of 35.0VA, the "4G-30-AB" with 40.0VA, and the "4L-60-AF" with 320.0VA. 【Features】 ■ Standard bobbin and horizontal angle ■ Safety standard: PSE ■ High-efficiency coaxial winding ■ Wide variety of product options ■ Terminals can be freely selected *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BVU" is a channel frame (band cover) type transformer. It is a two-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. This model is designed for mounting on printed circuit boards. We offer the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BA" with a maximum capacity of 25.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Pin-type two-layer bobbin, vertical (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Compliant with international safety standards ■ Designed for mounting on printed circuit boards *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BHU" is a channel frame (band cover) type transformer. It is a dual-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. We offer the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BB" with a capacity of 25.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Pin-type dual-layer bobbin, horizontal (band) ■ Safety standards: PSE UL CSA EN ■ Dual-layer type with primary and secondary windings wound on separate bobbins ■ Compliant with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BVS" is a channel frame (band cover) type transformer that implements a printed circuit board in the transformer. We offer models starting with the "57-30-AC" with a maximum capacity of 18.0VA, as well as the "60-30-AA" with 20.0VA and the "66-30-AC" with 23.0VA. It features a dual-layer design with primary and secondary windings wound on separate bobbins and complies with international safety standards. 【Features】 ■ Dual-layer bobbin, vertical type (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board in the transformer ■ Dual-layer design with primary and secondary windings on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BHS" is a channel frame (band cover) type transformer that implements a printed circuit board in the transformer. It features a two-layer design with primary and secondary windings wound on separate bobbins, compliant with international safety standards. We offer models such as the "57-30-AA" with a maximum capacity of 18.0VA and the "60-30-AA" with a capacity of 20.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Two-layer bobbin, horizontal type (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board in the transformer ■ Two-layer design with primary and secondary windings on separate bobbins ■ Compliant with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

"BVK" is a channel frame (band cover) type transformer. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. This type is designed to mount a printed circuit board onto the transformer, with options available such as the "28-11-BC" with a maximum capacity of 1.0VA and the "35-12-BC" with 2.0VA. 【Features】 ■ Pin-type box bobbin, vertical (band) ■ Safety standards: PSE UL CSA EN ■ Type that mounts a printed circuit board onto the transformer ■ Primary and secondary windings are separated to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BHK" is a channel frame (band cover) type transformer. It is a type that implements a printed circuit board in the transformer. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. 【Features】 ■ Pin-type box bobbin, horizontal (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board in the transformer ■ Primary and secondary windings are separated to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HPV" is a two-layer type transformer with the primary and secondary windings wound on separate bobbins. We offer the "41-14-BZ" with a maximum capacity of 3.0VA and the "41-17-BZ" with 4.0VA. The bobbin structure allows for a longer creepage distance, resulting in higher dielectric strength. 【Features】 ■ Pin-type two-layer bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Bobbin structure allows for a longer creepage distance ■ Higher dielectric strength can be achieved *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HPU" is a printed circuit board mounted transformer. It is a two-layer type with primary and secondary windings wound on separate bobbins. It complies with international safety standards. We offer models such as "28-11-BZ" with a maximum capacity of 0.8VA and "35-10-BZ" with 1.5VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Pin-type dual-layer bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "FPH" is a low-profile transformer for printed circuit board mounting. Compared to conventional transformers, it has a lower height and features a structure that is resistant to disconnection due to the use of U-shaped pins, allowing for even lower mounting by drilling holes in the board. Our lineup includes the "35-08" with a maximum capacity of 1.0VA, as well as the "48-06" with 2.5VA and the "57-10" with 7.0VA. 【Features】 ■ Pin-type split bobbin, low-profile ■ Safety standard: PSE ■ Lower height compared to conventional transformers ■ Structure resistant to disconnection due to the use of U-shaped pins ■ Allows for even lower mounting by drilling holes in the board *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "HPC" is a transformer of the printed circuit board mounting type. It complies with "PSE UL CSA." To enhance safety, it features a bobbin structure with a long creepage distance between the primary and secondary windings. We offer the "35-10-BZ" with a maximum capacity of 1.5VA, and the conditions for maximum capacity are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Pin-type bobbin, horizontal type ■ Safety standards: PSE UL CSA ■ Bobbin structure with a long creepage distance between the primary and secondary windings *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "FPL" is a type of transformer that is resistant to disconnection by adopting an L-shaped pin. We offer "28-12" with a maximum capacity of 1.0VA and "35-12" with a maximum capacity of 2.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. 【Features】 ■ L-shaped pin type split bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Separation of primary and secondary windings to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

"FPK" is a transformer with a printed circuit board pin mounting type. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. We offer models such as the "28-11-BZ" with a maximum capacity of 1.0VA, the "35-12-BZ" with 2.0VA, and the "41-17-BZ" with 5.0VA. 【Features】 ■ Pin-type split bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Separation of primary and secondary windings to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "FPG" is a transformer of the printed circuit board mounting type. We offer the "28-11-AZ" with a maximum capacity of 1.0VA and the "35-10-AZ" with a maximum capacity of 1.8VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. By separating the primary and secondary windings, it complies with international safety standards. 【Features】 ■ Pin-type split bobbin, horizontal type ■ Safety standards: PSE UL CSA ■ Separation of primary and secondary windings *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BVQ" is a two-layer bobbin, vertical type transformer with a channel frame (band cover) design. The terminals are only lead wires. To comply with international safety standards, it features a two-layer type with primary and secondary windings wound on separate bobbins. Additionally, the maximum capacity ranges from 8.0VA to 40.0VA. 【Features】 ■ Two-layer bobbin, vertical type (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals are only lead wires *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BHQ" is a two-layer bobbin, horizontal type transformer with a channel frame (band cover) design. It is available in maximum capacities ranging from 8.0VA to 40.0VA. To comply with international safety standards, it features a two-layer design with primary and secondary windings wound on separate bobbins. However, the terminals are only lead wires. 【Features】 ■ Two-layer bobbin, horizontal type (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals are only lead wires *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

We would like to introduce our transformer "BVM." It features a bobbin structure that separates the primary and secondary windings, with each coil placed in an insulated box, and complies with international safety standards. Additionally, we offer a lineup ranging from a maximum capacity of 1.5VA to 30.0VA, with terminals available for lead wires only. 【Features】 ■ Channel frame (band cover) type ■ Separation of primary and secondary windings ■ Bobbin structure with each coil in an insulated box ■ Complies with international safety standards ■ Terminals available for lead wires only *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BHM" is a channel frame (band cover) type transformer. It complies with international safety standards, and only lead wires can be used for the terminals. The primary winding and secondary winding are separated, and each coil is housed in an insulated box with a bobbin structure. We offer a lineup with maximum capacities ranging from 1.5VA to 30.0VA. 【Features】 ■ Channel frame (band cover) type ■ Primary winding and secondary winding are separated ■ Each coil is housed in an insulated box with a bobbin structure ■ Complies with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF materials or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

The "BVI" is a channel frame (band cover) type transformer. It features a bobbin structure with separated primary and secondary windings and an insulating cover. It complies with international safety standards, and the terminals are only lead wires. Additionally, it includes models such as the "41-17-AC" with a maximum capacity of 5.0VA and the "48-21-AC" with a maximum capacity of 7.0VA. 【Features】 ■ Channel frame (band cover) type ■ Separated primary and secondary windings ■ Bobbin structure with insulating cover ■ Complies with international safety standards ■ Terminals are only lead wires *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers

"BHI" is a channel frame (band cover) type transformer. The terminals are only lead wires. The primary and secondary windings are separated, and it features a bobbin structure with an insulating cover, complying with international safety standards. The maximum capacity conditions are 50/60Hz, with one circuit for input and output, and we offer maximum capacities ranging from 5.0VA to 40.0VA. 【Features】 ■ Channel frame (band cover) type ■ Separation of primary and secondary windings ■ Bobbin structure with insulating cover ■ Complies with international safety standards *For more details, please refer to the PDF document or feel free to contact us.

• transformer
• Converters and Transducers
• Transformers