Nitto L Materials Product Lineup

To ensure safe and prompt evacuation during a disaster while protecting personal safety, securing visibility is crucial. One measure for power outages is the use of glow-in-the-dark tape, which releases stored light in the dark. Glow-in-the-dark tape allows for visibility without consuming electricity, and the duration of its glow varies by product, ranging from several minutes to several hours, or even over 10 hours. Choosing the appropriate product can optimize effectiveness and cost. Nitto Elmaterial provides resources to assist in selecting glow-in-the-dark tape. 1. [Quick Reference] Comparison Chart of Glow-in-the-Dark Tape by Grade A comparison chart that clearly shows brightness, afterglow time, and cost, making it easy to compare recommended uses. 2. Proposal Document for Utilizing "Glow-in-the-Dark Tape" This document introduces specific examples of installation locations and methods. 3. [With Use Cases] Explanation of Challenges and Selection Points for Glow-in-the-Dark Tape as a Disaster Prevention Measure This section discusses the challenges and selection points of "glow-in-the-dark tape" as a disaster prevention measure and presents three recommended uses for glow-in-the-dark tape. *For more details, please download the PDF or contact us directly.*

• Adhesive tape

To ensure safe and prompt evacuation during a disaster while protecting personal safety, securing visibility is crucial. One of the measures for power outages is the use of glow-in-the-dark tape, which releases stored light in the darkness. Glow-in-the-dark tape allows for visibility without consuming electricity, and the duration of its glow varies by product, ranging from several minutes to several hours, or even over 10 hours. Choosing the appropriate product can optimize effectiveness and cost. We introduce the challenges and selection points of "glow-in-the-dark tape" as a disaster prevention measure, as well as three use cases for glow-in-the-dark tape. Please check the document download titled "Explanation of the Challenges and Selection Points of Glow-in-the-Dark Tape as a Disaster Prevention Measure."

• Adhesive tape

"No.923S" is a tape made from a high-strength film of orange-colored polytetrafluoroethylene (PTFE) resin, with surface treatment applied to one side and a heat-resistant silicone adhesive coated on the treated surface. It can be used for general sliding applications by adhering it to metals, plastics, ceramics, and more. It possesses excellent characteristics, including electrical properties, heat resistance, chemical resistance, and non-stick properties. 【Features】 - The non-stick side has excellent properties of polytetrafluoroethylene resin, including electrical properties, heat resistance, weather resistance, chemical resistance, water resistance (water repellency), and non-stick properties. - Excellent tensile strength. - Excellent flame resistance. *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"No.923UL" is a tape made from NITOFLON (Nitoflon) No. 920UL (a high-strength film made of polytetrafluoroethylene resin) as the base material, with surface treatment applied to one side and a heat-resistant silicone adhesive coated on the treated surface. It is suitable for applications such as roll wrapping with polyethylene laminators. It has excellent characteristics, including electrical properties, heat resistance, chemical resistance, and non-stick properties. 【Features】 ■ The non-stick side possesses excellent properties of polytetrafluoroethylene resin, including electrical properties, heat resistance, weather resistance, chemical resistance, water resistance (water repellency), and non-stick properties. ■ Excellent tensile strength ■ Excellent flame resistance *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

The "No.923SL" is a tape made from a high-strength film of polytetrafluoroethylene (PTFE) as the base material, with one side treated with an adhesive that is a silicone-based and has excellent heat resistance. It can be used over a wide temperature range (-60 to 200°C). (Conditions of use may vary.) It possesses numerous excellent features, including electrical properties, heat resistance, chemical resistance, and non-adhesiveness. 【Features】 ■ Excellent tensile strength ■ Excellent flame resistance ■ Usable over a wide temperature range (-60 to 200°C) *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

"No.923UT" is an adhesive tape coated with a silicone-based adhesive on a thin fluoropolymer (PTFE) film. It has excellent heat resistance, electrical insulation properties, and slip characteristics. Despite being a thin adhesive tape with a total thickness of 0.04mm, it has high tensile strength and low elongation. 【Features】 ■ Thin adhesive tape with a total thickness of 0.04mm ■ High tensile strength with low elongation ■ Excellent properties such as heat resistance, electrical insulation, slip characteristics, water repellency, and release properties on the back *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

"No.903UT" is a thin type adhesive tape with a total thickness of 0.06mm, featuring excellent properties such as heat resistance, slip resistance, and water repellency. It has obtained Flame Retardant certification against UL510 flammability standards (Registration Number E34833). It can be continuously used in a wide temperature range of -60℃ to 200℃ (recommended value). Additionally, it can be used at even higher temperatures for short periods. 【Features】 ■ Thin type with a total thickness of 0.06mm ■ Approximately 23% lighter compared to conventional products ■ Excellent heat resistance, slip resistance, and water repellency ■ Continuous use possible in a wide temperature range of -60℃ to 200℃ *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

The "MPS" series is a mold release fluoropolymer (PTFE) film that excels in heat resistance and release properties. It can be used continuously from -100°C to 260°C (recommended value), and can withstand even higher temperatures for short periods. There is a lineup of standard products, thermal expansion control products, and high strength/high thermal shrinkage products. 【Lineup】 ■MPS-10: Standard ■MPS-11: Low thermal expansion ■MPS-13: High strength/high thermal shrinkage *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

"HR-S051" is a release film that combines a polyimide film with a fluororesin (PTFE) layer. Due to its thinness, it has excellent thermal conductivity and can be used at high temperatures above 300°C. It possesses the thermal stability of PI and the release properties of PTFE, excelling in heat resistance, mechanical strength, dimensional stability, and release properties. 【Features】 ■ Combines the thermal stability (mechanical strength, dimensional stability) of polyimide with the release properties of PTFE ■ Excellent heat resistance, usable as a release film even at high temperatures of 300°C ■ Thin, providing excellent thermal conductivity *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials
• Composite Materials

"No.901UL" is a product that has been surface-treated to facilitate adhesion on one side of a fluororesin (PTFE) film, which excels in chemical resistance, electrical properties, and weather resistance. It can be adhered to substrates using adhesives or double-sided tape. The characteristics other than surface adhesion conform to the original product properties, exhibiting excellent heat resistance, electrical insulation, slip resistance, and chemical resistance. 【Features】 ■ A wide range of thicknesses from 0.05 to 1.0 mm ■ The treated surface can be adhered using commercially available adhesives and adhesive tapes ■ Certified against UL94 flammability standards (V-0 or VTM-0, registration number E52859) *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

"No.920UL" is an extremely thin non-adhesive film that does not contain filling materials. Its tensile strength is about twice that of NITOFLON cutting film, and its dielectric breakdown voltage is about 1.5 times higher. It is suitable for insulation coatings and spacers for electrical components, especially for motors, transformers, and field coils, as well as for interlayer insulation and insulation in slots. 【Features】 ■ Tensile strength is about twice that of NITOFLON cutting film, and dielectric breakdown voltage is about 1.5 times higher ■ Extremely thin film with a thickness of 20μm can also be produced ■ Non-adhesive with a smooth surface *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials
• Composite Materials

The Elrain System "Multimedia Wiring" enables the construction of homes that meet the demands of ICT acceleration by providing high-speed LAN wiring during new construction. 【Features】 ■ Information Distribution Board Typically, when internet line work is done after new construction, LAN cables are passed through available empty conduits in advance. However, depending on the wiring location, it can be difficult to find a place for the Wi-Fi router, and exposed wiring can be an obstruction. The information distribution board allows for the storage of hubs such as ONUs and routers, enabling centralized and unified management. ■ LAN Cable A set of LAN cables that enable high-speed connections with Category 6A (CAT6A) is included. It supports internet environments where communication speeds of 10Gbps are recommended for activities such as gaming, streaming, stock trading, and online medical consultations. There will be no issues even as communication infrastructures like "5G" and "Wi-Fi 6" become widespread in the future. * After the handover of a new construction, the rules for CAT6A installation are strict, making it difficult to implement. ■ LAN Modular Jack Sockets are installed to allow LAN cables to be inserted into appropriate rooms. By conducting construction with an eye on the router installation environment, it creates a setting where signals can connect easily without interference from the layout.

• LAN/Optical cable
• LAN construction and wiring work
• Wireless LAN

【Features】 It can be applied to various uneven surfaces outdoors. Since it uses aluminum foil as the base material, it fits securely on uneven surfaces. Additionally, its excellent durability ensures that the anti-slip effect lasts for a long time. ☆ We also offer the "Non-Slip Tape LS," which is more affordable and comes in a wide variety of colors. For more details, please refer to the related links or catalogs.

• Other safety and hygiene products
• Other consumables
• Adhesive tape

No.5000NS is a double-sided tape made of flexible and durable non-woven fabric, using an acrylic-based adhesive that adheres well to various substrates. 【Features】 - The strong non-woven fabric substrate provides high tensile strength, making it difficult to tear the tape when removed. This allows for clean removal. - Even after long-term application, it leaves minimal adhesive residue and has excellent re-peelability. It is a double-sided adhesive tape that allows for recycling of the substrate upon removal. - It has a higher adhesive strength compared to standard double-sided tapes. - It has a wide range of applications and temperature ranges, making it ideal for securing components. - It firmly adheres to difficult-to-bond plastics such as polypropylene and polystyrene. ☆ For detailed test data on adhesive strength, re-peelability, holding power, strength, etc., please refer to the material download [data sheet]. ☆ Samples (A4 size) are available. Please feel free to contact us. ☆

• Adhesive tape
• Other Auto Parts
• glue

The process of unwinding tape ⇒ cutting ⇒ sticking is quite challenging when done continuously in large quantities. Depending on the operator, the cutting lengths may vary, and it can also be difficult to stick at a fixed length. The 'AS-7' simplifies the sticking process and makes cost management easier. ★Features★ ■ Manual Mode & Automatic Mode - Switchable Depending on your work style, you can choose between manual mode, where you press a switch to unwind one piece at a time, and automatic mode, which unwinds automatically. ■ Diverse Specifications In addition to standard specifications, we meet various needs through combinations with options such as narrow widths and non-adhesive compatibility. ■ Compatible with Various Tapes It supports cutting various types of tape, including packaging craft tape, OPP tape, cloth tape (duct tape), cellophane tape, and aluminum tape. ■ Ease of Use The cutter unit, which is a consumable part, can be easily removed and replaced. Additionally, its compact size means it takes up little space and is easy to move, making it suitable for any workspace. ■ After-Sales Service We support the replacement of various parts.

• Taping Machine
• cutter
• dispenser

【Features】 This is an aluminum foil adhesive tape coated with an acrylic-based adhesive on 50μ thick soft aluminum foil. It uses a strong adhesive type of acrylic-based adhesive, providing stable adhesion performance. Custom sizes are also available, so please feel free to contact us. 【Product Lineup】 ◆LM-101 With release paper, no gloss ◆LM-102 With release paper, with gloss ◆LM-103 Without release paper, no gloss LM-101 has the matte side of the aluminum foil facing out, while LM-102 has the glossy side facing out. Both varieties do not have any surface treatment on the front side of the aluminum foil.

• Adhesive tape
• aluminum
• Repair Agent

**Features** ■ Three-layer reinforced film with strong adhesion and high holding power It has high durability and lasts long even on floors where forklifts and other vehicles operate. ■ Easy to apply The tape does not stretch, making it less likely to wrinkle and easy to apply straight. It is also easy to work with alone. ■ Easy to remove The film and adhesive are firmly bonded, making it less likely to leave residue. ■ Strong tape With a sturdy film and powerful adhesive, it is resistant to tearing and peeling. ■ Rich color variations A lineup of colors used for color coding (safety colors) such as yellow = caution, red = fire prevention, prohibition, stop, green = safety, evacuation, hygiene, etc. ■ Can be applied on oily surfaces (DLT-NEO) DLT-NEO uses a special adhesive that is highly resistant to oil, making it less likely to deteriorate or peel in environments where oils and other substances can erode the tape.

• Other safety and hygiene products
• Adhesive tape
• Other markings

Currently, the rapid penetration of information and communication technology into everyday life and business has increased our dependence on electricity and communication. In the event of a power outage, it can have serious impacts on business operations, making the importance of power outage preparedness even greater. In this document, we will introduce the power outage risks that companies should avoid and the measures they should take to address them. Based on recent disaster situations, it will explain the risks associated with power outages, such as delays in evacuation and fires, as well as countermeasures and the formulation of business continuity plans (BCP), and effective ways to use photoluminescent tape for evacuation guidance. Please take a look at the PDF download. 【Recommended for】 - Those who want to understand the risks associated with power outages - Those who want to prepare for power outages but are unsure of what specific actions to take - Those who would like to know about immediate power outage measures

• Adhesive tape
• Other safety and hygiene products
• LED lighting

During disasters such as earthquakes and fires, power outages can occur, leading to delays in evacuation in smoke or darkness. With glow-in-the-dark tape, you can easily secure evacuation routes just by applying it. ■ Glow-in-the-dark = a property that stores light and releases it in dark places ■ It emits a brightness that overturns the previous perception that "glow-in-the-dark tape does not shine." ■ It greatly exceeds the brightness specified by domestic JIS standards. ■ There are three brightness ranks: JD > JC > JB ■ JD and JC are also compatible with LEDs ☆ We are currently offering a "Glow-in-the-Dark Tape Utilization Proposal" that is useful for evacuation guidance, indicating obstacles, and emergency staircases. More details can be found in the downloadable materials. ☆ An essential information site for factory safety managers can be accessed via the link below.

• Adhesive tape
• Other safety and hygiene products
• Rare metals

**What is Eptsealer?** Eptsealer is a foam created through Nitto's unique foaming technology, featuring a semi-continuous and semi-independent foaming structure. In addition to sealing applications that leverage its foaming structure, it can be used for a wide range of purposes such as shock absorption and thermal insulation. We offer a rich lineup that can be differentiated based on applications, including flame retardant, soft, and high-foaming options. It is used in various fields such as automobiles, housing, and home appliances. Composed mainly of EPDM rubber, it possesses excellent properties among general-purpose rubbers, including heat resistance and chemical resistance (to acids and alkalis). **About the EH-2200 Series** The EH-2200 series is a standard sealing material of a semi-independent and semi-continuous type made from foamed EPDM rubber. It is a clean foam that does not contain sulfur, which is commonly used in rubber crosslinking and raises concerns about metal corrosion. By not using sulfur, it retains the properties of EPDM while reducing the risk of corrosion to metals (such as copper wires on electronic circuit boards). It can be used in high-sealing electronic devices that are becoming smaller, without corroding metals, for cushioning, soundproofing, and dustproofing applications. At Nitto Elmaterial, we respond to customer requests by utilizing a network of diverse processing companies to accommodate a wide range of processing needs.

• Other Auto Parts
• Other electronic parts
• Rubber

Nitto's thermal release sheet "Riva Alpha" has adhesive properties at room temperature and can be easily peeled off simply by heating, making it a unique adhesive sheet. It significantly contributes to automation and labor-saving in various manufacturing processes of electronic components. ■ What is thermal release? It was developed targeting a process where components and devices are firmly bonded during processing, and after heat treatment, the adhesive strength is lost, allowing for natural release. At room temperature, it adheres like a regular adhesive sheet. When you want to peel it off, simply heating it causes the adhesive layer to foam, reducing the adhesive area and allowing for natural release. ■ Mechanism of thermal release The thermal release adhesive layer contains capsules that expand when heat is applied. Therefore, when heat is applied, the capsules expand, creating a rough surface on the thermal release adhesive layer, which eliminates the adhesive strength and allows for natural peeling from the substrate.

• Other semiconductors
• Other semiconductor manufacturing equipment
• Separation device

"Elk Light Lemon" is a tape that stands out 24 hours a day with its features of "high-brightness phosphorescence" that glows in the dark and "fluorescence" that is noticeable during the day. "Phosphorescence" means it absorbs light energy and emits it in dark places (no power supply needed). The absorbed light is gradually released, but it can repeat the phosphorescence when exposed to light again. "Fluorescence" means it converts ultraviolet light into visible light, appearing more vivid than regular colors (material that glows under black light). It is suitable for alerting in daytime or well-lit environments. During the day or in bright places, it emits fluorescent yellow due to fluorescent lights or sunlight. At night, in dark places, or during power outages, it absorbs light from sunlight, fluorescent lights, or white LEDs and glows for about 8 hours in the dark. It can be used for various hazard markings, improving visibility, and disaster prevention purposes. It's a measure against near-miss incidents! 【Features】 ■ Absorbs light from sunlight, fluorescent lights, white LEDs, etc., and glows in the dark for "about 6 to 8 hours" (JIS Z 9107 JC class level) ■ Emits fluorescent lemon yellow due to fluorescent lights or sunlight ■ Superior flexibility compared to typical phosphorescent tapes

• Adhesive tape
• Other safety and hygiene products
• LED lighting

【Features】 The surface uses skin-friendly particles, allowing you to walk barefoot without getting hurt. ● Excellent water resistance and high-temperature resistance. ● Contains anti-mold agents, making it suitable for humid areas such as bathrooms. ● The transparent color does not compromise the design of the underlying surface. It is also suitable for situations where you do not want it to stand out. For slip and fall prevention!

• Other safety and hygiene products
• Adhesive tape

The reliability of rainwater management is a crucial factor that influences construction quality. Particularly in recent years, high airtightness and high thermal insulation homes have revealed risks of rainwater intrusion that traditional ventilation structures cannot adequately address, making the selection of waterproof tape and the precision of its application increasingly important. This document explains the role and performance requirements that waterproof tape should fulfill, based on actual data on waterproofing troubles, and presents a framework for selecting the optimal products through a comparison of the characteristics of the mainstream "butyl-based" and "acrylic-based" tapes. Additionally, we introduce the advantages from a practical perspective, incorporating the structural and performance verification results of Nitto's newly launched all-weather waterproof tape series. We encourage you to review this document for insights that can help reduce the risk of rainwater intrusion and support the long-term performance of buildings.

• Adhesive tape
• Rubber
• others

【About Line Tape】 Line tape is an adhesive tape primarily used for marking areas and indicating hazards on floors and other surfaces. It serves as a marker simply by being applied without the need for painting. This product, ideal for 5S practices, is something that anyone has likely seen in places like gymnasiums, hospitals, and warehouses. It is a standard tool used for preventing near-miss incidents. 【Types】 ☆ If you want to color-code → "Line Tape E Series" Available in green, yellow, red, blue, white, and orange. This selection of colors is necessary when adhering to JIS standards. (Red = Prohibited, Yellow = Caution, Green = Safety. Source: DIC Color Design https://www.dic-color.com/knowledge/business/jis_safety_color.html) ☆ For more visibility, use "Fluorescent Tape" ☆ If you want to apply it to uneven surfaces → "Rough Surface Line Tape LS" Thick and soft rubber-based adhesive material conforms well to the ground. ☆ For hazard indication or caution → "Tora Line Tape" Yellow and black striped tape. Adheres well and peels off cleanly. ☆ To prevent peeling → "Overcoat Tape" Highly transparent, applying it on top increases durability. *For more details, refer to basic information, applications/case studies, and PDF materials.

• Adhesive tape
• Other safety and hygiene products
• paint

■What is phosphorescence? Phosphorescence absorbs light energy from sources such as white fluorescent lights, white LED lights, and the sun, and emits light in dark places. In reality, it also emits light in bright areas, but it cannot be seen due to the surrounding brightness. Since phosphorescence emits light on its own after storing light energy, it does not require a power source. The stored light is gradually released, and if light is applied again, the phosphorescence can be repeated. Historically, it was referred to as "luminous" for its ability to enable visibility at night, such as on clock faces and instrument panels. ■What is fluorescence? Objects are recognized by the colors they reflect and absorb from the light they receive. Normally, they cannot receive energy beyond the visible light spectrum. However, fluorescence converts ultraviolet light, which has stronger energy than visible light, into visible light, making it appear more vivid than regular colors. It is suitable for visibility in environments with daylight or artificial lighting. 'Elk Light Lemon' is a tape that combines both high-brightness phosphorescence and fluorescence, ensuring safety regardless of day or night. It is a measure against near-miss incidents!

• Adhesive tape
• Other markings
• Other safety and hygiene products

What is phosphorescence? It absorbs light energy from sources such as white fluorescent lights, white LED lights, and the sun, and emits light in the dark. In reality, it also emits light in bright places, but the surrounding environment is too bright for the light to be visible. Since phosphorescent materials emit light on their own after storing light energy, they do not require a power source. The stored light is gradually released, but if exposed to light again, the phosphorescence can be repeated. Historically, it was referred to as "luminous" for its ability to make things visible at night, such as clock dials and instrument panels. Although it is expensive due to the use of rare metals, it is effective as a marker in dark places because it does not require a power source or wiring, and there are no running costs or maintenance expenses. For measures against near-miss incidents! ☆ For essential information for factory safety managers, please visit the link below.

• Adhesive tape
• Other markings
• Other safety and hygiene products

■Features • The ultra-high brightness glow-in-the-dark tape is developed for disaster prevention applications. • It emits a brightness that overturns the conventional wisdom that "glow-in-the-dark tape does not shine." • It possesses luminescence far exceeding advanced JIS standards (JD class) and advanced DIN standards (E class). • It absorbs light from fluorescent lamps, white LEDs, sunlight, etc., and glows in the dark, serving as a marker. • It can store light and emit it even in low-light environments (around 50 lux). • It can be used in a wide temperature range from -20°C to 70°C. • It is waterproof, making it suitable for outdoor use. ■What is glow-in-the-dark? It absorbs room lighting or sunlight and glows brightly in dark places. Once it stores light, it emits light on its own, so no power source is needed. The brightness after a few hours becomes dim, but if light is applied again, its luminescent ability is restored, and this property can be repeated semi-permanently. ☆ For factory safety managers, essential information can be found at the link below.

• Other safety and hygiene products
• Adhesive tape
• LED fluorescent lamp

In theme park attractions, ensuring the safety of visitors is the top priority. Particularly, movement in dark or dimly lit areas and securing emergency evacuation routes are crucial. To prevent accidents in low-visibility areas and to operate safely, products that stand out even in the dark are essential. Elk Light Lemon combines high-brightness phosphorescence and fluorescence, enhancing visibility day and night, thereby contributing to safety measures in attractions. 【Usage Scenarios】 - Pathways and stairs within attractions - Signage for emergency exits and evacuation routes - Decoration of attractions - Effects utilizing darkness 【Benefits of Implementation】 - Accident prevention through improved visibility in the dark - Smoother guidance for evacuation in emergencies - Enhanced safety of attractions - Increased sense of security for visitors

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the film industry, the visibility of props is crucial in dark scenes and special effects. Particularly in nighttime shooting or scenes that depict darkness, it is necessary to convey to the audience where the props are while ensuring safety. Props with low visibility not only hinder filming but also increase safety risks. Elk Light Lemon combines high-brightness phosphorescence and fluorescence, allowing it to glow in the dark, significantly enhancing the visibility of props. It supports safe shooting and enhances the expressiveness of films. 【Usage Scenarios】 - Props in dark scenes - Indicating emergency exits and evacuation routes - Marking hazardous areas - Special effects production 【Benefits of Implementation】 - Improved visibility of props in darkness - Realization of a safe shooting environment - Enhanced expressiveness of films

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the event industry, ensuring visibility and safety in nighttime decorations and performances in dark places is essential. Particularly in spaces with limited lighting or during emergency guidance, luminous materials become important. Elk Light Lemon stores daylight and emits light in the dark, enhancing event decorations and improving safety. [Usage Scenarios] - Nighttime event decorations - Guidance displays in dark venues - Emergency evacuation route displays - Stage decorations [Effects of Implementation] - Improved visibility at night - Enhanced atmosphere for events - Ensured safety - Smooth evacuation guidance during emergencies

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the firefighting industry, a rapid response in fire extinguishing activities is required. Particularly in situations with poor visibility, such as at night or during power outages, accurately identifying the location of fire hydrants becomes a crucial factor that can determine the success or failure of firefighting efforts. If the location of a fire hydrant is unclear, it can lead to delays in firefighting activities and potentially exacerbate damage. Elk Light Lemon combines high-brightness phosphorescence and fluorescence to clearly indicate the location of fire hydrants even in the dark, supporting swift firefighting operations. 【Usage Scenarios】 - Indication of fire hydrants - Firefighting activities at night or during power outages - Emergency evacuation guidance 【Benefits of Implementation】 - Rapid identification of fire hydrant locations - Acceleration of firefighting activities - Improved safety

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the mining industry, ensuring the safety of workers in tunnels is the top priority. Ensuring visibility in darkness and during power outages is essential for accident prevention. Elk Light Lemon combines high-brightness phosphorescence and fluorescence to support safety in tunnels at all times, day or night. It glows in the dark, making it useful for guiding evacuation in emergencies. 【Usage Scenarios】 * Tunnel pathway signage * Emergency exit and evacuation route signage * Application on workers' helmets and tools * Ensuring safety during power outages 【Benefits of Implementation】 * Reduced accident risk due to improved visibility in darkness * Quick evacuation guidance in emergencies * Increased safety awareness among workers

• Other safety and hygiene products
• LED lighting
• Adhesive tape

Safety measures on ships are extremely important for protecting the lives of crew members. In particular, ensuring evacuation routes during nighttime or power outages is essential for enabling swift evacuations. Evacuating in the dark can exacerbate panic and increase the risk of accidents. The high-brightness phosphorescent tape "Elk Light Lemon" stores daylight and glows in the dark, clearly indicating evacuation routes and supporting safe evacuations. 【Usage Scenarios】 - Indicating evacuation routes (stairs, corridors, entrances, etc.) - Marking the locations of fire extinguishers and lifesaving equipment - Emergency exits and evacuation guidance signs 【Benefits of Implementation】 - Evacuation routes are visible even at night or during power outages - Supports rapid and safe evacuations - Enhances crew members' safety awareness

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the aviation industry, ensuring safety during emergencies is the top priority. Especially during aircraft accidents or power outages, the swift and safe evacuation of passengers and crew is essential. Even in darkness or smoke, products with high visibility that clearly indicate evacuation routes and support safe escapes are required. The high-brightness phosphorescent tape "Elk Light Lemon" has been developed to ensure high visibility day and night, enhancing safety during emergency evacuations. 【Usage Scenarios】 * Indicating emergency exits and escape routes * Guiding evacuation routes * Marking in-flight equipment 【Benefits of Implementation】 * Ensures high visibility even in darkness or smoke * Enhances safety during emergency evacuations * Reduces passenger anxiety

• Other safety and hygiene products
• LED lighting
• Adhesive tape

On railway platforms, ensuring passenger safety is the top priority. Especially during nighttime or in dark conditions, or during power outages, the visibility of the platform decreases, increasing the risk of accidents such as falls. To ensure safe operations, improving platform visibility is essential. The high-brightness glow-in-the-dark fluorescent tape "Elk Light Lemon" shines with fluorescent colors during the day and glows in the dark at night, enhancing platform visibility and providing a safe environment. 【Usage Scenarios】 - Stairs and steps on the platform - Around platform doors - Emergency exits and evacuation routes - Train boarding and alighting areas 【Benefits of Implementation】 - Improved visibility at night and during power outages - Reduced risk of accidents - Ensured passenger safety - Strengthened disaster prevention measures

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the manufacturing industry, ensuring safety during nighttime and power outages is crucial. To protect employee safety and prevent accidents, highly visible safety signage is essential. Effective measures are required to reduce risks associated with movement and work in dark areas. Elk Light Lemon combines high-brightness phosphorescence and fluorescence to ensure visibility at all times, contributing to safety measures in manufacturing environments. 【Usage Scenarios】 - Aisles and stairs within factories - Alerts for machinery and equipment - Signage for emergency exits and evacuation routes - Nighttime work areas 【Benefits of Implementation】 - Improved visibility during nighttime and power outages - Reduced risk of accidents - Enhanced employee safety awareness - Strengthened disaster prevention measures

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the construction industry, ensuring safety during nighttime and in dark areas is the top priority. In particular, securing the routes for material delivery and the movement paths of workers is essential for accident prevention. Working in low-visibility areas increases the risk of falls and collisions. Elklight Lemon combines high-brightness phosphorescence and fluorescence, achieving high visibility regardless of day or night. It is ideal for guiding evacuation in the dark and indicating hazardous areas. 【Usage Scenarios】 - Guidance displays at nighttime construction sites - Indication of material storage areas and hazardous locations - Display of evacuation routes in emergencies 【Benefits of Implementation】 - Improved safety for nighttime work - Reduced accident risks - Enhanced safety awareness among workers

• Other safety and hygiene products
• LED lighting
• Adhesive tape

"Elk Light Lemon" is a tape that combines high-brightness phosphorescence and fluorescence, ensuring safety at all times, day or night. During the day or in bright places, it emits fluorescence due to fluorescent lights or sunlight. At night, in dark places, or during power outages, it absorbs light from sunlight, fluorescent lights, and white LEDs, glowing for about 8 hours in the dark. It can be used for marking fire extinguishers and helmets, guiding evacuation during power outages or emergencies, indicating various hazards, improving visibility, and for disaster prevention purposes. It's a measure against near-miss incidents! 【Features】 - Absorbs light from sunlight, fluorescent lights, and white LEDs, glowing for about 6 to 8 hours in the dark - Emits fluorescence due to fluorescent lights or sunlight - Far exceeds JC class standards (JIS Z 9107) - Superior flexibility compared to typical phosphorescent tapes ≪What is the difference between phosphorescence and fluorescence?≫ "Phosphorescence" emits stored light energy and glows in the dark. "Fluorescence" reacts to light (ultraviolet) and appears vivid in well-lit areas.

• Other safety and hygiene products
• LED lighting
• Adhesive tape

In the event industry, power supply is essential for lighting and sound equipment. Power outages can lead to interruptions or cancellations of events, resulting in significant losses. Smart El Line Light supplies electricity from hybrid vehicles and solar power, ensuring necessary power even during outages. 【Usage Scenarios】 - Lighting for event venues - Power supply for temporary stages - Power supply for outdoor events - Emergency exit lights 【Benefits of Implementation】 - Continuation of events during power outages - Reduced risk of event interruptions - Ensured safety for participants - Cost savings

• Generators and transmission motors
• Solar power generator
• Secondary Cells/Batteries

In the warehouse industry, ensuring lighting during power outages is crucial for the safe management of stored items. Power outages can increase the risk of damage to products and theft. The Smart El Line Light can be powered by hybrid vehicles or solar energy, ensuring lighting in the warehouse even during outages. 【Usage Scenarios】 - Lighting within the warehouse - Power supply for material storage - Safety measures during emergencies 【Benefits of Implementation】 - Ensures lighting during power outages - Enhances the safety of stored items - Ensures the safety of workers - Reduces costs

• Generators and transmission motors
• Solar power generator
• Secondary Cells/Batteries

In factories, power outages that lead to production line stoppages or work interruptions can result in significant losses. Turning off lights and halting equipment can severely reduce work efficiency and may compromise a safe working environment. The Smart El Line Light supplies electricity from hybrid vehicles and solar power, ensuring that necessary power is secured even during outages, thereby contributing to the maintenance of work efficiency. 【Usage Scenarios】 - Lighting within the factory - Backup for equipment requiring emergency power - Power supply for material storage - Ensuring communication means during disasters 【Benefits of Implementation】 - Maintains lighting and operation of some equipment during power outages - Reduces the risk of production line stoppages - Ensures the safety of workers - Cost reduction

• Generators and transmission motors
• Solar power generator
• Secondary Cells/Batteries

In a school learning environment, ensuring lighting during power outages is crucial. Particularly, if a power outage occurs during classes or exams, it can significantly disrupt learning activities. Additionally, securing lighting is essential for ensuring evacuation routes and safe movement. The Smart El Line Light can supply electricity from hybrid vehicles or solar power, ensuring necessary power even during outages. 【Usage Scenarios】 - Classroom lighting - Lighting for evacuation routes - Use as an emergency power source 【Benefits of Implementation】 - Continuation of learning activities even during power outages - Ensuring the safety of students and staff - Cost reduction

• Generators and transmission motors
• Solar power generator
• Secondary Cells/Batteries

In hospitals, patient safety and hygiene management are the top priorities. Power outages can lead to the shutdown of medical equipment and the loss of lighting, which not only disrupts surgeries and treatments but can also impact infection control measures. Maintaining a clean environment requires a reliable power supply for lighting and essential equipment, even during outages. The Smart El Line Light supplies electricity from hybrid vehicles and solar power, ensuring necessary power is available even during blackouts. 【Usage Scenarios】 - Operating room lighting - Intensive care unit power supply - Patient room lighting - Emergency lighting 【Benefits of Implementation】 - Ensures lighting during power outages, allowing medical procedures to continue - Maintains the operation of medical equipment - Continues infection control measures - Ensures the safety of patients and healthcare workers

• Generators and transmission motors
• Solar power generator
• Secondary Cells/Batteries

In an office environment, ensuring lighting during power outages is crucial. For business continuity, securing not only lighting but also communication means is essential. The Smart El Line Light can supply electricity from hybrid vehicles or solar power, ensuring the necessary power is available even during outages. 【Usage Scenarios】 - Lighting within the office - Power supply for communication devices 【Benefits of Implementation】 - Ensures lighting and communication means during power outages - Supports business continuity

• Generators and transmission motors
• Solar power generator
• Secondary Cells/Batteries